Instruction/ maintenance manual of the product GCS 70 Braun
Go to page of 8
1 0 GCS 70 98826974/X-08 Type 4560 Cordless Pocket Styler 98826974_GCS70 UK Seite 8 Dienstag, 7. Oktober 2008 9:14 09.
The following information is provided to allow you to enjoy safe and easy use of your Braun styler. Caution • Please read the use instructions carefully before use. • Do not use hair spray during styling. • When igniting the styler please ensure it is held away from the hair, face and clothing.
Follow these instructions carefully to insert or change the Braun energy cell. Never insert or change it near an open fire or flame. 1 The switch must be set at the «0» (= off) position. 2 Remove the end cap by turning in the direction of the arrow.
Important: For the maxi size energy cell, use the long end cap (b), use the short end cap (a) for the mini energy cell. 4 Before each use, look through the translucent end to check the gas level. Change the energy cell when empty (see instructions above).
7 Turn on the gas flow by setting the switch to the «1» position. Wait for 5 seconds. 8 Pull the starter back until you hear an audible «click». The on/ready indicator will then light up, confirming that the heating system is on. The on/ready indicator con- sists of two illuminated dots on the tong.
In the unlikely case that the styler does not heat up, make sure the gas is on and push the starter again. 10 Turn off the styler by moving the switch to the «0» position and push the handle of the styler out of the protective cover, as indicated. Turn the protective cover around and place it firmly over the styler.
• After turning on the gas flow, wait for 5 seconds before activating the starter (see steps 7 and 8). • Before each use, check the gas level (see step 4). • Only use Braun energy cells. • Use the right end cap for each size of Braun energy cell (see step 3).
We grant 2 years guarantee on the product commencing on the date of purchase. Within the guarantee period we will eliminate, free of charge, any defects in the appliance resulting from faults in materials or workmanship, either by repairing or replacing the complete appliance as we may choose.
An important point after buying a device Braun GCS 70 (or even before the purchase) is to read its user manual. We should do this for several simple reasons:
If you have not bought Braun GCS 70 yet, this is a good time to familiarize yourself with the basic data on the product. First of all view first pages of the manual, you can find above. You should find there the most important technical data Braun GCS 70 - thus you can check whether the hardware meets your expectations. When delving into next pages of the user manual, Braun GCS 70 you will learn all the available features of the product, as well as information on its operation. The information that you get Braun GCS 70 will certainly help you make a decision on the purchase.
If you already are a holder of Braun GCS 70, but have not read the manual yet, you should do it for the reasons described above. You will learn then if you properly used the available features, and whether you have not made any mistakes, which can shorten the lifetime Braun GCS 70.
However, one of the most important roles played by the user manual is to help in solving problems with Braun GCS 70. Almost always you will find there Troubleshooting, which are the most frequently occurring failures and malfunctions of the device Braun GCS 70 along with tips on how to solve them. Even if you fail to solve the problem, the manual will show you a further procedure – contact to the customer service center or the nearest service center
