


& Dimmable
LED Drivers




ERP designs and manufactures energy-efficient LED drivers/power supplies for a wide range of lighting
lighting. Small, yet powerful, ERP products deliver an industry-leading combination of compact size,
extensive dimmer compatibility, and high efficiency at competitive cost. Headquartered in Moorpark, CA,
ERP owns and operates its own ISO 9001 certified manufacturing facility to ensure quality of design,
sourcing, production and testing.
Our Presence


ERP products are manufactured in our wholly owned manufacturing facility in Zhuhai, China. The factory is configured
with high-speed production lines for LED drivers and high-density power supplies, as well as state of the art burn-in
chambers and automated test equipment. Strategic manufacturing partners provide significant upside capabilities. ERP
products go through 100% burn-in to eliminate “infant mortality” failures. ISO 9001:2008 certified, with regular audits by
safety agencies.



Quality Management Systems (QMS)
Standard Certifications
standards for lighting applications, and carry
certifications by safety agencies such as UL, CSA
and Nemko.
from Europe, and FCC/ICES in North America.
PQA SQA
IQC

Forward-phase (TRIAC or leading-edge) and reverse-phase (ELV or trailing-edge)
Forward (TRIAC) Phase Control
Reverse (ELV) Phase Control
Light Output (% of max output)
0-10V Signal Voltage 0 1 2 3 4 5 6 7 8 9 10 11
ERP LED Driver w/ Tri-Mode
of LED drivers are compatible with Tri-Mode
Dimming™ from 6 W up to 160 W, i.e. they
are compatible with forward-phase (TRIAC
Dimming™
or leading-edge), reverse-phase (ELV or
trailing-edge) and 0-10 V dimmers.
ERP LED drivers deliver an extensive dimmer compatibility. For each LED driver, a dimming compatibility
matrix is available upon request, showing how the LED driver scores against a long list of dimmers according
to several criteria such as: flicker, shimmer, smooth dimming, no flash at startup, etc.
Highest Power Density in the industry
The new patent-pending power electronics design delivers more than double the density of the previous
generation ERP platform, while delivering 5 times the power density of current industry competitors.



ERP has developed an extensive cross-reference for 12 different LED manufacturers. This cross-reference can be
directly accessed from the ERP website at www.erp-power.com. On the homepage, using the pull-down menus,
select the LED manufacturer and then the LED. You may also select your desired drive current. The cross-reference
tool will return a list of driver(s) that are the most relevant for your LED selection. You can also access the cross-
reference by clicking on LED GUIDE at the top of the homepage. The LED guide lists the 12 LED manufacturers
whose LEDs have been cross referenced to some of our LED drivers.


Below are two graphs that illustrate our portfolio of constant current and constant voltage LED drivers. ERP LED drivers
are targeted at architectural, commercial and industrial applications requiring 10 W to 260 W of power with dimming,
programming and connectivity to the Internet of Lights. The color coded drivers are represented in this brochure.
15-50 W (DALI Dimming)
PSB / PHB Series
PDB / PMB Series
30-65 W (Programmable 0-10 V Dimming)
30-50 W (Programmable 0-10 V Dimming)
Dimming Types:
ESP / ESPT Series
ESS / ESST Series
Phase & 0-10 V)
SLM Series (Grow, Street Lights)
TLM Series (Theatrical Lighting)
0.01-100% Dimming Range; AUX Output)
6 10 15 20 30 40 50 60 70 80 90 120 150 160 220 260
VZM100
60 W Broomstick Case 0-10 V Dimming
90 W Broomstick Case 0-10 V Dimming
VLM100
VLB260
60/40 W Broomstick Case
96 W Broomstick Case
L 217/240.5 x W 50.8 x H 38.5 mm
JVLM100
60 W Enclosed in Junction Box (Aluminum Case with Flying Leads)
96 W Enclosed in Junction Box (Aluminum Case with Flying Leads)
VGM100
60 W 6kV Surge, IP66 Signage
96 W 6kV Surge, IP66 Signage
VIM100
60 W with AC and DC Connectors
96 W with AC and DC Connectors
6 10 15 20 30 40 50 60 70 80 90 120 150 160 220 260


