

Thank you for purchasing this SHARP product. To obtain the best performance from this product, please read this manual carefully. It will guide you in operating your SHARP product.


Please confirm that only the following accessories are included.
Supply of this product does not convey a license nor imply any right to distribute content created with this product in revenue-generating broadcast systems (terrestrial, satellite, cable and/or other distribution channels), revenue generating streaming applications (via Internet, intranets and/or other networks), other revenue-generating content distribution systems (pay-audio or audio-on-demand applications and the like) or on revenue-generating physical media (compact discs, digital versatile discs, semiconductor chips, hard drives, memory cards and the like). An independent license for such use is required. For details, please visit http://mp3licensing.com MPEG Layer-3 audio coding technology licensed from Fraunhofer IIS and Thomson.

For users in U.S.
IC Radiation Exposure Statement (For Users In Canada) This Class B digital apparatus complies with the Canadian ICES-003 Class B specifications. This device complies with Industry Canada license-exempt RSS standard(s). Operation is subject to the following two conditions: 1. this device may not cause interference, and
RISK OF ELECTRIC SHOCK DO NOT OPEN
Explanation of Graphical Symbols:
The lightning flash with arrowhead symbol, within an equilateral triangle, is intended to alert the user to the presence of uninsulated “dangerous voltage” within the product’s enclosure that may be of suffi- cient magnitude to constitute a risk of electric shock to persons.
This equipment should be installed and operated with a mini- mum distance of 20 cm between the radiator and person’s body.
This reminder is provided to call the CATV system installer’s attention to Article 820 of the National Electrical Code that provides guidelines for proper grounding and, in particular, specifies that the cable ground shall be connected to the grounding system of the building, as close to the point of cable entry as practical.
The exclamation point within an equilateral triangle is intended to alert the user to the presence of impor- tant operating and maintenance (servicing) instruc- tions in the literature accompanying the appliance.
For your assistance in reporting this unit in case of loss or theft, please record below the model number and serial number which are located on the rear of the unit. Please retain this information.
Model number
This product is classified as a CLASS 1 LASER PRODUCT Caution - Use of any controls, adjustments or procedures other than those specified herein may result in hazardous radiation exposure.
Serial number
Date of purchase
Place of purchase
This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protec- tion against harmful interference in a residential installation. This equipment generates, uses, and can radiate radio frequency energy and, if not installed and used in accordance with the in- structions, may cause harmful interference to radio communica- tions. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures:
The Bluetooth® word mark and logos are registered trademarks owned by the Bluetooth SIG, Inc. and any use of such marks by SHARP is under license. Other trademarks and trade names are those of their respective owners.
Electricity is used to perform many useful functions, but it can also cause personal injuries and property damage if improperly handled. This product has been engineered and manufactured with the highest priority on safety. However, improper use can result in electric shock and/or fire. In order to prevent potential danger, please observe the following instructions when installing, operating and cleaning the product. To ensure your safety and prolong the service life of this product, please read the following precautions carefully before use. 1) Read these instructions. 2) Keep these instructions. 3) Heed all warnings. 4) Follow all instructions. 5) Do not use this apparatus near water. 6) Clean only with dry cloth. 7) Do not block any ventilation openings. Install in accordance with the manufacturer’s instructions. 8) Do not install near any heat sources such as radiators, heat registers, stoves, or other apparatus (including amplifiers) that produce heat. 9) Do not defeat the safety purpose of the polarized or grounding- type plug. A polarized plug has two blades with one wider than the other. A grounding type plug has two blades and a third grounding prong. The wide blade or the third prong are provided for your safety. If the provided plug does not fit into your outlet,
FCC Radiation Exposure Statement
This device complies with the limits for a Class B digital device, pursuant to Part 15 of the FCC Rules. It must not be co-located or operating in conjunction with any other antenna or transmitter.
Operation is subject to the following two conditions:
This equipment should be installed and operated with a mini- mum distance of 20 cm between the radiator and person’s body.

