Instruction/ maintenance manual of the product X21 ADC
Go to page of 103
ADCP-50-30 4 Issue 19 June 199 9 105931 1 Re v A RS-232/V .24, X.21 and V .35 PatchSwitch User Manual COMP MODEM MON 0 F F A L M L E D DLY RST ALM DTR DSR CTS RTS DCD SQ RD TD 0 F F A L M L E D DLY RS.
ADCP-50-304 • Issue 19 • June 19 99 • Pre face Page ii COPYRI GHT © 1999, ADC T elecomm uni c at ion s, In c. All Rights Reserved Printed in the U.S.A. TRADEMARK INFORMATI ON ADC and ADC T e lecommunications are re gistered trademarks of ADC T elecommunicati ons, Inc.
ADCP-50-304 • Issue 19 • June 19 99 • Preface Page iii © 1999 , ADC Tele communica tions, Inc. T ABLE OF CONTENT S Content Pag e SECTION 1 INTRODUCTION 1 GENERA L . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
ADCP-50-304 • Issue 19 • June 19 99 • Pre face Page iv © 1999 , ADC Tele communica tions, Inc. T ABLE OF CONTENT S Content Pag e SECTION 4 PATCHSWITCH X.21 1 GENERA L. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
ADCP-50-304 • Issue 19 • June 19 99 • Preface Page v © 1999 , ADC Tele communica tions, Inc. T ABLE OF CONTENT S Content Pag e SECTION 6 INSTALLATI ON 1 GENERA L . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
ADCP-50-304 • Issue 19 • June 19 99 • Pre face Page vi © 1999 , ADC Tele communica tions, Inc. T ABLE OF CONTENT S Content Pag e 6.15 Request Softwa re Rev ision L evel ( REV) Com mand) . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
ADCP-50-304 • Issue 19 • June 19 99 • Preface Page vii © 1999 , ADC Tele communica tions, Inc. REVISION HISTORY ABOUT THIS MANUAL This user man ual desc ribes the RS-232/V .24 and V .35 PatchSwitch equipmen t. The manu al provides inform ation nece ssary to install and operat e these units.
ADCP-50-304 • Issue 19 • June 19 99 • Pre face Page vi ii © 1999 , ADC Tele communica tions, Inc. RELATED PUBLICATIONS Listed belo w are all the related manuals, the ir conte nt, and t heir publ ication nu mbers. Cop ies of these publ ication s can be ordered by contacting the ADC T echnica l Assistanc e Center at 1-800-36 6-3891 (in U.
ADCP-50-304 • Issue 19 • June 19 99 • Preface Page ix © 1999 , ADC Tele communica tions, Inc. GENERAL SAFETY PREC AUTIONS FCC COMPLIAN CE STATEMENT This produc t has been cert ified to co mply with the requirement s for class A computing device s per part 15 of the FCC regulat ions.
INTRODUCTION.
ADCP-50-304 • Is sue 19 • June 199 9 • Section 1: In tro ductio n Page 1- 1 © 1999 , ADC Tele communica tions, Inc. SECTION 1: INTRODUCTI ON 1 GENERAL . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
ADCP-50-304 • Issue 19 • June 19 99 • Sec tion 1: Introdu ct ion Page 1-2 © 1999 , ADC Tele communica tions, Inc. 12. Remote swit ch ing and alarm c ontrol opera tion up to 1,0 00 fee t a way from t he P at chSwit ch chas sis rack; 13.
ADCP-50-304 • Is sue 19 • June 199 9 • Section 1: In tro ductio n Page 1- 3 © 1999 , ADC Tele communica tions, Inc. The Interlocked group feature protects a de vice used as a substitute. A spare device may be connected to the DTE -B port of sev eral A/B switching modules as s ho wn in Figure 1-1 .
ADCP-50-304 • Issue 19 • June 19 99 • Sec tion 1: Introdu ct ion Page 1-4 © 1999 , ADC Tele communica tions, Inc. Figur e 1-1. T ypical H ot Spar e Mode m Confi gurati on MODULE 1 A B MODEM 1 M.