Programmable, Constant Current, Class 2 / Class II LED Drivers with Tri-Mode Dimming™ (TRIAC, ELV and 0-10 V)


Side Leads PSBXXW Models L 98.5 x W 26.0 x H 21.85 mm

L 98.5 x W 26.0 x H 23.7 mm (L 3.88 x W 1.02 x H 0.93 in.)

L 154.2 x W 26.2 x H 21.85 mm


High Performance, Programmable, Constant Current, Class 2 / Class II LED Drivers with Tri-Mode Dimming™ (TRIAC, ELV and 0-10 V)


L 103.5 x W 26.2 x H 23.85 mm



Programmable, Constant Current, Class 2 LED Drivers with Tri-Mode Dimming™ (TRIAC, ELV & 0-10 V)



Side Leads L 70 x W 40 x H 29.5 mm (L 2.76 x W 1.57 x H 1.16 in.)






Terminal Blocks, Aluminum Case
L 132.2 x W 30.6 x H 20.7 mm





Side Leads L 103.5 x W 27.3 x H 22.65 mm



Power Efficiency Max. Case Temperature THD Power Factor Dimming Method Dimming Range Startup Time
120 & 277 Vac 65 W 86% typical 90°C (measured at the hot spot) < 20% > 0.9 Programmable 0-10 V 1-100% (% of Iout) 300 ms typical


PKB30W-1050-55-TD 120 & 277 30 275 to 1050 10 49.5 55 60
PKB50W-1400-55-TD 120 & 277 50 455 to 1400 10 49.5 55 60
PKB65W-1800-55-TD 120 & 277 65 591 to 1800 10 49.5 55 60
For additional options of output current and output voltage, contact your sales representative or send an email to: SaveEnergy@ERP-Power.com

Terminal Blocks, Aluminum Case
L 257 x W 29.4 x H 25.1 mm (L 10.12 x W 1.16 x H 0.99 in.)

Nominal Input · Voltage


Power Efficiency Max. Case Temperature THD Power Factor Dimming Method Dimming Range Startup Time
120 & 277 Vac 50 W 86% typical 90°C (measured at the hot spot) < 20% > 0.9 Programmable 0-10 V 1-100% (% of Iout) 300 ms typical


PKM30W-1050-55-SD 120 & 277 30 275 to 1050 10 49.5 55 60
PKM30W-1050-55-TD 120 & 277 30 275 to 1050 10 49.5 55 60
PKM50W-1400-55-SD 120 & 277 50 455 to 1400 10 49.5 55 60
PKM50W-1400-55-TD 120 & 277 50 455 to 1400 10 49.5 55 60
For additional options of output current and output voltage, contact your sales representative or send an email to: SaveEnergy@ERP-Power.com