consult an electrician for replacement of the obsolete outlet. 10) Protect the power cord from being walked on or pinched par- ticularly at plugs, convenience receptacles, and the point where they exit from the apparatus. 11) Only use attachments/accessories specified by the manufac- turer. 12) Use only with the cart, stand, tripod, bracket, or table specified by the manufacturer, or sold with the apparatus. When a cart is used, use caution when moving the cart/apparatus combination to avoid injury from tip-over. 13) Unplug this apparatus during lightning storms or when unused for long periods of time. 14) Refer all servicing to qualified service personnel. Servicing is required when the apparatus has been damaged in any way, such as power-supply cord or plug is damaged, liquid has been spilled or objects have fallen into the apparatus, the apparatus has been exposed to rain or moisture, does not operate nor- mally, or has been dropped. Additional Safety Information 15) Power Sources - This product should be operated only from the type of power source indicated on the marking label. If you are not sure of the type of power supply to your home, consult your product dealer or local power company. For product intended to operate from battery power, or other sources, refer to the operat- ing instructions. 16) Overloading - Do not overload wall outlets, extension cords, or integral convenience receptacles as this can result in a risk of fire or electric shock. 17) Object and Liquid Entry - Never push objects of any kind into this product through openings as they may touch dangerous voltage points or short-out parts that could result in a fire or elec- tric shock. To prevent fire or shock hazard, do not expose this appliance to dripping or splashing. No objects filled with liquids, such as vases, shall be placed on the apparatus. 18) Damage Requiring Service - Unplug this product from the wall outlet and refer servicing to qualified service personnel under the following conditions: a. When the AC cord or plug is damaged, b. If liquid has been spilled, or objects have fallen into the prod-
cuits. When installing an outside antenna system, extreme care should be taken to keep from touching such power lines or cir- cuits as contact with them might be fatal. 23) Protective Attachment Plug - The product is equipped with an attachment plug having overload protection. This is a safety feature. See Instruction Manual for replacement or resetting of protective device. If replacement of the plug is required, be sure the service technician has used a replacement plug specified by the manufacturer that has the same overload protection as the original plug.
24) Stand - Do not place the product on an unstable cart, stand, tripod or table. Placing the product on an unstable base can cause the product to fall, resulting in serious personal injuries as well as damage to the product. Use only a cart, stand, tripod, bracket or table recommended by the manufacturer or sold with the product. When mounting the product on a wall, be sure to follow the manufacturer’s instructions. Use only the mounting hardware recommended by the manufacturer.
uct, c. If the product has been exposed to rain or water, d. If the product does not operate normally by following the oper-
ating instructions. Adjust only those controls that are covered by the operating instructions as an improper adjustment of other controls may result in damage and will often require ex- tensive work by a qualified technician to restore the product to its normal operation, e. If the product has been dropped or damaged in any way, and f. When the product exhibits a distinct change in performance -
this indicates a need for service. 19) Replacement Parts - When replacement parts are required, be sure the service technician has used replacement parts speci- fied by the manufacturer or have the same characteristics as the original part. Unauthorized substitutions may result in fire, electric shock, or other hazards. 20) Safety Check - Upon completion of any service or repairs to this product, ask the service technician to perform safety checks to determine that the product is in proper operating condition. 21) Wall or ceiling mounting - When mounting the product on a wall or ceiling, be sure to install the product according to the method recommended by the manufacturer. 22) Power Lines - An outside antenna system should not be located in the vicinity of overhead power lines or other electric light or power circuits, or where it can fall into such power lines or cir-
6” (15 cm) · 6” (15 cm) · 6” (15 cm)

