
used, as for non-domestic use or in a commercial environment.
Make sure that the voltage of your power grid matches the voltage indicated on the type plate at the back of your TV device. If the power plug, AC input or device connector is used to disconnect this product from the supply, it must always be accessible and ready.
If the external flexible cable or cord of this product is damaged, it must be replaced by the manufacturer, a maintenance representative of the manufacturer or by a similarly qualified person to prevent any danger.
Allow more than 10 cm of space around the television to allow sufficient ventilation. Ventilation shall not be hindered by covering the ventilation vents with objects such as newspapers, tablecloths, curtains etc.
On certain models the indicator light is located on the side of the TV. When the indicator lamp is off at the front, this does not mean that the TV device is completely disconnected from the power grid. To completely disconnect the TV device, pull the plug.
The apparatus must not be exposed to dripping or splashing water and no objects filled with liquids, such as vases, shall be placed on the product.
The parts of the TV are heat sensitive. The maximum ambient temperature shall not exceed 35° Being Celsius. Do not cover the ventilation openings at the rear or sides of the TV set. Leave enough space around the TV for good ventilation. Place the device away from heat sources (fireplaces etc.) or devices that produce strong magnetic or electronic fields.
Batteries (installed battery block or installed batteries) must not be exposed to too much heat, such as sunlight, fire etc.
Never expose this device to rain or moisture, in order to avoid the risk of fire or electric shocks.
Never place the television on an unstable surface. A television can fall over and cause serious or fatal injury. Many injuries, especially of children, can be prevented by taking some simple precautions:
The humidity in rooms where the TV device is installed, it shall not exceed 75%. Moving the TV from a cold to a warm room can cause condensation on the screen (and on some parts in the TV set). Let the condensate evaporate before you turn on the TV device again.
The . .POWER/ • The TV-set or the • • remote control button can be used to turn on and switch the TV-setting device into standby mode. If you are not sure, Long time doesn't watch TV, then turn it off completely by removing the plug from the socket.
We recommend that you during Thunderstorms to remove the plug from the socket (including antenna) so that the TV device is not affected by electrical or electromagnetic peaks capable of causing damage. This is why electrical sockets and antenna connections to keep them accessible so that they can can be decoupled, if necessary.
Unmount the TV device immediately if you have a burning odour or Smoke Sensors. You may never, in any circumstances, open the TV set itself because you are at risk of having a electric shock walk when you do.
Equipment with this symbol is a Class II or double insulated electrical device. It is designed to avoid requiring a secure connection to electrical mass. Equipment without this symbol is a Class I electrical device. This type of device must be connected to an electrical outlet with a protective mass connection.
This apparatus is for domestic use only and must not be used in any other way.
Security

To prevent fire, keep candles or other open flames away from this product at all times.
To prevent injury, this device must be safely secured against the floor/wall in accordance with installation instructions.
To avoid the risk of RF radiation, this device should be at least 100cm away from use.
The TV screen used in this product is made of glass. It can therefore break if you drop the product or have it taken from other objects.
User's manual for multiple products
The TV screen is a product with highly advanced technology and provides an extremely detailed view. Sometimes some inactive pixels appear on the screen as a fixed blue, green or red dot. However, this will not affect the performance of your product.
The functions described in this manual are common to most models. Some features may not be available on your TV and/or your TV may contain functions that are not described in this user manual. The illustrations in this instructions for use may differ from the real product. Consult the real product.
Use a glass cleaner to clean the screen and soft cloth and mild cleaning agent for the rest of the TV set.
Dust the vents at the back and sides regularly. Solvents, abrasive or alcohol-based products can damage your TV device. If an object or liquid enters the device, immediately remove the plug from the socket and have it checked by an authorized repairman. Never open the device yourself as you may be in danger or damage the device.
This device meets ESD performance criteria. If the device is not restored to ethernet connection mode due to electrostatic discharge, action shall be taken by the user.
Hanging the TV device on the wall
To ensure a safe installation, please observe the following safety instructions:
TV screen · Care · ESD requirements

