Instruction/ maintenance manual of the product PURON 583B Bryant
Go to page of 28
SINGLE-PACKAGE GAS HEATING/ELECTRIC COOLING UNITS Model 583B Sizes 024-060 2 to 5 Nominal Tons Low NOx Models Available Form No. PDS 583B.24.3 Single-Package Rooftop Products with Energy-Saving Features and Puron® refrigerant.
— 2 — Corporate thermostats include the Time Guard ® II anti-short cycle protection circuitry. If a non-corporate thermostat without anti-short cycle protection is used the Time Guard II field in- stalled anti-short cycle kit is recommended. Refrigerant system is designed to provide dependability.
— 3 — ARI* CAPACITIES COOLING CAPACITIES AND EFFICIENCIES UNIT 583B NOMINAL T ONS ST ANDARD CFM NET COOLING CAP A CITIES (Btuh) SEER† SOUND RA TINGS** (dB) 024040 024060 2 800 24,000 12.0 72 030040 036060 2-1/2 1000 29,000 12.0 72 036060 036090 3 1200 35,000 12.
— 4 — ARI* CAPACITIES (cont) HEATING CAPACITIES AND EFFICIENCIES LEGEND AFUE — Annual Fuel Utilization Efficiency NOTE: Before purchasing this appliance, read important energy cost and efficiency information available from your retailer.
— 5 — PHYSICAL DATA UNIT SIZE 583B 024040 024060 030040 030060 036060 036090 042060 042090 NOMINAL CAP A CITY (ton) 2 2 2-1/2 2-1/2 3 3 3-1/2 3-1/2 OPERA TING WEIGHT (lb) 290 290 313 313 321 321 382 382 COMPRESSORS Scroll Quantity 1 REFRIGERANT (R-410A) Quantity (lb) 5.
— 6 — PHYSICAL DATA (cont) UNIT SIZE 583B 048090 048115 048130 060090 060115 060130 NOMINAL CAP A CITY (ton) 444555 OPERA TING WEIGHT (lb) 421 421 421 468 468 468 COMPRESSORS Scroll Quantity 1 REFRIGERANT (R-410A) Quantity (lb) 9.5 9.5 9.5 10.0 10.
— 7 — OPTIONS AND ACCESSORIES Factory-installed options Coil options include copper/copper and vinyl-coated construc- tion for refrigerant coils. Units are shipped standard with copper tube/aluminum fin construction. See model number nomencla- ture for coil options.
— 8 — A99315 Filter Rack A99316 DAMPER BLADE MANUAL OUTSIDE AIR HOOD REPLACEMENT P ANEL Manual Outside Air Damper A99317 Economizer A99314.
— 9 — BASE UNIT DIMENSIONS — 583B024-036 REQ ’ D CLEARANCES FOR OPERA TION AND SERVICING. in. (mm) Evaporator coil access side .................. 3 6 (914) P ower entry side (except for NEC requirements) ......... 3 6 (914) Unit top ..........
— 10 — REQUIRED CLEARANCE FOR OPERA TION AND SERVICING in. [mm] EV AP . COIL ACCESS SIDE..............................................................36.00 [914.0] POWER ENTR Y SIDE .................................................................
— 11 — ACCESSORY DIMENSIONS Gasket around outer edge Insulated deck pan Gasket around duct S/A R/A HV AC unit base *Gasketing outer flange Flashing field supplied Roofing material field supplied C.
— 12 — SELECTION PROCEDURE (WITH E XAMPLE) I DETERMINE COOLING AND HEATING REQUIREMENTS AT DESIGN CONDITIONS: Given: Required Cooling Capacity (TC).....................35,000 Btuh Sensible Heat Capacity (SHC).........................25,000 Btuh Required Heating Capacity.
— 13 — PERFORMANCE DATA STANDARD INDOOR PSC MOTOR COOLING CAPACITIES 583B024 COOLING PERFORMANCE T ABLE T emp (F) Outdoor Air Entering Condenser Evaporator Air — CFM / BF 600 / 0.08 800 / 0.10 1000 / 0.12 Evaporator Air — Ewb (F) 62 67 72 62 67 72 62 67 72 75 TC SHC kW 23.
— 14 — PERFORMANCE DATA (cont) STANDARD INDOOR PSC MOTOR COOLING CAPACITIES (cont) See Legend and Notes on page 15. 583B036 COOLING PERFORMANCE T ABLE T emp (F) Outdoor Air Entering Condenser Evaporator Air — CFM/BF 900/0.09 1200/0.13 1500/0.18 Evaporator Air — Ewb (F) 62 67 72 62 67 72 62 67 72 75 TC SHC kW 35.
— 15 — PERFORMANCE DATA (cont) STANDARD INDOOR PSC MOTOR COOLING CAPACITIES (cont) 583B048 COOLING PERFORMANCE T ABLE T emp (F) Outdoor Air Entering Condenser Evaporator Air — CFM/BF 1200 / 0.06 1600 / 0.08 2000 / 0.11 Evaporator Air — Ewb (F) 62 67 72 62 67 72 62 67 72 75 TC SHC kW 47.