L 106.5 x W 60.3 x H 25.5 mm
L 106.7 x W 60.3 x H 25.2 mm

Nominal Input · Voltage

ERP Part Number Nominal Input Voltage (Vac)
Nominal Input Voltage Max. Output
Output Voltage Output Current Efficiency
min. max.
120 & 277 Vac, 220 to 240 Vac 40 W 6 to 56 Vdc 180 mA to 2.1 A Constant Current
ESS010W: up to 10 W ESS010W-0180-42 120 & 277 180 7.6 24 42 ESS010W-0200-42 120 & 277 200 8.4 24 42 ESS010W-0250-42 120 & 277 250 10.5 24 42 ESS010W-0250-42-Z1
Max. Case Temperature THD Power Factor Dimming Method Dimming
[2] 120 & 277 250 10.5 24 42 ESS010W-0350-24 120 & 277 350 8.4 14 24 ESS010W-0500-12 120 & 277 500 6.0 6 12 ESS010W-0500-18 120 & 277 500 9.0 10 18 ESS010W-0750-12 120 & 277 750 9.0 6 12 ESS015W: 11 to 15 W ESS015W-0300-42 120 & 277 300 12.6 24 42 ESS015W-0350-32 120 & 277 350 11.2 21 32 ESS015W-0400-32 120 & 277 400 12.8 21 32 ESS015W-0350-42 120 & 277 350 14.7 24 42 ESS015W-0350-42-Z1
90°C (measured at the hot spot) < 20% > 0.9 Forward-Phase, Reverse-Phase, & 0-10 V
1-100% (% of Iout) 400 ms
[2] 120 & 277 350 14.7 24 42 ESS015W-0440-25 120 & 277 440 11.0 19 25 ESS015W-0440-34 120 & 277 440 15.0 24 34 ESS015W-0700-18 120 & 277 700 12.6 10 18 ESS015W-0700-18-Z1
[2] 120 & 277 700 12.6 10 18 ESS015W-1000-12 120 & 277 1000 12.0 6 12 ESS015W-1050-14 120 & 277 1050 14.7 8 14
[2] 120 & 277 1050 14.7 8 14
ESS020W: 16 to 20 W ESS020W-0350-56 120 & 277 350 19.6 40 56 ESS020W-0400-42 120 & 277 400 16.8 24 42 ESS020W-0450-42 120 & 277 450 18.9 24 42 ESS020W-0500-32 120 & 277 500 16.0 21 32 ESS020W-0500-34 120 & 277 500 17.0 24 34 ESS020W-0700-24 120 & 277 700 16.8 14 24 ESS020W-1400-14 120 & 277 1400 19.6 8 14
ESS Plastic Case L 84 x W 40 x H 25 mm (L 3.30 x W 1.57 x H 0.99 in.)
ESST Thermally Enhanced Plastic Case (ESST040 ONLY)
L 84 x W 40 x H 27 mm (L 3.30 x W 1.57 x H 1.06 in.)

[2] 120 & 277 1400 19.6 8 14

[2] 120 & 277 500 21.0 24 42 ESS030W-0550-42 120 & 277 550 23.1 24 42 ESS030W-0550-42-Y1
[1] 120 & 277 550 23.1 24 42 ESS030W-0620-42 120 & 277 620 26.0 24 42 ESS030W-0700-32 120 & 277 700 22.4 21 32 ESS030W-0700-42 120 & 277 700 29.4 24 42 ESS030W-0700-42-Z1
[2] 120 & 277 700 29.4 24 42 ESS030W-0900-27 120 & 277 900 24.3 20 27 ESS030W-0900-32 120 & 277 900 28.8 21 32 ESS030W-1050-21 120 & 277 1050 22.1 14 21 ESS030W-1100-27 120 & 277 1100 29.7 20 27 ESS030W-1750-14 120 & 277 1750 24.5 8 14 ESS030W-1750-14-Z1
[2] 120 & 277 1750 24.5 8 14 ESST040W: 31 to 40 W ESST040W-0800-42 120 & 277 800 33.6 24 42 ESST040W-0900-42 120 & 277 900 37.8 24 42 ESST040W-1400-24 120 & 277 1400 33.6 14 24 ESST040W-1400-27 120 & 277 1400 37.8 20 27 220 TO 240 VAC NOMINAL INPUT VOLTAGE ESS010E: up to 10 W ESS010E-0250-42 220 to 240 250 10.5 24 42 ESS015E: 11 to 15 W ESS015E-0350-42 220 to 240 350 14.7 24 42 ESS030E: 21 to 30 W ESS030E-0500-42 220 to 240 500 21.0 24 42 ESS030E-0700-42 220 to 240 700 29.4 24 42 ESST040E: 31 to 40 W ESST040E-0900-42 220 to 240 900 37.8 24 42



Output Voltage Output Current Efficiency Max. Case Temperature THD Power Factor Dimming Method Dimming
120 & 277 Vac 40 W 20 to 42 Vdc
90°C (measured at the hot spot) < 20% > 0.9


For additional options of output current and output voltage, contact your sales representative or send an email to: SaveEnergy@ERP-Power.com

Plastic Case L 84 x W 40 x H 27 mm (L 3.30 x W 1.57 x H 1.06 in.)