Information for users on the disposal of old equipment and batteries
These symbols indicate that the electrical and electronic equipment and battery with this symbol at the end of its life cycle should not be disposed of as ordinary household waste. On the other hand, products should be submitted to specific collection points for recycling electrical and electronic equipment as well as batteries, for proper treatment, recovery and recycling in accordance with your national legislation and Directive 2012/19/EU, 2006/66/EC and 2008/12/EC.
By removing these products correctly, you will contribute to the conservation of natural resources and help prevent potential negative effects on the environment and public health that could otherwise be caused by improper waste treatment of those products.
Notification:
For more information about collection points and recycling of these products, please contact the municipal office, the department responsible for disposal of your household waste or the shop where you bought the product.
The symbol "Pbb' under the symbol for batteries indicates that this battery contains lead.
Penalties may apply for improper disposal of such waste in accordance with national law.
If you wish to remove this product, please contact your supplier and check the terms and conditions of the purchase agreement.
[Other countries outside the European Union]
These symbols are only valid in the European Union. If you wish to remove these articles, do so in accordance with applicable national law or other rules in your country for the treatment of old electrical equipment and batteries.
TCL hereby declares that this apparatus is in conformity with Directive 2014/53/EU. The full text of the EU declaration of conformity is available at the following Internet address: www.thomsontv.eu
The images and illustrations in this manual are purely for reference purposes and may differ from the actual product in appearance. Product design and specifications may be modified without prior notice.



To switch on the TV after connecting the power cord, press or POWER/ .
-- The location of the power supply varies according to TV model. -- Remove the plug from the socket before connecting devices.



Connection to the Internet
cable network or wireless network is connected. The connection method may vary depending on your actual network configuration. If you have any questions about your home network, please. contact your Internet service provider.


-- Your TV may not be provided with all the connections shown in the diagram above. The number of USB and
HDMI ports may vary per TV model. -- The locations of keys and connections may vary per TV model. -- The USB connectors are for data input from USB drives and to connect other
relevant USB devices where applicable. -- All USB devices must be connected directly to the TV set without using extension cables.
In case an extension cable has to be used, we recommend a maximum length of 50cm recommended. Longer extension cables should have ferrite beads. -- The ARC (Audio Return Channel) function is only supported on the HDMI port that has been identified
with ARC. To use the ARC function, please switch. first the T-Link function as described in the section T-Link. -- We recommend you use high quality HDMI cables that are well shielded to allow possible interference
to be avoided. -- Please use a headphone with a 3.5 mm TRS plug. A high sound pressure from a
Headphones can cause hearing loss.
Modem Internet · Wireless router

Most of the features of your TV are available via the menus that appear on screen. The remote control provided with your TV can be used to navigate through the menus and configure general settings.

To turn the sound off and back on. Stop standby.
Keyboard keys To enter channel numbers or a digit. PRE-CH To return to the previous channel in TV mode. LIST To display the channel list. / To control the volume. To display program information, if available. To show the institution menu. P / To change channel. To open or close the Smart TV homepage. To display the option menu. ▲/▼/◄/► Navigation keys. OK To confirm an input or selection. To return to the previous menu. To select an input source. EXIT To the menu, home page, app etc. The Commission has already taken a decision on this matter. LANG To select a sound type available for the selected analogue TV program. To select an audio language available for the selected digital TV program. GUIDE To enable or disable the Electronic Program Guide (only available for digital channels). TEXT To switch on or off teletext. SUBT. To select a subtitle language available for the selected digital TV program. Color keys To select tasks or teletext page .. used for the HbbTV function. To fast-forward. To pause the playback. To fast-forward. ZOOM To select the screen mode. Note: It is recommended to use full screen mode. Do not use black beam display mode on both sides of the image (such as 4:3) for a longer period of time, otherwise the TV screen may be permanently damaged. To start the playback. To stop the playback.


