EN
Official user manual

Pointer Eguna N7

16 pages·3 MB·Bicycle E-bike·PDF·ENDEFRITNLJA
Pointer Eguna N7
Table of Contents 16 sections 1.pdf · 2.pdf · 3.pdf · 4.pdf · … ShowHide
Page 1 of the Pointer Eguna N7 user manual — Type of LCD-2 operation
Page 1 · click to enlarge
Page 1
Pointer Eguna N7 — 1.pdf diagram (page 1)
Fig. 1 · 1.pdf

User manual for E-Bikes:

City R3 Eguna N7 E.forta N3.L and N7.L E.forta Unica N7E.fortas Step In N7

including warranty, service and assembly requirements

Type of LCD-2 operation

Pointer Eguna N7 — Type of LCD-2 operation diagram (page 1)
Fig. 2 · Type of LCD-2 operation
Page 2 of the Pointer Eguna N7 user manual — 2.pdf
Page 2 · click to enlarge
Page 2

Contents page 1 Introduction 3 2 Product description 3 2.1 Frame number 4 3 Function and adjustment options 4 3.1 Contact lock 4 3.2 Driving with active power support 5 3.3 Gearing 5 3.4 Control display 6 3.5 Battery indicator (power) 6 3.6 Diagnosis alerts 6 3.7 Explanation 7 4 Steering device 8 4.1 Seat setting 8 4.2 Battery 8 4.3 Connection of the charger 9 5 Traffic use 9 6 Insurance 9 7 Loading and charging 10 7.1 Loading progress 11 7.2 Winter storage 12 7.3 Warnings 12 7.4 Malfunctions 12 8 Warranty 13 8.1 Conditions 13 8.2 Service requirements 13 8.3 Warranties 14 9 Assembly rules 15 10 Technical specifications 16

Page 3 of the Pointer Eguna N7 user manual — 3.pdf
Page 3 · click to enlarge
Page 3

1 Introduction Have fun with your Pointer electric bike. The Pointer E-Bikes belong to a new generation of bicycles with electric pedal support. Designed and

developed by Pointer Rijwielen B.V., based on years of experience in the construction of bicycles. The Pointer E-Bikes are equipped with the latest technology. Constant quality control in combination with the processing of selected components guarantees a high-quality end product. Before you use the bicycle, we recommend that you read this manual. This booklet contains our warranty, service and

Pointer Eguna N7 — 3.pdf diagram (page 3)
Fig. 3 · 3.pdf

assembly instructions. All in all, a row of important notes for the use and care of the bike. For any questions, our dealer is here to help you. 2 Product description Behind the innovative and elegant design of the Pointer E-Bike, a powerful electric bike is hiding. The combination of excellent driving characteristics and low net weight gives the maximum possible riding pleasure on flat roads and in hilly areas. The aluminium frame gives high stability and low net weight. To achieve a good weight distribution and to be able to drive optimally, the engine is

Pointer Eguna N7 — 3.pdf diagram (page 3)
Fig. 4 · 3.pdf

integrated into the front wheel. Once the support system is activated, the rear light will be lit. This is an important control function on the control system. This also increases the visibility of users in traffic. The rear lamp cannot be switched off separately. This guide is intended for the models with LCD Control display.

Pointer Eguna N7 — 3.pdf diagram (page 3)
Fig. 5 · 3.pdf
Page 4 of the Pointer Eguna N7 user manual — 4.pdf
Page 4 · click to enlarge
Page 4
Pointer Eguna N7 — 4.pdf diagram (page 4)
Fig. 6 · 4.pdf

The 36V/DC hub motor with planetary gear system offers optimal power support due to the high torque. Also with headwind and steep slopes. The 3 or 7 gears make it possible to adjust optimally according to personal preference. 2.1 Frame number The individual frame number is located in the frame below the trap axis. In some models, the number is placed in the saddle pipe at the lock. Please enter this number on your guarantee card. 3 Function and setting options 3.1 Contact lock To control the electrical system, the ignition key on the battery must be switched on. The ignition key is the system's main switch.

