EN
Pieps logo
Official user manual

Pieps Micro BT Sensor Button Race

24 pages·512 KB·Fitness & Sports·PDF·ENDEFRITNLJA
Pieps Micro BT Sensor Button Race
Table of Contents 73 sections 04 21 Firmware v3.0 · ENGLISH · 1. INTRODUCTION · 1.1 MARKINGS · … ShowHide
Page 1 of the Pieps Micro BT Sensor Button Race user manual — 04 21 Firmware v3.0
Page 1 · click to enlarge
Page 1
Pieps Micro BT Sensor Button Race — 04 21 Firmware v3.0 diagram (page 1)
Fig. 1 · 04 21 Firmware v3.0

04 21 Firmware v3.0

ENGLISH

Page 2 of the Pieps Micro BT Sensor Button Race user manual — 04 21 Firmware v3.0
Page 2 · click to enlarge
Page 2
Page 2 of the Pieps Micro BT Sensor Button Race user manual — 04 21 Firmware v3.0
Page 3 of the Pieps Micro BT Sensor Button Race user manual — 1. INTRODUCTION
Page 3 · click to enlarge
Page 3

1. INTRODUCTION

Thank you for purchasing a PIEPS beacon! Register your PIEPS beacon in the PIEPS APP (iOS, Android) or at my.pieps.com and get:

- A warranty extension free of charge - Important information about software updates Your PIEPS beacon includes all tried and tested PIEPS features:

  • 3 antenna technology
  • Big, circular receiving range for a quick and stable signal detection
  • Perfect signal processing, even in difficult situations (multiple burials)
  • Mark function
  • Comprehensive self-check
  • Easy to use group check
  • PIEPS interference protection
  • Auto search-to-send
  • iPROBE support
  • Device management via PIEPS APP

An avalanche beacon does not protect against avalanches! Detailed knowledge of avalanche prevention is as indispensable as regularly practicing victim searches in an emergency. The following procedures and tips relate only to special usage in conjunction with the PIEPS beacon. The basic line of action in an emergency – as explained in specialist publications and material from avalanche courses – must be followed.

With the PIEPS beacon you have a product that is state of the art in terms of safety and user-friendliness. Despite this, the PIEPS beacon can pose risks if used inappropriately or incorrectly. We refer to possible hazards in chapter 2 and with safety notes placed throughout the operating manual. This operating manual is intended to ensure the safe use of the PIEPS beacon. The safety instructions in this document must be followed at all times. Before you use the PIEPS beacon, you must have read and understand this operating manual.

Pieps GmbH is not liable for technical or printing errors in this operating manual, neither is any liability accepted for damage caused directly or indirectly by the delivery, performance or use of this operating manual.

Copyright © Pieps GmbH, 04/2021 This translation of the original manual is protected by copyright. All rights, especially the rights of reproduction, distribution and translation, are reserved. No part of this document may be reproduced or stored, processed, duplicated or distributed using electronic systems in any form (photocopy, microfilm or other method) without the written consent of Pieps GmbH. Violations may incur criminal penalties.

Page 4 of the Pieps Micro BT Sensor Button Race user manual — PRO BT Example of the model name. 1.2 LIABILITY
Page 4 · click to enlarge
Page 4

1.1 MARKINGS

In accordance with applicable regulations, the following marks may be found on the PIEPS beacon or/and on the packaging:

CE mark of conformity: indicating the fulfillment of the following standards: EMV 2014/30/EU, RED 2014/53/EU, RoHS 2011/65/EU.

Dustbin symbol: advising users to dispose of waste electrical and electronic equipment separately from unsorted municipal waste. FCC ID FCC ID: indicating the compliance with Part 15 of the FCC Rules. IC ID IC ID: indicating the compliance with Industry Canada’s licence-exempt RSS standard(s).

Bluetooth® logo: The Bluetooth® word mark and logos are registered trademarks owned by the Bluetooth SIG, Inc. and any use of such marks by Pieps GmbH is under license. Other trademarks and trade names are those of their respective owners. SN 12 digit serial number: identifying the device and is used for device registration.

Recycling symbol.

Battery symbol: indicating battery type and correct position.

Instruction pictogram: advising users to read the instructions and warnings.

PIEPS brand name.

PIEPS logo.

PRO BT Example of the model name. 1.2 LIABILITY

The information contained in this operating manual describes but does not guarantee the features of the product. No liability is accepted for damage caused by:

  • improper use,
  • failure to follow the operating manual,
  • unauthorized modifications of the PIEPS beacon,
  • improper work on and with the PIEPS beacon,
  • continuing to use the PIEPS beacon despite evidence of wear and tear,
  • unauthorized, improperly carried out repairs,
  • emergencies, external influences or force majeure.
Page 5 of the Pieps Micro BT Sensor Button Race user manual — 1.7 ESSENTIALS
Page 5 · click to enlarge
Page 5

1.3 WARRANTY CONDITIONS

The manufacturer provides a 2-year warranty covering manufacturing and material defects of the PIEPS beacon from the date of purchase. Exceptions are the battery, carrying system, hand-loop and bag as well as any damage caused by improper use or dismantling of the device by unauthorized persons. Any other warranties and liability for consequential damage are expressly excluded. For warranty claims, please take proof of purchase and a description of the fault to the point of sale. 1.4 MANUFACTURER ADDRESS & SUPPORT

