Instruction/ maintenance manual of the product Broam Elite Range Hood Broan
Go to page of 16
MODELS RMIP33 AND RMIP45 INTENDED FOR DOMESTIC COOKING ONL Y INST ALLER: LEA VE THIS MANU AL WITH HOMEO WNER. HOMEO WNER: USE AND CARE INFORMA TION ON P A GES 12 AND 13. Broan-NuT one LLC; Har tf ord, Wisconsin www .broan.com 800-558-1711 Broan-NuT one Canada; Mississauga, Ontario www .
W ARNING W ARNING - 2 - T O REDUCE THE RISK OF FIRE, ELECTRIC SHOCK OR INJUR Y TO PERSONS, OBSER VE THE FOLLO WING: 1. Use this unit only in the manner intended by the manuf acturer . If you hav e questions, contact the manuf acturer at the address or telephone number listed in the warranty .
HL0067 - 3 - RMP Series Backsplash (Stainless Steel wall cov ering with war ming shelves . Optional) RML3336S, RML3342S , RML4548S, RML4554S or RML4560S Custom Hood Liner (optional) Model 415 7” Rd .
- 4 - HL006 8 RMP Series Backsplash (Stainless Steel wall cov ering with war ming shelves . Optional) RML3336S, RML3342S , RML4548S, RML4554S or RML4560S Custom Hood Liner (optional) Model 418 10” R.
- 5 - 1. SELECT BLOWER OPTION AND INST ALL DUCTWORK Either an interior or exterior blo wer or in-line blo wer may be used with this insert. The inser t model RMIP33 or RMIP45 must be installed with blo wer models P5, P8, HLB3, HLB6, HLB9, HLB11, 331H, 332H, 335 or 336 only .
- 6 - 3. INST ALL BACKSPLASH (OPTIONAL) It is recommended to install the backsplash bef ore the custom hood inser t. The custom hood will cover the bac ksplash top mounting screws . In order to be able to install the bac ksplash, make sure y ou hav e at least 18’ ’ clearance between bottom of custom hood and range control panel or cooktop .
- 7 - 8. CUT THE HOLE IN CUST OM HOOD BASE If it is not done yet, cut a hole in the bottom of the cabinet, using the dimensions shown beside . NO TES : 1. The notch shown in the inset must be cut only if t he RMIPWC optional remote control will be installed.
- 8 - 1 1. INST ALL THE DEVIA T OR (INTERIOR BLOWER) Install the de viator as shown. NO TE : T o prev ent the deviator from sliding out of the rough-in plate , put some tape on the de viator base after sliding it into the rough-in plate (provided with the P5 and P8 b lower) opening.
- 9 - 13. CONNECT WIRING (ALL BLOWERS) Connect cable into wiring bo x using provided wire connectors. Connect wires as f ollow: BLA CK to BLACK, WHITE to WHITE and GREEN or BARE wire under ground scre w . DO NOT FORGET TO CONNECT THE GROUND . Reinstall wiring cover .
- 10 - 16. DUCTING CONNECTION (ALL BLOWERS) A. When there is access to the top of the hood, connect ductwork and seal connections with duct tape after Step 17 Install the inser t. B. When there is no access to the top of the hood, carefully pull down the metal duct through the custom hood base hole.
- 11 - Secure the blo wer by installing 2 more no . 8 x 3/8’ ’ screws f or the P5 blo wer and 4 more no . 8 x 3/8’ ’ screws f or P8 into the locations shown in the pictures belo w (single blow er or dual blower). Reinstall impeller(s) and cover .
- 12 - Grease filters and impeller(s). The grease filters, impeller(s) and g rease rail should be cleaned frequently . Use a warm detergent solution. Grease filters and impeller(s) are dishwasher saf e. Remov e greasse filters by pushing them to wards the back of hood and rotating do wnward.
22. OPERA TION BLO WER The blo wer is operated using two (2) controls or with the RMIPWC optional w all control. Use the red, lighted on/off s witch to star t and stop the blow er . When tur ned on, the b lower will operate at the pre vious setting of the speed control.
KEY P ART MODEL NO . NUMBER DESCRIPTION 33 45 RANGEMASTER LOGO FIL TER CLIP THERMOST A T SPEED CONTROL SCREW NO . 8-32 x 1/2’ ’, QUADREX MALE CONNECT OR FEMALE CONNECT OR TERMINAL STRIP LOCK NUT NO 8-32 SOCKET LAMP SPST DOUBLE SWITCH (HAL. LIGHT) SPST LIGHTED SINGLE SWITCH (BLOWER) SPEED CONTROL BUTT ON MICROMESH FIL TERS 9.
KEY NO . P ART NUMBER DESCRIPTION QTY . - 15 - SER VICE P ARTS 1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19 20 21 22 23 SV13296 SV03500 SV12997 SV03577 SV02160 SV01869 SV01857 SV01582 SV14973 SV018.
21 22 23 2 3 20 24 25 1 19 18 17 16 15 13 6 9 10 11 12 14 4 5 KEY NO . P ART NUMBER DESCRIPTION QTY . 1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19 20 21 22 23 24 25 SV14971 SV13296 SV03500 SV14975 .
An important point after buying a device Broan Broam Elite Range Hood (or even before the purchase) is to read its user manual. We should do this for several simple reasons:
If you have not bought Broan Broam Elite Range Hood yet, this is a good time to familiarize yourself with the basic data on the product. First of all view first pages of the manual, you can find above. You should find there the most important technical data Broan Broam Elite Range Hood - thus you can check whether the hardware meets your expectations. When delving into next pages of the user manual, Broan Broam Elite Range Hood you will learn all the available features of the product, as well as information on its operation. The information that you get Broan Broam Elite Range Hood will certainly help you make a decision on the purchase.
If you already are a holder of Broan Broam Elite Range Hood, but have not read the manual yet, you should do it for the reasons described above. You will learn then if you properly used the available features, and whether you have not made any mistakes, which can shorten the lifetime Broan Broam Elite Range Hood.
However, one of the most important roles played by the user manual is to help in solving problems with Broan Broam Elite Range Hood. Almost always you will find there Troubleshooting, which are the most frequently occurring failures and malfunctions of the device Broan Broam Elite Range Hood along with tips on how to solve them. Even if you fail to solve the problem, the manual will show you a further procedure – contact to the customer service center or the nearest service center