ADCP-50-304 • Is sue 19 • June 199 9 • Section 1: In tro ductio n Page 1- 5 © 1999 , ADC Tele communica tions, Inc. 2.2 PatchSwitch Equipment The PS equipment consists of a chassis with a control module and associ ated po wer supply , modules forpatching and/or switching and i nterfacing, blank panel and patch cords.
ADCP-50-304 • Issue 19 • June 19 99 • Sec tion 1: Introdu ct ion Page 1-6 © 1999 , ADC Tele communica tions, Inc. 2.2.1 PatchSwit ch Chassis The PS cha ssis i s the stan dard EI A 19-in ch rack moun ted uni t wit h a ba ckplane and s pace f or 18 modules.
ADCP-50-304 • Is sue 19 • June 199 9 • Section 1: In tro ductio n Page 1- 7 © 1999 , ADC Tele communica tions, Inc. 2.2.3 Data Conver ter Module (PSR-06) This module i s a printed circ uit board as sembly with component s, a front pane l with four LED status indicator s and a rear 96-pin DIN connect or .
ADCP-50-304 • Issue 19 • June 19 99 • Sec tion 1: Introdu ct ion Page 1-8 © 1999 , ADC Tele communica tions, Inc. 2.2.11 Blank Pane l (PSM-09) This panel is used in ch assis mo dule posit ions in li eu of a module. The panel is a tw o piece assemb ly secured t o the chass is b y two mount ing scre ws.
ADCP-50-304 • Is sue 19 • June 199 9 • Section 1: In tro ductio n Page 1- 9 © 1999 , ADC Tele communica tions, Inc. 3 SPECIFICA TIONS Phys ic al Char act er istics PS Chassis Height: 7 inches (17.78 cm) W idth: 19 inches (48.3 cm) Depth: 12 inches (30.
FUNCTIONAL DESCRIPTION.
ADCP-50-30 4 • Issue 19 • Ju ne 1999 • Se ct ion 2: Fun ctional De sc ript io n Page 2- 1 © 1999 , ADC Tele communica tions, Inc. SECTION 2: FUNCTIONAL D ESCRIPTION 1 GENERAL . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
ADCP-50-304 • Issue 19 • June 19 99 • Sec tion 2: Functio nal Description Page 2-2 © 1999 , ADC Tele communica tions, Inc. Figur e 2-1. Pa tchSwi tch with In-Line A ccess (PSM-01 , PSM-02 ) 3 A/B SWITCHING WITH OFF-LINE MONITOR ACCESS The capabi lity for accessi ng the of f-line DTE d ev ice is il lustrated in Figure 2-2 .
ADCP-50-30 4 • Issue 19 • Ju ne 1999 • Se ct ion 2: Fun ctional De sc ript io n Page 2- 3 © 1999 , ADC Tele communica tions, Inc. Figure 2 -2. Patc hSwitch wi th Off-Lin e Access (PSM- 04, PSM-05) 3.
ADCP-50-304 • Issue 19 • June 19 99 • Sec tion 2: Functio nal Description Page 2-4 © 1999 , ADC Tele communica tions, Inc. A remote co ntrol de vice can contr ol the opera tion of up to 16 ful l PS chassis assemblies (16 modules ea ch) using a dedicat ed communication s channel.
ADCP-50-30 4 • Issue 19 • Ju ne 1999 • Se ct ion 2: Fun ctional De sc ript io n Page 2- 5 © 1999 , ADC Tele communica tions, Inc. Figure 2-4. RCU to Local Pat chSwtich Cha ssis, Interc onnection Bl ock Diagram RS-422 RS-232 REMO TE CONTROL UNIT UP T O 1000 FT .
ADCP-50-304 • Issue 19 • June 19 99 • Sec tion 2: Functio nal Description Page 2-6 © 1999 , ADC Tele communica tions, Inc. The cable connector s are 9-pin, D- subminiat ure. Both end -connectors are male. The ca ble may be up to 1 ,000 feet i n length.