Pieps GmbH, Parkring 4, 8403 Lebring, Austria For technical problems, please contact the support: support@pieps.com 1.5 INTENDED USE

The PIEPS beacon serves as an avalanche victim search device (avalanche transceiver) for the localization of buried persons and must only be used as intended. Any other use requires the written consent of Pieps GmbH. Improper use can put individuals at risk and result in the device being damaged. The PIEPS beacon is not an automatically functioning device with partly automated functionalities – for this reason, the PIEPS beacon may only be commissioned after having read and understood the documentation. Failure to use the device as intended will result in all liability and warranty claims being rejected. The PIEPS beacon is to be operated only under the conditions of use described in the documentation. 1.6 TARGET GROUP AND PREVIOUS KNOWLEDGE

An avalanche beacon should be part of the avalanche emergency equipment of everyone who ventures off from the secured piste into open, unsecured terrain (e.g. ski touring, freeriding, mountain rescue operations, etc.). Users of the PIEPS beacon must meet the following conditions:

  • Read and understand this operating manual.
  • Users with impaired vision must ensure that they can read the labelling and displays on the device as well

as the instructions in the documentation without problem.

  • If users with impaired hearing are unable to hear the acoustic signal, they must ensure that they can

correctly interpret the display indications in accordance with the instructions in the operating manual.

  • Regular training ensures safe and efficient use of the PIEPS beacon.

1.7 ESSENTIALS

The PIEPS beacon meets the current state of technology and the applicable health and safety regulations. However, incorrect operation or misuse can give rise to hazards for:

  • the life and health of the users or third parties,
  • the PIEPS beacon and property of the user,
  • the efficient use of the PIEPS beacon.
Page 6 of the Pieps Micro BT Sensor Button Race user manual — 2. SAFETY
Page 6 · click to enlarge
Page 6

1.8 TECHNICAL SPECIFICATIONS

Name PIEPS MICRO BT sensor/button/RACE Transmission frequency 457 kHz

Field strength max. 7 dBµA/m (2,23 µA/m) at a distance of 10 m

Bluetooth transmission frequency 2.402 - 2.480 GHz

Bluetooth transmission power 0 dBm Power supply 1x Alkaline (AA) LR6 1.5 V or 1x Lithium (AA) FR6 1.5V

Battery lifetime 200 h (Alkaline), 350 h (Lithium) Search strip width 50 m

Dimensions (LxWxH) 106 x 74 x 20 mm Weight 150 g (incl. battery)

Temperature range -20° C to +45° C (-4° F to +113° F) Storage temperature range -25° C to +70° C (-13° F to +158° F)

2. SAFETY

This operating manual is structured in accordance with the applicable EU regulations and contains safety instructions. Each individual is personally responsible for complying with the safety instructions. This chapter contains all safety-related information. Should anything be unclear or difficult to understand, please contact our support team. 2.1 SIGNAL WORDS USED IN THE SAFETY INSTRUCTIONS

DANGER Imminent threat to the life of individuals A safety instruction with the signal word DANGER indicates an imminent threat to the life and health of individuals! WARNING Risk of personal injury (serious injuries) and possible material damage A safety instruction with the signal word WARNING indicates a dangerous situation which could affect the health of individuals. CAUTION Risk of material damage and possible minor risk of injury A safety instruction with the signal word CAUTION indicates a possibly dangerous situation which could primarily result in material damage. NOTICE This symbol with the text NOTICE indicates supporting information. 2.2 GENERAL SAFETY RULES AND OBLIGATIONS

The following safety rules and obligations apply in general for using the PIEPS beacon:

  • The PIEPS beacon must only be used in perfect condition.
  • It is forbidden to change the PIEPS beacon without the written permission of Pieps GmbH.
  • Do not attempt to repair damage or malfunctions without authorization. Instead, contact our support, who will tell how to proceed. The PIEPS beacon must not be used until the damage/malfunction has been repaired.
  • The safety and operating instructions in the operating manual must be followed at all times.
Page 7 of the Pieps Micro BT Sensor Button Race user manual — 2.3 RESIDUAL RISKS | WARNINGS
Page 7 · click to enlarge
Page 7

2.3 RESIDUAL RISKS | WARNINGS

Even though the PIEPS beacon has been designed with maximum care and all safety-related facts have been taken into consideration, residual risks may exist and must be evaluated by means of a risk assessment. All residual risks and warnings from the risk assessment are listed in this chapter.

Only use batteries of type “Alkaline (AA) LR6 1.5 V or Lithium (AA) FR6 1.5V“! The use of Lithium batteries must be confirmed in the PIEPS APP!