Constant Current LED Drivers with Deep TRIAC and ELV Dimming (1 - 100%) and with Fast Startup Time
Output Voltage Output Current Efficiency Max. Case Temperature THD Power Factor Dimming
120 Vac, 220 to 240 Vac 21 W 16 to 42 Vdc 200 to 700 mA Constant Current
< 20% > 0.9 Forward-Phase,
1-100% (% of Iout) 200 ms



For additional options of output current and output voltage, contact your sales representative or send an email to: SaveEnergy@ERP-Power.com


Output Voltage Output Current Efficiency Max. Case Temperature THD Power Factor Dimming Method Dimming
120 & 277 Vac 60 W 8 to 56 Vdc
280 mA to 1.4 A Constant Current
90°C (measured at the hot spot) < 20% > 0.9 Forward-Phase, Reverse-Phase, & 0-10 V
1-100% (% of Iout) 400 ms



Metal Case L 110 x W 60 x H 26 mm (L 4.33 x W 2.36 x H 1.02 in.)
For additional options of output current and output voltage, contact your sales representative or send an email to: SaveEnergy@ERP-Power.com 5



Nominal Input Voltage Max. Output
Power Output Voltage Output Current Efficiency Max. Case Temperature THD Power Factor Dimming Method Dimming
120 & 277 Vac 100 W 30 to 48 Vdc 1.4 to 2.35 A Constant Current
90°C (measured at the hot spot) < 20% > 0.9
1-100% (% of Iout) 400 ms


Metal Case L 144 x W 70 x H 40 mm (L 5.67 x W 2.76 x H 1.57 in.)

For additional options of output current and output voltage, contact your sales representative or send an email to: SaveEnergy@ERP-Power.com



Nominal Input Voltage Max. Output
Output Voltage Output Current Efficiency Max. Case Temperature THD Power Factor
120 & 277 Vac, 220 to 240 Vac 60 W 21 to 56 Vdc 700 mA to 1.4 A Constant Current
90°C (measured at the hot spot) < 20% > 0.9
1-100% (% of Iout) 400 ms
min. max.

ESP040W-0800-42 120 & 277 800 33.6 24 42
ESP040W-0850-42 120 & 277 850 35.7 24 42
ESP040W-0900-42 120 & 277 900 37.8 24 42
ESP040W-0940-33-SS-F1
[1] 120 & 277 940 31.0 28 33
ESP050W-1200-42 120 & 277 1200 50.4 24 42
ESP050W-1400-32 120 & 277 1400 44.8 21 32
ESP050W-1400-34 120 & 277 1400 47.6 23 34

Plastic Case L 90 x W 60 x H 27.2 mm (L 3.54 x W 2.36 x H 1.07 in.)
ESP040E-0850-42 220 to 240 850 35.7 24 42
ESP060E-1400-42 220 to 240 1400 58.8 24 42
For additional options of output current and output voltage, contact your sales representative or send an email to: SaveEnergy@ERP-Power.com



Nominal Input Voltage Max. Output
Output Voltage Output Current Efficiency Max. Case Temperature THD Power Factor
120 & 277 Vac 60 W 24 to 56 Vdc 700 mA to 1.4 A Constant Current
90°C (measured at the hot spot) < 20% > 0.9
1-100% (% of Iout) 400 ms
min. max.