Pointer Eguna N7 — 4.pdf diagram (page 4)
Fig. 7 · 4.pdf

Key position · Contact Lock

Page 5 of the Pointer Eguna N7 user manual — 5.pdf
Page 5 · click to enlarge
Page 5

3.2 Driving with active power support Operation: A sensor records the active use on the pedals and switches on or off electronic control of the engine. - Step forward is on. Kicking out is off. The support is stopped when braking with the Hand brake and, where applicable, the Retractor brake. By setting the control display, your engine power is adjusted to suit your personal preference. Advice: first make speed and then turn on the support. Start in a low or middle setting for good habitation. Check the correct settings at all times when you are using them. For the staircase support use a low or middle setting (1-3) when moving up a steep slope. Adjust the setting of your gear to a low or midset. When you drive off a slope, you have to cycle without using the extra drive. So switch off engine on descents. Kicking out is off. If the pedals do not rotate sufficiently actively, electric control automatically switches off the engine. The same applies if you reach a speed of 25 km/h or higher. If you do not use the pedal support, cycling on the Pointer E-Bike is comparable to a bike without electric stair support. You will not experience any resistance from the engine thanks to the freewheel system. 3.3 Accelerations The gears are located on the right side of the steering wheel. By turning the switch handle, you change the gear to your personal choice. Adjust the acceleration to your speed. Please note: Never start in a high gear, always in a middle or lower set gear.

Pointer Eguna N7 — 5.pdf diagram (page 5)
Fig. 8 · 5.pdf
Page 6 of the Pointer Eguna N7 user manual — 6.pdf
Page 6 · click to enlarge
Page 6

3.4 Control Display

Pointer Eguna N7 — 6.pdf diagram (page 6)
Fig. 9 · 6.pdf

3.5 Power indicator In case of a full battery, 4 cubes burn up at 75% capacity 3 blocks burn up, with 50% capacity 2 cubes burn down, with 25% capacity 1 block burns. Please note, the battery will reach its lowest capacity and must be charged. 3.6 Diagnostic notifications

Pointer Eguna N7 — 6.pdf diagram (page 6)
Fig. 10 · 6.pdf
Page 7 of the Pointer Eguna N7 user manual — 7.pdf
Page 7 · click to enlarge
Page 7

3.7 Explanation of operation The driver decides when he wants the engine to be supported by means of the control display. Explanation symbols operating display:

Pointer Eguna N7 — 7.pdf diagram (page 7)
Fig. 11 · 7.pdf
Pointer Eguna N7 — 7.pdf diagram (page 7)
Fig. 12 · 7.pdf
Page 8 of the Pointer Eguna N7 user manual — 8.pdf
Page 8 · click to enlarge
Page 8
Pointer Eguna N7 — 8.pdf diagram (page 8)
Fig. 13 · 8.pdf

By pushing the lock button down and pushing the tensioner upwards, you can set the handlebar horizontally in your desired position. The horizontal height setting is done without additional tools. Important: after setting check that the tensioner and lock button are in position again. Please note: only set at standstill and not while driving. This is for your own safety. The above option depends on the model E-Bike. 4.1 Saddle setting By unscrewing the bolt attached to the saddle pipe clamp with a bus key, you can place the saddle in your desired position. The seat angle of the saddle can be adjusted by unlocking and adjusting the nut on the right under the saddle deck with an appropriate stitch wrench. After correct adjustment, tighten the nuts and bolts correctly. This is for your own safety. 4.2 Battery take-out By turning the key in Off position, the battery is unlocked and can be pulled out backwards. You can put the battery back in the sled and then lock it with the key. During these operations press the key lightly into the ignition lock.

Pointer Eguna N7 — 8.pdf diagram (page 8)
Fig. 14 · 8.pdf
Pointer Eguna N7 — 8.pdf diagram (page 8)
Fig. 15 · 8.pdf

Lock button 4 Steering setting · Key position unlocking · Key position lock

Page 9 of the Pointer Eguna N7 user manual — 9.pdf
Page 9 · click to enlarge
Page 9

4.3 Connection of the charger Load the battery only with the included charger. Insert the round plug into the battery charging input and then connect to the power outlet. After charging, disconnect the battery in reverse order. Important: Always connect the mains voltage and first off the power supply. This prevents damage to the electrical system. The battery can be charged to the bike, but you can also take out the battery and charge it in another place indoors. Use only the supplied charger: model ACK42(1). Read point 7 charger and charging for a good explanation and description. 5 Use in traffic The Pointer wheel with electric pedal support meets the CE Standard. It is checked by EU Directive EN 15194 and EMC standard. An admission, certificate or licence is not currently necessary for the use of the Pointer E-Bike. The user's behaviour in public traffic must correspond to the behaviour of a cyclist on a bicycle without additional drive. The use of a bicycle helmet is not mandatory but safer. 6 Insurance A bicycle with electric pedal support is equivalent to a standard bike. For your E-Bike you can take out a bicycle insurance against theft and damage. Please contact your dealer or insurer for this.