Page 8 of the Pieps Micro BT Sensor Button Race user manual — 1A
Page 8 · click to enlarge
Page 8

3. PACKAGING

  • 1x PIEPS MICRO BT sensor/button/RACE
  • 1x Alkaline battery (in battery compartment)
  • 1x PIEPS MICRO BT sensor/button carrying system
  • 1x PIEPS MICRO Bag
  • 1x PIEPS hand loop
  • 1x Quick Start Guide
  • 1x PIEPS-Sticker Check that the contents are complete and undamaged after unpacking. If necessary, contact your point of sale or our support team. A correct disposal of the packaging is an environmentally friendly manner (paper to paper, plastic to plastic, etc.).

4. GENERAL DESCRIPTION

4.1 STRUCTURE

PIEPS MICRO BT sensor

PIEPS MICRO BT button

PIEPS MICRO BT RACE

Pieps Micro BT Sensor Button Race — PIEPS MICRO BT RACE diagram (page 8)
Fig. 2
Pieps Micro BT Sensor Button Race — PIEPS MICRO BT RACE diagram (page 8)
Fig. 3
Pieps Micro BT Sensor Button Race — PIEPS MICRO BT RACE diagram (page 8)
Fig. 4

1A

1A

1A

1B

1B

1B

1H

1K

1K

1D

1D

1D

1J

1E

1E

1E

1F

1F

1F

1G

1G

1G

(1A) MARK button (1H) “Release SEARCH-LOCK ” info symbol* (1B) Transmit control LED (1J) Proximity-Sensor* (1C) (1D)

(1K) “Confirm SEND-SEARCH switch with MARK button” info symbol** (1E) Battery polarity (1L) SEND/SEARCH button** (1F) Main switch ON/OFF/access to battery compartment

LCD-Display (backlight) Battery compartment

* PIEPS MICRO BT sensor only ** PIEPS MICRO BT button/RACE only (1G) Loudspeaker

Page 9 of the Pieps Micro BT Sensor Button Race user manual — 4.3.1 Sensor Information:
Page 9 · click to enlarge
Page 9
Pieps Micro BT Sensor Button Race — 2A diagram (page 9)
Fig. 5

(2A) Bluetooth active (2B) Auxiliary display (2C) Battery capacity (2D) Group check (2E) Direction indicator (2F) Distance indicator (2G) SEARCH-LOCK (search mode blocked) * (2H) Transmit indicator (2J) MARK (marking possible) (2K) Current sending antenna (2L) Number of burials (1-3) (2M) Number of burials (4 or more) (2N) Transmitter marked * PIEPS MICRO BT sensor only

2A

2B

2D

2E

2G

2F

2H

2J

2N

2K

2M

Pieps Micro BT Sensor Button Race — 2A diagram (page 9)
Fig. 6

4.2 CARRYING SYSTEM

3A

Pieps Micro BT Sensor Button Race — 3A diagram (page 9)
Fig. 7

PIEPS recommends using the included carrying system (3A). The MICRO bag (3B) is for storage use. The included hand-loop (3C) is intended for training purpose.

3B

4.3 MICRO BT SENSOR: SWITCHING ON | MODE CHANGE

4.3.1 Sensor Information:

The proximity-sensor (1J) is used for automatic switching from send to search mode. The sensor detects whether it is covered or not. This feature also works in darkness. 4.3.2 Switching on I Self-check I Send mode:

To turn on the PIEPS MICRO BT sensor, remove the beacon from the carrying system and switch it on by turning the main switch (1F) to the ON position. The switching on is confirmed with an acoustic (1x Pieps-tone) and haptic (1x Vibra) signal.

Page 10 of the Pieps Micro BT Sensor Button Race user manual — 4G
Page 10 · click to enlarge
Page 10

While switching on the beacon the following is displayed: current firmware-version is shown, the battery capacity/type, the status of the self-check (4A), the result of the self-check (4B) and the countdown for the group- check (4C). If the self-check is successful, “OK” is indicated on the display (4B). In the event of a device warning, an alert signal sounds and the display indicates “E” in combination with a warning-code (4E). After the self-check, place the PIEPS MICRO BT sensor into the carrying system. The PIEPS MICRO BT sensor emits an acoustic and tactile (Vibra) warning for 4 seconds that the device will switch over from search to send mode. The PIEPS MICRO BT sensor transmits (4F) and an LED indicator light (1B) flashes. In send-mode the transmitting symbol alternates with the AR-symbol (4F). AR stands for an active Auto-Revert Search-to-Send function. The Send-Vibra is an additional, haptic send confirmation (10x vibration).

4A

4B

4E

Pieps Micro BT Sensor Button Race — 4A diagram (page 10)
Fig. 8
Pieps Micro BT Sensor Button Race — 4A diagram (page 10)
Fig. 9
Pieps Micro BT Sensor Button Race — 4A diagram (page 10)
Fig. 10

4D

Pieps Micro BT Sensor Button Race — 4D diagram (page 10)
Fig. 11
Pieps Micro BT Sensor Button Race — 4D diagram (page 10)
Fig. 12

Firmware Version Battery capacity/type (AL=Alkaline, LI=Lithium)

Self-check OK Group check countdown

4F

Pieps Micro BT Sensor Button Race — 4F diagram (page 10)
Fig. 13
Pieps Micro BT Sensor Button Race — 4F diagram (page 10)
Fig. 14

4G

Pieps Micro BT Sensor Button Race — 4G diagram (page 10)
Fig. 15
  • The PIEPS MICRO BT sensor automatically switches to search mode when you remove it from the carrying

system. Search mode is blocked in this case (SEARCH-LOCK, 2G).

