Instruction/ maintenance manual of the product 202 Bounty Hunter
Go to page of 20
OWNER’S MANUAL Y our Pioneer 202 Metal Detector incorporates patented microprocessor- controlled technology . The Pioneer 202 is a motion detector; movement over an object is required in order for the machine to detect the object and emit a tone. Alternatively , you can sweep a metal object over a motionless search coil.
2 INTRODUCTION Y our Pioneer 202 is an advanced technology metal detector , designed for a variety of applications including coinshooting, relic hunting, and general purpose detecting. Before using your Pioneer 202, it is important to read these instructions.
3 T ABLE OF CONTENTS ASSEMBL Y . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .4 S-Rod Assembly . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .4 Mounting the Coil . . . . . . . . . . . . . . .
4 EASY ASSEMBL Y Search Coil Search Coil Cable Upper Stem Control Housing Plug Lower Stem Assembling your Pioneer 202 Metal Detector is easy and requires no tools. Just follow these steps: ● 1 Using the supplied bolt and knurled knob, attach the search coil to the lower stem.
5 BA TTERIES IMPORT ANT : Always use ALKALINE batteries for optimal performance. Always remove the batteries for prolonged storage. CHECK THE BA TTERIES if your detector exhibits any of the following symptoms: ● 1 The unit does not turn on. ● 2 Low speaker volume.
6 PIONEER 202 DEMONSTRA TION Here is a quick way to demonstrate the basic features of your PIONEER 202. I. Supplies Needed • A quarter (25¢) • A penny (1¢) • A dime (10¢) • A nickel (5¢) • Small piece of aluminum foil • A nail II.
7 TURNING ON YOUR DETECTOR T urn the left knob (SENSITIVITY) to the right. As the knob clicks to the "On" position, the detector sounds three beeps, the LCD arrows appear momentarily , and the unit pre-sets to the DISC/ALL MET AL mode of operation.
8 LCD T ARGET DISPLA Y READING THE DISPLA Y The Liquid Crystal Display (LCD) shows the PROBABLE identification of the targeted metal, as well as the PROBABLE depth of the target, in inches. Pass the search coil repeatedly over a target, and observe the target readout.
9 BA TTER Y & DEPTH INDICA TORS The LOW BA TT indicator will flash as the unit is powered on. If the indicator comes on and stays on, replace the batteries. DEPTH INDICA TOR: The Depth Indicator is accurate for coin-sized objects. It indicates the depth of the target, in inches.
10 SENSITIVITY ADJUSTMENT The principle use for the SENSITIVITY knob is to eliminate ELECTROMAGNETIC INTERFERENCE (EMI). EMI is both naturally-occurring and man-made. Common sources of EMI are power lines, both suspended and buried, and broadcasting antennas.
ALL MET AL MODE: There are two ways to enter the ALL-MET AL mode. 1) T urn the right knob (Disc/Notch) left to the furthest counterclockwise position. Then Press the Disc/All Metal touch pad. or 2) T urn the right knob (Disc/Notch) left to the furthest counterclockwise position.
12 MODES OF OPERA TION AUTO NOTCH T OUCHP AD IRON 5¢ PT AB SCAP ZINC 10¢ 25¢ 50¢ 1¢ SELECTIVEL Y “NOTCH OUT” THESE NOTCH then gives the user a variable rejection window .
13 AUDIO T ARGET ID Depending on the operating mode and Disc/Notch control setting, the Pioneer 202 emits three distinct tones which classify metal objects into categories. IRON & STEEL: In the DISCRIMINA TION mode most iron and steel objects will induce a low tone.
14 IN THE FIELD TECHNIQUES When pinpointing a target, try drawing an “X”, as illustrated, over where the tone is induced. PINPOINTING Accurate pinpointing takes practice and is best accomplished by “X-ing” the target area.
15 IN THE FIELD TECHNIQUES After selecting your operating mode, swing the search coil gently side-to- si d e, s li g ht l y overlapping each sweep as you move forward. Make sure you keep your search coil approximately 1 inch above the ground as you search.
16 MET AL DETECTING APPLICA TIONS COINSHOOTING: The most popular metal detecting application. When coinshooting, you want to discriminate out pull tabs, screw caps, and iron objects. Beware that highly oxidized steel may also be detected. Control settings required.
ACCESSORIES MAXIMIZE YOUR METAL DETECTING EXPERIENCE WITH THESE OPTIMAL BOUNTY HUNTER ACCESSORIES 10 INCH COIL For maximum depth detection. 4 INCH COIL Great for searching in trashy areas with its smaller target area. Also perfect for gold prospecting and fitting into tight spaces.
18 TROUBLESHOOTING TROUBLE SHOOTING GUIDE SYMPTOM CAUSE SOLUTION Detector chatters • Using detector • Use detector or beeps erratically indoors outdoors only • Using detector near • Move away .
19 CARE AND MAINTENANCE Y our Pioneer 202 Metal Detector is an example of superior design and craftsmanship. The following suggestions will help you care for your metal detector so you can enjoy it for years to come. Handle the metal detector carefully .
TREASURE HUNTER’S CODE OF ETHICS: • Always check Federal, State, County and local laws before searching. • Respect private property and do not enter private property without the owner’ s permission. • T ake care to refill all holes and try not to leave any damage.
An important point after buying a device Bounty Hunter 202 (or even before the purchase) is to read its user manual. We should do this for several simple reasons:
If you have not bought Bounty Hunter 202 yet, this is a good time to familiarize yourself with the basic data on the product. First of all view first pages of the manual, you can find above. You should find there the most important technical data Bounty Hunter 202 - thus you can check whether the hardware meets your expectations. When delving into next pages of the user manual, Bounty Hunter 202 you will learn all the available features of the product, as well as information on its operation. The information that you get Bounty Hunter 202 will certainly help you make a decision on the purchase.
If you already are a holder of Bounty Hunter 202, but have not read the manual yet, you should do it for the reasons described above. You will learn then if you properly used the available features, and whether you have not made any mistakes, which can shorten the lifetime Bounty Hunter 202.
However, one of the most important roles played by the user manual is to help in solving problems with Bounty Hunter 202. Almost always you will find there Troubleshooting, which are the most frequently occurring failures and malfunctions of the device Bounty Hunter 202 along with tips on how to solve them. Even if you fail to solve the problem, the manual will show you a further procedure – contact to the customer service center or the nearest service center