The voltage used must be the same as that specified on this unit. Using this product with a higher voltage other than that which is specified is dangerous and may result in a fire or other type of accident causing damage. SHARP will not be held responsible for any damage resulting from use of this unit with a voltage other than that which is specified.
The sound level at a given volume setting depends on speaker efficiency, location and various other factors. It is advisable to avoid exposure to high volume levels, which occurs while turning the unit on with the volume control setting up high, or while continually listening at high volumes. Excessive sound pressure from earphones and headphones can cause hearing loss.
CONSUMER LIMITED WARRANTY
MIZARI ENTERPRISES, INC. warrants to the first consumer purchaser that this Sharp brand product (the "Product"), when shipped in its original container, will be free from defective workmanship and materials, and agrees that it will, at its option, either repair the defect or replace the defective Product or part thereof with a new or remanufactured equivalent at no charge to the purchaser for parts or labor for the period(s) set forth below.
This warranty does not apply to any appearance items of the Product nor to the additional excluded item(s) set forth below nor to any Product the exterior of which has been damaged or defaced, which has been subjected to improper voltage or other misuse, abnormal service or handling, or which has been altered or modified in design or construction.
In order to enforce the rights under this limited warranty, the purchaser should follow the steps set forth below and provide proof of purchase to the servicer.
The limited warranty described herein is in addition to whatever implied warranties may be granted to purchasers by law. ALL IMPLIED WARRANTIES INCLUDING THE WARRANTIES OF MERCHANTABILITY AND FITNESS FOR USE ARE LIMITED TO THE PERIOD(S) FROM THE DATE OF PURCHASE SET FORTH BELOW. Some states do not allow limitations on how long an implied warranty lasts, so the above limitation may not apply to you.
Neither the sales personnel of the seller nor any other person is authorized to make any warranties other than those described herein, or to extend the duration of any warranties beyond the time period described herein on behalf of MIZARI.
The warranties described herein shall be the sole and exclusive warranties granted by MIZARI and shall be the sole and exclusive remedy available to the purchaser. Correction of defects, in the manner and for the period of time described herein, shall constitute complete fulfillment of all liabilities and responsibilities of MIZARI to the purchaser with respect to the Product, and shall constitute full satisfaction of all claims, whether based on contract, negligence, strict liability or otherwise. In no event shall MIZARI be liable, or in any way responsible, for any damages or defects in the Product which were caused by repairs or attempted repairs performed by anyone other than an authorized servicer. Nor shall MIZARI be liable or in any way responsible for any incidental or consequential economic or property damage. Some states do not allow the exclusion of incidental or consequential damages, so the above exclusion may not apply to you.
THIS LIMITED WARRANTY IS VALID ONLY IN THE FIFTY (50) UNITED STATES, THE DISTRICT OF COLUMBIA AND PUERTO RICO.
CD-BH20 MICRO COMPONENT SYSTEM (Be sure to have this information available when you need service for your Product.) One (1) year parts and labor from the date of purchase.
Your Product Model Number & Description:
Warranty Period for this Product:
Additional Item(s) Excluded from Warranty Coverage (if any):
Accessories, supplies, and consumable items.
What to do to Obtain Service:
Call Sharp toll free at 1-800-BE-SHARP
TO OBTAIN SUPPLY, ACCESSORY OR PRODUCT INFORMATION, CALL 1-800-BE-SHARP
SHARP is a registered trademarks of SHARP CORPORATION; used under license by SHARP Corporation
MARKETED BY : MIZARI ENTERPRISES, INC.
5455 WILSHIRE BOULEVARD, SUITE 1410, LOS ANGELES, CA 90036
Model Specific Section


10 12 14


12 13 14 15 16 17
29 30 31 32

21 22 20 19 17 18 16 15 12 14 13 11


Make sure to unplug the AC power cord before making any connections.
< Attaching to the wall > < Assembling >
Connect to the TV using an audio cable.
Supplied FM antenna: Connect to the FM 75 ohms jack and position it where reception is best. External FM antenna: Use an external FM antenna (75 ohms coaxial cable) for better reception. Disconnect the supplied FM antenna wire before use. Supplied AM loop antenna:
To audio output jacks TV
Connect to the AM terminal and position it where reception is best. Place it on a shelf, etc., or attach it to a stand or a wall with screws (not supplied).
To LINE input jacks
After all connections have been made correctly, plug the AC power cord into the AC outlet.
To select Line In function:


If you turn off and on the main unit with the volume set to 27 or higher, the volume starts at 15 and fades in to the last set level.
Use 2 “AAA” size batteries (UM/SUM-4, R3, HP-16 or similar). Batteries are not included.
1 Open the battery cover. 2 Insert the batteries according to the terminal indicated in the battery compartment. When inserting or removing the batteries, push it toward the (–) battery terminals. 3 Close the cover.
Turn the volume knob toward VOL +/– (main unit) or press VOL +/– (remote control) to increase or decrease the vol- ume.