  • The PIEPS MICRO BT sensor automatically switches to search mode if you do not place it in the carrying

system after the start sequence (switch-on). Search mode is not blocked in this case.

Sensor Test warning · Self-check Error · Send mode SEARCH-LOCK

Page 11 of the Pieps Micro BT Sensor Button Race user manual — 4.4.1 Switching on I Self-check I Send mode:
Page 11 · click to enlarge
Page 11

SEARCH-LOCK To prevent accidental switching back to send mode during the search, search mode is blocked as soon as you take the PIEPS MICRO BT sensor out of its carrying system. The PIEPS MICRO BT sensor remains in search mode even if you return it to the carrying system during probing or digging. A blocked seach mode is indicated on the display with the SEARCH-LOCK symbol (4G).

Pieps Micro BT Sensor Button Race — 4.4 MICRO BT BUTTON/RACE: SWITCHING ON | MODE CHANGE diagram (page 11)
Fig. 16

If necessary, you can release the SEARCH-LOCK, by pressing the MARK button (1A) for 3 seconds and placing the PIEPS MICRO BT sensor in the carrying system or covering the sensor. The PIEPS MICRO BT sensor emits an acoustic and tactile (Vibra) warning for 4 seconds that the device will switch over from search to send mode. A tactile send confirmation is performed after the switchover (see Send-Vibra).

4.4 MICRO BT BUTTON/RACE: SWITCHING ON | MODE CHANGE

4.4.1 Switching on I Self-check I Send mode:

To turn on the PIEPS MICRO BT button/RACE, remove the beacon from the carrying system and switch it on by turning the main switch (1F) to the ON position. The switching on is confirmed with an acoustic (1x Pieps-tone)

and haptic (1x Vibra) signal.

While switching on the beacon the following is displayed: current firmware-version, the battery capacity/type, the status of the self-check (5A), the result of the self-check (5B), the countdown for the group-check (5C) and at the end the transmitting display with the active transmitting antenna (5D). If the self-check is successful, “OK” is indicated on the display (5B). In the event of a device warning, an alert signal sounds and the display indicates “E” in combination with a warning-code (5E). For error codes, see chapter 6.1. The PIEPS MICRO BT button/RACE transmits (4F) and an LED indicator light (1B) flashes. In send-mode the transmitting symbol alternates with the AR-symbol (4F). AR stands for an active Auto-Revert Search-to-Send function. The Send-Vibra is an additional, haptic send confirmation (10x vibration).

After the self-check, place the PIEPS MICRO BT button/RACE into the carrying system.

Page 12 of the Pieps Micro BT Sensor Button Race user manual — 5D
Page 12 · click to enlarge
Page 12

5A

5B

5D

5E

Pieps Micro BT Sensor Button Race — 5A diagram (page 12)
Fig. 17

Firmware Version Battery capacity/type (AL=Alkaline, LI=Lithium)

Self-check OK Group check countdown

Send mode Self-check Error

A secure switching from send mode to search mode is possible with the 2-button-activity.

Send Search Search Send Press the SEND/SEARCH button (1L) and confirm within the switching-countdown (5F) with the MARK button (1A). The PIEPS MICRO BT button is now in search mode (5G).

Press the SEND/SEARCH button (1L) and confirm within the switching-countdown (5F) with the MARK button (1A). The PIEPS MICRO BT button is now in send-mode (5D).

5F

Pieps Micro BT Sensor Button Race — 5F diagram (page 12)
Fig. 18

5G

Pieps Micro BT Sensor Button Race — 5G diagram (page 12)
Fig. 19

5D

Umschalt-Countdown · Suchmodus (ohne Signalempfang) · Sendemodus

Page 13 of the Pieps Micro BT Sensor Button Race user manual — 4.5 GROUP CHECK
Page 13 · click to enlarge
Page 13

4.5 GROUP CHECK

Despite a comprehensive self-check, a beacon check (transmit check and receive check) is obligatory prior to every tour! The PIEPS beacon provides the group check function. At the group check it is checked easy and efficient if the beacon of the partner is transmitting and if the transmitting parameters are according to the standard. In group check mode the receiving range is limited to 1 m.

Pieps Micro BT Sensor Button Race — 4.5 GROUP CHECK diagram (page 13)
Fig. 20
CE = Check Extended Checksignal, frequency, pulse, period
1. Switch on your PIEPS beacon. 2. Wait till the group check (CH) symbol is indicated on the display. 3. Press and hold the button MARK during the group check countdown (CH). The group check mode is active, as long the button MARK is pressed.
1. Switch on your PIEPS beacon. 2. Wait till the group check (CH) symbol is indicated on the display. 3. Press and hold the button MARK during the group check countdown (CH). The group check mode is active, as long the button MARK is pressed.

