Instruction/ maintenance manual of the product HT80IC ADS Technologies
Go to page of 8
HT60ic HT80ic owner's manual analog and digital systems.
2 table of contents introduction . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .2 cautions . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
3 tweeter protection A solid state device reduces power to the tweeter when the loudspeaker is operated at unsafe power levels. It resets automatically when power is r educed to a safe level. Note: the tweeter protector provides a significant level of protection.
general mounting suggestions Avoid placing the speaker within two feet (0.6 meters) of a corner . The acoustic reflections from surfaces near the speakers can detract from the sound quality . Do not place the speaker behind heavy fabrics; if you cannot see through a fabric, you cannot hear thr ough it.
5 installation pr eparation Use the supplied template to outline the mounting hole. Cut the mounting hole and remove any debris from the ar ea. T ake the necessary steps to keep debris from falling into the back of the speaker . Route the wires fr om the amplifier to the speaker installation location.
6 specifications HT60ic HT80ic frequency r esponse (Hz) 65-20 kHz 58-20 kHz impedance 4 ohm 4 ohm sensitivity 1W/1M (dB) 88 dB 88 dB max bezel diameter 9-1/4" (23.5 cm) 10-7/8" (27.6 cm) mounting hole 7-11/16" (19.5 cm) 9-7/16" (24.
7 warranty information LIMITED TWO YEAR CONSUMER W ARRANTY Directed Electr onics, Inc. promises to the original purchaser , to replace this pr oduct should it prove to be defective in workmanship or m.
Directed Electronics, Inc. All rights reserved G39630/35 07-04.
An important point after buying a device ADS Technologies HT80IC (or even before the purchase) is to read its user manual. We should do this for several simple reasons:
If you have not bought ADS Technologies HT80IC yet, this is a good time to familiarize yourself with the basic data on the product. First of all view first pages of the manual, you can find above. You should find there the most important technical data ADS Technologies HT80IC - thus you can check whether the hardware meets your expectations. When delving into next pages of the user manual, ADS Technologies HT80IC you will learn all the available features of the product, as well as information on its operation. The information that you get ADS Technologies HT80IC will certainly help you make a decision on the purchase.
If you already are a holder of ADS Technologies HT80IC, but have not read the manual yet, you should do it for the reasons described above. You will learn then if you properly used the available features, and whether you have not made any mistakes, which can shorten the lifetime ADS Technologies HT80IC.
However, one of the most important roles played by the user manual is to help in solving problems with ADS Technologies HT80IC. Almost always you will find there Troubleshooting, which are the most frequently occurring failures and malfunctions of the device ADS Technologies HT80IC along with tips on how to solve them. Even if you fail to solve the problem, the manual will show you a further procedure – contact to the customer service center or the nearest service center