[1] 120 & 277 1050 44.1 24 42
[1] 120 & 277 1200 50.4 24 42
[1] 120 & 277 1400 58.8 24 42

Plastic Case L 87 x W 60 x H 30 mm (L 3.43 x W 2.36 x H 1.18 in.)
For additional options of output current and output voltage, contact your sales representative or send an email to: SaveEnergy@ERP-Power.com



Tri-Mode Dimming™ (TRIAC, ELV & 0-10 V) High Power, Constant Current LED Drivers with 1-100% Dimming Range and with 12 V / 100 mA Auxiliary Output
Output Voltage Output Current Efficiency Max. Case Temperature THD Power Factor Dimming Method Dimming
120 & 277 Vac 160 W 30 to 56 Vdc 1.7 to 2.8 A Constant Current
90°C (measured at the hot spot) < 20% > 0.9
1-100% (% of Iout) 0.75 sec


Forced air cooling or heatsink base plate (aluminum baseplate: 210 mm x 200 mm x 2 mm) is required for total continuous power exceeding 120 W.
For additional options of output current and output voltage, contact your sales representative or send an email to: SaveEnergy@ERP-Power.com
Aluminum Case L 101.6 x W 50.8 x H 38.5 mm







Tri-Mode Dimming™ (TRIAC, ELV & 0-10 V) High Power, Constant Current LED Drivers with 0.01-100% Dimming Range and 12 V / 100 mA Auxiliary Output
Output Voltage Output Current Efficiency Max. Case Temperature THD Power Factor Dimming Method Dimming Range
120 & 277 Vac 90 W 30 to 42 Vdc 2.1 A Constant Current
90°C (measured at the hot spot) < 20% > 0.9
0.01-100% (% of Iout)


For additional options of output current and output voltage, contact your sales representative or send an email to: SaveEnergy@ERP-Power.com
Aluminum Case L 101.6 x W 50.8 x H 38.5 mm





Output Voltage Output Current Efficiency Max. Case Temperature THD Power Factor Dimming Method Dimming Range
120 & 277 Vac 260 W 114 to 400 Vdc
325 mA to 1700 mA Constant Current
90°C (measured at the hot spot) < 20% > 0.9 0-10 V 1-100% (% of Iout)


PDB260W-0860-400 120 & 277 260.0 430 to 860 234 to 300 325 to 650 312 to 400
PDB260W-1300-280 120 & 277 260.0 650 to 1300 156 to 200 465 to 930 218 to 280
PDB260W-1700-210 120 & 277 260.0 850 to 1700 117 to 150 620 to 1240 164 to 210
For additional options of output current and output voltage, contact your sales representative or send an email to: SaveEnergy@ERP-Power.com

Aluminum Case L 214.4/240 x W 50.8 x H 38.5 mm


surge is available upon request) • 2.5 kV ring wave: ANSI/IEEE c62.41.1-2002 & c62.41.2-2002 category A
Power · up to 93% · typical


Programmable, Constant Current LED Drivers with 0-10 V Dimming & Integrated Bluetooth® Mesh
Power Output Voltage Output Current Efficiency Max. Case Temperature THD Power Factor Dimming Method Dimming Range
120 & 277 Vac 260 W 114 to 400 Vdc 325 mA to 1700 mA Constant Current up to 93% typical 90°C (measured at the hot spot) < 20% > 0.9 0-10 V 1-100% (% of Iout)
(mA) Vout 2 (Vdc)

CDB260W-0860-400 120 & 277 260.0 430 to 860 234 to 300 325 to 650 312 to 400
CDB260W-1300-280 120 & 277 260.0 650 to 1300 156 to 200 465 to 930 218 to 280
CDB260W-1700-210 120 & 277 260.0 850 to 1700 117 to 150 620 to 1240 164 to 210
For additional options of output current and output voltage, contact your sales representative or send an email to: SaveEnergy@ERP-Power.com
Aluminum Case L 214.4/240 x W 50.8 x H 38.5 mm



