Instruction/ maintenance manual of the product 1687286 Briggs & Stratton
Go to page of 24
Installation Instructions P o wer Steering Con ver sion Kit Mfg. No . 1687286, 1687302 For Prestige / 500 / 1800 / 2800 Series Tractors.
.
i P o wer Steering Con version Kit T able of Contents SECTION CONTENTS General Information Safety Personal Protective Equipment ................................................... 1-1 Battery/Electrolyte Saftey ........................................
ii Installation Instructions T ab le of Contents.
1-1 Safety Rules General Information SER VICE AND MAINTENANCE P ersonal Pr otective Equipment • Wear protective safety glasses whenever using hand or power tools, shop equipment, and whenever work- ing under power equipment to protect your eyes from falling debris and small parts.
1-2 General Information Safety Rules W ork Area Safety • Always keep the work area clear of clutter from dis- carded parts, and debris from parts boxes or packag- ing materials. Small parts, hardware items, and other debris or refuse left lying around can become slip, trip, and fall hazards if not removed and discarded of properly.
1-3 Safety Rules General Information GENERAL REP AIR INFORMA TION In addition to providing specific repair procedures for the equipment listed at the beginning of this section, this manual provides the following additional general instruc- tions for dealing with repairs to various types of compo- nents.
1-4 General Information Safety Rules Fastener s & Har dware All hardware and fasteners used in this equipment must meet factory specifications for SAE grade, size, and torque, and must be kept securely tightened. Locking hardware that degrades with use should be replaced when service is performed in affected areas.
1-5 Safety Rules General Information NO TES.
.
2-1 P o wer Steering Con version Kit Installation Instructions P o wer Steering Con ver sion Components Figure 1. Contents 1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19 20 21 22 23 24 24 25 26 25 26.
2-2 Installation Instructions P o wer Steering Con version Kit Ref Part No. Qty. Description 1 1733139A 1 TOWER, Steering 2 1733044A 1 PLATE, Support 3 1924856 4 SCREW,Taptite 5/16-18 x 1/2 4 1960655 .
2-3 P o wer Steering Con version Kit Installation Instructions NOTE: Read through these instructions, the SERVICE MANUAL, and OPERATOR’S MANUAL before beginning installation. INITIAL ASSEMBL Y Hitch Replacement 1. Remove mower deck. See OPERATOR’S MANUAL .
2-4 Installation Instructions P o wer Steering Con version Kit A 7. Remove front axle and steering linkage. See SERVICE MANUAL, SECTION 8 - Steering & Front Wheel Repair. 8. Remove J-hook (A, Figure 4) from original axle (B). Save J-hook (A), 7/16-14 x 2 capscrews (C), and 7/16-14 lock nuts (D) for installation on new axle.
2-5 P o wer Steering Con version Kit Installation Instructions 15. Install hydraulic perma-push fittings (B, Figure 7) to steering cylinder (A) as shown.
2-6 Installation Instructions P o wer Steering Con version Kit 19. Install new axle (A, Figure 11) between axle support plate (B) and frame (C) using a 5/8-11 x 3-1/2 cap- screw (D), two 5/8 flat washers (E), and a 5/8-11 flange nut (F) as shown. Tighten flange nut to 150 ft.
P o wer Steering Con version Kit Installation Instructions 2-7 Steering Replacement T ear-do wn and Remov al of Steering System 1. See the SERVICE MANUAL, Section 10 - Hydraulic System Service for removal and installation of the valve control spool. 2.
2-8 Installation Instructions P o wer Steering Con version Kit NOTE: For initial installation, only two screws are used (as shown) and the screws are to be loosely installed to allow the tower to pivot. 3. Attach new tower assembly (A, Figure 15) to frame (A) using two 3/8-16 x 3/4 taptite screws (C).
2-9 P o wer Steering Con version Kit Installation Instructions Figure 17 Power Steering & Hydraulic Hose Installation A. Power Steering Unit B. Control Valve Spool C. Three-way “T” D. Hydraulic Tube (from Port P to Transmission) E. Hydraulic Hose (Port T) to “T” fitting F.
2-10 Installation Instructions P o wer Steering Con version Kit A B Figure 18 Hydraulic Tube to Transmission A. Transmission Port B. Hydraulic Tube Figure 19 Hydraulic Hose Routing A. Bulkhead Heatshield B. Frame C. Hydraulic Hose (labeled “Port R”) D.
2-11 P o wer Steering Con version Kit Installation Instructions Tilt & Steering Wheel Installation Battery , Dash, Seat Deck, Seat, and Hood Assembl y Installation 1. Install battery, but DO NOT connect. 2. Install seat deck and seat. See the SERVICE MANUAL, Section 16 - Seat Deck & Fuel Tank Service.
.
Installation Instructions T or que Specifications T or que Specification Chart FOR ST ANDARD MACHINE HARDW ARE (T olerance ± 20%) Hardware Grade SAE Grade 2 SAE Grade 5 SAE Grade 8 Size Of in/lbs in/lbs in/lbs Hardware ft/lbs Nm. ft/lbs Nm. ft/lbs Nm.
NO TES MANUFACTURING, INC. 500 N Spring Street / PO Box 997 Port Washington, WI 53074-0997 USA Form No. 1733944-00 Rev. 02/2007 TP 200-4492-00-SK-SMAN Briggs & Stratton Yard Power Products Group Copyright © 2007 Briggs & Stratton Corporation Milwaukee, WI USA.
An important point after buying a device Briggs & Stratton 1687286 (or even before the purchase) is to read its user manual. We should do this for several simple reasons:
If you have not bought Briggs & Stratton 1687286 yet, this is a good time to familiarize yourself with the basic data on the product. First of all view first pages of the manual, you can find above. You should find there the most important technical data Briggs & Stratton 1687286 - thus you can check whether the hardware meets your expectations. When delving into next pages of the user manual, Briggs & Stratton 1687286 you will learn all the available features of the product, as well as information on its operation. The information that you get Briggs & Stratton 1687286 will certainly help you make a decision on the purchase.
If you already are a holder of Briggs & Stratton 1687286, but have not read the manual yet, you should do it for the reasons described above. You will learn then if you properly used the available features, and whether you have not made any mistakes, which can shorten the lifetime Briggs & Stratton 1687286.
However, one of the most important roles played by the user manual is to help in solving problems with Briggs & Stratton 1687286. Almost always you will find there Troubleshooting, which are the most frequently occurring failures and malfunctions of the device Briggs & Stratton 1687286 along with tips on how to solve them. Even if you fail to solve the problem, the manual will show you a further procedure – contact to the customer service center or the nearest service center