Device not transmitting or distance too big (> 1 m)

Device not transmitting or distance too big (> 1 m)

Distance readingdevice transmitting and frequency according to standard
Distance readingdevice transmitting and frequency according to standard

More than one signals within 1 m range => increase distance

End Release the button MARK to end the group check mode. During the 3 seconds countdown the group check mode can be activated again. The Regular group check is sufficient for checking modern, digital devices with 3 antennas. The Extended group check is recommended for checking old devices (analogue single-antenna devices).

Page 14 of the Pieps Micro BT Sensor Button Race user manual — Group check Pro-Mode
Page 14 · click to enlarge
Page 14

Group check Pro-Mode

The PIEPS beacon additionally provides a pro-mode. The pro-mode allows a transmit check as well as a receive check without exiting the group check mode. By default, it is disabled and can be enabled in the PIEPS APP device manager.

  • Tip the PIEPS beacon downwards to transmit in group check mode
  • Tip the PIEPS beacon upwards to receive in group check mode
Pieps Micro BT Sensor Button Race — Group check Pro-Mode diagram (page 14)
Fig. 21 · Group check Pro-Mode
Pieps Micro BT Sensor Button Race — Group check Pro-Mode diagram (page 14)
Fig. 22 · Group check Pro-Mode
Pieps Micro BT Sensor Button Race — Group check Pro-Mode diagram (page 14)
Fig. 23 · Group check Pro-Mode

Display in group check send mode CT = Check Transmit Standardmäßig ist der Pro-Mode deaktiviert. In der PIEPS APP kann das Feature aktiviert werden.

The full avalanche beacon check with pro-mode

Pieps Micro BT Sensor Button Race — Group check Pro-Mode diagram (page 14)
Fig. 24 · Group check Pro-Mode
Group leader => pro-mode SENDdevice transmitting? All others => search mode: devices receiving? (2) Transmit check

Group leader => pro-mode SEARCH: device receiving? All others => send mode: devices transmitting? NOTICE The receive check can be combined with a range test by choosing a large distance (50 m).

Pro-Mode SEARCH · Pro-Mode SEND · (1) Receive check

Page 15 of the Pieps Micro BT Sensor Button Race user manual — 4.6.2 PIEPS iPROBE-Support
Page 15 · click to enlarge
Page 15

4.6 HELPFUL PIEPS BACKGROUND FEATURES

Maximum background support in send mode and search mode! 4.6.1 PIEPS Interference Protection

  • PIEPS Auto-Antenna-Switch | protection in send mode

If the transmitting antenna is impacted by external interference, the other antenna would take over the

transmit function. The PIEPS beacon always transmits with the strongest possible signal!

  • PIEPS Signal Verification | protection in search mode

Only a verified 457kHz signal is indicated. The PIEPS beacon doesn´t confuse with ghost signal indication!

External interference and distance recommendations All beacons are very sensitive to electrical and magnetic sources of interference. Due to this, all manufacturers recommend keeping a minimum distance from electronic, magnetic and metallic sources of interference (mobile phone, radio, keys, magnetic closures, etc.): Minimum distance in send mode: 20 cm | Minimum distance in search mode: 50 cm

4.6.2 PIEPS iPROBE-Support

Beacons with iPROBE-support* get automatically deactivated when probing with the electronic probe PIEPS iPROBE. This prevents signal overlaps and the next-strongest signal is automatically shown on the display of the receiving beacon. Maximum support in multiple burials!

  • At beacons with software version 2.8 or lower the PIEPS iPROBE support is activated automatically.
  • At beacons with software version 3.0 or higher the PIEPS iPROBE support is disabled by default and can be enabled in the PIEPS APP device manager. * Beacons with iPROBE-Support: PRO BT/POWDER BT, PIEPS MICRO BT sensor/button/RACE, PIEPS DSP SPORT, PIEPS DSP PRO/PRO ICE, PIEPS DSP STANDARD/TOUR ≥ v5.0, PIEPS FREERIDE, BLACK DIAMOND GUIDE/RECON. 4.6.3 Secondary avalanche | Auto-Search-to-Send

The PIEPS MICRO BT sensor/button has the Auto-Revert Search-to-Send (AR) function. The device switches from search to send mode automatically if the device has recognized a burial (no motion).

The AR function is shown clearly on the display: the transmitting symbol alternates with AR.

Page 16 of the Pieps Micro BT Sensor Button Race user manual — 4.6 HELPFUL PIEPS BACKGROUND FEATURES
Page 16 · click to enlarge
Page 16

The AR-function provides the following characteristics:

  • Motion-controlled initialization
  • Short switching timeout
  • Long warning phase with alert and countdown prior to switching
  • Continued alert, also after switching

Beacon function SEARCH WARNING SEND

PIEPS MICRO BT sensor:

PIEPS MICRO BT button/RACE:

abort Turn device or press MARK button

START WARNING Setting 1 (60 s) 0:30 min Setting 2 (90 s) 1:00 min Setting 3 (120 s) 1:30 min

SWITCHING TO SEND 1:00 min 1:30 min 2:00 min

After the switching the PIEPS MICRO BT sensor transmits permanently with a warning signal till it is switched off. The PIEPS MICRO BT button/RACE can be switched into search-mode with the secured 2-button-confirmation.