ADCP-50-30 4 • Issue 19 • Ju ne 1999 • Se ct ion 2: Fun ctional De sc ript io n Page 2- 7 © 1999 , ADC Tele communica tions, Inc. Up to four ( 4) PS chassi s can be bank switched b y daisy chai ning the CMs vi a the 9-pin D- subminiat ure and en suring that each CM is st rapped for dc pulse cont rol.
ADCP-50-304 • Issue 19 • June 19 99 • Sec tion 2: Functio nal Description Page 2-8 © 1999 , ADC Tele communica tions, Inc. The thre e classes of interlo ck groups a vail able are: 1. Global I nterlock : Groups 1 and 2 are globa l and may be e xtended to all chassis in a system, us ing a 20-pin i nt erchassi s i nt er loc k ca bl e.
ADCP-50-30 4 • Issue 19 • Ju ne 1999 • Se ct ion 2: Fun ctional De sc ript io n Page 2- 9 © 1999 , ADC Tele communica tions, Inc. Figure 2- 5. LED/Alarm Pa tch Modu le with A/B Switching Simplifie d Circuit Dia gram Figure 2 -6.
ADCP-50-304 • Issue 19 • June 19 99 • Sec tion 2: Functio nal Description Page 2-10 © 1999 , ADC Tele communica tions, Inc. T able 2 -3. RS-232 Modem T erminal Interfa ce PIN NAME SOURCE FU NCT.
ADCP-50-30 4 • Issue 19 • Ju ne 1999 • Se ct ion 2: Fun ctional De sc ript io n Page 2-11 © 1999 , ADC Tele communica tions, Inc. 3.3 Patch Module with A/B Sw itching and In-Line Patch Access (.
ADCP-50-304 • Issue 19 • June 19 99 • Sec tion 2: Functio nal Description Page 2-12 © 1999 , ADC Tele communica tions, Inc. 4 A/B SWITCHING MODULE (PSM-03) This module pro vides A/B switching on ly . A simplif i ed ci r cui t di agr am of t hi s modul e is sho wn in Figure 2- 8 .
ADCP-50-30 4 • Issue 19 • Ju ne 1999 • Se ct ion 2: Fun ctional De sc ript io n Page 2-13 © 1999 , ADC Tele communica tions, Inc. Figure 2- 8. A/B S witching Mo du le Simplifie d Circuit Diag r.
ADCP-50-304 • Issue 19 • June 19 99 • Sec tion 2: Functio nal Description Page 2-14 © 1999 , ADC Tele communica tions, Inc. alarm is t hus user se lect able for an y one of eight leads of th e lo wer patch port. The EIA RS-232/ CCITT V .24 mode m interfa ce si gnal l eads a re sh own in T able 2-3 .
ADCP-50-30 4 • Issue 19 • Ju ne 1999 • Se ct ion 2: Fun ctional De sc ript io n Page 2-15 © 1999 , ADC Tele communica tions, Inc. Figure 2-10. LED/Al arm Patc h Interface Detailed Ci rcuit Di agram 8 TEST MODULE (PSM-12) T est Modul e PSM-12 pro vides the user with RS-232/V .
ADCP-50-304 • Issue 19 • June 19 99 • Sec tion 2: Functio nal Description Page 2-16 © 1999 , ADC Tele communica tions, Inc. This logic is also contro lled by the RST (Rese t) touch swit ch, tog.
ADCP-50-30 4 • Issue 19 • Ju ne 1999 • Se ct ion 2: Fun ctional De sc ript io n Page 2-17 © 1999 , ADC Tele communica tions, Inc. 10 PS RS-422/RS-232 INTERF ACE CONVER TER MODULE (PSR-06) The P.
ADCP-50-304 • Issue 19 • June 19 99 • Sec tion 2: Functio nal Description Page 2-18 © 1999 , ADC Tele communica tions, Inc. Figure 2 -14. PSR-06 Interfac e Converter 11 PS CHAS SIS POW ER A power supply u nit is use d with the PS C hassis. The PSW -000001 or PSW -000003 is used w hen input power is 90 to 240 V A C.
PATCHSWITCH V.35.