Nominal Input Voltage Max. Output Power Nominal Output Voltage Max. Output Current Efficiency Max. Case Temperature THD Power Factor
120 & 277 Vac, 220 to 240 Vac 60 W 12, 24, 48 Vdc 5, 2.5, 1.25 A up to 90% typical 90°C (measured at the hot spot) < 20% > 0.9

L 130 x W 19.65 x H 19.8 mm
Models with “-S” Suffix Bottom Leads with Studs, Aluminum Case
L 130 x W 19.65 x H 23.85 mm
Aluminum case L 183.2 x W 19.9 x H 19.85 mm
Suffix for the different mounting options: a) NO suffix: side leads b) “-T”: Terminal blocks c) ”-S”: Bottom lead exit with studs
For additional options of output current and output voltage, contact your sales representative or send an email to: SaveEnergy@ERP-Power.com



Nominal Input Voltage Max. Output Power Nominal Output Voltage Max. Output Current Efficiency Max. Case Temperature THD Power Factor
120 & 277 Vac, 220 to 240 Vac 96 W 12, 24, 48 Vdc 8, 4, 2 A up to 92% typical 90°C (measured at the hot spot) < 20% > 0.9



Models with Flying Leads, Aluminum Case (VLM100W Models)

L 137 x W 26 x H 19.8 mm (L 5.39 x W 1.02 x H 0.77 in.)
Models with “-S” Suffix Bottom Leads with Studs, Aluminum Case
Suffix for the different mounting options: a) NO suffix: side leads b) “-T”: Terminal blocks c) ”-S”: Bottom lead exit with studs
L 137 x W 26.0 x H 23.85 mm
For additional options of output current and output voltage, contact your sales representative or send an email to: SaveEnergy@ERP-Power.com

Models with “-T” Suffix (Terminal Blocks)
Aluminum case L 193.2 x W 26.2 x H 19.85 mm



Nominal Input Voltage Max. Output Power Nominal Output Voltage Max. Output Current Efficiency Max. Case Temperature THD Power Factor
120 & 277 Vac 96 W 12, 24, 48 Vdc 5, 4, 2 A up to 92% typical 90°C (measured at the hot spot) < 20% > 0.9


Models contain the VLM LED Driver in the aluminum case with flying leads.
For additional options of output current and output voltage, contact your sales representative or send an email to: SaveEnergy@ERP-Power.com


Dimensions L 207.2 x W 75.4 x H 33 mm (L 8.16 x W 2.97 x H 1.30 in.)
wiring enable maximum wiring flexibility
VLM Driver Included


Efficient, Compact, Constant Voltage, Class 2 / Class II LED Drivers with 0-10 V Dimming
Nominal Input Voltage Max. Output
Current Efficiency Max. Case Temperature THD Power Factor
120 & 277 Vac 90 W 24, 48 Vdc 3.75, 1.9 A up to 90%
90°C (measured at the hot spot) < 20% > 0.9 Programmable
0-10 V 1-100% 300 ms typical


For additional options of output current and output voltage, contact your sales representative or send an email to: SaveEnergy@ERP-Power.com

Models with Flying Leads,
VZM100 L 150.2 x W 38.8 x H 24.9 mm
VZM060 L 148.7 x W 31.8 x H 22.4 mm


Nominal Input Voltage Max. Output Power Nominal Output Voltage Max. Output Current Efficiency Max. Case Temperature THD Power Factor
120 & 277 Vac, 220 to 240 Vac 260 W 12, 24, 48 Vdc 21.6, 10.8, 5.4 A up to 93% typical 90°C (measured at the hot spot) < 20% > 0.9


For additional options of output current and output voltage, contact your sales representative or send an email to: SaveEnergy@ERP-Power.com

Aluminum Case L 214.4/240 x W 50.8 x H 38.5 mm




Nominal Input Voltage Max. Output Power Nominal Output Voltage Max. Output Current Efficiency Max. Case Temperature THD Power Factor
120 & 277 Vac 90 W 12, 24 Vdc 5, 3.75 A up to 85% typical 90°C (measured at the hot spot) < 20% > 0.9