Batteries never serve excessive heat, such as sunlight, open flames etc. exposed. Remove the batteries from the remote control if it is not used for a long time. In the equipment left behind batteries can cause damage due to deterioration and corrosive leakage and render the warranty invalid.
Bring exhausted batteries to local recycling companies for battery disposal in order to protect the environment. Remove the batteries as prescribed.
CAUTION: Explosion hazard if batteries are replaced by an incorrect type. Replace only the same or equivalent type recommended by the manufacturer of the equipment.
If the batteries in your remote control are exhausted, you can use the buttons on your TV device. They have the following functions:
For models with the following keys on the device:
For models with the following keys on the device:
/◄ TV Mode In Menus P ▲
◄ Properties (long impressions)
1. When the power cord is connected, the TV will be switched on immediately or in standby mode. In standby mode press the - or POWER/ -button on the TV device or key on the remote control to enable the TV. 2. Press the key on the remote to switch the TV to standby. The TV device will then remain on, but with very low energy consumption. 3. You can turn off the TV by removing the plug from the socket.
The first time you turn the device on, the screen appears Hello (Hello) that you are accompanied by the first installation procedure. Follow the on-screen instructions to complete the initial setting procedure, including language selection, network connection, channel scan and more. Make a choice for each step or skip one step. If you miss a step, you can set the setting later via the Settings menu.
The Commission has not yet adopted a decision on the basis of Article 85 (3) of the Treaty. Manufacturers cannot be held liable for a weak or non-viable broadcast in certain areas.

With the numerical keys: Press the corresponding number keys of the remote control to open the channels. Use the P buttons: Press the P-buttons / on the remote control or its buttons on the TV to browse through channels. Use the LIST button: Press the LIST-button on the remote control to display the channel list and press . OK to select the channels.
It is recommended that you wait for the function of Smart TV from stand-by a few minutes after activation of the TV.
Press the remote to display the source list. Press ./▼ to select TV or other signal sources and press OK to confirm. You can also press the remote to display the home page. Press . . / . to the page TV select and then press . OK to choose the desired input source.
It allows you to customize TV settings, such as image and sound. 1. Press the remote to display the Settings menu. 2. Press ./▼ to select the desired item and press OK/► to go to the corresponding submenu. 3. In the submenu press ./▼ to select menu options and press OK/► to go to the option list, customization interface or its submenu. 4. Press to return to the previous menu. 5. Press EXIT or to close the menu. Note: You can also press the
Volume control: Press the buttons / on the remote control or its buttons on the TV to increase or decrease the volume. The noise dampen: Press the -key to temporarily mute sound. Press this button again or press the button to restore sound.
remote control, Settings (Settings) select, if available and by OK press to go to the Settings menu. Some options may not be available for certain signal sources.
You can enjoy Internet applications (Apps) and specially customized Internet websites. You can manage this with the TV remote control.

This chapter describes the automatic search and storage of channels. This may be done in any of the following cases:
-- you have the step for installing channels
Skipped at first installation; -- you get a message that there are no channels in TV
mode; -- you want to update your channels. 1. Press the remote control in TV mode and select Channel > Channel scan (Channel > Channel scan). Press OK/► to open. 2. The TV sets and ranks the channels according to your country. Press ./▼ to Country (Country) to select, and press OK/► to open. Enter the default password 1234 or your own password if you have changed the password in the menu System > Lock (System > Lockdown). Press ./▼ to select your country and press OK to confirm. 3. Press ./▼ to Automatic search Select (Auto-search) and press OK/► to open it. 4. Press ./▼ to Tuner mode Select (Tuner mode) and press . Antenna (Antenne), Cable (Cable) or Satellite (Satellite) (Note: Satellite (Satellite) option is only available for selected models.) 5. Press ./▼ to select other configuration options. 6. After the configuration is complete, press ▼ Search Select (search) and press OK To scan channels. 7. The search for channels may take a few minutes. After automatic search, the channels are arranged according to a preset order. If you want to edit the channel list, please press. on the remote, select Channel > Channel organizer (Channel > Channel Management) and press OK/► to open.
Not out of the slot. Taking out the module will deactivate digital services. This TV has a CI+ certificate. It is recommended that you use a common interface module with CI+ marking. Access to common interface services
After connecting and activated the common interface module, press on the remote control, select Channel > Common interface (Channel > Common interface) and press OK/► to open. This menu option is only available if the common interface module is correctly inserted and activated. On-screen applications and content are provided by your digital TV service provider.
EPG is a guide on the screen to see which digital TV program is planned. You can navigate, select and display the program .
1. Press the remote, select Channel > EPG (channel > EPG) and press OK/► to open the option, or press remote control GUIDE, the menu of Program Guide (Program Guide) appears, allowing you to get information about the current and next program that is played on each channel. Pass through the various programme fuses using the buttons . 2. Use the related keys displayed at the bottom of the screen to open the EPG.
Encrypted digital TV channels can be decoded using a common interface module and a card available via a digital TV service provider. The common interface module can allow some digital services depending on the provider and services you choose (e.g. pay TV). Please contact your TV service provider for more information about services and terms.
bekijken.