— 16 — 583B STANDARD UNIT — WET COIL AIR FLOW DELIVERY NOTE: *Air delivery values are without air filter. Deduct field-supplied air filter pressure drop to obtain external static pressure available for ducting. Deduct 10% for 208 volts. Dashes indicate portions of table that are not recommended.
— 17 — 583B COOLING DRY COIL ICM AIRFLOW — SMALL CABINET 583B COOLING DRY COIL ICM AIRFLOW — LARGE CABINET 583B HEATING ICM AIRFLOW — SMALL CABINET 583B HEATING ICM AIRFLOW — LARGE CABINET UNIT SIZE CFM ADJUST PIN SELECT LO PIN NOM PIN HI PIN EXTERNAL STATIC PRESSURE RANGE 0.
— 18 — 583B ICM AIR FLOW VS. TEMPERATURE RISE CHART PERFORMANCE DATA (CONT) ECONOMIZER/1-IN. FIL TER PRESSURE DROP (in. wg) UNIT COOLING SIZE RA TED GAS INPUT RA TE (X 1000) AIRFLO W SETTING EAST SELECT ™ (SCFM) CALCULA TED TEMPERA TURE RISE MIN.
— 19 — TYPICAL PIPING AND WIRING INDOOR THERMOST A T DISCONNECT PER NEC* FROM POWER SOURCE RETURN AIR T OP CO VER FROM GAS LINE *NEC - NA TIONAL ELECTRICAL CODE ROOF RETURN-AIR FLEXIBLE DUCT CEILI.
— 20 — APPLICATION DATA Condensate trap — A 2-in. condensate tr ap must be fi eld supplied. Ductwork — Secure down fl ow discharge ductwork to roof curb .
— 21 — 4 5 2=5v 4 5 7=7v 4 5 5=2v LEGEND FLA — Full Load Amps LRA — Lock ed Rotor Amps MCA — Minimum Circuit Amps MOCP — Maximum Ov ercurrent Protection RLA — Rated Load Amps NO TES: 1.
— 22 — TYPICAL WIRING SCHEMATIC — 208/230-1-60 SHOWN C99076.
— 23 — TYPICAL WIRING SCHEMATIC — 208/230-3-60 SHOWN C99077.
— 24 — TYPICAL WIRING SCHEMATIC — 460-3-60 SHOWN C99078.
— 25 — ICM FIOP WIRING SCHEMATIC — 208/230-1-60 YEL BLK YEL BLU YEL YEL BLK BRN I BLK.
— 26 — OPERATING SEQUENCE Heating — On a call for heating, terminal “ W ” of the thermostat is energized, starting the induced-draft motor. When the hall- effect sensor on the induced-draft motor senses that it has reached the required speed, the burner sequence begins.
— 27 — PACKAGED GAS HEATING/ELECTRIC COOLING UNITS CONSTANT VOLUME APPLICATION HVAC GUIDE SPECIFICATIONS SIZE RANGE: 2 TO 5 TONS, NOMINAL COOLING 40,000 TO 130,000 BTUH, NOMINAL HEATING INPUT BRYANT MODEL NUMBER: 583B PART 1 — GENERAL 1.
— 28 — SPECIFICATIONS SUBJECT TO CHANGE WITHOUT NOTICE UNIT MUST BE INSTALLED IN ACCORDANCE WITH INSTALLATION INSTRUCTIONS Cancels: PDS 583B.24.2 Form PDS 583B.24.3 © 2001 Bryant Heating & Cooling Systems, 7310 W. Morris St., Indpls., IN 46231 PRINTED IN U.
An important point after buying a device Bryant PURON 583B (or even before the purchase) is to read its user manual. We should do this for several simple reasons:
If you have not bought Bryant PURON 583B yet, this is a good time to familiarize yourself with the basic data on the product. First of all view first pages of the manual, you can find above. You should find there the most important technical data Bryant PURON 583B - thus you can check whether the hardware meets your expectations. When delving into next pages of the user manual, Bryant PURON 583B you will learn all the available features of the product, as well as information on its operation. The information that you get Bryant PURON 583B will certainly help you make a decision on the purchase.
If you already are a holder of Bryant PURON 583B, but have not read the manual yet, you should do it for the reasons described above. You will learn then if you properly used the available features, and whether you have not made any mistakes, which can shorten the lifetime Bryant PURON 583B.
However, one of the most important roles played by the user manual is to help in solving problems with Bryant PURON 583B. Almost always you will find there Troubleshooting, which are the most frequently occurring failures and malfunctions of the device Bryant PURON 583B along with tips on how to solve them. Even if you fail to solve the problem, the manual will show you a further procedure – contact to the customer service center or the nearest service center
