Instruction/ maintenance manual of the product Allied FK330 Buhler
Go to page of 18
96” Allied Snowblower TABLE OF CONTENTS DESCRIPTION PAGE Warranty ...................................................................... 1 Safety Instructions & Safety Sign Locati ons ................ 2 Operating In structi ons .................
96” Allied Snowblower WARRANTY REGISTRATION AND POLICY Buhler Manufacturing products are warranted for a period of twelve (12) months from original date of purchase, by original purchas er, to be free from defec ts in material and workmanship under correct, normal agric ultural use and proper applications.
96” Allied Snowblower SNOWBLOWER This manual is for 96" Allied Snowblower with a quick coupling hitch. With this hitch, the blower can be mounted on a tractor with either a quick hitch or the standard three-point hitch. All 96" Allied snowbl owers have a sealed oil bath gearbox.
96” Allied Snowblower OPERATING INSTRUCTIONS 1. Do not operate the blower in the fully raised position. The three-point hitch on some tractors rises high enough to cause the PTO shaft to bind. This can cause damage to the PTO shaft and/or to t he hitch and pins.
96” Allied Snowblower OPERATING INSTRUCTIONS – cont’d 11. Shear Sprocket: The shear sprocket ( #24) should be checked at the beginning of every season to make sure it will spin fr eely. With time this sprocket could corrode and seize which will not allow the shear bolt to break if something jams in the snow blower auger.
96” Allied Snowblower ASSEMBLY INSTRUCTIONS 1. Fasten the two quick hitch arms ( #57 & #58, left and right) to the main body. Use eight 5/8” x 1 ¼” hex bolts, lock washers and hex nuts. Note: Lift arms for quick coupling hitch are 30 ¾” long versus 35” for the standard three point hitch.
96” Allied Snowblower ASSEMBLY INSTRUCTIONS – cont’d. 7. Mounting blower on tractor: a) The pins supplied with the snow blower are for a category 2 quick hitch. The quick coupling hitch has two holes both at the top of the hitch and at each lift arm.
96” Allied Snowblower ASSEMBLY INSTRUCTIONS – cont’d. 8. PTO SHIELD All snowblowers are supplied with a PTO shield (#61). To install, remove the two rear bolts at the top of the gearbox (#38). Bolt the PTO shield to the gearbox by the hinges using thes e same bolts.
96” Allied Snowblower 96” SNOWBLOWER W/QUICK HITCH - 8 -.
96” Allied Snowblower - 9 -.
96” Allied Snowblower WHEN ORDERING PARTS Always give your dealer the Model and Serial Nu mber of your machine to assist him in ordering and obtaining the correct parts. Us e the exploded view and tabular listing of the area of interest to exac tly identify the required part.
96” Allied Snowblower 34 965919A Drive Shaft Guard 35 965964 1/4'' Cable x 70'' Long 36 965923 Swivel Arm 37 967140 1'' x 10ga Narrow Rim Washer (pl) 38 BU50505 Gearbox.
96” Allied Snowblower 96” ALLIED SNOWBLOWER PTO (Standard and Optional Long) - 12 -.
96” Allied Snowblower 96" ALLIED SNOWBLOWER PTO (Optional Long) Item # Part # Description F0586 Shaft Complete 907996 Tractor Half of PTO (Shear) 907997 Implement Half of PTO (Clamp Yoke) 1 907989 Shear Assembly 2 936199 Safety Slide Lock Repair Kit (Collar, Spring, Ret.
96” Allied Snowblower -14- 96" ALLIED SNOWBLOWER PTO (Standard) Item # Part # Description F0585 Shaft Complete 907987 Tractor Half of PTO (Shear) 907988 Implement Half of PTO (Clamp Yoke) 1 907989 Shear Assembly 2 936199 Safety Slide Lock Repair Kit (Collar, Spring, Ret.
96” Allied Snowblower 96” ALLIED SNOWBLOWER GEARBOX 960 FK, 74", 85", & 96" ALLIED SN OWBLOWER GEARBOX PARTS LIST Item # Part # Description BU50505 Gearbox Complete 1 BU50310 Ge.
96” Allied Snowblower 3.5 X 8 CYLINDER ASSEMBLY Item # Part # Description 24803 Cyl Complete 1 24804 Tube Weldt 2 113934 Piston Rod 1.5 Dia 3 X2098 Seal Kit 1.75 X 5 CYLINDER ASSEMBLY Item # Part # Description 24930 Cyl Complete 1 115367 Tube Weldt 2 112104 Shaft Weldt 1.
96” Allied Snowblower 96” ALLIED SNOWBLOWER BUNDLES QUANTITY BUNDLE NO. DESCRIPTION 96” Allied Snowblower w/Hydraulic C hute Control & 3-Blade Fan - YC9620Q 1 FX9214 Body Assembly 1 FX9204 Q.
An important point after buying a device Buhler Allied FK330 (or even before the purchase) is to read its user manual. We should do this for several simple reasons:
If you have not bought Buhler Allied FK330 yet, this is a good time to familiarize yourself with the basic data on the product. First of all view first pages of the manual, you can find above. You should find there the most important technical data Buhler Allied FK330 - thus you can check whether the hardware meets your expectations. When delving into next pages of the user manual, Buhler Allied FK330 you will learn all the available features of the product, as well as information on its operation. The information that you get Buhler Allied FK330 will certainly help you make a decision on the purchase.
If you already are a holder of Buhler Allied FK330, but have not read the manual yet, you should do it for the reasons described above. You will learn then if you properly used the available features, and whether you have not made any mistakes, which can shorten the lifetime Buhler Allied FK330.
However, one of the most important roles played by the user manual is to help in solving problems with Buhler Allied FK330. Almost always you will find there Troubleshooting, which are the most frequently occurring failures and malfunctions of the device Buhler Allied FK330 along with tips on how to solve them. Even if you fail to solve the problem, the manual will show you a further procedure – contact to the customer service center or the nearest service center