Display indication Search-Display · Sound Search-sound · Manual

Page 17 of the Pieps Micro BT Sensor Button Race user manual — SIGNAL SEARCH COARSE SEARCH FINE SEARCH PINPOINTING
Page 17 · click to enlarge
Page 17

4.7 SEARCH MODE | SEARCH STRATEGY

4.7.1 In case of emergency

A buried person has the greatest chance of being rescued by an efficient companion rescue. In the event of an accident, the following applies: KEEP CALM, OBSERVE, ALERT, ACT WITH COORDINATION! (1) Keep calm & get an overview

  • Are there any other risks?
  • How many victims?
  • Determine the primary search area!

(2) Make a brief emergency call

  • EU 112, AT 140, CH 1414, IT 118, FR 15, NA 911
  • Signal search (eyes + ears, beacon)
  • Coarse search (starting with initial signal)
  • Fine search (closer than 5 m on the surface)
  • Pinpointing (systematic probing)

(4) Systematic digging (5) First Aid (6) Rescue

Pieps Micro BT Sensor Button Race — 4.7.1 In case of emergency diagram (page 17)
Fig. 25 · 4.7.1 In case of emergency

SIGNAL SEARCH COARSE SEARCH FINE SEARCH PINPOINTING

Result Accuracy Search Speed

Show 4 more labels / short text on this page
(3) Burial search · Point of impact · Point of disappearance · Primary Search area
Page 18 of the Pieps Micro BT Sensor Button Race user manual — 4.7.2 Signal search
Page 18 · click to enlarge
Page 18

4.7.2 Signal search

Start searching in the primary search area for the initial signal detection as well as for visual/acoustic signals. The PIEPS beacon has a circular receiving range that allows a correct indication of direction and distance from the point of initial signal detection – a specific method such as turning/rotating is not necessary. All signals of the burials that are within the maximum receiving range are received simultaneously.

Walk the search strip width in the search area quickly. The recommended search strip width for the PIEPS beacon is 50 m. The display shows “no signal”.

Pieps Micro BT Sensor Button Race — 4.7.2 Signal search diagram (page 18)
Fig. 26 · 4.7.2 Signal search
Pieps Micro BT Sensor Button Race — 4.7.2 Signal search diagram (page 18)
Fig. 27 · 4.7.2 Signal search
Pieps Micro BT Sensor Button Race — 4.7.2 Signal search diagram (page 18)
Fig. 28 · 4.7.2 Signal search

One rescuer with skis for signal search

More rescuers for signal search d = search strip width

One rescuer by foot for signal search

one two three four or more

Vibra on initial signal detection The PIEPS beacon provides additional haptic support by vibration on initial signal detection. This lets rescuers focus on the visual surface search during the signal search.

Page 19 of the Pieps Micro BT Sensor Button Race user manual — 4.7.4 Fine search
Page 19 · click to enlarge
Page 19

4.7.3 Coarse search

Follow the directional arrow quickly and check for a decreasing distance reading. Change the search direction by 180° in case of an increasing distance reading.

Pieps Micro BT Sensor Button Race — 4.7.3 Coarse search diagram (page 19)
Fig. 29 · 4.7.3 Coarse search
Pieps Micro BT Sensor Button Race — 4.7.3 Coarse search diagram (page 19)
Fig. 30 · 4.7.3 Coarse search
Pieps Micro BT Sensor Button Race — 4.7.3 Coarse search diagram (page 19)
Fig. 31 · 4.7.3 Coarse search
Pieps Micro BT Sensor Button Race — 4.7.3 Coarse search diagram (page 19)
Fig. 32 · 4.7.3 Coarse search

Turn right NOTICE Work calmly and with concentration in search mode. Avoid hasty movements!

4.7.4 Fine search

From a distance of 5 m, the search speed should be notably reduced (50 cm/s). At the same time, start working close to the surface of the snow. To prevent confusion during the fine search, the direction indication disappears below a distance of 2 m. Reduce the search speed again and find, by cross-like movements, the position of the lowest distance reading. A dynamic acoustic signal output supports the fine search: the closer the faster.

Pieps Micro BT Sensor Button Race — 4.7.4 Fine search diagram (page 19)
Fig. 33 · 4.7.4 Fine search
Pieps Micro BT Sensor Button Race — 4.7.4 Fine search diagram (page 19)
Fig. 34 · 4.7.4 Fine search

Do an accurate direction adjustment before the direction arrow disappears! You are then moving to the transmitting beacon in best coupling position and save time during the cross-like movements.

Move your beacon at a slow, steady speed of about 10 cm/s, keep it leveled close to the surface and do not rotate your device. Search along the Y axis, determine the lowest distance value, then follow along the X axis. Always move past the point of the lowest distance to verify the distance tendency. Mark the point of the lowest distance reading and start pinpointing.

Turn left · Move straight ahead

Page 20 of the Pieps Micro BT Sensor Button Race user manual — 4.7.5 Pinpointing
Page 20 · click to enlarge
Page 20
Pieps Micro BT Sensor Button Race — 4.7.5 Pinpointing diagram (page 20)
Fig. 35 · 4.7.5 Pinpointing

4.7.5 Pinpointing

Begin at the point of the lowest distance indicated. Always probe perpendicular to the surface. Use your lower hand as a “probe guide” to ensure the probe follows a steady path. Follow a proven system until you have a hit. Communicate a hit clearly to companions. Leave the probe stuck for shoveling guidance.

