Instruction/ maintenance manual of the product 803D Bowers & Wilkins
Go to page of 10
SPINE 800 Series 803S 804S 805S SCMS HTM3S HTM4S DS8 800D 801D 802D 803D HTM1D HTM2D Copyright © B&W Group Ltd. E & OE Rohacell is a registered trademark of Rohm GmbH Kevlar is a registered trademark of DuPont. Printed in England. B&W Gr oup (UK Sales) T +44 1903 221 500 E uksales@bwgroup.
Glue Area Owner details Title, first name, sur name Address T own, postcode, country e-mail address Product details Model Serial number Date of purchase Dealer details Dealer name Address T own, postcode, country e-mail address Dealer stamp Contents English Limited W arranty.
Glue Area + + + + Figure 19 Figure 20 Figure 21 FIgure 22 Figure 23 Figure 24 Figure 25a Figure 25b + + + + Figure 26 Figure 27 Figure 28 Figure 29 Figure 30 Figure 31 Figure 32 Figure 33 Figure 34 Fi.
1 English Limited W arranty Dear customer , Welcome to B&W . This product has been designed and manufactured to the highest quality standards. However , if something does go wrong with this produc.
2 help the perception of the central image for any listeners sitting away from the centre line of the installation. (figure 3) If you are also using the speakers for movies, you should try to match the audio image to the size of the screen. That generally means that the speakers should be closer together .
3 Use the bottom switch on the front baffle when selecting between monopole and dipole modes. In the • position, the speaker defaults to monopole. (figure 8) However , if a 12V signal is applied to the trigger input, internal relays switch to dipole mode.
4 Screw in the feet with locking ring attached, with either the spikes or rubber tips outermost, according to the type of floor surface. Leave the tips of the feet protruding beyond the inner packing pieces for clearance when the speaker is upright.
5 4 CONNECTIONS All connections should be made with the equipment switched off. The terminals accept a variety of cable terminations to suit most applications – 4mm banana plugs, 6mm and 8mm (1/4 in and 5/16 in) spades, or bare wires up to 6mm (1/4 in) diameter .
6 5 FINE TUNING Before fine tuning, double check that all the connections in the installation are correct and secure. Floor - and stand-mount speakers only Moving the speakers further from the walls will reduce the general level of bass. Space behind the speakers also helps to create an impression of depth.
7 gripping round the edges and gently pulling them away from the cabinet. Spray onto the cleaning cloth, not directly onto the cabinet. The grille fabric may be cleaned with a normal clothes brush whilst the grille is detached from the cabinet.
An important point after buying a device Bowers & Wilkins 803D (or even before the purchase) is to read its user manual. We should do this for several simple reasons:
If you have not bought Bowers & Wilkins 803D yet, this is a good time to familiarize yourself with the basic data on the product. First of all view first pages of the manual, you can find above. You should find there the most important technical data Bowers & Wilkins 803D - thus you can check whether the hardware meets your expectations. When delving into next pages of the user manual, Bowers & Wilkins 803D you will learn all the available features of the product, as well as information on its operation. The information that you get Bowers & Wilkins 803D will certainly help you make a decision on the purchase.
If you already are a holder of Bowers & Wilkins 803D, but have not read the manual yet, you should do it for the reasons described above. You will learn then if you properly used the available features, and whether you have not made any mistakes, which can shorten the lifetime Bowers & Wilkins 803D.
However, one of the most important roles played by the user manual is to help in solving problems with Bowers & Wilkins 803D. Almost always you will find there Troubleshooting, which are the most frequently occurring failures and malfunctions of the device Bowers & Wilkins 803D along with tips on how to solve them. Even if you fail to solve the problem, the manual will show you a further procedure – contact to the customer service center or the nearest service center
