Instruction/ maintenance manual of the product DR-3200 Brother
Go to page of 11
BROTHER ® HL-5300 SERIES • TN650 TONER CAR TRIDGE REMANUF ACTURING INSTRUCTIONS BROTHER ® TN650 TONER CAR TRIDGE © 2010 UniNet Imaging Inc. All trademark names and artwork are property of their respective owners. Product brand names mentioned are intended to show compatibility only.
Released in April 2009, the Br other HL -5300 series printer is based on a new 32ppm, true 1200 DPI laser engine. These machines hav e a first page out in less than 8.5 seconds and come standard with 1 6 or 32Mb of memor y , depending on the machine. The HL -5300 series also hav e built-in duplexing.
BASIC BROTHER PRINT THEOR Y As with previous Br other car tridges, the wast e toner is repelled out of the drum car tridge and picked up b y the dev eloper rolle r in the toner cartridge and brought back into supply chamber . That is why there will alwa ys be a good amount of toner left in the supply chamber when the car tridge is finished.
1. V acuum the ext erior of the car tridge. Remo ve the fill plug from the t oner car tridge. Dump the remaining toner and vacuum/blow out the cartridge. Even though the gears are cov ered on these car tridges, we ha ve f ound it best to k eep one hand ov er the gear side to pr otect them.
5. The reset gear is spring-loaded and must be positioned correctly for the print er to accept a ne w car tridge. Our printer came with a TN620 starter car tridge that had a reset gear installed so all car tridges would be able to be recy cled. 6. Remo ve the black plastic spacer fr om the dev eloper roller shaf t.
8. Remo ve all the remaining gears. Do not lose the reset gear spring! 9. On the gear side of the dev eloper roller , press in on the locking tab and rotate the de veloper r oller lock up. BRO THER HL-5300 SERIES • TN650 T ONER CARTRIDGE REMANUF ACTURING INSTRUCTIONS © 2010 UniNet Imaging Inc.
1 0. Remo ve the dev eloper roller . Vacuum the doct or blade and foam f eed r oller clean. Until new blades are a vailable, we do not recommend that the doctor blade be remo ved or the dev eloper roller f elt seals disturbed.
13. Install the non-gear side axle plat e. Make sure the clear plastic plug f or the optical sensor is locked in the pr oper posit ion. Clean the gears making sure that they ha ve no t oner on them. This is a good time to also check the gear shafts to make sure there is enough grease.
15. Depending on the cartridge you hav e, set the reset gears as shown: For the TN620 . For the TN650 . BRO THER HL-5300 SERIES • TN650 T ONER CARTRIDGE REMANUF ACTURING INSTRUCTIONS © 2010 UniNet Imaging Inc. All trademark names and artwork are property of their respective owners.
1 6. Install the gear cov er plate and two scre ws: For the TN620 . For the TN650 . 1 7 . On the non-gear side, install the outer axle plate co ver and screw . 18. Fill the car tridge with black toner f or Bro ther 5300 series. BRO THER HL-5300 SERIES • TN650 T ONER CARTRIDGE REMANUF ACTURING INSTRUCTIONS © 2010 UniNet Imaging Inc.
19. R eplace the fill plug. Wipe the car tridge down to remo ve an y remaining toner dust. 20. Install the dev eloper roller co ver . TEST P AGES 1. Press the “GO” Button 1x with the fr ont cov er closed and the "READ Y" light on. 2. A test sam ple page will print 3.
An important point after buying a device Brother DR-3200 (or even before the purchase) is to read its user manual. We should do this for several simple reasons:
If you have not bought Brother DR-3200 yet, this is a good time to familiarize yourself with the basic data on the product. First of all view first pages of the manual, you can find above. You should find there the most important technical data Brother DR-3200 - thus you can check whether the hardware meets your expectations. When delving into next pages of the user manual, Brother DR-3200 you will learn all the available features of the product, as well as information on its operation. The information that you get Brother DR-3200 will certainly help you make a decision on the purchase.
If you already are a holder of Brother DR-3200, but have not read the manual yet, you should do it for the reasons described above. You will learn then if you properly used the available features, and whether you have not made any mistakes, which can shorten the lifetime Brother DR-3200.
However, one of the most important roles played by the user manual is to help in solving problems with Brother DR-3200. Almost always you will find there Troubleshooting, which are the most frequently occurring failures and malfunctions of the device Brother DR-3200 along with tips on how to solve them. Even if you fail to solve the problem, the manual will show you a further procedure – contact to the customer service center or the nearest service center
