Instruction/ maintenance manual of the product 5002PRO Bulldog Security
Go to page of 14
CONTENTS PR O-SERIES AL ARM SYSTEM MODEL 5002PR O INST ALL A TION GUIDE • O WNER’S GUIDE Syst em Features ......................................2 Syst em Components ....................................2 R equired T ools ...........................
SYSTEM FEA TURES 1 Ke yless Entry Allows y ou to remo tel y lock an unlock your po wer door loc ks ev en if the engine is running or the alar m is in v ale t mode. Active Ar ming System ar ms onl y when tr ansmitter button is pr essed. P assiv e Arming Automaticall y arms the sy stem 1 minute af ter t he last door is closed.
SYSTEM COMPONENTS TECHNIC AL ASSIST ANCE Should you need help. F irst chec k our websit e at www .bulldogsecurity .com/wires.htm or call our toll-fr ee T ech Support Hotline Monda y through Friday 9AM-8PM and Saturday 10AM-4PM EST at 800-8 78-8007.
MAKIN G WIRIN G CONNECTIONS 1. S tr ip back two inches of insulation on the wir e fr om the k e yless entry . 2. Strip back one inch of insulation on t he wir e y ou need to connect to. One Inch of Bar e W ire T wo Inches of Bar e W ire 3. Separ at e the v ehicle wire as shown.
4. Insert the wir e from the unit t hrough the hole as shown. 6. Use electr ical t ape to wr ap. Be sur e to cover t he wire about two inches on eit her side of the connection. First pull t he wire t hat you ha v e just connect ed along side the wir e you connected to, tape and wire tie t hem toget her.
4. Use electr ical t ape to wr ap, be sur e to cover about 2 inches on eit her side of connection. Secur e with wir e ties as sho wn. Use this me thod ONL Y when connecting two separ ate wir es end to end. W ir e T ie Electr ical T ape W ir e T ie LOC A TING & MAKIN G CONNECTIONS 5 Please see the wir ing chart on our w ebsite, www.
6 button #1 again to disarm t he syst em. This time the engine should start. Make sur e all your connections ar e electrically sound. N OTE : A 1N4001 diode must be used when connecting mor e than one de vice to the or ange wire as shown.
7 MOUNTING AND CONNECTIN G THE O VERRIDE SWITCH Select a location for the ov err ide switch. Y ou should be able to r each t he switch when sitting in the dr iv er's seat, but the switch should be har d to find. A typical mounting location is under t he dash.
TESTING: Door Locks Ther e are t hree basic types: “T ype A ” Door Loc k T es t (Most GMs and some Chryslers) Probe both of your door lock wires going t o the door lock switch usall y located in t he driv er’s kick panel. Att ach the clip end of your tes t light to a good chassis gr ound.
CONNECTING “T YPE C LOCKS” •If your vehicle has a “ T ype C ” door locking syst em, you will need to purchase optional part #778. Once you ha v e pur chased the r elays, follow the diagr am on page 1 8 for “ T ype C ” door locks. T YPE C - (Optional P art #778 r equired) R ev erse polar ity door locks.
10 WIRIN G DIA GRAMS FIGURE 1 1. Red (+) 12 volt constant 2. Black chassis ground 3. Gre y (+) sir en output 4. White/R ed button #2 / channel #3 (-) output: trunk pop, window r ollup, etc. 200mA max 5. White/Y ellow button #3 / channel #2 (-) output: remot e start, etc.
OPERA TING INSTR UCTIONS 1. Arming Pr ess tr ansmitter button #1 to ar m the sys tem. The sir en will chir p 1 time, the lights will flash once, t he po w er door locks will lock (if installed), and the LED will f lash slowl y indicating t he alarm is now armed.
PR OGRAMMIN G INSTR UCTIONS 11. Instant Personal P anic Pr ess and release tr ansmitt er button #4 to sound the instant panic sir en. The lights and siren will activ at e for 30 seconds and then shut of f. T o stop t he siren bef ore t he 30 seconds, press an y of the 4 tr ansmitter buttons.
3. Setting t he Shock Sensor's Sensitivity Disarm t he system, pr ess and hold button #4 for 10 seconds. The system will chir p once. Within 2 seconds, press button #1. The system will chip twice. Within 2 seconds, str ike your vehicle wit h as much force as you w ant t he alarm t o respond to.
An important point after buying a device Bulldog Security 5002PRO (or even before the purchase) is to read its user manual. We should do this for several simple reasons:
If you have not bought Bulldog Security 5002PRO yet, this is a good time to familiarize yourself with the basic data on the product. First of all view first pages of the manual, you can find above. You should find there the most important technical data Bulldog Security 5002PRO - thus you can check whether the hardware meets your expectations. When delving into next pages of the user manual, Bulldog Security 5002PRO you will learn all the available features of the product, as well as information on its operation. The information that you get Bulldog Security 5002PRO will certainly help you make a decision on the purchase.
If you already are a holder of Bulldog Security 5002PRO, but have not read the manual yet, you should do it for the reasons described above. You will learn then if you properly used the available features, and whether you have not made any mistakes, which can shorten the lifetime Bulldog Security 5002PRO.
However, one of the most important roles played by the user manual is to help in solving problems with Bulldog Security 5002PRO. Almost always you will find there Troubleshooting, which are the most frequently occurring failures and malfunctions of the device Bulldog Security 5002PRO along with tips on how to solve them. Even if you fail to solve the problem, the manual will show you a further procedure – contact to the customer service center or the nearest service center
