Instruction/ maintenance manual of the product ST4SAML-B Addonics Technologies
Go to page of 8
Addonics T E C H N O L O G I E S Storage Tower ST4IDEU2, ST4SAML, ST5X1PM, ST5XHPM, ST4US, ST4ESA, ST6ESA, ST5ESAIUS, STMPC, STBTO ST4IDEU2 - B, ST4SAML - B, ST5X1PM - B, ST5XHPM - B, ST4US - B, ST4ESA - B, ST6ESA - B, ST5ESAIUS - B, STMPC -B User’s Guide Version 1.
Model: ST4US Model: ST4IDEU2 Model: ST5X1PM.
Storage Tower Preparation Sample Inst allation on the tower using IDE hard drives • Remove the side panel screws. • Slide the side panel towards the backside then pull or lift to open.
Tower with USIB connector • Any IDE or ATAPI Storage device can be converted to USB or Firewire connection via the Addonics USIB interface board and USIB interface c able.
Tower with eSATA connector For SATA connection, hot swap feature depends on the controller. All Addonics SATA controllers support the hot swap feature. eSATA and USIB back panel Tower with Port Multiplier Hot swap feature depends on the SATA controller.
Tower with Hardware Port Multiplier Note: You need to install the SiI 4726 Manager on your system to configure RAID sets. RAID configuration is programmed by connecting the hardware port multiplier: • to one of Addonics’ SATA controllers that has SIL3124 or SIL3132 chip set.
Tower with Multilane Connector Hot swap feature depends on the SATA controller. All Addonics SAT A controllers support the hot swap feature. Check with your system supplier to confirm the existing SATA port on your system supports hot swap feature.
Technical Support If you need assistance to get your unit functioning properly, please call Addonics Technical Support. Our technical staff will be happy to assist you, but they will need your help to do so. Calling the technical support staff without all the proper information can be both time consuming and frustrating.
An important point after buying a device Addonics Technologies ST4SAML-B (or even before the purchase) is to read its user manual. We should do this for several simple reasons:
If you have not bought Addonics Technologies ST4SAML-B yet, this is a good time to familiarize yourself with the basic data on the product. First of all view first pages of the manual, you can find above. You should find there the most important technical data Addonics Technologies ST4SAML-B - thus you can check whether the hardware meets your expectations. When delving into next pages of the user manual, Addonics Technologies ST4SAML-B you will learn all the available features of the product, as well as information on its operation. The information that you get Addonics Technologies ST4SAML-B will certainly help you make a decision on the purchase.
If you already are a holder of Addonics Technologies ST4SAML-B, but have not read the manual yet, you should do it for the reasons described above. You will learn then if you properly used the available features, and whether you have not made any mistakes, which can shorten the lifetime Addonics Technologies ST4SAML-B.
However, one of the most important roles played by the user manual is to help in solving problems with Addonics Technologies ST4SAML-B. Almost always you will find there Troubleshooting, which are the most frequently occurring failures and malfunctions of the device Addonics Technologies ST4SAML-B along with tips on how to solve them. Even if you fail to solve the problem, the manual will show you a further procedure – contact to the customer service center or the nearest service center
