Instruction/ maintenance manual of the product 580C Brother
Go to page of 188
.
Thank you for purchasing the P-touch 580C! Your new P-touch will allow you to design and print labels and stamps for any use. Your labels and stamps can contain characters of many sizes and styles as well as bar codes and graphics imported from other Windows applications.
i ABOUT THIS MANUA L ................................................................................................................ . 1 QUICK REFERENCE GUIDE BEFORE YOU START MACHINE DIAGRA M .........................................................
ii BACKSPAC E ............................................................................................................... . 63 LINE OU T ..............................................................................................................
1 Although this machine is easy to use, we suggest that you read this manual carefully before starting. This manual consists of a reference guide and three main sections: QUICK REFERENCE GUIDE This section provides a quick, simple guide to setting up and using the machine.
2.
3.
4.
.
6.
7.
8 h Use only Brother TZ tapes with this machine. Do not use tapes that do not have the TZ mark. h Five TZ tape widths are available: 1/4” (6 mm), 3/8” (9 mm), 1/2” (12 mm), 3/4” (18 mm), and 1” (24 mm). h Do not pull on the tape. This may damage the tape cassette.
9 This is a lightweight and portable machine. It can be used anywhere by installing six (6) AA alkaline batteries. When you change the batteries, always replace all six at the same time.
10 The AC adaptor (model AD-30) allows you to use this machine anywhere a standard electrical outlet is available. TO ATTACH THE AC ADAPTOR: (1) Insert the small plug on the adaptor into the jack marked DC IN 7V on the right side of the machine. (2) Insert the large plug into the nearest standard electrical outlet.
11 This machine is equipped with a jack which allows you to print stamp and labels that you create with the P-touch EDITOR software installed on your IBM or compatible PC. TO CONNECT THE COMPUTER: (1) Be sure both the P-Touch 580C and the computer are turned off.
12 A single TZ tape cassette is supplied with this unit. However, since TZ tape cas- settes and multi-color ink and tape cassettes are available for this machine in a wide variety of colors and sizes, it is possible to make distinctive color-coded and stylized labels.
13 TO INSERT MULTI-COLOR INK AND TAPE CASSETTES: (1) Press down on the cover release button and lift open the compartment cover. (2) If there is a cassette already in the compartment, remove it by pulling it straight up.
14 If too much of the tape is rewound back into the cassette:.
15 The enclosed stick enables you to remove the label backing from the tape easily. (1) Hold the tape in your left hand, with the printed surface facing up, and hold the stick in your right hand. (2) Pass the tape halfway through the long narrow ho le in the stick.
16 Occasionally, specks of dust or dirt become attached to the machine’s print head and rollers. This is particularly likely when you are using the unit out- doors or in a very dusty environment. If a section of the print head is covered with dust, a blank horizontal streak may appear through the label message.
.
18 In Learning the Ropes, you will find a series of label-making examples. As the featured label designs become increasingly more complex, you will learn how to use the more advanced features of the machine. The first exercise consists of creating a simple one-line door sign.
19 Let’s begin by turning on the power to the machine. The power button is located in the top right-hand corner of the keyboard. The text entry mode on this machine is WYSIWYG (What You See Is What You Get) mode, which allows you to see the label as it will appear after it is printed.
20 turned on for the first time have been preprogrammed into the machine and represent the most common style settings for labels. However, you can create your own formats and can even define local formats, which are special style settings for portions of text within the label.
21 Once you have created a message, you can easily edit it by correcting mistakes or simply adjusting the text or style. For detailed explanations of text editing methods, see pages 63 to 65.
22 Finally, suppose we would like to add a no smoking symbol, just one of many available on this machine, to our door sign. A detailed explanations of symbol entry can be found in the Symbols section on page 52.
23 + You can press the CANCEL key at any time to return to text entry mode from Symbol mode. Since our message is finished, we can now print it. Though several print set- tings are available, we will use the default settings preprogrammed into the machine.
24 + The label this example can be printed on 3/4” (18-mm)- or 1” (24-mm)-wide tape. Although the entered characters may not seen to align properly in the LCD display, they will line up correctly on the printed label. In this practice sessi on, we will make a multi-line equipment instruction label.
25 In our multi-line message, we will be using the RETURN key to end one line and start the next. This key operates like the Return on a typewriter by ending the current line and moving the cursor to the next line.
26 Press the FORMAT key at any time to view the current label formats. These settings can only be applied globally, i.e. to the entire message. For detailed explanations of the global format settings, see pages 93 to 103 of For Your Information.
27 Now, let’s edit the message, changing it from four to three lines and adjusting some of the text..
28 The message has been created and edited. If it were printed now, the standard default settings would be used. The text would be aligned at the left margin and would not be framed or underlined. In addition, the characters would be auto- sized and printed using font F1 (Helsinki) and a normal style.
