
Wireless Transmitter with Universal Plug-and-Play Audio
Product Introduction UHF all-purpose wireless microphone is suitable to all kinds of audio equipment as much as PA system. The standard 3.5mm plug convertable to 6.5mm plug is very convenient. Stable signals, sounds loud and clear.


Power switch USB Charging

3.5mm plug
Operation 1. Switch Order: Dial the switch of the receiver to ON, then dial the switch of headset microphone to ON. 2. Frequency conversion/frequency conversion steps: A. Automatic Frequency: When the receiver and microphone are turned ON, the reception indicator (blue) changes from flashing to constant light, and the head- mounted emission indicator (red) changes from flashing to constant light. B. Manual frequency conversion: Keep the receiver and wore a transmitter in the open, and let the receiver light with the launch of the lamp head 15 cm distance corresponding to each other, and then press and hold M button on the trans- mitter for three seconds, receiver light’s blue and launch the red light flashing began to sweep at the same time, when the lights stop flashing and stays on, the frequency conversion succeed. Press M mode button of transmitter one time to change frequency. 3. Charging: When the receiver is charging using the charger, the charging indicator light is bright red; When the charging is complete, the indicator lights off. 4. Volume Adjustment: the default volume of power ON is 5 level (medium volume), adjust V+ to increase the volume and V- to decrease. The volume level is not saved. The default volume is turned ON.


Questions? Issues? We are here to help! Phone: (1) 718-535-1800 Email: support@pyleusa.com
Pages referenced in this manual — manufacturer, support and downloads.
Owners and our team usually reply within a day — and your question helps the next person too.
Be the first to ask — other owners or our team will answer.