Instruction/ maintenance manual of the product CWM7 Bowers & Wilkins
Go to page of 10
English C W M7.
2 www .bowers-wilkins.com Wel co me to B owe r s a nd Wi lk in s a n d t he CWM7 Se r ie s Th ank you for c ho osi ng B ower s & W il ki ns. W he n Jo hn B ower s r st e st abl is hed ou r co m.
3 www .bowers-wilkins.com 2. CWM7 Series Basics 1. CWM7 Carton Contents CWM7 Series in-wall speakers comprise a bafe carrying the speaker drivers and crossover , an integrated back-box and front ange, and a magnetically secured grille.
4 3. Positioning CWM7 Series Speakers All CWM7 Series speakers requir e a clear depth of 102mm (4.02 in) from the fr ont of the ceiling surface. Note: The CWM7.3 can also be used in landscape orientation with aperture dimensions of 251mm (9.9 in) by 711mm (28 in) respectively height by width.
5 4. Installing CWM7 Series Speakers T o install a CWM7 Series speaker proceed as described in the following paragraphs: 4.1 Using the supplied cut-out template, mark a cut line on the wall. Check the cut line denes the correct dimensions. Cut along the line with an appropriate tool to create an apertur e in the wall.
6 4.4 Now connect the speaker cable to the spring terminals on the side back box, rst looping the cable around the strain r elief bar . The diagram above illustrates cable connection.
7 4.7 The bafe can now be inserted into the back box. The bafe insertion and attachment technique is slightly differ ent in the case of the CWM7.3 and CWM7.4/5. In both cases however you should rst ensure that the connector on the bafe is oriented correctly with the connector inside the back box.
8 4.8 A port plug accessory is included with CWM7 Series speakers. The plug can be used if desired to reduce bass output by obstructing the speaker’ s reex port. Simply push the plug into the reex port. The diagram above illustrates insertion of the port plug.
9 4.9 The grille can now be tted to the bafe. It is held in place magnetically so simply needs to be aligned with the groove in the back box ange wher e it will click into place. The diagram above illustrates tting the grille. The CWM7 Series speaker is now installed and ready for use.
Copyright © B&W Group Ltd. E&OE Issue1 B&W Group Ltd Dale Road Worthing West Sussex BN11 2BH England T +44 (0) 1903 22 1 800 F +44 (0) 1903 22 1 801 info@bwgroup.com www .bowers-wilkins.com B&W Group (UK Sales) T +44 (0) 1903 221 500 E uksales@bwgroup.
An important point after buying a device Bowers & Wilkins CWM7 (or even before the purchase) is to read its user manual. We should do this for several simple reasons:
If you have not bought Bowers & Wilkins CWM7 yet, this is a good time to familiarize yourself with the basic data on the product. First of all view first pages of the manual, you can find above. You should find there the most important technical data Bowers & Wilkins CWM7 - thus you can check whether the hardware meets your expectations. When delving into next pages of the user manual, Bowers & Wilkins CWM7 you will learn all the available features of the product, as well as information on its operation. The information that you get Bowers & Wilkins CWM7 will certainly help you make a decision on the purchase.
If you already are a holder of Bowers & Wilkins CWM7, but have not read the manual yet, you should do it for the reasons described above. You will learn then if you properly used the available features, and whether you have not made any mistakes, which can shorten the lifetime Bowers & Wilkins CWM7.
However, one of the most important roles played by the user manual is to help in solving problems with Bowers & Wilkins CWM7. Almost always you will find there Troubleshooting, which are the most frequently occurring failures and malfunctions of the device Bowers & Wilkins CWM7 along with tips on how to solve them. Even if you fail to solve the problem, the manual will show you a further procedure – contact to the customer service center or the nearest service center