29 Since we wish to put a frame around the entire label and center the text, we will use the FORMAT key to enter these global format settings..
30 Now, let’s take a look at how to store text files for future use and how to recall them when desired. Detailed explanations of the machine’s memory can be found in the Storing/Recalling/Deleting section on pages 105 to 108.
31 Clearing removes all text from the working area. If you have not saved the information in the machine’s memory, it will be lost. Since we have saved it, we can clear the working area without losing our work. Now, even though it is no longer displ ayed on the LCD, we can recall our copier instruction text file and print it.
32 Finally, let’s assume that we have three photocopier machines onto which we want to attach the same label. Therefore, we need to print three copies of the same text. A detailed explanation of the repeat printing function can be found in the Printing & Special printing section on pages 109 to 110.
33 If we now wished to print three copies of the label, we could simply press the RETURN key. Three framed and horizontally-centered labels with characters using font F2 (Brussels) would be printed. If the cut pause setting is turned off, the three copies would be printed continu- ously.
34 + The label in this example can be printed on 3/4” (18-mm)- or 1” (24-mm)- wide tape. Although the entered characters may not seem to align properly in the LCD display, they will line up correctly on the printed label. In this quick pract ice session, we will make a multi-line address label with local formatting.
.
36 Using the local format settings, we can now highlight a certain portion of our text by putting it in italics and underlining it. A detailed explanation of local formatting can be found on pages 79 to 92 and in the Local Formatting section on pages 75 to 76.
37 Now, let’s assume we wish to print one copy of this label to attach to a package..
38 + The label in this example can be printed on 3/4” (18-mm)- or 1” (24-mm)- wide tape. Although the entered characters may not seem to align properly in the LCD display, they will line up correctly on the printed label. In this final examp le, we will make a storage shelf label.
39 In this practice session, we will use local formatting and the multi-block applications as well as more specialized features, such as bar coding and numbering. Now, we will enter the storage shelf label text. We now want to change from a one-lin e to a four-line block.
40.
41 Now, we must enter the bar code information, the last portion of our message. Though many options exist for bar codes, let’s assume you wish to use CODE 39 protocol with an undetermined (free) number of digits. A detailed explanation of bar coding can be found on pages 113 to 115.
42.
43 Next, we will practice using the numbering function. This feature is particularly useful for serial numbers and other codes which require sequential numbering. In this example, let’s assume that we would like to increase the “1” in our parts code while the bar code information remains the same.
44 With the numbering feature, the numbers or letters included in the field will automatically increase when each labels is printed. A detailed explanation of this function can be found in the Sequential Numbering section on pages 58 to 59. Congratu lations! This completes the fourth and final practice session in Learning the Ropes.
.
46 In For Your Information, you will find detailed explanations of all the machine’s features. Each topic is given its own page, making this reference section easy to use. Operational examples of most features can also be found in the Learning the Ropes practice sessions.
47 This For your Information reference guide gives detailed explanations of all of this machine’s features. The following list shows which topics are covered and on which page an explanation of their operation can be found.
48 The power button is located in the top right-hand corner of the machine’s key- board. When the power is turned on, the previous session’s information is dis- played. The machine will automatically turn off if no key is pressed within 5 minutes.
49 This machine has two different types of cursors. The first, which resembles a bracket ([) in text entry mode or an underline in Auto Format or Bar Code mode, makes your current position in the text. Its operation is nearly identical to that of cursors on electronic typewriter or word processors.
50 Most characters can be entered simply by pressing their keys. However, to enter uppercase letters, accented characters and some common symbols, three special keys are necessary.
51 While the SHIFT , CAPS , and ALT keys allow you to select various characters and symbols, the CODE key allows you to choose various functions. Functions written in green can be selected by pressing the CODE key.
52 This machine has many special marks and symbols that can be entered into your text. When entered, they act like normal characters and can be both edited and deleted. Though several symbols can be found on the machine’s key tops, 126 addi - tional marks are available in Symbol mode.
53.
54 In alphabets other then the English alphabet, composite characters, which consist of a letter and a diacritical mark, are often used. This machine can also display and print there characters. The diacritical makes available ate ¨ , ´ , ` , ˆ , ˜ and ¸ .
55 The RETURN key is located on the right side of the keyboard. It is the largest, and one of the most often used keys. The RETURN key has three basic functions: TO END A LINE: Line the RETURN key on a typewriter or word processor, this machine’s RETURN key lets you end one line of the text and begin another.
56 TO ENTER AND CHOOSE ITEMS: The RETURN key can also be used to enter and choose items. For example, in Symbol mode, a large group of symbols are displayed. After you have chosen the symbol that you want to appear in your message, it will be highlighted, sig- nifying that it is the “active” symbol.
57 Any time the number of lines in a section of the label changes, a new block must be created. Creating a new block is different from local formatting, which change the type style within that line or those groups of lines. Compare these two labels: This is simply a single-block, single-line label This is a multi-block label.
