Instruction/ maintenance manual of the product RS602E Bulldog Security
Go to page of 14
CONTENTS AL ARM AND REMOTE ST AR TER • MODEL RS602E INST ALL A TION GUIDE • O WNER’S GUIDE T echnical Assistance All tech personnel are expertly qualified to answer any technical questions. T echnicians are available Monday through Friday from 9:00 a.
SYSTEM FEA TURES SYSTEM COMPONENTS 1 REQUIRED TOOLS 2 Four-Button Extended R ange R emotely st art your car to r un the heat er or air conditioning from an extended distance. R emote Control Ke y less Entry R emotely locks and unlocks your po wer door lock s.
TECHNIC AL ASSIST AN CE Should you need help. F irst chec k our websit e at www .bulldogsecurity .com/wires.htm or call our toll-fr ee T ech Support Hotline Monda y through Friday 9AM-8PM and Saturday 10AM-4PM EST at 800-8 78-8007.
3 MAKIN G WIRIN G CONNECTIONS 4. Insert the wir e from the unit t hrough the hole as shown. 6. Use electr ical t ape to wr ap. Be sur e to cover t he wire about two inches on eit her side of the connection. First pull t he wire t hat you ha v e just connected along side t he wire you connected to, tape and wire tie t hem toget her.
4 4. Use electr ical t ape to wr ap, be sur e to cover about 2 inches on eit her side of connection. Secur e with wir e ties as sho wn. 3. Lay upper twisted pair of wir es o ver r ight wir e as shown. Bring lower twist ed pair of wir es up to meet t he lef t wire as shown.
5 A CCESSOR Y WIRE(S) THA T POWER THE HEA TER/BLO WER MOTOR (+12V in run or on positions) This wire is also in t he main ignition switch harness usually located in the st eer ing column. Make all connections as close to t he ignition switch har ness as possible.
6 ANTENNA PLA CEMENT E MODEL REMOTE ST ARTERS Run the antenna up t he windshield pillar on the dr iv er’s side and acr oss the top of t he windshield to the cent er, behind t he rearview mir ror. Use t he antenna clips provided to hold it in place. Be sur e t o e xpose the full length of t he clear antenna.
7 CONNECTIN G THE 1 8-PIN HARNESS & 4-REL A Y HARNESS F A CTOR Y ANTI- THEFT S YSTEMS FOR GENERAL MOTORS CARS ONL Y Syst em 1 : P ASSKEY I and II sy stem (1985 and up). This system has a r esistor pill in t he ke y . Measure r esistance of the pill using a test me ter.
8 (-) Neg ative Dome Light T ype (All other v ehicles) Connect the VIOLET wir e from the 18-pin harness t o the WHITE wir e on the op tional #775 r ela y har ness. Connect the BL A CK wire on t he op tional r elay to +12V constant fused at 5 amps. Connect the BLUE wir e to gr ound.
9 HORN HONK OUTPUT (-) (Op tional part #775) The existing hor n wir e will usuall y be found in the main ignition switch har ness in the st eering column. Probe for a wir e which will r emain neutr al (in some cases ma y sho w a (+) positiv e). When the hor n is pressed t his wire will t est as a ground or (-) neg ative.
CONNECTING “T YPE B LOCKS” • If your vehicle has a “ T ype B ” door loc king system, connect the GREEN WITH BL A CK STRIPE wire from the 18-pin harness to t he door lock wire. Connect t he BR O WN WITH BLA CK STRIPE wire to t he unlock wir e.
11 INST ALL A TION PR OGRAMMING: Programming Tach/T achless S tart Pr ess and hold the br ak e, then pr ess and hold Button #3 (trunk) until the parking lights f lash thr ee (3) times. R elease Button #3. Press and r elease Button #4, t he parking lights will flash once.
12 NOTE : Onl y Cold and Hot S tart functions can be enabled at the same time. If button #1 is pr essed for programming, Cold/Ho t St art is disabled. When Buttons #2 and #3 ar e pressed, t hen the Automatic and Lo w V oltage S tarts are disabled.
1 3 Ke y less Entry Operation Pr ess button #2 (lock/unlock), the par king lights will flash once and t he doors will lock. Pr ess button #2 again, the par king lights will flash twice, the door s will unlock, and t he parking lights will r emain on for one minute or until you turn t he ignition on or pr ess the br ak e.
An important point after buying a device Bulldog Security RS602E (or even before the purchase) is to read its user manual. We should do this for several simple reasons:
If you have not bought Bulldog Security RS602E yet, this is a good time to familiarize yourself with the basic data on the product. First of all view first pages of the manual, you can find above. You should find there the most important technical data Bulldog Security RS602E - thus you can check whether the hardware meets your expectations. When delving into next pages of the user manual, Bulldog Security RS602E you will learn all the available features of the product, as well as information on its operation. The information that you get Bulldog Security RS602E will certainly help you make a decision on the purchase.
If you already are a holder of Bulldog Security RS602E, but have not read the manual yet, you should do it for the reasons described above. You will learn then if you properly used the available features, and whether you have not made any mistakes, which can shorten the lifetime Bulldog Security RS602E.
However, one of the most important roles played by the user manual is to help in solving problems with Bulldog Security RS602E. Almost always you will find there Troubleshooting, which are the most frequently occurring failures and malfunctions of the device Bulldog Security RS602E along with tips on how to solve them. Even if you fail to solve the problem, the manual will show you a further procedure – contact to the customer service center or the nearest service center