To tons the program filter for digital TV programs. -- Custom schedule:
Press the red key to set a schedule. -- Select date (Select Date): Press
the green button and on OK to select a date. -- Schedule list: Press the yellow
key to open your schedule list. 3. Press EXIT to close EPG.
You can enable subtitles for any TV channel. Subtitles are broadcast via teletext or DVB-T/DVB-C digital broadcasts. For digital broadcasts, you have the extra option to select your desired subtitle language.
Depending on the broadcasting, it is possible to enjoy a service with multiple first teletext pages in different languages on digital TV channels. This feature allows you to select a available language as the first language for the opening page of Teletext.
1. Press the remote, select Channel > Subtitle >: Digital subtitle language 1st (Channel > Subtitle > 1st digital subtitle language) and press OK/► to open. 2. Press ./▼ to select a subtitle language as your preferred language and press to confirm OK. 3. Press ./▼ to Digital subtitle language 2nd (2nd digital subtitle language) and press OK/► to open. 4. Press ./▼ to select a secondary subtitle language and press to confirm OK. 5. Press EXIT or to close the menu.
You can set your TV to have Internet access via your local area network (LAN) by using the internet. a wired or wireless connection.
Quick control: Press SUBT. on the remote control to select directly a subtitle language available for a selected TV program.
Your TV is equipped for wireless connection to your home network. You only need a wireless router or modem.

-- a) Scan (Scan)
If the Wireless connection (wireless connection) is enabled, the TV searches for all access points within range. The found access points for the TV are displayed. Press ./▼ to select a available access point, and then press OK/► to connect. Select All wireless (All wireless) (if available) to search for more access points. NOTE: . . If you have a secure access point
select, you will need to enter the corresponding password. -- (b) Manual (Manual)
1. Press the remote control , select Network > Wired setting (Network > Cabled settings) and press OK/► to open the option. 2. Check the network information or enter IP settings (IP settings) in order to IP address, Subnet mask, Default gateway (IP address, subnet mask, default gateway) and Primary DNS Manually set (Primary DNS) values. Then press . OK select and press OK to confirm. The TV will try to connect again with the network and inform you about the result. 3. Press to return to the menu Network (Network). 4. If you want to check Internet connectivity, press . Connecting test (Connect test) select and press OK/►.
Press ./▼ to Manual (Manual) and press OK/► to open the option. You are asked to enter the correct SSID of an available wireless router, select its security type and enter the password (if necessary) to set up the connection. -- c) Auto (Automatic)
You can use this function to enable your TV from standby via a network. To use this function, please take care. for the following:

-- HbbTV services depend on transmitters
Use this feature to search for CEC devices connected to your TV's HDMI connections and enable one-touch playback and one-tuch stand-by between CEC device.
or country and may not be available in your area. -- You cannot download files to your
television with the HbbTV function. -- Application provider or broadcast related
circumstances can cause a HbbTV application to become temporarily unavailable. -- For access to HbbTV applications, must
your TV is connected to the Internet via a broadband link. HbbTV applications may not work properly due to network related problems. HbbTV Access
1. Press the remote control , select System > HbbTV settings > (System > HbbTV settings > HbTV) and press OK/► to open the option. 2. Press ./▼ to On Select (to) and press to confirm OK. 3. When you tune to a digital TV channel that HbbTV offers, you will be made aware of this by an indication on the screen (usually a red button, but other colors can also be used). Press the indicated colored button to open the interactive pages. 4. Use ./▼/ . / / and the color buttons to browse through HbbTV pages and press OK to confirm. HbbTV deactivation
Play one touch, playback on your DVD device is started by pressing the remote control of your D VD device (for example) onto the gamegrounds and automatically switching your TV to the right source to display the DV DVd content.
With system-standby, your TV and all connected HDMI devices are switched to standby mode by pressing the remote control of your TV on the -key (for example).
The connected equipment and it may happen that correct inter-operation of certain equipment is not possible when connected to this TV. For more information, please refer to the operating manual or manufacturer of problematic equipment.
To prevent malfunctions that may be caused by HbbTV test broadcasts, you can disable the Hbb TV function:
HbbTV (Hybrid broadcast broadcast TV) is a service offered by certain broadcasters and only available on certain digital television channels. HbbTV offers interactive television via broadband internet. These interactive functions are added to the normal digital programs and enrich the experience. These are services such as digital teletext, electronic TV guides, games, voices, specific information related to the current program, interactive advertisements, information magazines, programs later view back, etc. To use HbbTV, please make sure. before your TV is connected to the Internet and HbbTV is enabled.
You can enable your TV from standby in 5 seconds.
when on standby increase. 1. Press the remote, select System > Advanced settings > (System > Advanced settings > Immediate activation) and press OK. 2. Press ./▼ to On Select (to) and press to confirm OK.

E-Manual is an electronic user manual for the product. Here you will find instructions on the features of this TV.
Your TV is equipped with USB connectors so you can view images, listen to music or watch videos on a USB drive. When a USB device is connected, press the remote to display the source list. Press ./▼ to Media (Media) select and press OK to open the option.
Do not plug out the socket until the upgrade is complete. Press the remote control , select Support > Software update (Support > Software update) and press OK/► to open the option. You have the following options to update the software.
Supported file formats:
View JPEG, PNG, BMP Music/Audio Container: MP3, AVI, AC3, AAC, FLV, MKV Codec: MPEG1 layer 3, MPEG2 layer 2/3, AC 3, EAC3, Aac, LPCM Video Containers: AVI.MP4, TS, MQV, FLU Codec; MPEG1/2/4, H.263, H.264, H.265, VP8, VP9
-- By network: It allows you to use the
Download and install the latest software version over the internet. Make sure your wired or wireless network is set first and then select By Network (via network) and press OK/► to open the option. Follow the on-screen instructions to complete the process. NOTE: . .Keep the network connection in place
-- Some USB keys and usb products, such as
Digital cameras or mobile phones are not fully compatible with the USB standard, so they may not work with the TV media player. Not all USB drives or devices are compatible with the USB function. Not all the above formats are recognized. The encoding format of your files determines whether or not to play it. -- Use high-speed USB stations (minimum
during the upgrade. -- By channel: It allows you to use the
install the latest software version when it is available in the broadcast. Select By channel (via channel) and press OK/► to open the option. Follow the on-screen instructions to complete the process. -- By USB (via usb): This allows you to use the latest
5MB/s reading transfer).
Install software version via a USB stick. Place the USB stick that contains the new software version in a USB slot on TV. Select By USB (via usb) and press OK/► to open the option. Follow the on-screen instructions to complete the process.
This allows you to reset the TV set to factory settings.

Temperature 5°C - 35°C (41°F - 95°F) Humidity 20-75% (non-condensing)
-- The default password is 1234. You can use it in
Change a new password. -- The super password is 0423. If you are your code
Forgot, you can enter the super password to overwrite existing codes.
Temperature -15°C - 45°C (5°F - 113°F) Humidity 10-90% (non-condensing)
Check the following list before requesting service.
Please contact the nearest TCL office for requests and information about open source. This product uses the GPL (versions 2 and 3) and LGPL (release 2.1). This product uses a number of software programs that are distributed to the Independent JPEG Group. This product uses a number of software programs that are distributed under the libpng Project. This product uses a number of software programs that are distributed under the Freetype Project. This product uses a number of software programs that are distributed under the zlib Project. This product uses certain software programs (xml2, iniparser, curl, c-areas) these are distributed under the MIT. This product uses openssl, distributed under the OpenSSL and SSLeay Apache License Project. GPL software: Linux Kernel, uboot, busybox, mali, glib, cario, fontconfig, alsa-lib, libogg, harfbuzz, webkit LGPL software; DFB (DirectFB), gstreamer, libgcrypt, pango, en, mstreamer and iconv BSD software: chromium, freetype2 GNU software: dosfstools
[Legal Declaration] of TCL - manufacturer of this TV set
Due to the various possibilities of products with Smart TV services, as well as limitations in available content, certain features, applications and services may not be available on all devices or in any territory. Some functions on Smart TV may require additional peripherals to be purchased separately or a membership.