58 This machine’s numbering feature allows you to designate a group of numbers and letters or a bar code as a “numbering” field and print a set number of label in which the numbering field automatically increases by 1 after a label is printed. For exam ple, a numbering field of 124 becomes 125.
59 • Letters and numbers automatically increase in the following manner: 0 è è 1 è è … 9 è è 0 è è … A è è B è è … Z è è A è è … a è è b è è … z è è a è è … • S.
60 The CANCEL key is located in the bottom row of the keyboard. It has two basic functions. TO LEAVE AN OPERATION MODE WITHOUT TAKING ANY ACTION: In general, the CANCEL key returns you to the previous screen or activity. For example, if you enter an operation mode but decide you want to return to text entry or editing, you can press the CANCEL key.
61 TO ANSWER “NO”: Prompt questions sometimes appear on the LCD display, especially when the function that you wish to perform will delete or affect files. In these cases, pressing the CANCEL key is like answering negatively. To answer “yes”, press the RETURN key.
62 After you have created a message, moving the cursor allows you to view or edit different parts of the text. In general, pressing this key moves the cursor one space or char- acter to the left. If the cursor is positioned at the beginning of a line when this key is pressed, the cursor moves to the end of the previous line.
63 The BACKSPACE key allows you to remove unwanted characters from your message. It differs from the 3 key, which simply moves the cursor without changing the message.
64 The LINE OUT key allows you to remove unwanted lines of text from your.
65 The CLEAR key allows you to remove all text and symbols from the display and return the text formats to their default settings. In other words, the current text files is completely emptied. You can then begin entering an entirely new text message. TO CLEAR A TEXT FILE: (1) Hold down the CODE key and press the CLEAR key.
66 Zoom mode allows you to see how a label will appear when it is printed by zooming out from the text, or to see parts of the message in detail by zooming in. The cursor keys can be used to move the cursor so different parts of the message can be seen.
67 This mode briefly displays the length of the label in either inches or centimeters depending on the UNIT setting. For more information on changing the units that are displayed, see Display Unit on page 100. TO ENTER LABEL LENGTH MODE: Hold down the CODE key and press the LABEL LENGTH key.
68 This mode is used to adjust the contrast of the LCD display. Contrast mode can be entered from text entry mode or Auto format mode. TO CHANGE THE CONTRAST: (1) Hold down the CODE key and press the CONTRAST key. (2) Press the 4 and 3 keys to adjust the contrast.
69 The AUTO FORMATS key is located in the lower left-hand corner of the key- board. This mode allows you to enter text quickly into layout templates so that labels can be created easily using the preset formats. TO PRINT A LABEL USING AUTO FORMAT MODE: (1) Press the AUTO FORMATS key.
70 The following chart lists the entries for the label templates, allowing you to easily select the appropriate preset layout. Label templates Entries A VCR VHS (3/4” (18 mm)) • SYMBOL? „ DURATION? ‚ TITLE? … REC. MODE? ƒ SUB-TITLE? † DATE? B VCR 8mm-1 (3/8” (9 mm)) • SYMBOL? „ DATE? ‚ TITLE? … REC.
71 Label templates Entries I NAME PLATE (3/4” (18 mm)), (1” (24 mm)) • NAME? ‚ COMPANY? J ADDRESS (3/4” (18 mm)), (1” (24 mm)) • NAME? ƒ ADDRESS2? ‚ ADDRESS1? „ ADD.
72.
73.
74.
75 The local format settings, shown in the table at the left, determine how the text is printed. After the text is entered, use the AREA and cursor keys to select the characters to be emphasized, then change the format using the local format keys ( FONT, SIZE, etc.
76.
77 The global format settings, shown in the table at the left, determine how the label is printed by establishing the orientation and alignment of the entire text message. Press FORMAT to enter the Format mode and change there formats at any time before, during or after you enter your test.
78.
79 Eight different typeface, or fonts, are available on this machine. The fonts are: F1 (Helsinki) TITLE F2 (Calgary) F2 (Brussels) TITLE F3 (Florida) F3 (Bermuda) TITLE F4 (Istanbul) TITLE F1 (San Diego) TITLE F5 (US) The default se tting is font F1.
80.
81 There are two character size settings: size and width. Usually, you will want to use the largest characters possible for the given tape and message. With the size set to AUTO, the machine compares your inputted message with the tape width and automatically uses the largest characters possible.
82 TO APPLY A SIZE/WIDTH TO THE SELECTED AREA: (1) Press the AREA key , then use the cursor keys to select the text to which you want to apply a new character size or width. (2) Press the SIZE key until the text is displayed in the character size you wish to use and press the WIDTH key until the text is displayed in the desired width.
83 Six single styles, which can all be combined with the italic style, are available. The styles are: The default setting is the normal style. (No indicators appear in the display.) + Characters printed using the smaller sizes may be difficult to read if certain style settings (e.