For additional options of output current and output voltage, contact your sales representative or send an email to: SaveEnergy@ERP-Power.com

Aluminum Case L 172.5 x W 43.9 x H 27.1 mm




Nominal Input Voltage Max. Output Power Nominal Output Voltage Max. Output Current Efficiency Max. Case Temperature THD Power Factor
120 & 277 Vac 90 W 12, 24 Vdc 5, 3.75 A up to 90% typical 90°C (measured at the hot spot) < 20% > 0.9


For additional options of output current and output voltage, contact your sales representative or send an email to: SaveEnergy@ERP-Power.com

Aluminum Case L 172.5 x W 33.3 x H 24.1 mm


Power Output Voltage Output Current Max Efficiency Max. Ambient
Temperature THD Power Factor Dimming Range Startup Time
120 Vac 100 W 12, 24 V Constant Voltage 4.2 A up to 91% typical 40°C < 20% > 0.9 1-100% of light output 500 ms typical


VSW40U-12-ERP 120 40.0 8.0 12 3.3 11.1 - 12.9 (+/-0.9 V) < 10%
VSW60U-12-ERP 120 60.0 10.0 12 5 11.1 - 12.9 (+/-0.9 V) < 10%
VSW60U-24-ERP 120 60.0 3.0 24 2.5 22.2 - 25.8 (+/-1.8 V) < 10%
VSW100U-24-ERP 120 100.0 5.0 24 4.2 22.2 - 25.8 (+/-1.8 V) < 10%
100 W: Metal Case & Metal Wall Plate 40 W & 60 W: Plastic Case & Metal Wall Plate
For additional options of output current and output voltage, contact your sales representative or send an email to: SaveEnergy@ERP-Power.com




Nominal Input · Voltage

I N T H E B E S T L I G H T
Lumenetix-araya recreates and controls light that emulates the spectral
quality of daylight. And, Lumenetix-araya accesses a rich gamut
of pastels and saturated colors to unveil new design frontiers.



Kitchen: 4000K
Kitchen: 6000K




Bedroom: Lavender; Bathroom: 1650K
Bedroom and Bathroom: 2700K



Living Room: Magenta / Violet / 2700K
Media Room: Violet / Jade / Pink
Private Residence in San Francisco. Fixtures by LF Illumination. DMX controls by Lutron®. Architect: Wesley Wei. Lighting Designer: Eve Quellman.

The replication and control of the range and beauty of daylight while ensuring color consistency from fixture-to-fixture over life,
whether you use Tunable Color, Tunable White, LED Dimming or Halogen Dimming light paths. After all, Color is How You Light It™.

HIGHEST QUALITY TUNABLE WHITE LIGHT: Lumenetix-araya recreates daylight by mixing LED colors of the rainbow – red, amber, mint, cyan and blue, plus green if an expanded gamut option with saturated green is desired – to deliver full spectrum light from 1650K to 8000K at 90+ CRI.
Spectral Quality of Daylight

Expanded Gamut
NATURAL DAYLIGHT EMULATION from sunrise through sunset – the light tracks the CIE Blackbody locus from 1650 - 4500K and then smoothly transitions to the Daylight Curve to 8000K.

FULL COLOR ACCESS to millions of colors within the gamut area created by the LEDs in the CIE color space, enabling tailored light from shades of pastels to saturates.
E-FLICKER FREE LED DIMMING TO 0.1%* is enabled by a proprietary hybrid technology that maintains color consistency while dimming.

