

APPEARANCE........................................................ 11
TECHNICAL CHARACTERISTICS.............................. 12
GETTING STARTED................................................. 13
Main menu overview 15
Working with On-Screen Keyboard 17
Inserting Micro SD Card 23

APPLICATIONS....................................................... 24
Interactive Apps 28
Changing Font Size 38
Closing a Book 44

Accounts and Synchronization 46
TROUBLESHOOTING................................................... 58
CUSTOMER SUPPORT................................................. 60
COMPLIANCE WITH INTERNATIONAL STANDARDS.... 61

Before start working with the Device, please, read this section
carefully. Following these instructions will help you ensure your
safety and extend service life of the Device.
Storage, Carriage and Usage Conditions
Device operating temperature range is 0°C to 40°C, so don’t ex
pose the Device to excessively high or low temperatures. Never
leave cables near heat sources. Heated cables or their insulation
may become deformed or damaged, which could lead to fire or
electric shock.
Try to avoid next impacts:
damp Strong electro magnetic fields
or smoke Liquids or

Do not leave the Device for a long time in poorly venti
lated environment, e.g. in a car or in closed tight boxes/
packaging.
Neither drop nor try to bend the Device.
Protect the screen from objects that may scratch or
damage it. To ensure adequate protection of the screen,
we recommend storing the Device in a protective and/or
hard cover.
Keep away from children.
Do not disassemble or modify the book reader.
Do not use the Device with a damaged battery or charger (bro
ken case, poor contact, broken feed cable). If the battery is dam
aged (cracked case, leakage of electrolyte, off-shape etc.) it should
be replaced by the authorized personnel. Usage of home-made
Maintenance

or modified batteries may cause an explosion and/or damage the
Device.
Do not use organic or inorganic solvents (e.g. benzoyl etc.) to
clean the screen/case.
Use a soft cloth to remove dust from the Device’s surface. Apply
a few drops of distilled water to remove dirt.
Up to five faulty pixels are acceptable in the screen and do not
constitute a warrantable defect of the screen.
avoid damage, make sure not to drop, bend, or apply pressure to
the device, do not allow point pressure on the screen surface and
any other actions that might break or damage the glass base. Also,
the screen does not have any special protective layer so please
avoid any contact between its surface and objects that might

leave marks or scratches on it. To decrease the risk of damaging
the device and its screen it is recommended to keep and transport
it in a Pocketbook protection cover.
If the device has not been used for a long time, the battery charge
indicator may not work when the charger is connected. In this
case, connect the charger, let the device charge for 1 hour, then
disconnect and reconnect the charging device or USB cable. The
device can then be used as normal.
By the end of product guarantee term, please contact the near
est authorized service facility for examination on the subject of
security is maintained.
For detailed information about service centres in your region
please visit the official website of PocketBook International: www.
pocketbook.ch.

Incorrect disposal of this Device may have adverse
impacts on the environment and public health. To
prevent such consequences follow the device-specific disposal
requirements. Recycling of these materials helps preserve natural
resources. For more information regarding recycling issues please
contact local municipal authorities, your domestic waste collec
tion service, store where you purchased the Device, or the author
ized service centre.
Disposal of electric and electronic components (the Directive is ap
plicable to the EU and other European countries where separate
waste disposal systems exist). In other countries dispose batteries
accordingly to local laws.
Do not destroy the battery by burning it to avoid the danger of
explosion.
Utilization


ize > Key mapping. Navigation and page turning buttons mapping depends
on screen orientation.

* The actual available internal storage size may vary depending on the software configuration of your device.
** Battery life and values mentioned above might vary depending on usage mode, connectivity and settings.

In this chapter you will learn how to prepare the Device to
work and about its main control features.
To extend battery lifetime, it’s recommended to charge the
Device for the first time from 8 to 12 hours.
You can charge the battery from (1) PC using USB-cable or
from (2) the power line using a charger (optional).