84.
85.
86 Selected characters in your message can be highlighted by framing them with a box or a rounded box, underlining them, crossing them out, or putting them in front of a shading pattern. The types of highlights are: The default setting is no underl ine, frame or shading.
87 With the multi-color printing function, you can create colorful labels using diffe- rent ink colors. This function is useful when part of your message must be more noticeable or when color-coded labels are needed.
88 (4) Use the color keys to highlight the string of characters which you wish to print using the second color. (5) Press the COLOR key located below the LCD display, until COLOR2 is dis- played and the C2 indicator comes on, then press the RETURN key.
89.
90.
91.
92.
93 Unique labels can be created by flaming your entire message using one of the many flames available. The types of frames are: + This framing setting can only be applied to the entire label.
94 This machine can be set to leave equal margins of between 1/6” (4 mm) and 1” (24 mm) on the left and right sides of your label. The tape feed settings are: FULL (1” (24 mm)) NONE (1/6” (4 m.
95 Characters in your message can be printed in a vertical orientation. + The vertical printing setting cannot be turned on if a TITLE font is used. Vertical printing can only be applied to the entire label. It cannot be applied to just part of the text.
96 Your message can be printed as if it is seen in a mirror. When these labels ( printed on clear tape) are affixed to glass, such as showroom windows, they can be correctly read from the opposite side. + Use clear tape when using the mirror printing setting to make a label.
97 Characters in the blocks of your message can be horizontally aligned in any one of four ways: LEFT CENTER RIGHT JUSTIFY + The horizontal alignment setting can only be applied to the entire label.
98 The blocks of your message can be vertically aligned in three ways: BOTTOM CENTER TOP + The vertical alignment setting can only be applied to the entire label. It cannot be applied to just part of the text. TO SELECT A VERTICAL ALIGNMENT (1) Press the FORMAT key.
99 The label length can be set using two different methods. With the size set to AUTO, the machine compares your inputted message with the tape size and automatically adjusts the label length to fit your message. Sometimes, however, you will want to assign a label length regardless of the message’s size.
100 The measurements on the display are shown in either inches (inch) or centime- ters (cm). + This setting is applied to all the measurements displayed. It is not avail- able in local formatting. TO SELECT THE UNITS OF THE MEASUREMENTS: (1) P ress the FORMAT key.
101 The frame or shading in your label can be assigned one of the three ink colors used during multi-color printing. COLOR1 COLOR2 COLOR3 + Before printing the label using the multi-color printing function, be sure that there is enough tape in the tape cassette, otherwise the label may not be printed properly.
102.
103 When printing multi-colored labels with character styles such as outline, solid or shadow, the part of the character that is left blank can be filled in using an ink color that is different from the one assigned to the character.
104.
105 The machine’s memory can be used to save and recall your most frequently used text messages. These messages remain in the memory, even of you clear the working area by holding down the CODE key and pressing the CLEAR key. When stored, each file is given a number to make recall easier.
106 + If there is no text in the working area, the file is now recalled. If there is some text in the working area, you will now be asked whether you want to join or overwrite the text with the recalled file. To replace the working area text with the recalled file.
107.
108 TO DELETE A FILE FROM THE MEMORY: (1) Hold down the CODE key and press the M.DEL key. (2) Press the 5 and 6 keys until the file you want to delete is displayed. + Hold down the CODE key and press the SPACE key to select all the files in the memory.
109 The PRINT key lets you print your text on the installed tape. The SPECIAL PRINT key allows you to set the number of copies of the label that will be printed, set whether the machine will pause between copies so that the tape can be cut, and turn the split printing function on and off.
110 by 1. However, if either of these keys are held down, the setting will continue changing in step of 5 until the key is released. + The default setting of the highlighted parameter can be selected .
111 This mode allows you to quickly and easily make pre-inked stamps for any need. After printing the stamp, affix the cut tape to a stamp holder for immediate and frequent use. Since the stamp holder is reusable, just make a new stamp tape and replace the one in the holder.
112.
113 The bar coding function, which enables bar codes to be printed as part of labels, is one of this machine’s most advanced features. + This section will explain how to enter a bar code into your text message. It is not intended as a comprehensive introduction to the concept of bar coding.
114 TO ENTER A BAR CODE INTO YOUR MESSAGE: (1) Hold down the CODE key and press the BARCODE key. If the cursor is located in a bar code that has already been entered, the current bar code settings will be displayed. (2) Enter the bar code data. If you wish to edit an existing bar code, enter the new data.
115 VALUE CHARACTER VALUE CHARACTER VALUE CHARACTER 68 EOT 86 SYN 102 FNC1 69 ENQ 87 ETB 70 ACK 88 CAN The following symbols can only be entered when using protocols CODE 39 or CODEBAR. SYMBOL CHARACTER 1 + 2 $ (9) When you have finished, pres s the RETURN key.
