Instruction/ maintenance manual of the product 7800918-00 Briggs & Stratton
Go to page of 40
Not for Reproduction Operator’s Manual 7105921 Rev. - Rear Engine Riding Mower ! en es fr Model No. 7800918-00 7800920-00 7800921-00 7800932-00.
Not for Reproduction Thank You for purchasing this quality-built Snapper product. We’re pleased that you placed your confidence in the Snapper brand. When operated and maintained according to the instructions in this manual, your Snapper product will provide many years of dependable service.
Not for Reproduction 3 Table of Contents Operator Safety ................................................................................................ 4 Features and Controls .........................................................................
Not for Reproduction www.snapper.com 4 Operator Saf ety Operating Safety P ower equipment is only as saf e as the operator . If it is misused, or not properly maintained, it can be dangerous! Remember , you are responsible f or your saf ety and that of those around you.
Not for Reproduction 5 Operator Saf ety Slope Operation Y ou could be seriously injured or e ven killed if you use this unit on too steep an incline. Using the unit on a slope that is too steep or where you don’t hav e adequate traction can cause you to lose control or roll o ver .
Not for Reproduction www.snapper.com 6 ! WARNING: This powerful cutting machine is capable of amputating hands and feet and can throw objects that can cause injury and damage! Failure to comply with the following SAFETY instructions could result in serious injury or death to the operator or other persons.
Not for Reproduction 7 Preparation 1. Read, understand, and follow instructions and warnings in this manual and on the machine, engine and attach- ments. Know the controls and the proper use of the machine before starting. 2. Only mature, responsible persons shall operate the machine and only after proper instruction.
Not for Reproduction www.snapper.com 8 Towing 1. Tow only with a machine that has a hitch designed for towing. DO NOT attach towed equipment except at the hitch point. 2. Refer to “Towing Implements” in the Operation section regarding weight limits for towed equipment and towing on slopes.
Not for Reproduction 9 Operator Saf ety en es fr WARNING: To avoid serious injury, operate your unit up and down the face of slopes, never across the face. Do not operate on slopes greater than 10 degrees. Make turns gradually to prevent tipping or loss of control.
Not for Reproduction www.snapper.com 10 Operator Saf ety Safety and Instructional Decals All DANGER, WARNING, CAUTION and instructional messages on your rider and mower should be carefully read and obeyed. Personal bodily injury can result when these instructions are not followed.
Not for Reproduction 11 Operator Saf ety Explanation of Safety Decals Explanation of Instructional Decals DANGER Amputation and thrown objects hazard Keep hands and feet away from deck. Do not operate mower unless discharge chute or entire grass catcher is in its proper place.
Not for Reproduction www.snapper.com 12 Operator Saf ety W ARNING Do not mow in reverse unless absolutely necessary. ! ! D E F G H D. Cutting Height. Shows position of cutting height adjust lever. Refer to Operation section. E. Forward Speed. Shows forward speed operation (manual drive models).
Not for Reproduction 13 F eatures and Contr ols en es fr IMPORTANT The figures and illustrations in this manual are provided for reference only and may differ from your specific model. Contact your dealer if you have questions. Features and Controls A.
Not for Reproduction www.snapper.com 14 Before Starting Make the following checks and perform the service required before each start-up: 1. Check the tire pressure; add or release air as need- ed. Refer to “How To Check Tire Pressure” in the Maintenance section.
Not for Reproduction 15 Operation en es fr Fuel Recommendations Fuel must meet these requirements: • Clean, fresh, unleaded gasoline. • A minimum of 87 octane/87 AKI (91 RON). High altitude use, see below. • Gasoline with up to 10% ethanol (gasohol) is accept- able.
Not for Reproduction www.snapper.com 16 Operation How To Start The Engine WARNING POISONOUS GAS HAZARD. Engine exhaust contains carbon monoxide, a poisonous gas that could kill you in minutes. You CANNOT see it, smell it, or taste it. Even if you do not smell exhaust fumes, you could still be exposed to carbon monox- ide gas.
Not for Reproduction 17 en es fr Operation How To Engage The Mower Blade 1. Start the engine. 2. Move the blade control ( A , Figure 8) to the ON position. Figure 8: Engaging the blade control A How To Engage The Transmission Manual Drive Models: 1. Start the engine.
Not for Reproduction www.snapper.com 18 Operation W ARNING DO NOT leave the machine with the engine running. STOP Blade. STOP engine. Shift to neutral and engage parking brake. Remove key. ! ! How To Stop The Engine, Transmission And Mower Blade Engine 1.
Not for Reproduction 19 Operation How To Set The Parking Brake 1. Fully depress the clutch/brake pedal ( A , Figure 16). 2. Slide the parking brake ( B ) up and hold while releasing the clutch/brake pedal. The parking brake is now set. 3. To release the parking brake, fully depress the clutch/ brake pedal.
Not for Reproduction www.snapper.com 20 Operation W ARNING The mulching cover must remain on the machine at all times. Do not remove. ! ! 2. Raise the mulching cover. Replace the washer and wing nut onto the retaining bolt in the deck, tightening securely.
Not for Reproduction 21 Maintenance Maintanance Chart ENGINE First 5 Hours Change engine oil Every 8 Hours or Daily Check engine oil level Every 25 Hours or Annually * Clean engine air filter and pre-.
Not for Reproduction www.snapper.com 22 Maintenance W ARNING DO NOT attempt any adjustments, maintenance, service or repairs with the engine running. STOP engine. STOP blade. Engage parking brake. Remove key. Remove spark plug wire from spark plug and secure away from plug.