A multiple burial is indicated clearly on the display by the number of small human figures (2G, 2H). Marking is possible from a distance reading of 5 m and is indicated by the MARK symbol (2E). Press the button MARK (1A) briefly to “hide” the localized transmitter. A successful flagging is confirmed by a frame around the human figure (2J). The display then indicates the direction/distance to the next strongest signal inside the receiving range. If there are no further signals within the receiving range the display indicates “no signal”.

Pieps Micro BT Sensor Button Race — 4.7.5 Pinpointing diagram (page 20)
Fig. 36 · 4.7.5 Pinpointing

Continuous wave indication | old-device-indication Old analog transceivers are transmitting a continuous wave in addition to the pulse signal. To keep an impact at a minimum, it is recommended to step a few meters away after marking such a transmitter.

Pieps Micro BT Sensor Button Race — 4.7.5 Pinpointing diagram (page 20)
Fig. 37 · 4.7.5 Pinpointing
Pieps Micro BT Sensor Button Race — 4.7.5 Pinpointing diagram (page 20)
Fig. 38 · 4.7.5 Pinpointing

Signal without continuous wave Signal with continuous wave

The PIEPS beacon identifies a continuous wave and supports visually by flashing human figures.

prior to marking · after marking

Page 21 of the Pieps Micro BT Sensor Button Race user manual — 5. DEVICE MANAGEMENT WITH THE PIEPS APP
Page 21 · click to enlarge
Page 21

5. DEVICE MANAGEMENT WITH THE PIEPS APP

Bluetooth and the PIEPS APP allow a straightforward device management (e.g. software update, device configuration) and additionally provide a handy training mode. Get the PIEPS APP (Android Play Store, iOS App Store), connect your PIEPS beacon and take advantage of all features!

To activate Bluetooth (2A), press the button MARK (1A) while switching on the beacon. As soon as the Bluetooth symbol is shown on the display, the MARK button can be released. The Bluetooth-mode is confirmed with an acoustic (2x Pieps-tone) and haptic (2x Vibra) signal. To enable Bluetooth, press the button MARK (1A) while switching on the beacon.

Bluetooth enabled Connection to mobile device established

Pieps Micro BT Sensor Button Race — 5. DEVICE MANAGEMENT WITH THE PIEPS APP diagram (page 21)
Fig. 39

Admin Lock ✓ ✓ Battery type (Alkaline/Lithium) ✓ ✓ Auto-Search-to-Send Timeout (60 s/90 s/120 s) ✓ ✓ Group check ON/OFF ✓ ✓ Group check Pro-Mode ON/OFF ✓ ✓ Send-Vibra ON/OFF ✓ ✓ Group check extended ON/OFF ✓ ✓ iPROBE support ON/OFF ✓ ✓ Reset to factory defaults ✓ ✓ Further useful features of the PIEPS APP:

  • Software Updates
  • Warranty extension for registered users
  • Device check
  • Training mode
  • Practical scenarios
Page 22 of the Pieps Micro BT Sensor Button Race user manual — E2 E3 E4
Page 22 · click to enlarge
Page 22

6. TROUBLESHOOTING, MAINTENANCE, STORAGE, DISPOSAL

6.1 TROUBLESHOOTING

Error Description Measure No indication on the display Check the device for physical damage. Check the battery capacity, type and polarity (+,-). Replace the batteries. Take the device to your retailer. E0 High current This error disappears after the self-check.

Take the device to your retailer.

E1 System configuration This error remains on the display. The device is not serviceable.

Take the device to your retailer.

E2 E3 E4

Repeat the self-check in an area free from interference (outdoors) and check for electronic, magnetic and metallic sources of interference. In case of a permanent error take the device to your retailer. E5 Processor This error remains on the display. The device is not serviceable.

Transmitter or receiver or amplifier The error disappears after the self-check. The device has limited functionality in send or search mode.

Take the device to your retailer.

E6 Distance and/or direction indicator This error disappears after the self-check. The device has limited functionality regarding the distance and/or direction indication.

Take the device to your retailer.

E7 Proximity sensor The error remains in the additional display (2B). In this case, automatic SendSearch switching is not possible; the switching must be performed manually.

Repeat the self-check and ensure that the sensor area is not covered during the self-check. Manual SendSearch switching is performed by pressing the MARK button for 3 seconds. Take the device to your retailer. Automatic SendSearch switching does not take place.

Ensure that the sensor is not covered. Check the display glass and especially the sensor area for soiling or deposits (large snowflakes), clean the display glass as necessary. E8 Accelerometer This error disappears after the self-check. The device has limited functionality: Auto- Search-to-Send is not possible. Group check pro-mode is not possible.

Take the device to your retailer.

E9 Bluetooth Bluetooth activation and/or connection not possible. The avalanche beacon function is working. Is not checked during the self-check, occurs only during Bluetooth activation.

Retry to activate the Bluetooth mode. In case of a permanent error take the device to your retailer.