116.
117.
118 ERROR MESSAGE CAUSE REMEDY 4 DIGIT MIN. • A minimum of four digits must be entered in a bar code. This message appears when less then four digits are entered. • Enter a minimum of four digits before pressing the RETURN key. 5 BARS LIMIT! • Each label can contain no more then five bar codes.
119 ERROR MESSAGE CAUSE REMEDY BATTERIES WEAK • This message appears when the installed alkaline batteries become weak. • Replace the batteries or use the AC adaptor. BUFFER EMPTY! • This message appears if the LABEL LENGTH, AREA or SEQ. NUMBERING key is pressed when the working area buffer is empty.
120 ERROR MESSAGE CAUSE REMEDY CANCELED DATA! PRESS ANY KEY • This message appears if the CANCEL key is pressed while data is being transmitted from the computer to this unit in Inter- face mode. • Press any key other then the CODE, SHIFT, ALT or CAPS keys, then try again.
121 ERROR MESSAGE CAUSE REMEDY CUT NOW • This message appears after a label has been printed with the Cut pause mode on or before multi-color printing if the end of the tape is incorrectly positioned. • Press the tape cutter lever to cut the tape.
122 ERROR MESSAGE CAUSE REMEDY INSTALL COLOR TAPE! • This message appears if a multi-color cassette is not installed while assigning the color settings or during multi- color printing. • Install a multi-color printing ink ribbon and tape cassette.
123 ERROR MASSAGE CAUSE REMEDY LENGTH LIMIT! • The length of one label message is limited to one meter. This message appears if a chara- cter, symbol, diacritical mark, bar code, space, return or new block is entered, causing the text to exceed the one meter limit.
124 ERROR MESSAGE CAUSE REMEDY NUMBERING BUFFER FULL • This message appears if the RETURN key is pressed in Seq. numbering mode when the working area buffer is alre- ady full. • Press the CANCEL key and delete some of the text befo- re entering Seq.
125 PROBLEM REMEDY 1. The display stays blank after you have turned on the machine or abnormal cha- racters are displayed. • Check that the AC adaptor is attached properly. • If you are using alkaline batteries, check that they are properly inserted.
126 HARDWARE Input device: KEYBOARD - 63 keys LCD 112 x 32 dots 19 indicators Print tape Pressure-sensitive, adhesive-based 5 widths available: 1/4” (6 mm) 3/8” (9 mm) 1/2“ (12 mm) 3/4” (18 mm.
127 The P-touch 580C features the following: • WYSIWYG display • Multi-color printing • Stamp creating • Auto format • Multi-line printing (up to 5 lines) • Multi-block printing (up to 5 b.
128 A AC adaptor ...................................... 8, 10, 48 Accented characters .................................. 54 Accessories ............................................. 132 Alignment Horizontal ............................................
129 Vertical printing ..................................... 95 Width .................................................... 81 Deleting Stored labels ....................................... 108 Symbols ............................................... 64 Text .
130 Bar codes ..................................... 58, 115 Symbols ............................................... 58 O On/Off button ............................................. 19 Outline character style ............................... 83 Overwriting with recalled text .
131 Units ....................................................... 100 Uppercase letters ...................................... 20 V Vertical alignment ...................................... 98 Vertical printing ........................................
132 Obtain tape cassettes and AC adaptors from your nearest authorized dealer Brother cannot be held responsible for trouble caused by use of unauthorized supplies. Use only Brother TZ tapes with this machine. Do not use tape that do not have the TZ mark.
133 Stock No. Description QTY/ PACKAGE PRICE 3/8” (9 mm) laminated tapes TZ-121 Black characters on clear adhesive 1 $14.95 TZ-221 Black characters on white adhesive 1 $16.95 TZ-325 White characters on black adhesive 1 $18.98 TZ-421 Black characters on red adhesive 1 $16.
SUPPLIES ORDER FORM Dear Customer: Please send this order, along with proper payment, to the address below, OR, Visa, MasterCard or Discover holders, call toll free, 1-800-284-4357, or fax your completed order form to 1-800-947-1445 Stock No.
SUPPLIES ORDER FORM Dear Customer: Please send this order, along with proper payment, to the address below, OR, Visa, MasterCard or Discover holders, call toll free, 1-800-284-4357, or fax your completed order form to 1-800-947-1445 Stock No.
GUÍA DEL USUARIO.
¡ Muchas gracias por la adquisición del P-Touch 580C! Su nuevo P-Touch le permitirá diseñar e imprimir etiquetas para cuaquier aplicación . Como es extremadamente versátil, usted podrá crear caracters de muchos tamaños y estilos.
1 PRECAUCIONES GENERALE S ..................................................................................... 2 FUENTE DE ALIMENTACIÓN/ADAPTADOR DE CA (OPCIONAL ) ............................... 3 CONEXION CON UN ORDENADO R ........................
