Instruction/ maintenance manual of the product AdvanceCAM ADS Technologies
Go to page of 9
AdvanceCAM IntraOral Camera Operation And Installation Manual.
Advance Video Remote Control: Full / Quad Button : Choose to capture image in full screen or capture 4 images (quad). F/M : Press butt on to capture i mage on m onitor Delete Button : Press shaded quad (1,2,3 or 4) to “delete” image from that specific quad.
Docking Station AIC815 Full / Quad Button : Push button to capture image(s) in ful l screen or 4 im ages (quad) . Choice Button : Press the choice button to highlight image 1 2 3 or 4 when in quad mode . The number will turn green. Th is function only wo rk s in qua d mode.
Advance Cam Press “Freeze button” to free ze image. Press “Freeze button” aga in to copy imag e into memory. There is also an additional butto n on the wand tha t will allow you to change from “full” to “quad”. Press this button once and it will put you in “quad” mode.
AIC 850 AIC 900 AIC810 AIC815 Connect Camera wand cable to wireless transmitter if you desire wireless operation. Connect camera wand cable to docking station if you desire corded use. Turn power to transmitter on and off. Light will emit from end of camera when p ower is on.
1. Prior to using the TPC-WI C 850, AI C900 charge the Wireless Video Module TX until the power supplies LED turns back to green. It will be red while the unit is charging. After the charging period is over, it is recommen ded that the power charger be rem oved from the transmitter.
AIC810 4. Plug adv20 “switching power adapter” into Dock ing Station ADV -20 /AIC81 5 “DC 5VI N” port. Pl ug power supply into wall outlet. AIC810 5. Plug RCA jack or S-Video into Docking Station ADV- 20 “AV Out” or “YC Out” port. Con nect other en d of vide o cable into Vi deo Input port on m onitoring device (pc or TV).
Notes: Cameras that start with PA or NT, you will need to press the freeze button to activate the camera’s LED’s. This will turn the camera on. Then you will be able to see an image from the camera. Docking Station Settings: AIC800,805,810,815 • Switches 1-4 are to select the docking station’s channels.
Troubleshooting Gui de The remote to my camera does not work. 1. Point the remote towards the lens of the camera, press any button and hold on the remote. You sh ould see light fli ckering on t he monitor. You must use t he camera to see this becau se the human eye cannot detect this light.
An important point after buying a device ADS Technologies AdvanceCAM (or even before the purchase) is to read its user manual. We should do this for several simple reasons:
If you have not bought ADS Technologies AdvanceCAM yet, this is a good time to familiarize yourself with the basic data on the product. First of all view first pages of the manual, you can find above. You should find there the most important technical data ADS Technologies AdvanceCAM - thus you can check whether the hardware meets your expectations. When delving into next pages of the user manual, ADS Technologies AdvanceCAM you will learn all the available features of the product, as well as information on its operation. The information that you get ADS Technologies AdvanceCAM will certainly help you make a decision on the purchase.
If you already are a holder of ADS Technologies AdvanceCAM, but have not read the manual yet, you should do it for the reasons described above. You will learn then if you properly used the available features, and whether you have not made any mistakes, which can shorten the lifetime ADS Technologies AdvanceCAM.
However, one of the most important roles played by the user manual is to help in solving problems with ADS Technologies AdvanceCAM. Almost always you will find there Troubleshooting, which are the most frequently occurring failures and malfunctions of the device ADS Technologies AdvanceCAM along with tips on how to solve them. Even if you fail to solve the problem, the manual will show you a further procedure – contact to the customer service center or the nearest service center