For more information about specific information on the device and availability of content, visit our website. Services and the availability of content via Smart TV are subject to change from time to time without prior notice.
DUE TO THE USE OF THE DEVICE, OR ANY CONTENT OR SERVICES ACCESSIBLE BY YOU OR THIRD PARTIES EVEN IF YOU ARE AWARE OF SUCH POSSIBLE DAMAGE.
Third party services may be modified, suspended, deleted, terminated or interrupted, or access may be disabled at any time without prior notice, and TCL does not guarantee that the content or services will remain available for a certain period. Content and services are transferred by third parties through networks of transmission facilities over which TCL has no control. Without limiting the generality of these terms and conditions, TCL expressly rejects any responsibility or liability for any modification, interruption, shutdown, deletion or suspension of any content or service made available through this apparatus. TCL may impose restrictions on the use or access to certain services or content, at any time and without notice or liability. TCL is not responsible or liable for the customer service regarding its content and services. If you have a question or request regarding the provision of content or services, please contact directly with the relevant owner of the contents and/or service providers.
All content and services accessible through this device are third-party property and protected by copyright, patent law, trademarks and/or other intellectual property rights. Such content and services are offered exclusively for your personal non-commercial use. It is not permitted to use any content or services in a manner that is not authorised by the owner of the content or service provider. Without limiting the foregoing, unless expressly authorised by the applicable owner of the content or service provider, you may not modify, copy, publish, upload, post, transmit, translate, sell any other work relating to this device in any way or with any means whatsoever.
YOU EXPLICITLY ACKNOWLEDGE AND AGREE THAT THE USE OF THE DEVICE IS ENTIRELY AT YOUR OWN RISK, AND THAT THE FULL RISK FOR GOOD QUALITY, PERFORMANCE AND ACCURACY IS ALSO ON YOUR RISK. THE APPARATUS AND ALL CONTENT AND SERVICES OF THIRD PARTIES ARE PROVIDED . . AS THEY ARE . WITHOUT ANY FORM OF WARRANTY, EITHER EXPRESS OR IMPLIED. TCL REJECTS ALL GUARANTEES RELATING TO THE APPARATUS AND ANY CONTENT OR SERVICES, WHETHER EXPLICIT OR IMPLIED, INCLUDING BUT NOT LIMITED TO, GUARANTEES OF MERCHANTABILITY, GOOD QUALITY, SUITABILITY FOR A PARTICULAR PURPOSE, ACCURACY, ENJOY UNDISTURBED AND NO BREACH OF THIRD PARTY RIGHTS. TCL DOES NOT GUARANTEE THE VALIDITY, TIMELINESS, LEGALITY, COMPLETENESS OF INFORMATION OR SERVICES MADE AVAILABLE THROUGH THIS DEVICE AND DOES NOT ENSURE THAT THE APPARATUS WITH CONTENT OR SERVICES MEETS YOUR REQUIREMENTS, OR THAT THE OPERATION OF THE DEVICE OR SERVICES WILL BE UNINTERRUPTED OR ERROR-FREE. IN NO CASE, INCLUDING NEGLIGENCE, SHALL THE LIABILITY BE INCURRED EITHER IN CONTRACT OR UNLAWFULLY FOR DIRECT, INDIRECT, INCIDENTAL, SPECIAL OR CONSEQUENTIAL DAMAGES, ATTORNEY'S FEES, OR ANY OTHER DAMAGE RESULTING FROM OR RELATED TO ANY INFORMATION CONTAINED IN, OR
Pages referenced in this manual — manufacturer, support and downloads.
Owners and our team usually reply within a day — and your question helps the next person too.
Be the first to ask — other owners or our team will answer.