Instruction/ maintenance manual of the product 1695287 Briggs & Stratton
Go to page of 14
A TT A CHMENT OPERA T OR’S MANU AL 42” 2-Bin Bagger Mfg. No. Description 1695287 42” 2-Bin Bagger 1734239 Rev. 00 Rev. Date 01/2007 TP 100-4451-00-AT-SN 2-BIN B A GGER.
THIS P A GE INTENTIONALL Y BLANK.
1 Safety Rules & Inf ormation General W arnings ............................................2 Saf ety Decals ..................................................2 General Operating Instructions Bef ore Operation .....................................
2 Safety Rules & Information Read these safety rules and follow them closely. Failure to obey these rules could result in loss of control of unit, severe personal injury or death to you, or bystanders, or damage to property or equipment. The triangle in text signifies important cautions or warnings which must be followed.
Bef ore Operation Clear the lawn of all sticks, stones, wire and other debris which may be caught or thrown by the mower blades. Check grass condition. If wet, wait until later in the day. If grass is wet, the grass catcher is likely to become plugged.
Initial Installation 4 W ARNING To avoid serious injury, engage parking brake, disengage PTO, stop engine, remove key and disconnect spark plug(s) before attempting to install, remove or work on the mower. NOTE: In this manual, “left” and “right” are always defined from the standpoint of the operator position facing forward from seat.
5 Hitch Installation HITCH INST ALLA TION Hitch Installation 1. Remove 5/16-16 nut (G, Figure 2) from seat deck support capscrew (E). 2. Remove 3/8-16 nut (F) from rear debris guard capscrew (D). 3. Remove 1/2-13 nut (H) from rear of frame (A). 4. Remove 3/8-16 nut (I) from rear transmission support (J).
6 Bag Support and Cover Installation Figure 3. Install Bag and Cover Support A. Upright Support B. Bag and Cover Support C. Support Mount D. Mount Pin E.
7 Bag Installation and T ube Assembly INSTALL COLLECTOR BAGS 1. Raise the cover (A, Figure 5). 2. Attach collector bags (B) using grass bag hanger (C) to bag hanger post (D). A D Figure 5. Install Collector Bags A. Cover B. Collector Bags C. Grass Bag Hanger D.
8 Chute and T ube Installation Chute Installation 1. Install 5/16 x 3/4” carriage bolts (D, Figure 7) with 5/16 push nuts (E) to mower deck as shown. 2. Lift discharge deflector(B). 3. Place the holes of the chute (A) onto carriage bolts (D, installed in step 1), sliding the front edge of the chute under the hinge bracket.
9 THIS P A GE INTENTIONALL Y BLANK.
Normal Installation & Removal 10 Figure 9. Normal Installation & Removal A. Hitch Support Assembly B. Bag and Cover Support Assembly C. Shoulder Bolt D. Mount Pin E. Retainer Spring F. Hinge Pin G. Retainer Spring H. Cover Hinge Pivots I. Cover J.
Normal Removal 11 Remov al 1. Unhook rubber strap (P, Figure 9) from pin (Q), then remove tube assembly (O) from chute (R) and from cover (I). 2. Lift cover (I) and remove bags (J) from bag and cover support assembly (B). Note: Support the cover during the next step.
Briggs & Stratton Yard Power Products Group Copyright © 2007 Briggs & Stratton Corporation Milwaukee, WI USA. All Rights Reserved MANUFACTURING, INC. Simplicity Mfg. Inc. 500 N Spring Street / PO Box 997 Port Washington, WI 53074-0997 www.SimplicityMfg.
An important point after buying a device Briggs & Stratton 1695287 (or even before the purchase) is to read its user manual. We should do this for several simple reasons:
If you have not bought Briggs & Stratton 1695287 yet, this is a good time to familiarize yourself with the basic data on the product. First of all view first pages of the manual, you can find above. You should find there the most important technical data Briggs & Stratton 1695287 - thus you can check whether the hardware meets your expectations. When delving into next pages of the user manual, Briggs & Stratton 1695287 you will learn all the available features of the product, as well as information on its operation. The information that you get Briggs & Stratton 1695287 will certainly help you make a decision on the purchase.
If you already are a holder of Briggs & Stratton 1695287, but have not read the manual yet, you should do it for the reasons described above. You will learn then if you properly used the available features, and whether you have not made any mistakes, which can shorten the lifetime Briggs & Stratton 1695287.
However, one of the most important roles played by the user manual is to help in solving problems with Briggs & Stratton 1695287. Almost always you will find there Troubleshooting, which are the most frequently occurring failures and malfunctions of the device Briggs & Stratton 1695287 along with tips on how to solve them. Even if you fail to solve the problem, the manual will show you a further procedure – contact to the customer service center or the nearest service center