ADCP-50-304 • Issue 19 • June 19 99 • Sec tion 3: PatchSw itch V.35 Page 3- 1 © 1999 , ADC Tele communica tions, Inc. SECTION 3: PATC HSWITCH V .35 1 PRODUC T OF FERING . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
ADCP-50-304 • Issue 19 • June 19 99 • Sec tion 3: PatchSw itch V.35 Page 3-2 © 1999 , ADC Tele communica tions, Inc. 2 APPLICA TION WITH EXIS TING UNITS The V .
ADCP-50-304 • Issue 19 • June 19 99 • Sec tion 3: PatchSw itch V.35 Page 3- 3 © 1999 , ADC Tele communica tions, Inc. Figur e 3-2. V .35 Int erface Modul e and Con version Boar d T able 3 -2.
ADCP-50-304 • Issue 19 • June 19 99 • Sec tion 3: PatchSw itch V.35 Page 3-4 © 1999 , ADC Tele communica tions, Inc. 3 FUNCTION SELECTION-MODULES Sev era l op ti ona l ite ms s hown in T able 3-3 sho uld be consi dered bef ore any PSM-16 or PSM-18 module s are placed i nto servi ce.
ADCP-50-304 • Issue 19 • June 19 99 • Sec tion 3: PatchSw itch V.35 Page 3- 5 © 1999 , ADC Tele communica tions, Inc. Figu r e 3-3. PSM-1 6 and PSM-1 7 Mo du le PC Bo ard (Com p one nt Side ) 4 FUNCTIONAL SELECTION—C ONVERSION BOARD The ite m found in T able 3-4 is asso ciated wit h the con versio n bo ard.
ADCP-50-304 • Issue 19 • June 19 99 • Sec tion 3: PatchSw itch V.35 Page 3-6 © 1999 , ADC Tele communica tions, Inc. Figure 3 -4. FFM-01 and FFM-02 Conversion Board Figur e 3-5.
ADCP-50-304 • Issue 19 • June 19 99 • Sec tion 3: PatchSw itch V.35 Page 3- 7 © 1999 , ADC Tele communica tions, Inc. T able 3-5 . Connection s of Unassign ed Pins on Subboard o---K o---L o---M.
ADCP-50-304 • Issue 19 • June 19 99 • Sec tion 3: PatchSw itch V.35 Page 3-8 © 1999 , ADC Tele communica tions, Inc. 5 HARDW ARE INST ALLA TION Remov e powe r to t he she lf b y t urnin g of f the po wer supply or unpl ugging the po wer transf ormer connecte d to the c hassis.
ADCP-50-304 • Issue 19 • June 19 99 • Sec tion 3: PatchSw itch V.35 Page 3- 9 © 1999 , ADC Tele communica tions, Inc. 6 RECOMMENDED MA TING CONNECTOR P A R TS DESCRIPT ION VENDOR PART NUMBE R Connector V .
PATCHSWITCH X.21.
ADCP-50-304 • Issue 19 • June 19 99 • Sec tion 4: PatchSw itch X.21 Page 4- 1 © 1999 , ADC Tele communica tions, Inc. SECTION 4: PATCHSW ITCH X.21 1 GENERAL . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
ADCP-50-304 • Issue 19 • June 19 99 • Sec tion 4: PatchSw itch X.21 Page 4-2 © 1999 , ADC Tele communica tions, Inc. 2 DESCRIP TION The ADC P atchSwitch X.21 modules p rovi de monitor and patch acc ess to X.21 l eads. Some modules al so pro vide loc al and remot e alarming, t esting, or s tatus ind icators.
ADCP-50-304 • Issue 19 • June 19 99 • Sec tion 4: PatchSw itch X.21 Page 4- 3 © 1999 , ADC Tele communica tions, Inc. 2.2 PSM-813001 X.21 PatchSwi tch Module with A/B Switching and Off -Line Patch Access This mo dule pro vides mo nitoring and access t o 15 acti ve X.