To mute the volume, press the button (remote control). Press again to restore the volume.
When you press any of the following buttons, the unit turns on.
The main unit will enter the standby mode after approxi- mately 15 minutes of inactivity during: Audio In/Line In: No detection of input signal. CD: In the stop mode or no disc. USB: In the stop mode or no media. Bluetooth: - No connection after approximately 15 minutes.
- In the pause or stop mode and no incoming sig-
nal from device after approximately 15 minutes.
1 Press the BASS or TREBLE button to select “Bass” or “Treble” respectively. 2 Within 5 seconds, press the VOL (+ or –) button to adjust the bass or treble.
The remote control can be used within the range shown below:
- 5 ↔ - 4 ↔ + 4 ↔ + 5 - 5 ↔ - 4 ↔ + 4 ↔ + 5 Press SOUND (DEFAULT) button to return sound to default settings. “SOUND DEFAULT” appears on the display. Sound default settings : Bass = 0, Treble = 0
8” - 20’ (0.2 m - 6 m)
Press the INPUT button (main unit) repeatedly to select desired function.
AM
General control
USB AUDIO IN LINE IN BLUETOOTH
Press the (ON/STANDBY) button to turn the power on or off.
Press the DIMMER button (remote control).
(Display is dim).
(Display gets dimmer).
(Display is bright).


5 To adjust the hour, press the or button and then press the ENTER button. Press the or button once to advance the time by 1 hour. Hold it down to advance continuously. 6 To adjust the minutes, press the or but- ton and then press the ENTER button. Press the or button once to advance the time by 1 minute. Hold it down to advance the time by 5 minutes interval.
To confirm the time display: Press the CLOCK button. The time display will appear for about 10 seconds. Note: When power supply is restored after unit is plugged in again or after a power failure, reset the clock. To readjust the clock: Perform “Setting the clock” from step 1. To change the 24-hour or 12-hour display: 1 Clear all the programmed contents. [Refer to “Factory reset, clearing all memory” on page 18 for details.] 2 Perform “Setting the clock” from step 1 onward.
In this example, the clock is set for the 12-hour (AM 12:00) display.
1 Press the (ON/STANDBY) button to turn the power on. 2 Press the CLOCK button. 3 Within 10 seconds, press the ENTER button. To adjust the day, press the or button and then press the ENTER button. 4 Press the or button to select 24-hour or 12-hour display and then press the ENTER button.
The 12-hour display will appear. (AM 12:00 - PM 11:59) The 12-hour display will appear. (AM 0:00 - PM 11:59) The 24-hour display will appear. (0:00 - 23:59)


Bluetooth wireless technology is a short-range radio technology that enables wireless communication between various types of digital devices, such as mobile phone or computer. It operates within a range of about 30 feet (10 meters) without the hassle of having to use cables to connect these devices. This unit supports the following: Communication System: Bluetooth Specification version 2.1 Bluetooth + Enhanced Data Rate (EDR). Support Profile : A2DP (Advanced Audio Distribution Profile) and AVRCP (Audio/Video Remote Control Profile)
1 Press the (ON/STANDBY) button to turn the power on. 2 Press the button on the main unit or BLUETOOTH
/ button on the remote control to select Bluetooth function. “BLUETOOTH” appears on the display. 3 Perform pairing procedure on the source device to detect this unit. “CD-BH20 SHARP” will appear in the detected devices list (if available) in the source device. (Refer the source device operating manual for details). Notes:

Bluetooth devices need to be initially paired first before they can exchange data. This unit can memorize up to a maximum of 20 devices. Once paired, it is not necessary to pair them again unless:
Indicators:
However, the indication status is not displayed during Bluetooth standby mode.