To charge the battery for the first time, do the following:
USB-cable. The device will turn on as soon as charging
starts.

nect the cable from the Device which is ready for usage.
If the Device is on when you connect the cable to PC, a
dialog window asking to select action – PC link or Charge –
will appear. Charging starts only if the appropriate mode
was selected.
Press On/Off button. When the Device is ready to operate, Main menu or last opened book will appear, depending on settings.
Press and hold On/Off button for about two seconds until the Device goes off.
You can lock your Device in three ways:
Unlock Press On/Off button.

In case if your Device ‘freezes’ (don’t respond to keys presses, you must give the device time (up to 30 seconds) to process commands. If it does not help, you can restart it by pressing On/Off button for 10 seconds.
Recent Events — list of last opened and downloaded books

Last down loaded books

NAVIGATION
Use navigation buttons Up, Down, Left, Right to select
required item (e.g. book or menu item).
page turning keys mapping will be also changed accordingly to the
side you’ve changed orientation to.
Press OK button shortly to open selected item. Continuous
OK press opens context menu of item, folder or application
(if available). If a menu item contains several level, you can
go over them by Left/Right buttons.
Page turning buttons Backward/Forward are used to
turn list pages. Continuous Backward/Forward keys press
turns 10 pages at once in lists and books. Short and contin
uous Backward button press returns to the previous menu
(or list’s page), closes an application, a context menu and
the Library (If you are on the first page).

Also you can configure key mapping to your own in Set
tings > Personalize > Key mapping section.
The on-screen keyboard appears when it is necessary to
enter some text info, for example, search query.
To navigate through the keyboard use the navigation keys
and OK button. To speed up keyboard operations all sym
bols are divided into 5 zones. The first navigation key press
transfers cursor to the middle of the selected zone, and
then you can select the required symbol in this zone. Press
OK button to type the selected symbol.


guage (up to 3 layouts) to the onscreen keyboard lay
out go to Settings > Languages > Keyboard Layouts.
As you type a password (e.g. Wi-Fi credentials) icon
will appear on a text field. Select icon and press OK to see
typed symbols.
This section displays last actions on the Device, namely last
opened and recently loaded books.
After you press OK on recently opened book title, it will be
opened on a page you’ve finished reading before.
After pressing OK on a message about recently added
books, Library will be opened displaying added books.
Books will be grouped by creation date.

LOADING FILES
Connect the Device to the PC using microUSB cable.
You will be prompted to select USB mode: PC Link or
Charge either. Select PC Link. Operating system of com
puter will detect Device’s storage as removable disk (if SD
card installed – as two ones). Now you can copy files to
the Device or SD card using Explorer or other file manager.
Downloading protected e-books (Adobe DRM)
Registration at www.adobe.com is required to use e-books
in protected format (Sign in > Create an Adobe Account).
Download via *.acsm
disconnect the cable!

index of products.
of the page to enter the library;
The file name should contain the name of the book and
the file extension .acsm. Click Save.
acsm will appear.
a protected book from any online bookstore.
support Flash Player

Do the following to open a protected (DRM) book on the
Device:
Device.
Device. To do this, use the on-screen keyboard to enter the
login and password of your account on www.adobe.com
into the Device Activation form. Then you will be able to
download the book.
plete, a full version of the book will be available for reading
in the Digital Edition folder.
The downloaded book is protected (DRM) and cannot be
opened by a non-registered user.
Download books via PC

be Digital Editions prompts you to activate the new device. Use
your registration data at www.adobe.com for this. If the Device is
not activated, it will be impossible to copy a book from PC to device
using Adobe Digital Editions.
To adjust the frontlight level, please use the Left/Right
button and move a Slider in the notification bar.

INSERTING MICRO SD CARD
The Device already has 8 GB of internal storage, but you
can extend it by using micro SD card (up to 32 GB). Insert
it to the slot, like it is shown on a figure, and slightly push
until card will be fixed.

To eject the card, slightly press on its edge until it will be
unfixed, and pull it to get.
yourself and immediately call Customer Support.

