Instruction/ maintenance manual of the product RX47 Boston Acoustics
Go to page of 16
RX47 RX57 RX57 DIN RX67 RX67 DIN RX87 RX97 Boston Rally ® Series Coaxial Speaker Systems Installation Instructions.
Specifications RX97 RX87 RX67 RX67DIN RX57 RX57DIN RX47 Nominal Size (woofer) 6 x 9” 5 x 7” 6 1 ⁄ 2 ”6 1 ⁄ 2 ”5 1 ⁄ 4 ”5 1 ⁄ 4 ”4 ” (160mm) (165mm DIN) (130mm) (130mm DIN) (100mm.
T able of Contents T ools Required 2 Before Y ou Begin 2 Planning the Installation 3 Speaker Wiring 4 Installing Speakers in Factory Cutouts 5 Installing Speakers in Nonstandard Locations 8 RX47/RX57/.
T ools Required These are the tools r equired to complete the basic installa- tion of the Boston Rally Series components. Additional tools are necessary for mor e cus- tom work. 1. Electric drill with 1 / 8 ” (3mm) and 1 / 4 ” (6mm) bits 2. Phillips screwdriver 3.
Planning the Installation Read all instructions carefully befor e you attempt any installation procedur es. Make sure all operations ar e clear to you. Make sure you have adequate time and shelter to complete the installation. Many installations requir e multiple days to complete.
4 Speaker Wiring For your convenience, two sets of two-conductor wire ar e provided to use between the speakers and the amplifier or head-unit. Other wire may be substituted if desired as long as it is at least 18 gauge.
Installing Speakers in Factory Cutouts 1. Make sure the mounting surface pr ovides a complete air seal between the front and the back of the speaker . If the surface is uneven, or if air can leak directly from the back of the speaker to the fr ont, seal the air leaks with silicon sealant or weather stripping.
6 RX67/RX67DIN Mounting Screw Locations Factory speaker locations for 6-inch (160mm & 165mm) speakers provide various scr ew holes for mounting the speaker . The RX67 and RX67DIN include several different sets of holes. Rotate the speaker until the corr ect holes line up.
7 RX87 and RX97 Installation Option The RX87 and RX97 can also be installed from underneath the r ear deck to reduce the installed height of the tweeter module. A spacer is sup- plied with these speakers to protect the rubber surr ound. The spacer is installed between the speaker and the mounting surface as shown in the diagram.
8 Installing Speakers In Nonstandard Locations Check the clearance of both speaker locations. Y our vehicle may not be symmetrical. (There may be multiple window contr ols on the driver ’ s side, for example.) If installing in the doors, remove the interior panel.
9 1. T race the template onto the mounting panel. Mark the pilot hole, the edges of the large cutout and the locations of the scr ews. 2. Make sure that the mounting surface pr ovides a complete air seal between the front and the back of the speaker .
RX47/RX57/RX67 3. Drill the pilot hole at the center of the cutout, then drill four 1 / 8 ” holes for the speaker ’ s mounting screws. Make the lar ge circular cutout with a saber saw , hole saw or nibbler (depending on the material). 4. Slip “ U ” -clips over the screw holes.
RX87/RX97 3. Drill four 1 / 4 ” holes for the speaker ’ s mounting screws. Make the lar ge elliptical cutout with a saber saw or nibbler (depending on the material). 4. Attach the assembly to the cutout as shown in the diagram. Use the supplied machine screws and nuts or other hardwar e.
12 Professional Tips • Some installers construct mounting surfaces from MDF . This dense material dampens resonances and pr ovides a rigid mounting surface.
13 Adding Subwoofers and Electronic Cr ossovers The best way to combine a subwoofer with your Boston Rally Series speaker system is with an electronic cr ossover . Level matching (making the subwoofer play at the same level as the coaxial system) and precise frequency division ar e much easier to get right with an electronic crossover .
Limited W arranty For one year from the date of pur chase, Boston Acoustics will repair for the original owner any defect in materials or workmanship that occurs in normal use, without charge for parts or labor .
An important point after buying a device Boston Acoustics RX47 (or even before the purchase) is to read its user manual. We should do this for several simple reasons:
If you have not bought Boston Acoustics RX47 yet, this is a good time to familiarize yourself with the basic data on the product. First of all view first pages of the manual, you can find above. You should find there the most important technical data Boston Acoustics RX47 - thus you can check whether the hardware meets your expectations. When delving into next pages of the user manual, Boston Acoustics RX47 you will learn all the available features of the product, as well as information on its operation. The information that you get Boston Acoustics RX47 will certainly help you make a decision on the purchase.
If you already are a holder of Boston Acoustics RX47, but have not read the manual yet, you should do it for the reasons described above. You will learn then if you properly used the available features, and whether you have not made any mistakes, which can shorten the lifetime Boston Acoustics RX47.
However, one of the most important roles played by the user manual is to help in solving problems with Boston Acoustics RX47. Almost always you will find there Troubleshooting, which are the most frequently occurring failures and malfunctions of the device Boston Acoustics RX47 along with tips on how to solve them. Even if you fail to solve the problem, the manual will show you a further procedure – contact to the customer service center or the nearest service center