Check that:
You can connect a set of Bluetooth headphones to this unit. Before making the connection, check that:
1 Press the (ON/STANDBY) button to turn the power on. 2 Press the button on the main unit or BLUETOOTH button on the remote control to select Bluetooth function. 3 Start the Bluetooth connection from the Bluetooth audio source device. 4 Press the BLUETOOTH / button.
1 Select a desired function to listen to, except for Blue- tooth function. 2 Press and hold the HEADPHONE LINK button on the remote control until “Headphone Link” appears on the display. 3 Press ENTER button. “Searching” appears on the dis- play. 4 After finish searching, the nearby devices’ names will be shown on the display. Press or to select the desired device and then press ENTER button. “Con- nected” appears on the display and Headphone Link LED (green) lights up.
pairing mode. Refer to the manual supplied with it. - Press button. - Repeat steps 2 - 4.
Perform any of the followings. – Press PAIRING button until “Disconnected” appears on the display. – Disconnect or turn off the Bluetooth connection on the audio source
To disconnect the Bluetooth headphone:
device. Refer the operating manual supplied with the device. – Turn off this unit.
Turn off the Bluetooth mode on the connected Bluetooth headphone. Refer to the manual supplied with it.
“Disconnected” appears and Headphone Link LED (green) lights off.
During Bluetooth standby mode, the unit will automatically power on when the Bluetooth connection is set up between the main unit and your device. Note: This function is not applicable during Bluetooth standby mode off.
To re-link with the previous headphone device:
The device must be in pairing mode and within range. 1 Press the HEADPHONE LINK button. “Headphone Link” will be blinking depending on the last connection. 2 Within 5 seconds press the ENTER button. “Linking” will be displayed. “Connected” appears if re-link pro- cess is successful. Note: If “Not found” appears, repeat from step 1. Make sure that the device to be connected is within range and in pairing mode.

To random play all tracks: Press PLAY MODE button on the remote control repeatedly until “Random” appears. Press the / (CD / ) button. To cancel random play: Press the PLAY MODE button again until “Normal” appears. “RDM” indicator will disappear.
1 Press the (ON/STANDBY) button to turn the power on. 2 Press the INPUT button repeatedly on the main unit to select CD function. 3 Press the (OPEN/CLOSE) button to open the disc com- partment. 4 Place the disc on the disc compartment, label side up. 5 Press the (OPEN/CLOSE) button to close the disc tray. 6 Press the / (CD / ) button to start playback.
You can resume playback from the track playback is stopped. 1 While a disc is playing, press the button once. 2 To resume play, press the CD / button. Playback resumes from the track you stopped. To cancel the resume playback: Press the button twice.

To cancel the programmed play mode: During programmed stop mode, press the button. The display will show “Memory Clear” and all the programmed contents will be cleared. Adding tracks to the program: If a program has been previously stored, the “MEM” in- dicator will be displayed. During stop mode, press the MEMORY button once. Within 10 seconds, press and hold the MEMORY button again. Then follow steps 2 - 3 to add tracks. Notes:
Repeat play can play one track, all tracks or a programmed se- quence continuously. To repeat one track: Select desired track using the or button. Press the PLAY MODE button repeatedly until “Repeat One” ap- pears. Press the / (CD / ) button. To repeat all tracks: Press the PLAY MODE button repeatedly until “Repeat All” ap- pears. Press the / (CD / ) button. To repeat desired tracks: Perform steps 1 - 5 in “Programmed play” section on this page and then press the PLAY MODE button repeatedly until “Memory Repeat” appears. To repeat one folder: While in Folder mode on (MP3), press PRESET ( or ) to se- lect desired folder. Press PLAY MODE button repeatedly until “Repeat Folder” appears. Press the / (CD / ) button. To cancel repeat play: Press the PLAY MODE button repeatedly until “Normal” appears and “ ” disappears.
To play back CD-R/RW. 1 In CD function, load an MP3 disc. Press the FOLDER button and disc info will be displayed.
Total number of folder 2 Press the PRESET ( or ) button to select desired playback folder. (Folder mode on)
Total number of files
1 While in the stop mode, press the MEMORY button on the remote control to enter the programming save mode. 2 Press the or button to select the de- sired track.
FOLDER number First track number in the folder 3 Select desired file to be played back by pressing the or button. 4 Press the / (CD / ) button. Playback will start and file name will be displayed.
Selected track number 3 Press the MEMORY button to save the track number. 4 Repeat steps 2 - 3 for other tracks. Up to 32 tracks can be programmed. If you want to check the programmed tracks, during stop mode, press the MEMORY button repeatedly. To clear the programmed tracks, press the CLEAR button. 5 Press the / (CD / ) button to start playback.
1 While in the stop mode, press the MEMORY button to enter the programming save mode. 2 Press the PRESET ( or ) button on the remote con- trol to select the desired folder.