ADCP-50-304 • Issue 19 • June 19 99 • Sec tion 4: PatchSw itch X.21 Page 4-4 © 1999 , ADC Tele communica tions, Inc. 2.4 PSM-83301 X.21 PatchSwitch Module This module provi des monitorin g and access to 15 acti ve X.21 le ads. A block di agram repres enting th e PSM-833001 module i s sho wn in Fig ure 4-4 .
ADCP-50-304 • Issue 19 • June 19 99 • Sec tion 4: PatchSw itch X.21 Page 4- 5 © 1999 , ADC Tele communica tions, Inc. 2.6 PSO-839001 Backplane Adapter Module Three 15- pin D-su b connector s, l oca ted on the back of thi s backpla ne ad apt er pro vi de a point of connecti on for c ustomer ca bling.
ADCP-50-304 • Issue 19 • June 19 99 • Sec tion 4: PatchSw itch X.21 Page 4-6 © 1999 , ADC Tele communica tions, Inc. Figure 4-6. A/B Switchi ng Block Diagram 3.2 Switch Module Interlocks The A/B switch act i v ates the A/B relay s. The A/B relays complete the X.
ADCP-50-304 • Issue 19 • June 19 99 • Sec tion 4: PatchSw itch X.21 Page 4- 7 © 1999 , ADC Tele communica tions, Inc. 3.4 Status Indication Modules The six X.
ADCP-50-304 • Issue 19 • June 19 99 • Sec tion 4: PatchSw itch X.21 Page 4-8 © 1999 , ADC Tele communica tions, Inc. 3.7 Alarm T ime Delay The PSM-83 2002 T est/Sta tus module co ntains tw o eight posi tion rot ary switch es on the f ront panel.
ADCP-50-304 • Issue 19 • June 19 99 • Sec tion 4: PatchSw itch X.21 Page 4- 9 © 1999 , ADC Tele communica tions, Inc. 3.8 B Alarm Enable/Disable The alar m can be disa bled b y movi ng the jumper l abeled ALMB/A LMB on the module b oard. The alar m is ena ble d wh en the ju mpe r is in t he ALMB pos itio n.
ADCP-50-304 • Issue 19 • June 19 99 • Sec tion 4: PatchSw itch X.21 Page 4-10 © 1999 , ADC Tele communica tions, Inc. 5 SPECIFICA TIONS Module spec if ication are sho wn in Ta b l e 4 - 5 .
ADCP-50-304 • Issue 19 • June 19 99 • Sec tion 4: PatchSw itch X.21 Page 4-11 © 1999 , ADC Tele communica tions, Inc. The thre e classes of inter lock groups a va ilable are : 1. Global Interl ock: Groups 1 a nd 2 are gl obal and may be exten ded to all chassis in a system, us ing a 20-pin i nt erchassi s i nt er loc k ca bl e.
ADCP-50-304 • Issue 19 • June 19 99 • Sec tion 4: PatchSw itch X.21 Page 4-12 © 1999 , ADC Tele communica tions, Inc. 6.3 Alarm T ime Delay Setti ng T ime delay v alues are f ixed. The switch po sitions are time v alues rangi ng from none to 105.
SITE PREPARATION.
ADCP-50-3 04 • Iss ue 19 • June 1999 • Sec tion 5: Site Prep ara t io n Page 5- 1 © 1999 , ADC Tele communica tions, Inc. SECTION 5: SITE PREPARATI ON 1 GENERAL . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
ADCP-50-304 • Issue 19 • June 19 99 • Sec tion 5: Site Prepar at ion Page 5-2 © 1999 , ADC Tele communica tions, Inc..
INSTALLATION.
ADCP-50-304 • Issue 19 • June 19 99 • Sect ion 6: Ins tal lat io n Page 6- 1 © 1999 , ADC Tele communica tions, Inc. SECTION 6: INSTALLATION 1 GENERAL . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
ADCP-50-304 • Issue 19 • June 19 99 • Sec tion 6: Installatio n Page 6-2 © 1999 , ADC Tele communica tions, Inc. 1.2 PatchSwitch Module Installation Procedure Modules may b e i nstal led be fore o r a fter the ch assis is in st alled in the ra ck.
