Instruction/ maintenance manual of the product RDCSSAES Addonics
Go to page of 8
T E C H N O L O G I E S User Guide Rub y Dr iv e C ar tr idge S ystem (RDCSS AES / RDCSS AEU) www .addonics.com www .addonics.com T echnical Support If you need any assistance to get your unit functio.
www .addonics.com T echnical Support (M-F 8:30am - 6:0 0pm PST) Phone: 408-453-621 2 Email: www .addonics.com/support/query/ Enclosure Overview Step 1 Separate the top from the bottom cover of the drive enclosure by loosening the screw . Step 2 Align the SA T A connector in the 2.
www .addonics.com T echnical Support (M-F 8:30am - 6:0 0pm PST) Phone: 408-453-621 2 Email: www .addonics.com/support/query/ Step 4 T urn over the PCB and secure the hard drive to the PCB with the mounting screws that come with the kit. Step 5 Mount the board to the bottom cover .
www .addonics.com T echnical Support (M-F 8:30am - 6:0 0pm PST) Phone: 408-453-621 2 Email: www .addonics.com/support/query/ Ruby Enclosure Switch: INT : This mode is used when the enclosure is placed inside a drive cradle. For drive cartridge system kits, this is the mode used.
www .addonics.com T echnical Support (M-F 8:30am - 6:0 0pm PST) Phone: 408-453-621 2 Email: www .addonics.com/support/query/ Model: RDCSSAES *Note: The Ruby Drive Cartridge System with the SA T A interface must be connected to a SA T A controller with hot swap capability in order to add and remove drive cartridge without rebooting.
www .addonics.com T echnical Support (M-F 8:30am - 6:0 0pm PST) Phone: 408-453-621 2 Email: www .addonics.com/support/query/ Model: RDCSSAEU This Ruby model will hot-swap. Step 1 Connect the SA T A to USB2.0 converter to the SA T A interface of the cradle.
www .addonics.com T echnical Support (M-F 8:30am - 6:0 0pm PST) Phone: 408-453-621 2 Email: www .addonics.com/support/query/ Step 3 For data connection, you can either use the USB pin header cable to connect from the pin-header type USB connector on the converter to the USB pin-header on the motherboard.
www .addonics.com T echnical Support (M-F 8:30am - 6:0 0pm PST) Phone: 408-453-621 2 Email: www .addonics.com/support/query/ www .addonics.com Phone: 408-573-8580 Fax: 408-573-8588 Email: http://www .
An important point after buying a device Addonics RDCSSAES (or even before the purchase) is to read its user manual. We should do this for several simple reasons:
If you have not bought Addonics RDCSSAES yet, this is a good time to familiarize yourself with the basic data on the product. First of all view first pages of the manual, you can find above. You should find there the most important technical data Addonics RDCSSAES - thus you can check whether the hardware meets your expectations. When delving into next pages of the user manual, Addonics RDCSSAES you will learn all the available features of the product, as well as information on its operation. The information that you get Addonics RDCSSAES will certainly help you make a decision on the purchase.
If you already are a holder of Addonics RDCSSAES, but have not read the manual yet, you should do it for the reasons described above. You will learn then if you properly used the available features, and whether you have not made any mistakes, which can shorten the lifetime Addonics RDCSSAES.
However, one of the most important roles played by the user manual is to help in solving problems with Addonics RDCSSAES. Almost always you will find there Troubleshooting, which are the most frequently occurring failures and malfunctions of the device Addonics RDCSSAES along with tips on how to solve them. Even if you fail to solve the problem, the manual will show you a further procedure – contact to the customer service center or the nearest service center