2 • Utilice solamente cintas TZ Brother con esta máquina. No use cintas que no posean la marca TZ. • Exiten cinco anchuras de cintas TZ disponibles: 1/4” (6 mm), 3/8” (9 mm), 1/ 2” (12 mm), 3/4” (18 mm), y 1” (24 mm). • No tire de la cita.
3 Ésta es una máquina ligera y portátil . Podrá utilizarse en cualquier parte insertándole seis (6) pilas alcalinas AA. Cuando cambie las pilas, reemplácelas todos simpre al mismo tiempo.
4 Esta máquina está provista de una toma que permite imprimir sellos y etiquetas que usted haya creado con le programa P-Touch EDITOR instalado en su ordenador IBM o compatible. PARA CONECTAR EL ORDENADOR: (1) Asegúrese de que el P-Touch 580C y el ordenador tengan la alimentación descon- ectada.
5 Con esta unidad se suministra un solo cassette de cinta TZ. Como las cintas para esta máquina están disponibles en una amplia variedad de colores de fondo, colores de caracteres, y tamaños de cintas, podrá hacer rápida y fácilmente los cassettes de cinta.
6 PARA INSERTAR CASSETTES DE CINTA Y DE TINTA DE COLORES MÚLTIPLES: (1) Presione hacia abajo el botón liberador de la cubierta y levante la tape del compa- rtimiento para abrirlo. (2) Si ya hay un cassette de cinta enel compartimiento, extráigalo tirando de el hacia arriba.
7 Si se rebobina demasiada cinta en el cassette: (1) Extraiga la cinta y los cassettes de cinta de la máquina y extraiga luego el casse- tte de tinta del cassette de la cinta. (2) Use el dedo para guiar la cinta en la caja del cassette. + Si queda poca cinta en el cassette, tire un poco de la cinta y póngala en la ranura con los dedos.
8 Es posible que a veces se adhieran motas de polvo y suciedad al cabezal de inpresión o a los rodillos de la máquina. Esto puede suceder especialmente cuando utilice la unidad en exteriores o en un ambiente muy polvoriento.
9 La mayoría de los caracteres podrán introducirse pulsando simplemente sus teclas . Sin embargo, para introducir mayúsculas, caracteres con acentos, y algunos de los Símbolos más comunes, son necesarias ares teclas especiales.
10 Esta máquina posee muchas y símbolos especiales que podrá introducir en su texto . Cuando los introduzca, actuarán como los caracteres normales y podrán editar y borrarse. Aunque puede encontrar varios símbolos escritos en las teclas, en el modo SYMBOL están disponibles 126 marcas adicionales.
11 La función de numeración de esta máquina le permitirá designar un grupo de números y letras o un código de barras como campo de “ numeración” e imprimir un juego de etiquetas en el que campo de numeración aumentará automáticamente en 1 después de haberse impreso una etiqueta.
12 Después de haber creado un mensaje, moviendo el cursor podrá ver o editar diferentes partes del texto. En general, al pulsar esta tecla, el cursor se moverá un espacio o un carácter hacia la izquierda. Si el cursor está colocado al comienzo de una línea cuando pulse esta tecla, se moverá al final de la línea anterior.
13 RETROCESO La tecla BACKSPACE le permitirá eliminar caracteres innecesarios de su mensaje . Difiere de la tecla 3 , que simplemente mueve el cursor sin cambiar el mensaje . Sin embargo, la tecla BACKSPACE eliminará el carácter anterior al cursor.
14 El modo ZOOM le permitirá ver cómo aparecerá una etiqueta cuando se imprima alejándolo del texto, o ver con detalle partes del mansaje acercándolas. Usted podrá utilizar las teclas del cursor para mover éste ha fin de poder ver dife- rentes partes del mensaje.
15 La tecla AUTO FORMATS se encuentra en la esquina inferior izquierda del teclado . Este modo le permitirá introducir rápidamente texto en plantillas de composición a fin de poder imprimir fácilmente etiquetas utilizando los formatos preajustados.
16 Esta máquina dispone de ocho tipos de caracteres , o juegos tipográficos . Los juegos tipográficos son: El ajuste por defecto es el juego tipográfico F1. + Los juegos tipográficos TITLE solamente estarán disponibles si el mensaje consta de una sola línea o si está instalada una cinta de ½” (12 mm), ¾” (18 mm), o de 1” (24 mm).
17 Existen dos ajustes de tamaño de caracteres: tamaño y anchura. Normalmente, usted deseará utilizar caracteres lo más grandes posible para la cinta y el mensaje dados. Con el tamaño ajustado a AUTO, la máquina comparará su mensaje intro- ducido con el tamaño de la cinta y utilizará automáticamente caracteres lo más gr- andes posible.