Folder display File name display
Title display Counter display
Then press the or button (remote con- trol) to select the desired tracks.
3 Press the MEMORY button to save the folder and track number. 4 Repeat steps 2 – 3 for other folder/tracks. Up to 32 tracks can be programmed. 5 Press the / (CD / ) button to start playback.

Page Various disc functions 11 Random play 11 Repeat play 12 Programmed play (MP3) 12
1 Press the INPUT button (main unit) repeatedly to se- lect USB function. Connect the USB memory device that has MP3 format files on the unit. When the USB memory is connected to the main unit, the device infor- mation will be displayed. To playback with folder mode on, follow step 2 below. To playback with folder mode off, skip to step 3 below. 2 Press the FOLDER button, and press the PRESET ( or ) button to select desired playback folder. To start playback, go to step 4. To change the playback folder, press the PRESET ( or ) button to select another folder. 3 Select desired file to be played back by pressing the or button. 4 Press the / (USB / ) button. Playback will start and the file name will be displayed.
1 Press the button twice to stop playback. 2 Disconnect USB memory device from the USB terminal.

You can store 40 AM and FM stations in memory and recall them at the push of a button. (Preset tuning) 1 Perform steps 2 - 3 in “Tuning”. 2 Press the MEMORY button.
3 Within 30 seconds, press the PRESET ( or ) button to select the preset channel number. Store the stations in memory, in order, starting with preset channel 1. 4 Within 30 seconds, press the MEMORY button to store that station in memory. If the “MEM” and preset num- ber indicators disappear before the station is memo- rized, repeat the operation from step 2. 5 Repeat steps 1 - 4 to set other stations, or to change a preset station. When a new station is stored in the memory, the station previously memorized for that pre- set channel number will be erased. Note: The backup function protects the memorized stations for a few hours should there be a power failure or the AC power cord become disconnected.
Press the PRESET ( or ) button to select the desired station.
1 Press and hold the PRESET ( or ) button until the preset number flashes. The programmed stations will be tuned in sequentially, for 5 seconds each. 2 Press the PRESET ( or ) button again when the desired station is located.
1 Press the (ON/STANDBY) button to turn the power on. 2 Press the INPUT button (main unit) repeatedly or TUNER (BAND) button (remote control) to select Tuner function. 3 In Tuner function, press and hold the CLEAR button (remote control) until “Tuner Clear” appears.

Timer playback:
The unit turns on and plays the desired source (CD, TUNER, USB, AUDIO IN, LINE IN) at a preset time.
This unit has 2 types of timer: ONCE TIMER and DAILY TIMER.
Once timer (“ ” indicator): Once timer play works for one time only at a preset time. Daily timer (“DAILY” indicator): Daily timer play works at the same preset time every day that we set. For example, set the timer as a wake-up call every morning. Using the once timer and daily timer in combination: For example, use the once timer to listen to a radio program, and use the daily timer to wake up. 1 Set the daily and once timer (page 15).
12 When the preset time is reached, playback will start. The volume will increase gradually until it reaches the preset volume. The timer indicator will blink during timer playback. 13 When the timer end time is reached, the system will enter the power standby mode automatically. Once timer: The timer will be canceled. Daily timer: The timer operates at the same time every selected day. Cancel the daily timer when it is not in use. Notes:

1 Press the (ON/STANDBY) button to turn the power on. 2 Press the TIMER button. 3 Press the or button to select “Once” or “Daily”, and press the ENTER button. 4 Press the or button to select “Timer Set”, and press the ENTER button. 5 To select the timer playback source (CD, TUNER, USB, AUDIO IN, LINE IN), press the or button. Press the ENTER button. When you select the tuner, select a station by press- ing the or button, and then press the ENTER button. If a station has not been programmed, “No Preset” will be displayed and timer setting will be canceled. To memorize a station, refer ‘Memorising a station’ on page 14. 6 To adjust the day, press the or button and then press the ENTER button. 7 Press the or button to adjust the hour, and then press the ENTER button. 8 To adjust the minutes, press the or button and then press the ENTER button. 9 Set the time to finish as in steps 7 and 8 above. 10 To adjust the volume, press the or but- ton and then press the ENTER button. 11 Press the (ON/STANDBY) button to enter the power standby mode. “TIMER” indicator lights up.
Checking the timer setting: 1 Turn the power on. Press the TIMER button. 2 Press the or button to select “Once” or “Daily”, and press the ENTER button. 3 Press the or button to select “Timer Call”, and press the ENTER button.
Cancelling the timer setting: 1 Turn the power on. Press the TIMER button. 2 Press the or button to select “Once” or “Daily”, and press the ENTER button. 3 Press the or button to select “Timer Off”, and press the ENTER button. Timer will be can- celed (the setting will not be canceled).
Reusing the memorized timer setting: The timer setting will be memorized once it is entered. To reuse the same setting, perform the following operations. 1 Turn the power on. Press the TIMER button. 2 Press the or button to select “Once” or “Daily”, and press the ENTER button. 3 Press the or button to select “Timer On” , and press the ENTER button. 4 Press the (ON/STANDBY) button to enter the power standby mode.

The radio, disc, USB, Audio In, Line In, and Bluetooth can all be turned off automatically. 1 Play back the desired sound source. 2 Press the SLEEP button. 3 Within 5 seconds, press the SLEEP button repeatedly to select the time.
Sleep and timer playback: For example, you can fall asleep listening to the radio and wake up to CD the next morning. 1 Set the sleep time (see above, steps 1 - 5). 2 While the sleep timer is set, set the timer playback (steps 2 - 10, page 15).
“Sleep 90” “Sleep 80” ... “Sleep 10”
“Sleep Off” 4 “SLEEP” indicator will appear. 5 The unit will enter the power standby mode automati- cally after the preset time has elapsed. The volume will be turned down 1 minute before the sleep operation finishes. To confirm the remaining sleep time: 1 While “SLEEP” is indicated, press the SLEEP button.
Desired time 1-90 minutes
Timer playback start time
To cancel the sleep operation: Press the (ON/STANDBY) button while “SLEEP” is indi- cated. To cancel the sleep operation without setting the unit to the standby mode, proceed as follows. 1 While “SLEEP” is indicated, press the SLEEP button. 2 Within 5 seconds, press the SLEEP button repeatedly until “Sleep Off” appears.

Troubleshooting chart
If something is wrong with this product, check the following be- fore calling your authorized SHARP dealer or service center.
The connection cord is not included. Purchase a commer- cially available cord as shown below.
Symptom Possible cause ●The clock is not set to the correct time.
player, etc.
Symptom Possible cause ●The remote control does not operate.
Audio cable (not supplied)
portable audio player, etc.
1 Use a connection cord to connect the portable audio player, etc. to the AUDIO IN jack. 2 Press the (ON/STANDBY) button to turn the power on. 3 Press the INPUT (AUDIO/LINE (INPUT)) button (main unit or remote control) repeatedly to select AUDIO IN function. 4 Play the connected equipment. If volume level of the connected device is too high, sound distortion may occur. Should this happen, adjust the volume of the connected device. Note: To prevent noise interference, place the unit away from the television.
Portable audio · Symptom Possible cause

1 Press the (ON/STANDBY) button to turn the power on. 2 Press INPUT button (main unit) repeatedly to enter Audio In mode. 3 Press button (main unit) once. 4 Press and hold button (main unit) until “RESET” appears.
Remove all devices connected to the unit. Then, set the unit to the power standby mode. Carrying the unit with other devices left connected or discs left inside might dam- age the unit.
Discs are fairly resistant to damage. However mistracking can occur due to accumulation of dirt on the surface.
Sudden temperature changes, storage or operation in an extremely humid environment may cause condensation inside the cabinet (CD pickup, etc.) or on the transmitter on the remote control. Condensation can cause the unit to malfunction. If this happens, leave the power on with no disc in the unit until normal playback is possible (about 1 hour). Wipe off any condensation on the transmitter with a soft cloth before operating the unit.
When this product is subject to strong external interfer- ence (mechanical shock, excessive static electricity, ab- normal supply voltage due to lightning, etc.) or if it is oper- ated incorrectly, it may malfunction.
Periodically wipe the cabinet with a soft cloth and a diluted soap solution, then with a dry cloth. Caution:
If such a problem occurs, do the following: 1 Set the unit to the standby mode and turn the power on again. 2 If the unit is not restored in the previous operation, unplug and plug in the unit again, and then turn the power on. Note: If neither operation above restores the unit, clear all the memory by resetting it.