Page 23 of the Pieps Micro BT Sensor Button Race user manual — 6.4 STORAGE
Page 23 · click to enlarge
Page 23

6.2 BATTERY REPLACEMENT

Change the batteries as soon as the battery capacity indication (2C) shows an empty battery. Always change all three batteries at once! To do so, open the battery compartment (1D, 1F) and be sure to insert the new batteries the right way around. For battery disposal, follow the applicable regulations in your country.

Pieps Micro BT Sensor Button Race — 6.2 BATTERY REPLACEMENT diagram (page 23)
Fig. 40

PIEPS MICRO BT sensor 200 h 350 h PIEPS MICRO BT button/RACE 200 h 350 h

Pieps Micro BT Sensor Button Race — 6.2 BATTERY REPLACEMENT diagram (page 23)
Fig. 41

3/3 full 100% - 66% (h SEND) ✓ 2/3 full 66% - 33% (h SEND) ✓ 1/3 full 33% (h SEND) - 20 h SEND ✓

empty 20 h SEND (+10° C, 50° F) + 1 h SEARCH (-10° C, 14° F)

empty, blinking Final reserve, device can shut down at any time

6.3 CLEANING

Use a damp cloth without cleaning agent to clean the device.

Pieps Micro BT Sensor Button Race — 6.3 CLEANING diagram (page 23)
Fig. 42

6.4 STORAGE

Store the device in a dry room at room temperature.

Page 24 of the Pieps Micro BT Sensor Button Race user manual — 7. CONFORMITY
Page 24 · click to enlarge
Page 24

6.5 DISPOSAL

7. CONFORMITY

  • EUROPE Hereby, Pieps GmbH declares that the radio equipment type PIEPS MICRO BT sensor/button/RACE is in compliance with Directive 2014/53/EU. The full text of the EU declaration of conformity is available at the following internet address: <a href="http://www.pieps.com/conformity" rel="nofollow noopener" target="_blank">www.pieps.com/conformity</a> USA/CANADA Manufacturer: Pieps GmbH | Type/Model: MICRO BT sensor/button/RACE FCC ID: REMDSP03 | IC: 7262A-DSP03 USA: FCC Notice, Cautions and Statement This device complies with the Part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) This device may not cause harmful interference, and (2) This device must accept any interference received, including interference that may cause undesired operation. This equipment has been tested and found to comply with the limits for Class B digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residual installation. This equipment generates, uses and can radiate frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one of the following measures:
  • Reorient or relocate the receiving antenna
  • Increase the separation between the equipment and receiver
  • Connect the equipment into an outlet on a circuit different from that to which the receiver is connected
  • Consult the dealer or an experienced radio/TV technician for help To assure continued compliance, any changes or modifications not expressly approved by the party responsible for compliance could void the user’s authority to operate this equipment. This transmitter must not be co-located or operated in conjunction with any other antenna or transmitter. This equipment complies with FCC radiation exposure limits set forth for an uncontrolled environment and meets the FCC radio frequency (RF) Exposure Guidelines. This equipment has very low levels of RF energy that are deemed to comply without testing of specific absorption ratio (SAR). Canada: IC Notice This device complies with Industry Canada’s licence-exempt RSS standard(s). Operation is subject to the following two conditions: (1) this device may not cause interference; and (2) this device must accept any interference, including interference that may cause undesired operation of the device. This equipment complies with IC radiation exposure limits set forth for an uncontrolled environment and meets RSS-102 of the IC radio frequency (RF) Exposure rules. This equipment has very low levels of RF energy that are deemed to comply without testing of specific absorption ratio (SAR).
Sources

References & links

Pages referenced in this manual — manufacturer, support and downloads.

Display codes

Error codes

What the fault codes shown on the display mean and how to clear them.

CodeMeaningFix
E0High current This error disappears after the self-check. p.22
E1System configuration This error remains on the display. The device is not serviceable. p.22
E2 E3 E4Transmitter or receiver or amplifier The error disappears after the self-check. The device has limited functionality in send or search mode. p.22
E5Processor This error remains on the display. The device is not serviceable. p.22
E6Distance and/or direction indicator This error disappears after the self-check. The device has limited functionality regarding the distance and/or direction indication. p.22
E7Proximity sensor The error remains in the additional display (2B). In this case, automatic SendSearch switching is not possible; the switching must be performed manually. p.22
E8Accelerometer This error disappears after the self-check. The device has limited functionality: Auto- Search-to-Send is not possible. Group check pro-mode is not possible. p.22
E9Bluetooth Bluetooth activation and/or connection not possible. The avalanche beacon function is working. Is not checked during the self-check, occurs only during Bluetooth activation. p.22

Ask about the Pieps Micro BT Sensor Button Race

Owners and our team usually reply within a day — and your question helps the next person too.

Add your email to get notified when it’s answered — no spam, ever.

0 questions
No questions yet about the Pieps Micro BT Sensor Button Race

Be the first to ask — other owners or our team will answer.

Original document

Pieps Micro BT Sensor Button Race manual PDF

24 pages·512 KB·Fitness & Sports·PDF
Click any page above to open it here
Page 1 / …
100%
Loading pages…