This section contains games and additional software.
Engineering calculator supports a wide range of mathemati
cal operations, such as different numeric systems, trigono
metric, logarithm, power and logical operations.
You can play versus your friend or the Device. If you are
playing against the Device, you can select 10 difficulty lev
els. Use the navigation keys to move cursor over the gam
ing board and OK to pick and put a piece.
After your start this application, the on-screen keyboard
will appear. Type the word you’d like to find, and ap
plication will find its entry in the dictionary. To change
Calculator · Chess · Dictionary

dictionaries, press Forward button twice, select the dic
tionary you need from the list and press OK.
After you close the on-screen keyboard (by pressing its keys
OK or Cancel), you will be able to view dictionary page-
by-page. To turn pages, use Left/Right keys. To bring up
the on-screen keyboard again, press OK. To exit dictionary,
press Backward button.
Classic solitaire.
This section opens in the mode of photo view (all photos
must be downloaded to the Photo folder). You can look
through images in JPG, BMP, PNG and TIFF formats.
The game. Use navigation keys to move the snake and
collect bugs. Beware of the walls and other snake!
Klondike · Gallery · Snake

Popular Japanese puzzle.
grid and bottom panel. Click OK button to enter. Back
ward/Forward buttons toggle between the grid and the
panel and vice versa.
can choose firstly a number or a cell, in which you want to
enter a number or a label.
Cell first:
bottom panel to choose correspondingly a number
(left) or labels (right) for the specified cell. Press ОК to
lected cell.
Sudoku · enter;

Number first:
in the beginning of the game) and on numbers of the bot
tom panel.
tom panel, showing that it is active.
lighted number in a cell.
one is chosen.
Bottom panel:
— Step Back (Cancel previous action);
— Step forward (active after “step back”);
— Clear cell.
— a hint by highlighting instances of the chosen numeral.
— hiding labels, which are not correct for a cell no more
— a hint about possible labels for a cell.

Library is e-books file manager, which allows to group, sort,
change appearance of the section and perform search.
Read more about this app at Library.
DropBox application allows to download files, added to
Dropbox from any computer or any Device with installed
Dropbox app or from the Dropbox website, to your Device.
And you do not need to install anything to your Pocket
Book, it is enough to authorize in the service.
How to start using
and password) on your PocketBook Device in the section
Settings > Accounts and Synchronization > Dropbox >
Library · Dropbox PocketBook

Login to authorize Dropbox. (The Wi-Fi connection should
be on, otherwise you will be asked to turn it on);
etBook sync folder will be created in the Library of the De
vice. The Application > Dropbox PocketBook directory will
show up in your Dropbox account, and after synchroniza
tion it will be available from other devices with Dropbox.
in the Application > Dropbox PocketBook folder on the server
Automatically:
box PocketBook on the server and to the sync folder on
your Device, will be automatically synchronized when the
internet connection is on.
sync folder in the Library (by default, Dropbox PocketBook
is the sync folder, but you can change it in Settings > Ac
counts and Synchronization > Dropbox > Sync folder).
How to synchronize

Manually:
tings choose ‘Accounts and Synchronization > Dropbox >
Synchronize files now’, or in the Library choose ‘Synchro
nize files now’ in the context menu of the sync folder.
available in the sync folder in the Library on the Device.
The application allows to send files to the email address of
your Device. Sent books will be automatically downloaded
to your Device, if the Wi-Fi is turned on.
How to start using
this purpose do the following:
tion > Send-to-PocketBook.
Send-to-PocketBook

asked to turn it on.
dress and password.
specified address. Follow this link to receive the email address
of your Device (for example, username@pbsync.com).
tion of the application, and the service address of the Device user
name@pbsync.com is used for sending books to it, if you want
them to be downloaded to your Device.
the Device. After that all applications features will be avail
able for you, and the download folder for received books
will be created in the library — Send to PocketBook.
How to get files

Automatically:
will be automatically downloaded to the download folder in
the Device Library, when the internet connection is on. Down
load folder is available after authorization from the locations:
to-PocketBook > Go to folder of the context menu of the
folder, but you can change it at registration or in the Set
tings > Accounts and synchronization > Send-to-Pocket
Book > Download folder section.
Manually:
To update the content of the download folder, in Settings
choose Accounts and synchronization > Send-to-Pocket
Book > Receive files now or in Library choose Receive files
now in the context menu of the download folder.
Download folder;

Received files will be also available in the download folder
in the Library of the Device.
The list of trusted senders
Documents can be downloaded on the Device, if they are
sent from the address, contained in the ‘white list’ (a list of
the trusted senders).
The address, specified at registration, is contained in the
list by default.
If the mail is sent to your Device from the unknown ad
dress, you will receive the letter with a proposal to add a
sender to the ‘white list’. After your confirmation you will
receive files from the added address to your Device. Thus,
spam won’t get on the Device.