18 Existen seis estilos únicos, que pueden combinarse todos con el estilo letra cursiva. Los estilos son: El ajuste por defecto es el estilo normal. (No aparecerá ningún indicador en el visulizador.) + Los caracteres impresos utilizando los tamaños más pequeños pueden ser difíciles de leer si apica ciertos (p.
19 Los caracteres seleccionados de su mensaje podrán resaltarse enciadrándolos con un recuadro, con un recuadro redondeado, subrayándolos, techándolos o poniéndolos delante de un patrón sombreado. Los tipos de resulte son: El ajuste por defecto es ausencia de subrayado y de encuadre .
20 Con la función de impresión en colores múltiples, podrá imprimir etiquetas usando hasta tres tintas de colores distintos. La función es útil cuando parte de su mensaje debe resaltar o cuando se requieren etiquetas de codificación por colores.
21 (5) Repita los pasos (2) y (3) para resaltar la serie de caracteres que desee imprimir usando el tercer color. (6) Presione la tecla COLOR hasta que se visualice COLOR3 y se encienda el indicador C3, y presione entonces la tecla RETURN . Estos caracteres se imprimirán usando la tinta del tercer color.
22 Usted podrá crear etiquetas exclusivas encuadrando todo su mensaje utilizando uno de los muchos encuadres disponibles. Los tipos de encuadres son: + Este ajuste de encuadre solamente podrá aplicarse a toda la etiqueta. No podrá aplicarse solamente a una parte de texto.
23 Esta máquina podrá ajustarse para que deje márgenes iguales o entre 1/6” (4 mm) y 1” (24 mm) a los lados izquierdo y derecho de su etiqueta. Los ajustes de avance de cinta son: FULL 1”(24 .
24 Los caracteres de su mensaje pueden imprimirse con orientación vertical. + La impresión vertical no podrá utilizarse cuando se esté usando un juego de caracteres TITLE. La impresión vertical solamente podrá aplicarse a toda la etiqueta. No podrá utilizarse en una parte solamente del texto.
25 Los caracteres de los bloques de su mensaje podrán alinearse horizontalmente en cualquieera de las cuatro formas siguientes: LEFT ( Izquierda) CENTER (Centro) RIGTH ( Derecha) JUSTIFY ( Justificación) + La alineación horizontal solamente podrá aplicarse a toda la etiqueta .
26 La longitud de la etiqueta podrá ajustarse utilizando dos métodos diferentes . Con le tamaño en AUTO, la máquina comparará el menaje introducido con el tamaño de la cinta y ajustará automáticamente la longitud de la etiqueta para que quepa su menaje.
27 El encuadre o sombreado de la etiqueta podrá asignarse en una de las tres tintas de colores usadas durante la impresión en colores múltiples. COLOR1 COLOR2 COLOR3 + Antes de imprimir la etiqueta, asegúrese de que haya cinta suficiente en el cassette y que se haya seleccionado el ajuste para la función C.
28 Cuando se impriman etiquetas de colores múltiples con estilos de caracteres tales como perfilado, sólido o sombreado, los resaltes de los caracteres podrán rellenarse usando una tinta de un color que sea distinto al asignado para el carácter.
29 La memoria de la máquina podrá utilizarse para almacenar e invocar los mensajes de texto más frecuentemente utilizados. Estos mensajes permanecerán en la me- moria, incluso aunque borre el área de trabajo manteniendo presionada el tecla CODE y pulsando la tecla CLEAR .
30 + Si no hay texto en el área de trabajo, el archivo se invocará. Si hay cierto texto en el parea de trabajo, la máquina le preguntará si desea enlazar o reescribir el texto con el del archivo invocado.
31 La tecla PRINT le permitirá imprimir su texto en la cinta instalada. La tecla SPECIAL PRINT le permitirá indicar el número de copias de la etiqueta que desea imprimir, de- cidir si la máquina realizará una pausa o no entre copias a fin de cortar la cinta, y act- ivar desactivar la función de impresión dividida.
32 (3) Pulse las teclas 5 y 6 hasta que se visualice el ajuste deseado. Cuando esté ajustando el parámetro COPIES y presione una vez estas teclas, el ajuste cam- biará a 1. Sin embargo, si mantiene presionada cualquiera de estas teclas, el ajuste continuará cambiando en pasos de 5 hasta que la suelte.
33 Este modo le permite hacer sellos de forma rápida y fácil para cualquier aplicación. Después de imprimir el sello, coloque la cinta cortada a un portasellos para poderlo emplear con frecuencia. Puesto que el portasello es reutilizable, podrá hacer un se- llo nuevo y cambiarlo por otro que haya en el portasellos.
34 La función de código de barras, que permite imprimir códigos de barras como parte de etiquetas, es una de las características más avanzadas de esta máquina. + En esta sección se exlica cómo introducir un código de barras en su mensaje de texto.