Color Consistency Over Life
Less than 2 SDCM
TRADITIONAL DIMMING RECREATED by emulating a halogen lamp from 3050K at full brightness to 1800K at 1%.
COLOR CONSISTENCY OF LESS THAN 2 MACADAM ELLIPSE OVER LIFE from fixture-to-fixture as verified by independent LM-84 testing – a corrective closed loop system and a predictive feedback algorithm resolve thermal droop and lumen depreciation for each LED.
Saturated Green Option · Halogen Dimming

TYPICAL SPD CURVE TYPICAL TM-30 DATA
CTM 2 SPD at 4000K
CTM 2 TM-30 Data at 4000K

Color Vector Graphic Color Saturation Graphic


For additional color and performance information, please refer to www.erp-power.com
ANALOG - Two 0-10 V lines can be used to control Dimming and CCT independently, or program Scenes — in any combination of Dimming, CCT, Saturation and Hue — and recall them with five 0-10 V presets or the Lumenetix-araya iOS App.
DIGITAL - Lumenetix-araya is compatible with all industry-leading digital control systems.
iOS - Used in conjunction with Digital or Analog controls, each module can be wirelessly commissioned and then the radio turns off for enhanced security.

CCT - DDM 2 (WARM-DIM; 1800 - 3050K) SAT HUE
0-10 V ~1% P *** ***
LUTRON ECOSYSTEM** P N/A N/A
AVI-ON WIRELESS BLE MESH P N/A P N/A P P P
DALI TYPE 8 P N/A N/A
WATTSTOPPER DLM P N/A N/A
*100 - 0.1% eFlicker-Free LED dimming is available for specific modules/arrays when connected to 0.1% dimming-capable digital controls. 100 - 1% dimming is available with analog 0-10 V control and for Warm/Dynamic Dimming Modules (DDM). **Refer to the separate DMX Lookup Tables or Lutron EcoSystem Lookup Tables for specific programming values and information. ***Two 0-10 V lines can be used to control Dimming and CCT independently, or program Scenes — in any combination of Dimming, CCT, Saturation and Hue — and recall them with five 0-10 V presets or the Lumenetix-araya iOS App. Individual product specifications may vary; please refer to technical product data sheets. Bluetooth LE is provided on board for commissioning purposes only.

Spectral Quality of Daylight
Color Consistency Over Life
1650 - 8000K
Pastels to Saturates
3050 (100%) - 1800K (1%)
100% - 0.1%*
Less than 2 SDCM
COLOR TUNING MODULES & ARRAYS WARM/DYNAMIC DIMMING MODULES & ARRAYS

CTM 1C CTM 1C HD CTM 1C HD WI CTM 2 LTM 2 DDM 1C DDM 2
LUMENS 550 - 2000 750 - 2000 750 - 1700 990 - 9000 1000 lm/ft 480 - 1850 990 - 9000
NOMINAL WATTAGE (W) 12 - 35 12 - 35 12 - 35 20 - 120 10 watts/ft 12 - 35 20 - 120
COLOR ACCURACY1 Less than 2 SDCM Less than 2 SDCM
(mm) 9, 12, 19 19 9, 19 9, 12, 19, 32, 41 9, 12, 19 9, 12, 19, 32, 41
DIAMETER (mm) 50 50 50 40, 50, 60, 70 50 40, 50, 60, 70
LINEAR CONNECTOR
POSITION
LINEAR LED
POSITION
CONTROL
OPTIONS
*0.1% eFlicker-Free / Hybrid LED dimming available for specific modules/arrays, and only when connected to 0.1% dimming-capable digital controls. Individual specifications may vary; please refer to technical product data sheets.


G O O D L I G H T I S A R I G H T
YOU’LL FIND LUMENETIX-ARAYA TECHNOLOGY IN LUMINAIRES FROM THESE BRANDS.
Technology | Engineering | Innovation
LIGHTING
LIGHTING
Metall Technik · Leuchten · Group Lighting

+1-805-517-1300 SaveEnergy@ERP-Power.com 893 Patriot Drive, Suite E, Moorpark, CA 93021


Pages referenced in this manual — manufacturer, support and downloads.
Owners and our team usually reply within a day — and your question helps the next person too.
Be the first to ask — other owners or our team will answer.