In this chapter you will learn how to read e-books and con
figure reader software for the most comfortable reading.
The Device supports next book formats: PDF, PDF (DRM),
EPUB, EPUB (DRM), DJVU, FB2, FB2.ZIP, DOC, DOCX, RTF, PRC,
TXT, CHM, HTM, HTML, MOBI, ACSM.
To open a book, press OK on its title in Last events or
Library section. If you opened a book before, it will be
opened at the page you’ve finished reading.
Library is e-books file manager. To open a book, press
OK while its title is selected. Library menu allows to filter,
group, sort, change appearance of the section and per
form search.

Depending on selected criterion books are grouping by:
The results of grouping can be dispalyed as as
cending (A-Z) or descending (Z-A).

Simple – in this mode the cover icon of the book is displayed.
Detailed – in this mode there’s added author, titele,
thumbnails, information about file format and size, read
percentage.
List - in this mode next information is displayed:
Context menu, evoked by continuous pressing OK, allows
performing the following operations:

Context menu

Use Backward/Forward or Left/Right keys to turn pag
es. Continuous Backward/Forward keys press turns 10
pages at once.
If a page contains cross-references or footnotes, you can
enter links mode on continuous OK button press (otherwise
you’ll get a message informing that a page contains no links
to follow). A cursor will appear, and you will be able to select
a link using keys and press OK to follow.

CHANGING FONT SIZE
In text format books (ePub, FB2 etc., excluding PDF and
DjVu) you can change font size with Up/Down keys.
To access reader application menu press OK button.

Opens structured content of the book if present, otherwise
you’ll get message about missing table of contents. Active
contents display table of contents, bookmarks and notes
you’ve made during reading. If table of contents has more
than one level, higher level entry will be marked with ‘+’
Contents

sign. Expanded item is displayed with a sign ‘-‘. Buttons
Left/Right collapse/expand selected subsection branch.
Use navigation keys to move across the table, OK button
opens selected book chapter, continuous press of OK but
ton opens the context menu.
Using this menu you can open contents entry, edit or de
lete notes (text or graphic either) and bookmarks, expands/
collapses selected subsection branch. Under Settings sec
tion of the context menu you can configure which ele
ments to display:
If you want to open the exact page press Go to page, af
ter typing a page number exactly from on-screen keyboard
press OK. If you will exit the menu by pressing Backward,
you will stay on a page you was before.
Go to Page


Search mode works only in books containing text layer. To
search text through the book enter it using the on-screen
keyboard. Found text would be highlighted, and you can
switch between found instances using Left/Right naviga
tion keys. To exit search mode press Backward/Forward.
Adds current page to bookmarks. After adding a page to
bookmarks in a right top corner a bookmark will appear.
All the bookmarks will be displayed in contents. To delete
bookmark, select the correspondent menu item again.
Search · Bookmarks

In this section you can find out how to configure your read
ing settings for different book formats. You can also learn
about all the available options and features in this menu.
EPUB, FB2, etc.
To configure EPUB, TXT, FB2, DOC and other text format
books, open the Reading menu and select Settings.
Page tab - you can choose
line spacing, font size, margins
width and also enable or disable
hyphenation.
Font tab - use this tab to select
font style.
Screen tab - you can enable or dis
able page numbering and on\off
Status bar.
Settings