35 PARA INTRODUCIR UN CÓDIGO DE BARRAS EN SU MENSAJE: (1) Mantenga presionada la tecla CODE y pulse la tecla BAR CODE . Si el cursor se encuentra en un código de barras ya introducido, se visualizaràn los ajustes del código de barras actual. (2) Introduzca los datos del código de barras .
36 VALOR CARÁCTER VALOR CARÁCTER VALOR CARÁCTER 70 ACK 88 CAN Lo símbolos siguientes solamente podrán introducirse utilizando protocolos CODE 39 o CODABAR.
37 MENSAJE DE ERROR CAUSA SOLUCIÓN 4 DIGIT MIN. • En un código de barras habrá que introducir un mínimo de cuatro dígitos. Este mensaje aparecerá cuando haya intro- ducido menos de cuarto dígitos. • Introduzca un mínimo de cuatro dígitos antes de pul- sar tecla RETURN .
38 MENSAJE DE ERROR CAUSA SOLUCIÓN BATTERIES WEAK • Este mensaje aparecerá cuando las pilas alcalinas instaladas se debiliten. • Reemplace las pilas o utilice el adaptador de CA. BUFFER EMPTY! • Este mensaje aparecerá si pulsa la tecla LABEL LENGTH, AREA o SEQ.
39 MENSAJE DE ERROR CAUSA SOLUCIÓN CANCELED DATA! PRESS ANY KEY • Este mensaje aparecerá si se pre- siona la tecla CANCEL mientras se están transmitiendo datos de- sde el ordenador a esta unidad en el modo de interfaz. • Presione cualquier tecla que no se CODE, SHIFT, ALT o CAPS, y vuélvalo a intenar.
40 MENSAJE DE ERROR CAUSA SOLUCIÓN CUT NOW • Este mensaje aparecerá si des- pués de haberse impreso una eti- queta con el modo de pausa de corte o en impresión de colores múltiples si el final de la cinta está incorrectamente situado. • Presione la palanca del cor- tador de la cinta para cortar la cinta.
41 MENSAJE DE ERROR CAUSA SOLUCIÓN INSTALL COLOR TAPE! • Este mensaje aparecerá si no se ha instalado un cassette de colores múltiples de colores o durante la impresión en colores múltiples. • Instale una cinta de tinta de impresión en colores múlti- ples y un cassette de cinta.
42 MENSAJE DE ERROR CAUSA SOLUCIÓN LENGTH LIMIT! • La longitud de un mensaje de etiqueta está limitado a un metro. Este mensaje aparecerá si intro- duce un carácter, un símbolo, una merca diacrítica, un código de barras, un espacio, un retorno, o un nuevo bloque que haga que el texto sobrepase el límite de un metro.
43 MENSAJE DE ERROR CAUSA SOLUCIÓN NUMBERING BUFFER FULL • Este mensaje aparecerá si pulsa la tecla RETURN en el modo de numeración cuando la memoria intermedia del área de trabajo esté llena. • Pulse la tecla CANCEL y borre algo del texto antes de entrar en el modo de nume- ración.
44 HARDWARE Dispositivo de entrada de datos: TECLADO - 63 teclas LCD: 112 x 32 puntos 19 indicadores Cinta de impresión: Sensible a la presión con base adhesiva ( cintas TZ Solamente) 8 m de longitud .
45 Adquiera los cassettes de cinta y los adaptadores de CA a un distribuidor autorizado. Brother no asumirá ningún tipo de responsabilidad por los problemas causados por la utilización de suministros no autorizados. Utilice solamente cintas TZ Brother con esta máquina.
46 Num. de existencias Descripción Cantidad/ Paquete Precio Cintas laminadas de 1/2” (12 mm) TZ-131 Caracteres negros en cinta adhesiva trans- parente 1 $16,95 TZ-231 Caracteres negros en cinta adh.
UN342001 Printed in Japan.
An important point after buying a device Brother 580C (or even before the purchase) is to read its user manual. We should do this for several simple reasons:
If you have not bought Brother 580C yet, this is a good time to familiarize yourself with the basic data on the product. First of all view first pages of the manual, you can find above. You should find there the most important technical data Brother 580C - thus you can check whether the hardware meets your expectations. When delving into next pages of the user manual, Brother 580C you will learn all the available features of the product, as well as information on its operation. The information that you get Brother 580C will certainly help you make a decision on the purchase.
If you already are a holder of Brother 580C, but have not read the manual yet, you should do it for the reasons described above. You will learn then if you properly used the available features, and whether you have not made any mistakes, which can shorten the lifetime Brother 580C.
However, one of the most important roles played by the user manual is to help in solving problems with Brother 580C. Almost always you will find there Troubleshooting, which are the most frequently occurring failures and malfunctions of the device Brother 580C along with tips on how to solve them. Even if you fail to solve the problem, the manual will show you a further procedure – contact to the customer service center or the nearest service center
