
Mounting The mic comes already mounted in a Mando Clip. Insert the clip into the widest part of the lower f-hole. The mic should be outside the f-hole. If your mandolin has a sound hole, clip the mic onto the sound hole.

Operation 1. If your mixer or instrument amp has phantom power, plug the mic connector into a mic cable that is connected to a mixer mic input or amp mic input.
If your mixer or amp does not have phantom power, plug the mic connector into a phantom power supply. Then connect the phantom supply output to a mixer mic input or amp mic input.
How to reduce feedback
Mix in the sound of a pickup. That increases the volume without increasing feedback.
If you have a pickup, send its signal to the monitor speakers, and send the mic signal to the house speakers. Here’s how: In your mixer’s pickup channel, turn up the monitor send and turn down the fader. In your mixer’s Mandolin Mic channel, turn down the monitor send and turn up the fader.
Use in-ear monitors.
Use a 1/3-octave graphic equalizer or a preamp with a feedback notch filter. Turn down frequencies that feed back.
Complete specifications are at www.bartlettaudio.com For free tech support, email info@bartlettaudio.com.
Pages referenced in this manual — manufacturer, support and downloads.
Owners and our team usually reply within a day — and your question helps the next person too.
Be the first to ask — other owners or our team will answer.