Instruction/ maintenance manual of the product VR1 Boston Acoustics
Go to page of 8
VR1, VR2 VR3, VRC High Performance Home Theater Loudspeakers VRC VR1 VR1, VR2, VR3 VRB, VRC.
2 Description The VR1, VR2, and VR3 compact fl oorstanding speaker systems and the VRB compact bookshelf speaker system deliver the kind of power ful, impr essive sound usually associated only with much lar ger , mor e expensive speakers.
3 How to Connect Y our Speakers Correctly wiring your speakers is important for achieving the best sound quality . Wiring should take just a few minutes, but it’ s important to do it car efully , since incorrect wiring (such as r eversed connections) can result in a poor soundstage and poor bass.
4 VR1/VRB VR2 or VR3 Speaker terminal jumper straps in place VRC surround sound receiver or amplifier left front center front right front Basic Hookup 1. Connect the speaker terminals to the amplifier speaker outputs. 2. Make sure the speaker terminal jumper straps ar e in place on the back of the speaker .
5 Bi-amplification (VR2 and VR3 only) Bi-amplification requir es using separate amplifiers dedicated to high and low frequencies. Using mor e than one amplifier can enhance the dynamic performance of your system.
6 How to Place Y our Speakers The VR speakers wer e designed to deliver exceptional bass extension and tonal balance, r egardless of wher e they are placed. However , for optimal results, it is advisable to position the r ear of the speaker to be at least 3 inches (76mm) away from the wall o r curt ains t hat are be hind i t.
7 or Using the Carpet Spikes For placing speakers on thick carpet, we recommend using the four thr eaded carpet spikes and lock nuts (VR2 and VR3 only) which serve three purposes — leveling (an aesthetic issue), stability (a practical issue) and rigidity (an acoustic issue).
300 J ubilee Drive P eabody , MA 01 960 USA 978.538.5000 AMD is a trademark and DCD, VR, MagnaGuard, Boston, and Boston Acoustics are r egistered trademarks of Boston Acoustics, Inc. © 2004 Boston Acoustics, Inc. All rights r eser ved. Specifications subject to change without notice.
An important point after buying a device Boston Acoustics VR1 (or even before the purchase) is to read its user manual. We should do this for several simple reasons:
If you have not bought Boston Acoustics VR1 yet, this is a good time to familiarize yourself with the basic data on the product. First of all view first pages of the manual, you can find above. You should find there the most important technical data Boston Acoustics VR1 - thus you can check whether the hardware meets your expectations. When delving into next pages of the user manual, Boston Acoustics VR1 you will learn all the available features of the product, as well as information on its operation. The information that you get Boston Acoustics VR1 will certainly help you make a decision on the purchase.
If you already are a holder of Boston Acoustics VR1, but have not read the manual yet, you should do it for the reasons described above. You will learn then if you properly used the available features, and whether you have not made any mistakes, which can shorten the lifetime Boston Acoustics VR1.
However, one of the most important roles played by the user manual is to help in solving problems with Boston Acoustics VR1. Almost always you will find there Troubleshooting, which are the most frequently occurring failures and malfunctions of the device Boston Acoustics VR1 along with tips on how to solve them. Even if you fail to solve the problem, the manual will show you a further procedure – contact to the customer service center or the nearest service center
