Instruction/ maintenance manual of the product Marathon P216800R9 Britax
Go to page of 21
Marathon User Guide P2168_R09.qxd 11/15/2004 1:30 PM Page 1.
T able of Contents Safety Information . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 2-5 Child Restraint Features . . . . . . . . . . . . . . . . . . . . . . . . . . . 6-7 V ehicle Safety Belts. . . . . . . . . . . . . . . . . . . . . .
3 2 • Use only in a rear -facing position when using restraint with an infant weighing less than 20 pounds (9 kg). The American Academy of Pediatrics recommends rear facing until at least 1 year of age and 20 pounds. • Use only with children who weigh between 5 and 65 pounds (2.
5 4 Safety Information Safety Information IMPORT ANT • V erify that the child restraint is secure and that the harness is properly adjusted around the child each time the child r estraint is used. • Adjust the harness to fit the clothes the child is wearing.
Restraint Features 7 Restraint Features 6 1 2 3 4 6 7 9 10 11 12 13 14 8 5 11 5 17 15 16 18 19 20 24 22 21 23 1 Harness Slots 2 Comfort Pads 3 Chest Clip 4 HUGS™ Shoulder Pads 5 Harness 6 Harness Ho.
V ehicle Seating Positions 9 V ehicle Safety Belts 8 NOTE: The information in this section applies only to installation with vehicle belts. IMPORT ANT : Some vehicles have no seating positions which are compatible with this child restraint, or any other child restraint.
Installation: Rear Facing 11 Installation: Rear Facing 10 Rear Facing LA TCH Installation • Figure A illustrates a typical rear facing LATCH installation. 1 V erify that your vehicle is equipped with LA TCH anchors. • If LATCH anchors are not installed, you must use standard vehicle belt installation methods.
Installation: Rear Facing 13 Installation: Rear Facing 12 Rear Facing Lap-Shoulder Belt Installation • Figure A illustrates a typical rear facing lap-shoulder belt installation. • When not in use, always store the LATCH connectors in storage pouches sewn in cover above rear facing lock-offs.
Installation: Rear Facing Rear Facing Lap Belt Installation • Figure A illustrates a typical rear facing lap belt installation. • When not in use, always store the LATCH connectors in storage pouches sewn in cover above rear facing lock-offs. 1 Place the child restraint rear facing and in full recline position on the vehicle seat.
Installation: Forward Facing 17 Installation: Forward Facing 16 Forward Facing LA TCH Installation • Figure A illustrates the forward facing LATCH harness routing. 1 V erify that your vehicle is equipped with LA TCH anchors. • If LATCH anchors are not installed, you must use standard vehicle belt installation methods.
Installation: Forward Facing 19 Installation: Forward Facing 18 4 Rotate the forward facing lock-off down to open. • Only use lock-off farthest from where the vehicle belt is buckled.
Switching the LA TCH Connectors 21 Installation: Forward Facing 20 Forward Facing Lap Belt Installation • Figure A illustrates the forward facing lap belt only vehicle belt route. • When not in use, always store the LATCH connectors in storage pouches sewn in cover above rear facing lock-offs.
V ersa-T ether ® 23 Installation in Aircraft 22 This child restraint is certified for aircraft use. Most airlines in the U.S. and Canada will allow the use of a child restraint, if it is labeled as an approved child restraint for airline use and fits properly on the plane.
V ersa-T ether ® 25 V ersa-T ether ® 24 Using the V ersa-T ether 1 Once the child restraint is in a secure, seat belted position, locate the tether on the rear of the restraint. 2 Press and hold the tether adjuster release button, then pull to fully extend tether strap into a V -shape.
Checking Buckle Position 26 W ARNING: The position of the vehicle belt buckle can affect the stability of the child restraint. In an accident, an improperly positioned buckle could become loose and the child would be unprotected.
Securing Y our Child 29 Securing Y our Child 28 Once the child restraint has been installed in the vehicle, follow these instructions to secure the child. 1 Loosen the harness by lifting the adjuster lever located in front of the restraint, then pull the shoulder straps forward ( Fig.
Adjusting Harness Height 31 Checking Harness Height 30 Harness Height Adjustment 1 Loosen the harness by lifting the harness adjuster lever while pulling the shoulder straps forward as far as possible ( Fig. A ). 2 From the rear of the child r estraint, unhook the shoulder harness from the yoke ( Fig.
Care and Maintenance 33 Care and Maintenance 32 Cover Removal 1 Loosen the harness by lifting the harness adjuster lever while pulling the shoulder straps forward as far as possible. 2 Unhook the shoulder straps from the yoke on the rear of child restraint.
Care and Maintenance 35 Care and Maintenance 34 Cleaning the Buckle If a child eats and drinks while in the restraint, the buckle may need to be periodically checked and cleaned of any accumulated debris or dried liquids. THOROUGHL Y RINSE, using warm water ( Fig.
W arranty 36 This child r estraint was manufactur ed by Britax ® . Britax Child Safety, Inc. (“Britax”) wa r rants this pr oduct to the original r etail pur chaser as follows: LIMITED ONE-YEAR W ARRANTY This pr oduct is war ranted against defective materials or workmanship for one year fr o m the date of original pur chase.
P2168_R09.qxd 11/15/2004 1:33 PM Page 40.
An important point after buying a device Britax Marathon P216800R9 (or even before the purchase) is to read its user manual. We should do this for several simple reasons:
If you have not bought Britax Marathon P216800R9 yet, this is a good time to familiarize yourself with the basic data on the product. First of all view first pages of the manual, you can find above. You should find there the most important technical data Britax Marathon P216800R9 - thus you can check whether the hardware meets your expectations. When delving into next pages of the user manual, Britax Marathon P216800R9 you will learn all the available features of the product, as well as information on its operation. The information that you get Britax Marathon P216800R9 will certainly help you make a decision on the purchase.
If you already are a holder of Britax Marathon P216800R9, but have not read the manual yet, you should do it for the reasons described above. You will learn then if you properly used the available features, and whether you have not made any mistakes, which can shorten the lifetime Britax Marathon P216800R9.
However, one of the most important roles played by the user manual is to help in solving problems with Britax Marathon P216800R9. Almost always you will find there Troubleshooting, which are the most frequently occurring failures and malfunctions of the device Britax Marathon P216800R9 along with tips on how to solve them. Even if you fail to solve the problem, the manual will show you a further procedure – contact to the customer service center or the nearest service center