ADCP-50-304 • Issue 19 • June 19 99 • Sect ion 6: Ins tal lat io n Page 6- 3 © 1999 , ADC Tele communica tions, Inc. Figure 6-1. RDC-01/ 02 PatchS witch Cha ssis Rear View 1.
ADCP-50-304 • Issue 19 • June 19 99 • Sec tion 6: Installatio n Page 6-4 © 1999 , ADC Tele communica tions, Inc. Figur e 6-2. D ata Con verte r Modu le 1.6 Control Module DIP Sw itch Settings When P atchSwitch e quipment i s conf igured for serial re mote co ntrol, t he chass is addre ss must be selec ted on each co ntrol mod ule.
ADCP-50-304 • Issue 19 • June 19 99 • Sect ion 6: Ins tal lat io n Page 6- 5 © 1999 , ADC Tele communica tions, Inc. Ta b l e 6 - 1 sho ws the bi nary switch settings co rrespondi ng to the ident ifying PS chas sis address es. Some ol der contr ol modules o nly allo w addresse s up to “07”.
ADCP-50-304 • Issue 19 • June 19 99 • Sec tion 6: Installatio n Page 6-6 © 1999 , ADC Tele communica tions, Inc. 2 CONTROL MODULE AUTOF ALLBACK JUMPER INST ALLA TION When the autofall back opti on is selecte d, the prope r jumper must be i nstalle d on the CM ( Figure 6-4 ) bef ore the modul e is i nstalled in the PS c hassis.
ADCP-50-304 • Issue 19 • June 19 99 • Sect ion 6: Ins tal lat io n Page 6- 7 © 1999 , ADC Tele communica tions, Inc. Figure 6 -5. Autofal lback Jumpers 3 CONTROL MODULE REMOTE CONTROL JUMPER INST ALLA TION The CM is fact ory set to c onf igure th e 9-pin D-s ubminiatur e connect or as a n RS-422 s erial p ort.
ADCP-50-304 • Issue 19 • June 19 99 • Sec tion 6: Installatio n Page 6-8 © 1999 , ADC Tele communica tions, Inc. 4 PS MODULE JUMPER INST ALLA TION 4.
ADCP-50-304 • Issue 19 • June 19 99 • Sect ion 6: Ins tal lat io n Page 6- 9 © 1999 , ADC Tele communica tions, Inc. 4.3 Automatic Alarm Reset Jumper Installation The automat ic reset jumper must be installe d before the module is instal led in the cha ssis.
OPERATION.
ADCP-50-30 4 • Issu e 19 • J une 1999 • Section 7: Op era tion Page 7- 1 © 1999 , ADC Tele communica tions, Inc. SECTION 7: OPE RATION 1 GENERAL . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
ADCP-50-304 • Issue 19 • June 19 99 • Sec tion 7: Opera tion Page 7-2 © 1999 , ADC Tele communica tions, Inc. 1 GENERAL The PS equipmen t fu nctions i n eit he r pat ch ing or switchin g methods of ope rat ion.
ADCP-50-30 4 • Issu e 19 • J une 1999 • Section 7: Op era tion Page 7- 3 © 1999 , ADC Tele communica tions, Inc. The mid dle port functio ns in a s imilar man ner for t he middle connector on the c hassis r ear panel. When in the “ B” stat e, monitor access; “ A” state, test acce ss to the of f-line “B” de vice.
ADCP-50-304 • Issue 19 • June 19 99 • Sec tion 7: Opera tion Page 7-4 © 1999 , ADC Tele communica tions, Inc. 6 CONTROL MODULE SWITCHING (LOCAL) The switc h function de signator s for the t hree momentar y toggle swit ches loc ated on the f ront panel of the contr ol module are termed: 1.
ADCP-50-30 4 • Issu e 19 • J une 1999 • Section 7: Op era tion Page 7- 5 © 1999 , ADC Tele communica tions, Inc. 6.3 Bank Switching Bank switc hing is per formed by t he operato r toggling the .
ADCP-50-304 • Issue 19 • June 19 99 • Sec tion 7: Opera tion Page 7-6 © 1999 , ADC Tele communica tions, Inc. 6.6 Remote Control Swit ching The P atchSwitc h Control Module is c apable of con t.
