Instruction/ maintenance manual of the product AFPO-3 SL Bunn
Go to page of 8
AFPO-2 AFPO-2 SL AFPO-3 AFPO-3 SL F L AV O R IN P U T 1 2 W A T E R IN P U T RE FI LL M A I N PO W E R 2 1 1 2 3 3 3 FLA V O R OU T P U T F LA V O R O U T PU T WA T E R OU T PU T FL A V O R O U T P U .
2 28791 030912 BUNN-O-MA TIC COMMERCIAL PRODUCT WARRANTY Bunn-O-Matic Corp. (“BUNN”) warrants equipment manufactured by it as follows: 1) Airpots, thermal carafes, decanters, GPR servers, iced tea/coffee dispensers, MCP/MCA pod brewers thermal ser vers and Thermofresh servers (mechanical and digital)- 1 year parts and 1 year labor .
3 28791 071411 INTRODUCTION This equipment supplies a liquid concentrate mixed with water at various ratios to the hoppers on the dispens- ers. It is for indoor use only on a sturdy counter or shelf. USER NOTICES Carefully read and follow all notices on the equipment and in this manual.
4 Electrical Hook-Up CAUTION – Improper electrical installation will damage electronic components. 1. An electrician must provide electrical service as specified. 2. Using a voltmeter , check the voltage and color coding of each conductor at the electrical sour ce.
5 28791 121007 5. Connect one end of input hoses to the auto refill box and the other end to the product container . Product container connectors (BIB) are not supplied. Install your own interface. 6. Connect water line to auto refill box. A minimum of 20 psi (138 kPa) is required.
6 F LA VO R INPUT 1 2 W AT ER INPU T REFILL MAIN POWE R 2 1 1 2 3 3 3 FLA VO R OUT P UT FLA VO R OUT P UT W AT ER OUTP UT FLAVO R OUTP UT WA T ER OUTP U T WAT ER OUT P UT Mix ratio (water/flavor) Time for FLA VOR OUTPUT (1/2 cup) Time for W A TER OUTPUT (1 cup) 1+1 assume 20 sec.
7 FLA VOR INPUT 1 2 WAT E R INPUT REFILL MAIN POWER 2 1 1 2 3 3 3 FLA VOR OUTPUT FLA VOR OUTPUT WAT E R OUTPUT FLA VOR OUTPUT WAT E R OUTPUT WAT E R OUTPUT OPERA TING CONTROLS A. MAIN POWER ON/OFF The main power ON/OFF switch is located on the right of the front panel just above the power cord.
8 PIPING DIAGRAM (AFPO-2) 28791 121007 The only difference between the AFPO-2/3 and AFPO-2/3 SL is the SL models have a water output line and a flavor output line for each product. This allows the water and flavor to be mixed in the hoppers. Refer to the illustration below when connecting the lines.
An important point after buying a device Bunn AFPO-3 SL (or even before the purchase) is to read its user manual. We should do this for several simple reasons:
If you have not bought Bunn AFPO-3 SL yet, this is a good time to familiarize yourself with the basic data on the product. First of all view first pages of the manual, you can find above. You should find there the most important technical data Bunn AFPO-3 SL - thus you can check whether the hardware meets your expectations. When delving into next pages of the user manual, Bunn AFPO-3 SL you will learn all the available features of the product, as well as information on its operation. The information that you get Bunn AFPO-3 SL will certainly help you make a decision on the purchase.
If you already are a holder of Bunn AFPO-3 SL, but have not read the manual yet, you should do it for the reasons described above. You will learn then if you properly used the available features, and whether you have not made any mistakes, which can shorten the lifetime Bunn AFPO-3 SL.
However, one of the most important roles played by the user manual is to help in solving problems with Bunn AFPO-3 SL. Almost always you will find there Troubleshooting, which are the most frequently occurring failures and malfunctions of the device Bunn AFPO-3 SL along with tips on how to solve them. Even if you fail to solve the problem, the manual will show you a further procedure – contact to the customer service center or the nearest service center
