Instruction/ maintenance manual of the product IntraOral Camera AdvanceCAM ADS Technologies
Go to page of 9
AdvanceCAM IntraOral Camera Operation And Installation Manual.
Advance Video Remote Control: Full / Quad Button : Choose to capture image in full screen or capture 4 images (quad). F/M : Press button t o capture image o n monitor Delete Button : Press shade d quad (1,2,3 or 4) to “delete” image from that specific quad.
Docking Station AIC815 Full / Quad Button : Push button to capture im age(s) in full screen or 4 images (quad). Choice Button : Press the choice button to highlight image 1 2 3 or 4 when in quad mode. The number will tu rn green. This function only wo rk s in qua d m ode.
Advance Cam Press “Freeze button” to freeze image. Pre ss “Freeze button” again to copy image into memory. There is also an additional button on the wand that will a llow you to change from “full” to “quad”. Press this button once and it will put you in “quad” mode.
AIC 850 AIC 900 AIC810 AIC815 Connect Camera wand cable to wireless transmitter if you desire wireless operation. Connect camera wand cable to docking station if you desire corded use. Turn power to transmitter on and off. Light will emit from end of camera when p ower is on.
1. Prior to using the TPC-WIC 850, AIC900 ch arge the Wireless Video Module TX until the power supplies LED turns back to green. It will be red while the unit is charging. After the charging period is over, it is recommende d th at the power charger be rem oved fr om the transmitter.
AIC810 4. Plug adv20 “switching power adapter” into Docking Station ADV-2 0 /AIC815 “DC 5VIN” port. Pl ug power supply into wall outlet. AIC810 5. Plug RCA jack or S-Video into Docking Station ADV- 20 “AV Out” or “ YC Out” port. C onnect other en d of video cable into Vide o Input port o n monitorin g device (pc or T V).
Notes: Cameras that start with PA or NT, you will need to press the freeze button to activate the camera’s LED’s. This will turn the camera on. Then you will be able to see an image from the camera. Docking Station Settings: AIC800,805,810,815 • Switches 1-4 are to select the docking station’s channels.
Troubleshooting Guide The remote to my camera does not work. 1. Point the remote towards the lens of the camera, press any button an d hold on the remote. You should see light flicke ring on the moni tor. You must use t he camera to see this becau se the hum an eye cannot detect this light.
An important point after buying a device ADS Technologies IntraOral Camera AdvanceCAM (or even before the purchase) is to read its user manual. We should do this for several simple reasons:
If you have not bought ADS Technologies IntraOral Camera AdvanceCAM yet, this is a good time to familiarize yourself with the basic data on the product. First of all view first pages of the manual, you can find above. You should find there the most important technical data ADS Technologies IntraOral Camera AdvanceCAM - thus you can check whether the hardware meets your expectations. When delving into next pages of the user manual, ADS Technologies IntraOral Camera AdvanceCAM you will learn all the available features of the product, as well as information on its operation. The information that you get ADS Technologies IntraOral Camera AdvanceCAM will certainly help you make a decision on the purchase.
If you already are a holder of ADS Technologies IntraOral Camera AdvanceCAM, but have not read the manual yet, you should do it for the reasons described above. You will learn then if you properly used the available features, and whether you have not made any mistakes, which can shorten the lifetime ADS Technologies IntraOral Camera AdvanceCAM.
However, one of the most important roles played by the user manual is to help in solving problems with ADS Technologies IntraOral Camera AdvanceCAM. Almost always you will find there Troubleshooting, which are the most frequently occurring failures and malfunctions of the device ADS Technologies IntraOral Camera AdvanceCAM along with tips on how to solve them. Even if you fail to solve the problem, the manual will show you a further procedure – contact to the customer service center or the nearest service center