ADCP-50-30 4 • Issu e 19 • J une 1999 • Section 7: Op era tion Page 7- 7 © 1999 , ADC Tele communica tions, Inc. Non-digi t and non- blank char acters are recogn iz ed b y th e CM so ft w are as parameter s eparator s. Therefor e, tw o such cons ecuti v e charac ters (no n-digit and nonblan k) are re cognized a s a null param eter .
ADCP-50-304 • Issue 19 • June 19 99 • Sec tion 7: Opera tion Page 7-8 © 1999 , ADC Tele communica tions, Inc. In the next exampl e, t he syste m wou ld n ot inte r pre t the G O comm and from the s tr ing s : bGO (b meaning bla nk) GGO As pre viously st ated, commands may be entere d in eith er upper o r lo wer case a lpha chara cters.
ADCP-50-30 4 • Issu e 19 • J une 1999 • Section 7: Op era tion Page 7- 9 © 1999 , ADC Tele communica tions, Inc. 6.13 Select PS Chassis Command The remo te c ontrol de vice sele ct s a PS ch ass is b y i ss uin g an acti va tion comman d containi ng th e chassis ' i dent if ic at ion number .
ADCP-50-304 • Issue 19 • June 19 99 • Sec tion 7: Opera tion Page 7-10 © 1999 , ADC Tele communica tions, Inc. 6.15 Request Software Revision Level (REV) Command) The REV com mand requests the CM to transmit the soft ware r ev ision le vel.
ADCP-50-30 4 • Issu e 19 • J une 1999 • Section 7: Op era tion Page 7-11 © 1999 , ADC Tele communica tions, Inc. 6.18.2 Module Posi ti on Entrie s Some displa ys are inst ru ct ion s to enter t he nu me ri cal modul e pos it ions of A/B Swit ch Module s.
ADCP-50-304 • Issue 19 • June 19 99 • Sec tion 7: Opera tion Page 7-12 © 1999 , ADC Tele communica tions, Inc. 6.19 TLKxx Exec ution CR T actions and displays in volv ed in operati ng in the TLKxx format are sho wn in Figure 7-1 and def ined in Ta b l e 7 - 3 .
ADCP-50-30 4 • Issu e 19 • J une 1999 • Section 7: Op era tion Page 7-13 © 1999 , ADC Tele communica tions, Inc. 6.19.1 Changing Swi tch Status All menus and select ions in v olve d in establ ishing acce ss module switch conf igurations ar e shown in Figure 7-2 and de fi ned in T able 7-4 .
ADCP-50-304 • Issue 19 • June 19 99 • Sec tion 7: Opera tion Page 7-14 © 1999 , ADC Tele communica tions, Inc. T able 7-4 . Change Switch S election ACTION/DIS PLAY DISPLA Y DEFINITION Enter 1. Switch from the Select Operation Menu to display the present switch status followed b y: Select Switch Acti on l.
ADCP-50-30 4 • Issu e 19 • J une 1999 • Section 7: Op era tion Page 7-15 © 1999 , ADC Tele communica tions, Inc. Enter 7. Configuration Switch from the Select Switch Action Menu to display: Select C onf iguration l. (11 C haracters) 2. (11 C haracters) 3.
ADCP-50-304 • Issue 19 • June 19 99 • Sec tion 7: Opera tion Page 7-16 © 1999 , ADC Tele communica tions, Inc. T able 7 -5. Chan ge Switch Status ACTION/DIS PLAY DISPLA Y DEFINITION Enter 3. Status from the Select Oper ation Me nu to di spla y: Select Status Action l.
ADCP-50-30 4 • Issu e 19 • J une 1999 • Section 7: Op era tion Page 7-17 © 1999 , ADC Tele communica tions, Inc. Figur e 7-2. Changin g Switch Statu s Figure 7-3.