Built-in page numbering displays the number of pages in
the book’s original layout. One page can cover one or sev
eral screens, depending on reading settings.
If the function is disabled, the numbering will display the
number of screens. It may take a while to calculate the
number of screens when you first open the book, or after
the reading settings have been changed. The number of
screens won’t be calculated again whenever the book is
opened after this.
PDF and DjVu books has Settings. Select viewing mode us
ing Left/Right keys. Following modes are available:
width or heigth. Define a border, you want to crop by a
joystick and press OK. Move arrow buttons by a joystick
to set margins width and heigth. After selecting cropping
area choose Accept. Then define cropping settings: whole
document, odd pages, even pages or current page only.
Confirm your choice by clicking Accept.
PDF and DjVu

navigate the page use navigation buttons. A page will be
turned after bottom edge of the sheet reached
completely on a page. You can change font size with Up and
Down keys. Some images and tables may not display in this
mode. Reflow mode is supported for PDF books only. Some
tables and pictures cannot be displayed in the Reflow mode.
Single-word translation. By default cursor highlights the
word to translate and dictionary looks for translation
automatically. OK button press switches to a toolbar.

Change dictionary View resembling words
On-screen keyboard to type word to translate
Dictionary · Word translation · Back to text

navigation keys.
You can enter notes mode by pressing Down button con
tinuously or by pressing the corresponding menu option.
On the top of the display separate area will appear. Use the
buttons Up, Down to choose the place where your note
will begin and press OK to set up the top margin of the
and press OK to set the bottom margin of the note. You
can look through the notes by choosing Notes section in
the main menu. By pressing OK button on the note, you
can switch to the initial page, where it was created.
To close a book, select the corresponding reading menu
item.
Rotate

In this chapter you will learn how configure the interface and
software features of the Device for the most comfortable
usage. Select Settings at Main menu panel to configure the
Device. All changes will be applied after exiting the section.
In this section you can set parameters needed for network
connection.
Network access — on or off. After network access
activation, the following settings appear:
the Connecting to the Internet section of this manual.
Choose one of them and you’ll see parameters of this
IP-address, network mask, main gateway, DNS.
means that Device is searching for available networks.

ACCOUNTS AND SYNCHRONIZATION
To authorize, input your Login (e-mail address) and Pass
word. When you are authorized, your login and Exit from
Adobe DRM item are displayed. After exit all protected
DRM documents will be unavailable.
Send-to-PocketBook — the following options are
available:
application, input your contact email address and pass
word, to authorize. If you are authorized, the email, to
which you can send books, is displayed. You can logout
Send-to-PocketBook.
folder will be updated. Before update, please, check if your
Device is connected to the Internet.
to the Device address username@pbsync.com, will be
Adobe DRM

automatically updated in the download folder, if Wi-Fi con
nection is on. You can turn off automatic receiving files to
optimize the Device productivity.
Send-to-PocketBook folder is set by default. You can
choose any other folder or create a new one in the internal
Device storage or on the external SD-card.
Dropbox — In this section the following options are
available:
plication, input your Dropbox account data to authorize. If
you are authorized, then you can logout Dropbox.
Pocketbook device directory will be synced. Before syncing
files, please check if your Device is connected to the Inter
net and is linked to the proper Dropbox account
The service is turned on automatically at the authorization,

so Dropbox will automatically sync files, if Wi-Fi connec
tion is on. You can turn off autosync to optimize the Device
productivity.
move files to Sync folder, if you want to sync them with
Dropbox Pocketbook directory on the server. The Dropbox
PocketBook folder on the Device is set by default. You can
choose another folder or create a new one in the internal
Device storage or on the external SD-card.
Power-off Logo — the image will be displayed when the
Device is off. You can set a cover of the last opened book
by setting book cover.
application. Read about it in the Gallery section.

Complete Page Refresh. Select the amount of page turned
before the screen will be updated completely. Always item
provides the best quality, but consumes the most power.
Less frequency may cause some artifacts from previous
pages on a screen.
Open at Startup last opened book or main menu.
LED Indication – you can turn on or turn off LED indicator.
Key Mapping. In this section you can remap hardware
keys. To change key action, select it from the list and select
action from the list.
User Profiles - can be configured on bith internal storage and
microSD card; number of profiles is not limited. Each profile
stores individual books’ status, last opened books, bookmarks,
To add new profile, open the corresponding item. You will be
suggested to set destination (local memory or SD card) and to
enter the name from on-screen keyboard. After this current
above-mentioned parameters will be stored at this profile.

