Instruction/ maintenance manual of the product 520 Bose
Go to page of 22
LIFESTYLE ® 535/525 series II home enter tainment systems LIFESTYLE ® 520/510 home theater systems Setup Guide | Guía de instalación | Guide d’installation.
Safety Information 2 - English Please read this guide Please take the time to follow the instructions in this owner ’s guide carefully . It will help you set up and operate your system properly and enjoy its advanced features. Please save this guide for future reference.
Safety Information English - 3 NOTES: • The product label is located on the bottom or the back of the product. • Where the mains plug or appliance coupler is used as the disconnect device, such disconnect device shall remain readily operable. • The product must be used indoors.
Safety Information 4 - English Important Safety Instructions 1. Read these instructions. 2. Keep these instructions. 3. Heed all warnings. 4. Follow all instructions. 5. Do not use this apparatus near water . 6. Clean only with a dry cloth. 7. Do not block any ventilation openings.
English - 5 Contents Welcome ank Y ou ............................................................................................................ 6 Unpacking .........................................................................................
6 - English Welcome ank Y ou Thank you for choosing a Bose ® LIFESTYLE ® system for your home. This guide provides step-by-step instructions for setting up your new system. Ther e are two phases to the setup process: Physical setup phase: Placing the system components and connecting them together .
English - 7 System Setup 1 1 Control console box What you need from box 1: What you need from the power cor d box: A. Place the control console on a flat, stable surface near your TV .
System Setup 8 - English B. Plug one end of the HDMI ® cable into an HDMI INPUT connector on your TV . If an HDMI cable is already connected to an HDMI input on your TV , you can use this one.
System Setup English - 9 D. Plug one end of the audio input cable into the contr ol console connector labeled Audio OUT . Make sure the flat surface with the arr ow on the plug faces up. Leave the other end of the cable on the floor . Y ou will be asked to connect it while setting up the contents of the next box.
System Setup 10 - English 2 Acoustimass ® module box What you need for the following steps: A. Place the Acoustimass module on the floor at the same end of the room as the TV . Make sure there is a live AC (mains) power outlet nearby . Acoustimass module B.
System Setup English - 11 CAUTION: DO NOT stand the Acoustimass ® module on its front or back end. C. Plug the free end of the audio input cable into the Media Center connector on the Acoustimass module. Make sure the flat surface with the arr ow faces the front of the module.
System Setup 12 - English 3 Speaker box What you need for the following steps: System speakers (one set of the three types shown) Jewel Cube ® speakers (4) Left or right, front or rear speaker (1) Ce.
System Setup English - 13 A. Place the center front speaker on a stable and level surface dir ectly above or below the center of your TV screen as in the following example. Left front (L) Right front (R) Center front (C) B. Place one speaker to the left and one to the right of the TV .
System Setup 14 - English C. Place the rear speakers toward the back of the r oom behind the viewers at ear height (when seated) or higher , if possible. Left rear (LR) Right rear (RR) – Make sure the 50 ft (15.2 m) r ear speaker cables will reach fr om the speak- ers to the Acoustimass ® module.
System Setup English - 15 F. Locate the speaker position markings on the free ends of the speaker cables. Speaker position marking (L, C, R, LR, or RR) G. Using the speaker position markings, run each cable out to its respective speaker as in the following setup example of a room.
System Setup 16 - English H. Connect the speaker cable to the type of speaker you have. For Jewel Cube ® speakers: Insert the plug into the speaker connector . For Direct/Reflecting ® and Virtually Invisible ® single cube speakers: Press the button and insert the wir es.
System Setup English - 17 4 Interactive box What you need for the following steps: Remote control with batteries ADAPTiQ ® audio calibration headset IMPORT ANT! Before you start, make sur e your speakers and Acoustimass ® module are in their final positions.
System Setup 18 - English D. Press the power button on the control console to turn on your system. Because the system is in a low power state when in standby , it takes several seconds to start. When the system status indicator changes from blinking to steady gr een, your system is ready to use.
System Setup English - 19 Other Box 4 items The remaining items in Box 4 may or may not be r equired to set up your LIFESTYLE ® system. For more information on using these accessories or adding other devices to your system at another time, see the operating guide.
System Setup 20 - English Applying rubber feet When placing the Acoustimass ® module on bare floors, you can attach the included rubber feet to the bottom of the module for greater stability and to protect your floor .
System Setup English - 21 If y ou have setup problems If you experience any difficulties during the setup process, such as an unr ecog- nized device remote or a connection err or , you can reactivate the interactive setup mode at any time and correct or change part of your system setup.
©2013 Bose Corporation, The Mountain, Framingham, MA 01701-9168 USA AM372631_00 Rev . 00.
An important point after buying a device Bose 520 (or even before the purchase) is to read its user manual. We should do this for several simple reasons:
If you have not bought Bose 520 yet, this is a good time to familiarize yourself with the basic data on the product. First of all view first pages of the manual, you can find above. You should find there the most important technical data Bose 520 - thus you can check whether the hardware meets your expectations. When delving into next pages of the user manual, Bose 520 you will learn all the available features of the product, as well as information on its operation. The information that you get Bose 520 will certainly help you make a decision on the purchase.
If you already are a holder of Bose 520, but have not read the manual yet, you should do it for the reasons described above. You will learn then if you properly used the available features, and whether you have not made any mistakes, which can shorten the lifetime Bose 520.
However, one of the most important roles played by the user manual is to help in solving problems with Bose 520. Almost always you will find there Troubleshooting, which are the most frequently occurring failures and malfunctions of the device Bose 520 along with tips on how to solve them. Even if you fail to solve the problem, the manual will show you a further procedure – contact to the customer service center or the nearest service center