Not for Reproduction 23 Maintenance en es fr W ARNING DO NOT attempt any adjustments, maintenance, service or repairs with the engine running. STOP engine. STOP blade. Engage parking brake. Remove key. Remove spark plug wire from spark plug and secure away from plug.
Not for Reproduction www.snapper.com 24 Maintenance W ARNING DO NOT attempt any adjustments, maintenance, service or repairs with the engine running. STOP engine. STOP blade. Engage parking brake. Remove key. Remove spark plug wire from spark plug and secure away from plug.
Not for Reproduction 25 Maintenance en es fr W ARNING DO NOT attempt any adjustments, maintenance, service or repairs with the engine running. STOP engine. STOP blade. Engage parking brake. Remove key. Remove spark plug wire from spark plug and secure away from plug.
Not for Reproduction www.snapper.com 26 Maintenance W ARNING DO NOT attempt any adjustments, maintenance, service or repairs with the engine running. STOP engine. STOP blade. Engage parking brake. Remove key. Remove spark plug wire from spark plug and secure away from plug.
Not for Reproduction 27 Maintenance en es fr W ARNING DO NOT attempt any adjustments, maintenance, service or repairs with the engine running. Stop engine. Stop blade. Engage parking brake. Remove key. Remove spark plug wire from spark plug and secure away from plug.
Not for Reproduction www.snapper.com 28 Maintenance W ARNING DO NOT attempt any adjustments, maintenance, service or repairs with the engine running. Stop engine. Stop blade. Engage parking brake. Remove key. Remove spark plug wire from spark plug and secure away from plug.
Not for Reproduction 29 Maintenance en es fr W ARNING DO NOT attempt any adjustments, maintenance, service or repairs with the engine running. STOP engine. STOP blade. Engage parking brake. Remove key. Remove spark plug wire from spark plug and secure away from plug.
Not for Reproduction www.snapper.com 30 Maintenance W ARNING DO NOT attempt any adjustments, maintenance, service or repairs with the engine running. STOP engine. STOP blade. Engage parking brake. Remove key. Remove spark plug wire from spark plug and secure away from plug.
Not for Reproduction 31 Repair en es fr W ARNING DO NOT attempt any adjustments, maintenance, service or repairs with the engine running. STOP engine. STOP blade. Engage parking brake. Remove key. Remove spark plug wire from spark plug and secure away from plug.
Not for Reproduction www.snapper.com 32 Repair W ARNING DO NOT attempt any adjustments, maintenance, service or repairs with the engine running. STOP engine. STOP blade. Engage parking brake. Remove key. Remove spark plug wire from spark plug and secure away from plug.
Not for Reproduction 33 Repair en es fr W ARNING DO NOT attempt any adjustments, maintenance, service or repairs with the engine running. STOP engine. STOP blade. Engage parking brake. Remove key. Remove spark plug wire from spark plug and secure away from plug.
Not for Reproduction www.snapper.com 34 T roubleshooting PROBLEM PROBABLE CAUSE CORRECTIVE ACTION Engine Will Not Start 1. Operator not in seat. 1. Sit in operator seat. 2. Ignition is in the OFF position. 2. Turn ignition switch to the START position.
Not for Reproduction 35 PROBLEM PROBABLE CAUSE CORRECTIVE ACTION Rider Will Not Move Or Loss of Traction (Manual Drive Models) 1. Drive disc worn or damaged. 1. Replace drive disc. Contact authorized dealer. 2. Rubber drive disc is not tracking properly on drive disc.
Not for Reproduction www.snapper.com 36 W arranties 1737660H Rev C BRIGGS & STRA TTON PR ODUCTS W ARRANTY POLIC Y April 2012 LIMITED W ARRANTY Briggs & Stratton warr ants that, during the warranty period specified below , it will repair or r eplace, free of charge, any part that is def ective in material or workmanship or both.
Not for Reproduction 37 W arranties en es fr 381535 (Rev-) California, U.S. EP A, and Briggs & Stratton Corporation Emissions Control W arranty Statement Y our Warranty Rights A nd Obligations September 2012 The California Air Resources Board, U.S.
Not for Reproduction www.snapper.com 38 Notes.
Not for Reproduction 39 Notes.
Not for Reproduction www.snapper.com * Power Ratings: The gross power rating for individual gas engine models is labeled in accordance with SAE (Society of Automotive Engineers) code J1940 (Small Engine Power & Torque Rating Procedure), and rating performance has been obtained and corrected in accordance with SAE J1995 (Revision 2002-05).
An important point after buying a device Briggs & Stratton 7800918-00 (or even before the purchase) is to read its user manual. We should do this for several simple reasons:
If you have not bought Briggs & Stratton 7800918-00 yet, this is a good time to familiarize yourself with the basic data on the product. First of all view first pages of the manual, you can find above. You should find there the most important technical data Briggs & Stratton 7800918-00 - thus you can check whether the hardware meets your expectations. When delving into next pages of the user manual, Briggs & Stratton 7800918-00 you will learn all the available features of the product, as well as information on its operation. The information that you get Briggs & Stratton 7800918-00 will certainly help you make a decision on the purchase.
If you already are a holder of Briggs & Stratton 7800918-00, but have not read the manual yet, you should do it for the reasons described above. You will learn then if you properly used the available features, and whether you have not made any mistakes, which can shorten the lifetime Briggs & Stratton 7800918-00.
However, one of the most important roles played by the user manual is to help in solving problems with Briggs & Stratton 7800918-00. Almost always you will find there Troubleshooting, which are the most frequently occurring failures and malfunctions of the device Briggs & Stratton 7800918-00 along with tips on how to solve them. Even if you fail to solve the problem, the manual will show you a further procedure – contact to the customer service center or the nearest service center