As part of our policy of continuous improvement, SHARP reserves the right to make design and specification chang- es for product improvement without prior notice. The per- formance specification figures indicated are nominal val- ues of production units. There may be some deviations from these values in individual unit.
Type Single disc multi-play compact disc player Signal readout Non-contact, 3-beam semiconductor laser pickup D/A converter Multi bit D/A converter Frequency response
Power source AC 100 - 240 V ~ 50/60 Hz Power consumption
Dynamic range 90 dB (1 kHz)
Dimensions Width: 16 - 1/2” (420 mm) Height: 5 - 1/8” (130 mm) Depth: 11 - 1/4” (286 mm) Weight 11.0 lbs. (5 kg) Bluetooth frequency band
2.402GHz - 2.480GHz
Bluetooth maximum transmit power
A2DP (Advanced Audio Distribution
Bluetooth 2.1 +EDR
channel into 4 ohms at 1 kHz, 10% T.H.D.) FTC: 16 W minimum RMS per
channel into 4 ohms from 60 Hz to 20 kHz, 10% T.H.D. Output terminals Headphones: 16 - 50 Ω (recommended: 32 Ω) Input terminals Audio In (audio signal): 500 mV/47 k ohms Line in (Analogue input): 500 mV/47 k ohms
Frequency range FM: 87.5 - 108.0 MHz AM: 530 - 1,710 kHz Preset 40 (FM and AM station)
Type 1-way type speaker system 3” (8 cm) - 4 Ω - Full Range Maximum input power
50 W / channel
Rated input power 25 W / channel
USB host interface · + 4 dBm · Compatible Bluetooth
Pages referenced in this manual — manufacturer, support and downloads.
Common problems, likely causes, and what to do.
| Problem | Possible cause | Remedy | |
|---|---|---|---|
| ●The remote control does not operate. | ●The AC power cord of the unit is not plugged in. ●The battery polarity is wrong. ●The batteries are dead. ●The distance or angle is incorrect. ●The remote control sensor receives strong light. | p.18 | |
| ● The radio makes unusual noises continuously. | ●The unit placed near a TV or computer. ●The FM/AM antenna is not placed properly. Move the antenna away from the AC power cord if it is located nearby. | p.18 | |
| ●No sound is heard. | ●The unit is too far from the Bluetooth audio source device. ●The unit is not paired with the Bluetooth audio source device. | p.18 | |
| ●Bluetooth sound is in- terrupted or distorted. | ●The unit is too near to a device that generates electromagnetic radiation. ●There is an obstacle between the unit and the Bluetooth audio source device. | p.18 | |
| ●Playback does not start. ●Playback stops in the middle or is not performed properly. | ●The disc is loaded upside down. ●The disc does not satisfy the standards. ●The disc is distorted or scratched. | p.19 | |
| ●Playback sounds are skipped, or stopped in the middle of a track. | ●The unit is located near excessive vibrations. ●Very dirty disc has been used. ●Condensation has formed inside the unit. | p.19 | |
| ●Device cannot be detected. ●Playback does not start. | ●There is no MP3 file inside the device. ●The device is not properly plugged in. ●An MTP device is plugged in. ●The device contains AAC file only. ●A copyright-protected or false MP3 file is being played back. | p.19 | |
| ●Wrong time display. ●Wrong file name display. | ●A Variable Bitrate files are being played back. ●The File Name was writ- ten in other than English characters. | p.19 |
Owners and our team usually reply within a day — and your question helps the next person too.
Be the first to ask — other owners or our team will answer.