To activate profile open the one you need. In profile context
menu you can change avatar, rename or delete profile.
Language. Select the Device’s interface language.
Keyboard Layouts. Under this section you can add up to
3 keyboard layouts.
Available Dictionaries. Under this section you can un
check dictionaries you don’t want to be displayed in the
list during the translation or in Dictionary application.
In this section you will be able to set date, time, time zone
and clock format. You can also Synchronize Time or set
Auto Time Sync to use the network time/date.

SAVING POWER
Here you can see battery level and set parameters, which
help to save battery charge:
which the Device is locked: off, 5 min, 10 min.
which the Device power off: off, 10, 20, 30 or 60 minutes.
USB Mode — set how the Device handles USB connection
by default: PC link, Charge or Ask when connected.
file to restore from a list;
ate a backup folder on an external microSD-card and will
Backup & Recovery

save there system settings. You will be suggested to enter
the file name from on-screen keyboard;
tion you can protect your setting by password. Select Set
Password section and type the password from on-screen
keyboard. Now each time you try to enter Settings section,
you will be asked to enter the password. You can remove or
change password by selecting the corresponding item. To
proceed, you will be asked to enter the password once more.
to PocketBook about some actions, performed by a user
on the Device for the further improvement of the Device
and services to users. The serial number and any other in
formation for identifying a user isn’t saved. You can disable
this option of statistics gathering in the Diagnostic and Us
age section.
Format Internal Memory – this action will erase all data,
except system files.
Privacy

feature only, don’t try to format the Device internal memory via PC.
Format SD card – this action will erase all data from the
external microSD card.
Factory Reset – the Device state will be reset to factory
default settings, erasing user settings. Other data (e.g.
books, photos) won’t be lost;
Demo mode - switching demo mode for the Device. To acti
vate demonstration mode check On in the Demo mode item.
Software Version - the current version of firmware is dis
Software Update – the Device will search for updates in
storage and Internet.
Auto Update – turn on/off automatic check for updates.
played;

Third-Party Apps — license and information about third-
party applications, used on the Device.
The following information about Device will be displayed:
Device Model (model, serial number, hardware platform);
Memory (operative memory, total and available internal
License - license and information about applications, used
on the Device.
memory and microSD-card);

agement software of the Device will be changed. In case of improper execu
tion control program may be damaged and will require treatment in the service
centre. Please perform the upgrade procedure in accordance with the instruc
tions below.
There are two ways to update the firmware.
To start automatic software update select Settings > Soft
ware > Software Update. The Device will begin to check
available update sources in the following order:
If default Internet connection is not set, the Device will ask
to connect to one of available wireless networks.
Automatic Update

Also you can activate the automatic updates check (Set
tings > Software > Auto Update). In this case, the Device
will use Wi-Fi connection only.
Select your country.
ware model of your Device
BIN, and copy it to the root folder of MicroSD-Card or in
both Backward and Forward buttons until the message
Firmware update… is displayed on the screen.
ware Version · Manual Update · ternal Device storage

a higher priority in comparison with the file stored in the Device’s
root folder during the update process.
Error Message Reason Correction Method
Try to format your Micro SD card (make a backup copies of all its content prior to formatting) and copy the file to the root of the empty card. If this error persists, use another card.
File SWUPDATE.BIN cannot be found on the microSD card. Make sure the file is in the root folder of the card.
No upgrade image found
Delete some files from your card and copy SWUPDATE. BIN file on it one more time. Repeat the download from www.pocketbook-int.com If this error repeats, use other card.
SWUPDATE.BIN file is damaged or there is no space available on the microSD card.
Upgrade image is corrupted or Image is empty
File read error MicroSD card error Try to use another MicroSD card
Error. A different firmware version is installed on the device
A firmware file of an older version is stored in the device internal memory.
Delete the old version of the firmware file from the Device’s internal memory root folder
Troubleshooting