ADCP-50-304 • Issue 19 • June 19 99 • Sec tion 7: Opera tion Page 7-18 © 1999 , ADC Tele communica tions, Inc. 6.20 SPKxx Format When a remote cont rol de vice selects a PS cha ssis b y issuing a “SPKxx” command , and then request s status b y issuing a “UP# ” command, the CM respond s with the condense d status format.
ADCP-50-30 4 • Issu e 19 • J une 1999 • Section 7: Op era tion Page 7-19 © 1999 , ADC Tele communica tions, Inc. 6.21 Reset Alarm Status (IN Command) The IN (Ini tialize) command request s the CM to res et the alarm stat us in all t he modules contain ed in the se lected PS chas sis.
ADCP-50-304 • Issue 19 • June 19 99 • Sec tion 7: Opera tion Page 7-20 © 1999 , ADC Tele communica tions, Inc. The fo rmat for t he AL comm and string pa ramete rs is as follo ws: AL, <acti .
ADCP-50-30 4 • Issu e 19 • J une 1999 • Section 7: Op era tion Page 7-21 © 1999 , ADC Tele communica tions, Inc. flag ( $) occurs in the AB c ommand string, t he user mus t issue a GO command to perform the switchi ng operati ons.
ADCP-50-304 • Issue 19 • June 19 99 • Sec tion 7: Opera tion Page 7-22 © 1999 , ADC Tele communica tions, Inc. 6.24 Request Super Chassis Command (SC Comman d) The SC (Super Chassis) command is a quick-switch feature used b y the remote control de vice (terminal) to simultaneously select multiple chassis.
ADCP-50-30 4 • Issu e 19 • J une 1999 • Section 7: Op era tion Page 7-23 © 1999 , ADC Tele communica tions, Inc. 6.25 De-Select The PS Chassis (UNT) The U NT (U NT al k) com man d de -sel ects al l cha ssis in the syste m. Th e UNT comm and strin g does not re quire a comm and flag (# or $) prior to t he string te rminatin g character s.
ADCP-50-304 • Issue 19 • June 19 99 • Sec tion 7: Opera tion Page 7-24 © 1999 , ADC Tele communica tions, Inc. l7,2 000 If no chan ge in sta tus occu rre d in the S witch M ate Sys tem, the CM can not execute the UP command. 18,1000Paramet er syntax error in AB command.
GENERAL INFORMATION.
ADCP-50-304 • Issue 19 • June 19 99 • Sectio n 8: Gener al Infor ma t io n Page 8- 1 © 1999 , ADC Tele communica tions, Inc. SECTION 8: GENERAL INFORM ATION 1 WARRAN TY/SO F TWARE . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
ADCP-50-304 • Issue 19 • June 19 99 • Sec tion 8: General Inf orm a tio n Page 8-2 © 1999 , ADC Tele communica tions, Inc. 3 REPAIR CHARGES If the d efect and the necess ary repai rs are co ver.
Page 8- 3 ADCP-50-304 • Issue 19 • June 19 99 • Sectio n 8: Gener al Infor ma t io n 6 CUSTOMER INFORMATION AND ASSISTANCE F or customers w anting inf ormation on ADC products or help in using them, ADC of fers th e serv ices liste d belo w .
An important point after buying a device ADC X21 (or even before the purchase) is to read its user manual. We should do this for several simple reasons:
If you have not bought ADC X21 yet, this is a good time to familiarize yourself with the basic data on the product. First of all view first pages of the manual, you can find above. You should find there the most important technical data ADC X21 - thus you can check whether the hardware meets your expectations. When delving into next pages of the user manual, ADC X21 you will learn all the available features of the product, as well as information on its operation. The information that you get ADC X21 will certainly help you make a decision on the purchase.
If you already are a holder of ADC X21, but have not read the manual yet, you should do it for the reasons described above. You will learn then if you properly used the available features, and whether you have not made any mistakes, which can shorten the lifetime ADC X21.
However, one of the most important roles played by the user manual is to help in solving problems with ADC X21. Almost always you will find there Troubleshooting, which are the most frequently occurring failures and malfunctions of the device ADC X21 along with tips on how to solve them. Even if you fail to solve the problem, the manual will show you a further procedure – contact to the customer service center or the nearest service center
