



Remove dust cover carton from the box. Remove the turntable protection insert.



a) Stylus pressure gauge
a)
b)
b) Batteries for remote control
c) Drive Belt
d) Fabric gloves
e)
e) Adapter for 7“singles / allen key
f) g) h)
f) Bluetooth antenna
g) Power cable
h) Remote control
Lift the wrapped turntable out of the box. 5 6 4 7 Unpack the power supply. Carefully remove the protection covering. Remove the platter & tonearm protection.





<
<
Remove the platter & wrap the drive belt around the pulley and sub platter. Put platter back on. 9 10 8 11
Install the Bluetooth antenna. Unpack the dust cover and put it on. Plug in the power supply and connect the turntable with your speakers.




13 Turn on the Juke Box with the buttons on the bottom. Control of the unit using the knob on the front.



Standby Press the knob for 3 seconds to turn the unit on.
A
B
Input selector Briefly press the knob to switch between Bluetooth > Turntable > Line In

Volume Adjust volume by turning the knob.
17 Remove the needle protection cover.
Remove tonearm twist tie.
Move the tonearm up/down with the lever. Put feltmat and a record on and have fun with music.




<


Made in Europe
Need help? Feel free to contact us. We have experienced partners all over the world. Find your dealer here: www.project-audio.com/en/find-a-dealer/
Pages referenced in this manual — manufacturer, support and downloads.
Owners and our team usually reply within a day — and your question helps the next person too.
Be the first to ask — other owners or our team will answer.