Instruction/ maintenance manual of the product USBAV-700 ADS Technologies
Go to page of 14
© 2001 ADS Technologies. All Rights Reserved First Edition: Revision 1.0 October, 2001 Microsoft, Windows, and Windows 98 are registered trademarks of Microsoft Corporation. IBM is a registered trademark of the International Business Machines, Inc. ADS is a registered trademark of ADS Technologies Inc.
2 USB Instant DVD Installation Guide Getting Started 1. Check USB Instant DVD Contents Hardware: (A) USB Instant DVD device (B) 5 VDC Power supply (C) 6 ft. USB Cable (D) 6 ft. A/V In cable (RCA video and Audio to RCA video and 3.5 mm stereo) (E) 6 ft.
In this section we will connect all audio and video cables that you will use to capture audio and video and then send audio and video back to a TV or VCR for viewing or recording. 2. Wire It Up! 1. Connect your video source (VHS, DVD, Laser Disc Player, TV.
4 2. Wire It Up! (cont’d) 2. Connect your USB Instant DVD Audio to the Sound Card on your PC. This will send Audio from your USB Instant DVD to your PC. 4. Connect your USB Instant DVD to your TV or VCR. This will send captured or edited video back to your TV or VCR for viewing or recording.
5 Connect the Right and Left RCA jacks of the (F) 9 ft. Audio out to TV/VCR cable to the Audio Inputs on your TV or VCR. Connect the 3.5mm stereo jack to the Line Out or Speaker jack on your sound card. I f you do not have a “Line Out” jack you can connect this cable to your “Speaker Jack”.
6 3. Plug It In Plug it In! In this section you will Connect USB Instant DVD to your PC and Install Software Drivers. Follow these step by step instructions to connect your USB Instant DVD and install device drivers and software applications: 1.) INSERT CD - Insert the USB Instant DVD CD into your PC’s CD-ROM drive.
7 4. Install Device Drivers and Application Software Install Device Drivers Windows will detect the device and install the device drivers. Follow the “New Hardware Wizard” to install the drivers. The device drivers are located at the root of the USB Instant DVD CD.
8 5. Verify Hardware Installation Check Device Manager to verify that the USB Instant DVD hardware is recognized by Windows and is properly installed. Win98, Win98SE, WinME : 1.) Click Start, Settings, Control Panel. 2.) In Control Panel, click System.
9 5. Windows Audio Mixer Settings Windows Audio Mixer Settings USB Instant DVD uses your computer sound card to record and playback the audio portion of your video recordings. You need to set up your audio mixers to properly capture the audio. Volume/ Play Control Mixer 1.
10 By now you should have completed the following: 1.) Made all of the Audio and Video connections between Instant DVD and your Audio/Video equipment. 2.) Connected Instant DVD to the Power Supply and USB Port on your PC. 3.) Installed USB drivers and verified the device is properly installed 4.
11 USB Instant DVD Wizard Step One : Choose worldwide video standard based on country For more information on these standards, click on “Learn more about worldwide video standards” Step Two : Select Video Inputs &Outputs Choose RCA or S-Video based on your video source uvs5_1edited.
12 USB Instant DVD Wizard (cont’d) Step Three : Create file name and select file location Step Four : Choose video format and click Finish. For more information on these MPEG, click on “Learn more about video formats” uvs5_1edited.
13 Service and Warranty: Service: If you require assistance with the installation, operation, or application of your ADS Technologies, Inc. product there are several options available to you as described in the technical support section of this manual.
14 Warranty : This ADS Technologies, Inc. product comes with a One (1) year hardware warranty. ADS Technologies, Inc. (ADS) warrants this product against defects in material and workmanship for a period of One (1) year from the date of original purchase from ADS or an authorized ADS dealer.
An important point after buying a device ADS Technologies USBAV-700 (or even before the purchase) is to read its user manual. We should do this for several simple reasons:
If you have not bought ADS Technologies USBAV-700 yet, this is a good time to familiarize yourself with the basic data on the product. First of all view first pages of the manual, you can find above. You should find there the most important technical data ADS Technologies USBAV-700 - thus you can check whether the hardware meets your expectations. When delving into next pages of the user manual, ADS Technologies USBAV-700 you will learn all the available features of the product, as well as information on its operation. The information that you get ADS Technologies USBAV-700 will certainly help you make a decision on the purchase.
If you already are a holder of ADS Technologies USBAV-700, but have not read the manual yet, you should do it for the reasons described above. You will learn then if you properly used the available features, and whether you have not made any mistakes, which can shorten the lifetime ADS Technologies USBAV-700.
However, one of the most important roles played by the user manual is to help in solving problems with ADS Technologies USBAV-700. Almost always you will find there Troubleshooting, which are the most frequently occurring failures and malfunctions of the device ADS Technologies USBAV-700 along with tips on how to solve them. Even if you fail to solve the problem, the manual will show you a further procedure – contact to the customer service center or the nearest service center
