Instruction/ maintenance manual of the product Box Scraper FK351 Buhler
Go to page of 16
.
.
Box Scraper TABLE OF CONTENTS DESCRIPTION PAGE WARRANTY ................................................................ 1 INTRODUCTION ......................................................... 2 SAFETY ................................................
Box Scraper 1 WARRANTY POLICY Buhler Manufacturing products are warranted for a period of twelve (12) months (90 days for commercial application) from original date of purchase, by original purchaser, to be free from defects in material and workmanship under correct, normal agricultural use and proper applications.
Box Scraper 2 INTRODUCTION The Buhler Farm King Box Scraper features two ½” x 6” replaceable, back-to-back blades to make this a bi-directional scraper. The scarifier shanks are heat treated and are easily adjusted for depth. T he Box Scraper is available in 5’, 6’ & 7’ models .
Box Scraper 3 SAFETY Remember, YOU are the key to safety. Good safety practices not only protect you, but also the people around you. Make these pr actices a working part of your safety program.
Box Scraper 4 GENERAL SAFETY INSTRUCTIO NS Have a first-aid kit available fo r use and know how to use it. Have a fire extinguisher available, stored in a highly visible location, and know how to use it.
Box Scraper 5 SERVICE AND MAINTE NANCE SAFETY Stop engine, set brake, remove ignition key, and wait for all moving parts to stop before servicing, adjusting, re pairing, or unplugging. Support the equipment with blocks or safety stands before working beneath it.
Box Scraper 6 ASSEMBLY 1. Bolt the hitch (#2) and hitch braces (#3) to the frame ( #1) using hardware supplied. 2. Use the position or draft mode on the three-point control to make a cut at constant depth. Use float when you want the scraper to follow the contour of the ground.
Box Scraper 7 MAINTENANCE 1. Raise the Box Scraper off the ground. 2. Securely block up the frame. 3. Remove blade mounting bolts. 4. If the top side of the blade has not been used, revers e and reattach. If it has been used, replace blade. 5. Install mounting bolts and re-tighten.
Box Scraper 8.
Box Scraper 9 WHEN ORDERING PARTS Always give your dealer the Model, Color and Serial Number of your machine to assist him in ordering and obtaining the correct parts. Use the expl oded view and tabular listing of the area of interest to exactly identify the required part.
Box Scraper 10 SHIPPING KIT AND BUNDLE NUMBERS The following is a list of Kit Numbers fo r this product and the Bundle Numbers, Descriptions, and Quantities for each Kit.
NOTES.
.
DIVISION LOCATIONS U.S. WAREHOUSES Farm King Division 301 Mountain Street S. Morden, MB R6M 1X7 Ph.: (204) 822-4467 Fax: (204) 822-6348 Allied/Inland Division 1260 Clarence Avenue Winnipeg, MB R3T 1T2 Ph.: (204) 284-6100 Fax: (204) 477-2325 B.I.I. Division 1330 43 rd Street N.
An important point after buying a device Buhler Box Scraper FK351 (or even before the purchase) is to read its user manual. We should do this for several simple reasons:
If you have not bought Buhler Box Scraper FK351 yet, this is a good time to familiarize yourself with the basic data on the product. First of all view first pages of the manual, you can find above. You should find there the most important technical data Buhler Box Scraper FK351 - thus you can check whether the hardware meets your expectations. When delving into next pages of the user manual, Buhler Box Scraper FK351 you will learn all the available features of the product, as well as information on its operation. The information that you get Buhler Box Scraper FK351 will certainly help you make a decision on the purchase.
If you already are a holder of Buhler Box Scraper FK351, but have not read the manual yet, you should do it for the reasons described above. You will learn then if you properly used the available features, and whether you have not made any mistakes, which can shorten the lifetime Buhler Box Scraper FK351.
However, one of the most important roles played by the user manual is to help in solving problems with Buhler Box Scraper FK351. Almost always you will find there Troubleshooting, which are the most frequently occurring failures and malfunctions of the device Buhler Box Scraper FK351 along with tips on how to solve them. Even if you fail to solve the problem, the manual will show you a further procedure – contact to the customer service center or the nearest service center