Malfunciton Possible Reason Solution Device does not turn on or turns on but only the logo is loaded
Battery is low Charge the battery
If the book was downloaded from the online store try to re- load it again. If the file opens on your PC, but does not open on the Device, save the book in another format (TXT, DOC, PDF).
A book does not open — the message Book is probably damaged or protected appears, or nothing happens at all
The book is damaged
Html book opens but is displayed incorrectly. For example, there are empty pages, some part of the text is missing etc.
HTML-files contain non-text elements (frames, JAVA-scripts, flash-elements)
Save the page in TXT format
Book opens but various symbols, question marks etc. are displayed instead of letters
Switch to reading mode, select Settings and change encoding
Sometimes (e.g., when downloading damaged or too large books) the Device may freeze
No response when you press any key
Close the frozen application by pressing / keys simul taneously for 1–2 sec.
Check USB mode in Set tings Main Menu item. Set Connection to PC or Ask at Connection
Your Device is in the bat tery charging mode.
After connection to PC disks are not displayed in Explorer
Check USB cable condition and its proper connection to connector. Try to connect the USB-cable to another port
No signal in connection cable
Incorrect encoding

Malfunciton Possible Reason Solution
Connect the device to a PC and check disks. To proceed, open My Computer, right-click on the selected disk and select Properties > Service > Check Disk
Bookmarks, settings and current position in file cannot be saved
Delete books, images and/ or music files that you do not need
Internal memory is full
Settings > Date/Time in Main Menu. Select automatic turn off time in Auto Turn Off in… item
Battery discharges too fast
Disabled automatic turning off
File system damaged

For detailed information about service centers in your
country please use contacts below:
www.pocketbook-int.com/support/
help@pocketbook-int.com

The EUT should be supplied by USB port from complied Limited
Power Source of personal computer or notebook.
The EUT should be supplied by Adapter from complied Limited
Power Source.
Rated output voltage: DC 5V 1A.
This equipment is marked with the symbol and can be used
throughout the European community. This indicates compliance
with the R&TTE Directive 1999/5/EC. France – 2.4GHz for Metro
politan France. In all Metropolitan departments, wireless LAN
frequencies can be used under the following conditions, either
for public or private use:
entire 2400-2483.5 MHz frequency band

2400-2454 MHz band and with maximum power (EIRP*) of 10
mW for the 2454-2483 MHz band.
thorized could void the EMC and wireless compliance and negate
your authority to operate the product. This product has demon
strated EMC compliance under conditions that included the use of
compliant peripheral devices and shielded cables between system
components. It is important that you use compliant peripheral de
vices and shielded cables between system components to reduce
the possibility of causing interference to radios, televisions, and
other electronic devices.
The device meets guidelines for exposure to radio waves.
Your device is a radio transmitter and receiver. It is designed not
to exceed the limits for exposure to radio waves recommended
by international guidelines. These guidelines were developed
by the independent scientific organization ICNIRP and include
safety margins designed to assure the protection of all persons,
Certification information (SAR)

regardless of age and health. The exposure guidelines for devices
employ a unit of measurement known as the Specific Absorp
tion Rate or SAR. The SAR limit stated in the ICNIRP guidelines
is 2.0 watts/kilogram (W/kg) averaged over 10 grams of tissue.
Tests for SAR are conducted using standard operating positions
with the device transmitting at its highest certified power level in
all tested frequency bands. The actual SAR level of an operating
device can be below the maximum value because the device is
designed to use only the power required to reach the network.
This equipment complies with the European Council Recommen
dation of 12 July 1999 on the Limitation of Exposure of the Gen
eral Public to Electromagnetic Fields [1999/519/EC].
Crocicchio Cortogna, 6, 6900, Lugano, Switzerland
Tel. 0 800 187 3003
Contains Reader® Mobile technology
by Adobe Systems Incorporated
Pocketbook International SA · Made in China
Pages referenced in this manual — manufacturer, support and downloads.
Owners and our team usually reply within a day — and your question helps the next person too.
Be the first to ask — other owners or our team will answer.