Instruction/ maintenance manual of the product 1687227 Briggs & Stratton
Go to page of 4
INST ALLA TION Disassemble Housing 1. Remove the washers and retaining rings (D, Figure 2) from both ends of the auger shaft. Remove the bearings (C). 2. Remove the hardware securing both side covers (A), and remove the side covers. 1 Installation Instructions Gear Case Kit P ar t No .
2 Installation Instructions Gear Case Kit Figure 3. Auger Assembly Remove A uger Assembly 1. Remove the impeller set screw (D, Figure 3) and drive pulley set screws (B). 2. Spray the impeller and pulley hubs with penetrating oil to help with disassembly.
3 Gear Case Kit Installation Instructions Assemble Housing 1. Install the side covers (A, Figure 4) and secure with the original hardware. 2. Reinstall the bearings (C), washers, and retaining rings (D) in both side covers. Fill A uger Gear Case Oil 1.
4 Installation Instructions Gear Case Kit NO TES MANUFACTURING, INC. 500 N Spring Street / PO Box 997 Port Washington, WI 53074-0997 USA Form No. 1732778-01 Rev. 12/2006 TP 200-4412-01-SK-SN Briggs & Stratton Yard Power Products Group Copyright © 2006 Briggs & Stratton Corporation Milwaukee, WI USA.
An important point after buying a device Briggs & Stratton 1687227 (or even before the purchase) is to read its user manual. We should do this for several simple reasons:
If you have not bought Briggs & Stratton 1687227 yet, this is a good time to familiarize yourself with the basic data on the product. First of all view first pages of the manual, you can find above. You should find there the most important technical data Briggs & Stratton 1687227 - thus you can check whether the hardware meets your expectations. When delving into next pages of the user manual, Briggs & Stratton 1687227 you will learn all the available features of the product, as well as information on its operation. The information that you get Briggs & Stratton 1687227 will certainly help you make a decision on the purchase.
If you already are a holder of Briggs & Stratton 1687227, but have not read the manual yet, you should do it for the reasons described above. You will learn then if you properly used the available features, and whether you have not made any mistakes, which can shorten the lifetime Briggs & Stratton 1687227.
However, one of the most important roles played by the user manual is to help in solving problems with Briggs & Stratton 1687227. Almost always you will find there Troubleshooting, which are the most frequently occurring failures and malfunctions of the device Briggs & Stratton 1687227 along with tips on how to solve them. Even if you fail to solve the problem, the manual will show you a further procedure – contact to the customer service center or the nearest service center