Pointer Eguna N7 — 9.pdf diagram (page 9)
Fig. 16 · 9.pdf
Page 10 of the Pointer Eguna N7 user manual — 10.pdf
Page 10 · click to enlarge
Page 10

7 Loader and Charger

Pointer Eguna N7 — 10.pdf diagram (page 10)
Fig. 17 · 10.pdf

Use of the charger:

Pointer Eguna N7 — 10.pdf diagram (page 10)
Fig. 18 · 10.pdf
ModelACK42(1)

Perform these actions in the following order:

1. Turn the key into the battery ignition lock in Off position 2. Connect the round connector of the charger to the battery (see 4.3) 3. Insert the plug into the socket o The light of the charger burns red o After charging, the battery is lit green 4. Remove the plug from the socket 5. Disconnect the battery After these operations, your battery is ready for use.

Key position lock

Page 11 of the Pointer Eguna N7 user manual — 11.pdf
Page 11 · click to enlarge
Page 11

7.1 Load progress The Pointer E-Bike has a maintenance free Li-ION battery. The battery is delivered in a charge state of 40%. The battery must be fully charged for the first ride by bike. To achieve the maximum performance of the battery, it is recommended to charge the battery in a room with room temperature. At an ambient temperature below 20oC in the room where the charge is being made, the battery does not have maximum performance. At a temperature of 0oC the battery has a performance capacity of 50% of its total capacity. This has considerably reduced the range of action. During the charging progress, do not place the battery in sunlight to prevent overheating. Preferably keep the battery at room temperature. Please note that it cannot lead to condensation in and around the battery. Loading only starts after the battery has adjusted to ambient temperature. The battery has a BMS sensor, which controls the sensor during charging each cell. Condensation moisture in the battery can influence the sensor during charging. Li-ION battery lifers have no memory effect. So it is not necessary that you have to recharge the battery after a short drive, it is allowed. Regular charging extends the life of the Li-ION battery. Keep the battery (charged) dry. When removing the charging cables from the battery of the charge contact, not pull the cable but hold it by the plug. After charging, separate the charger from the net and then separate it from the battery. If the bicycle is not used for a longer period, take away its battery and keep it at room temperature. It is reasonable to assume that the battery capacity will decrease over time. The battery has a life of approx. 600 charging cycles. Drive on with an empty battery causes deep discharge and destroys the battery. WATCH THE BATTERY INDICATOR.

Page 12 of the Pointer Eguna N7 user manual — 12.pdf
Page 12 · click to enlarge
Page 12

Conditions such as user weight, surface to be ridden and weather conditions may influence the range of action. The subsurface and tyre pressure combined with the frequency and intensity of engine drive use also influence the range. 7.2 Winter storage If the bicycle is not used over a longer period, it must be loaded at least once in the month. We recommend that you take the battery off and keep it at room temperature. Keep tyres on the right tension. 7.3 Warnings

Do not heat the battery or cause a short circuit Never open the battery Keeping it in or out of open fire Don't keep the battery watered or any other liquid soaking When charging the battery only use the supplied charger The battery doesn't recharge at temperatures below 0° C or above 45° C If you stop on long periods, charge the battery once a month High setting and load reduces the range 7.4 Malfunctions

MalfunctionCauseSolution The battery meter is coloured, but no engine performanceLoad plug still in the batteryRemove charger from battery The battery indicator is not workingContact key in OFF mode Battery fuse fault Battery is emptyReplace fuse contact key in ON position Charge battery The bike is too slowA low tyre pressureTyre pumps Too low powerTyre pressure too low Brakes too tight Battery out of datePump tyres Adjusting brake settings Battery replacement
Page 13 of the Pointer Eguna N7 user manual — 13.pdf
Page 13 · click to enlarge
Page 13

8 Guarantee 8.1 Conditions The warranty requirements as stated in this user manual apply to the Pointer bicycles with electric pedal support. For proper use, it is important to comply with the user instructions and also with the assembly and service requirements as described in this booklet. You can claim warranty after Pointer Wheels B.V. the guarantee card has been completed completely by the first owner. Please send us the warranty card within 8 days of purchase. The right of guarantee applies only to the first owner. 8.2 Service requirements After a few weeks of driving in, have the dealer perform an overall check. Have any incorrect settings corrected. After that, have a minimum of six months service or maintenance done by the dealer. Additional conditions and warnings:

Depth discharge of the battery is excluded from warranty The battery charge only with included charger, model: ACK42(1) Use of bicycle carts and/or other additional load is not allowed The use of E-Bike on the beach is not permitted Touch or contact with corrosive and/ or aggressive substances is not permissible Damage to electronics resulting from cleaning with a powerful water jet falls outside the guarantee If modification expires the warranty and service The warranty will expire if there has been no action in accordance with the user manual Any claim for warranty lapses if no purchase note can be shown showing the date of purchase

Page 14 of the Pointer Eguna N7 user manual — 14.pdf
Page 14 · click to enlarge
Page 14

8.3 Guarantee provisions Frame: 2 years warranty* on material and construction defects for aluminium frame. Lacquer: 1 year warranty* on all lacquer parts, including frame and front fork. Components: 1 year warranty* on material and construction defects. Battery: 1 year warranty* excluding deep discharge and use of non-original charger. * Warranty is not provided if there is improper or unusual use, insufficient service or maintenance, unexpertly repair and/or assembly (see mounting instructions). No warranty is granted for the use of non-original parts, modifications in construction or design and if the bicycle has been used for rental and/or if it has been operated to transport more than one person. Wear is not covered by the warranty. LET OP: Damage caused by the use of fork-offers is not covered by the guarantee, as all forms of molest are excluded from the warranty. The manufacturer shall assess whether or not a guarantee is granted. Any installation, dismantling and freight costs shall be borne by the owner. Guarantee is handled exclusively through the Pointer dealer. The defective parts must be sent free of charge for evaluation by the dealer concerned, indicating the complaint and accompanied by a copy of the guarantee certificate and purchase order.

Page 15 of the Pointer Eguna N7 user manual — 15.pdf
Page 15 · click to enlarge
Page 15

9 Assembly rules NOTE: This bike is not ready for first use. Your dealer will make your bike ready for riding. Pedals: The pedal on which an R is mounted on the right side (chain cabinet side). Turn the axle in the crank by hand, then securely with pedal or stitch key. Mount the pedal on which an L is mounted, to your left. Turn the axle in the crank to the left, securely with pedal or wrench. Saddle: To determine the right height, secure the seat iron with a ring or in-bus key, ensure that any aluminium filling can stays in place. NOTE THE MARK ON THE SADDLE PIN: Never mount the saddle higher than this mark! Send: Adjust and determine the correct height. Then tighten the expander bolt firmly. NOTICE THE MARK ON THE STEERING PIN: Never mount the steering wheel higher than this mark! Tyres: Apply to the right tension (see tyre requirement), make sure that the tire is pulled evenly into the rim. Spikes: Checking for the right voltage. Brakes: Adjust correctly, prevent running and block. Crankset: In spyless crankstel the bolt check: torque steel: 30-40 NM, aluminium: 20-25 NM. General: Check all bolts, nuts and screws and check them if necessary. Do not treat stainless parts preventively to prevent rust formation.

Page 16 of the Pointer Eguna N7 user manual — 16.pdf
Page 16 · click to enlarge
Page 16

10 Technical specifications Model: City R3 Eguna N7 E.forta N3.L E.forta N7.L E

Frame: Aluminium 6061ED Aluminium 60 61ED Front fork: Hi-ten Hi-ts: Eguna N7 Suspension: E.forta N3.L Suspension:E.fortA N7.L Suspensions: E

Gear: 3 Shimano Remnaaf Shimanos Nexus 7: Eguna N7 Shimanoo Nexus 3: E.forta N3.L ShimanoC Nexus7: E.forta N7.L Shimeno Nexus-7: E,forta n7 Unica Shimanoe Nexus7, E. forta n7, Step In

Front brake: V-brake V-bracke Engine: 200W / 36V DC 200W/ 36V DC Brushless Planetary System Brush free planetary system

Controller/ PWM microprocessor PWm microprocessor operation LCD self-diagnosis LCD Self Diagnosis

Overvoltages- 20 Ampère 20 Ampere protection Undervoltages - 31,5 Volt 31,5 volt security Type: Pedal sensor detection Pedal sensing Weight bike: 17,0 kg 20,4 kg Eguna (without battery) 22,1 kg E.forta N3.L 22,6 kg E

Battery Panasonic: Standard 36V / 7AH LI-ion; 2.5 kg Premium 36V/ 7 AH LI Ion; 2.5kg Excellent 36V + 9AHLI-ion, 2.8 kg Decima 36V v / 12 AH Li-Ion; 2.8 kg

Charger: Model ACK42(1) Model OCK42(1 230V / 36V; Charging time 4-5 hours 230V/ 36V, charging time 4-5 h

Tax: Max. 100 kg / 1 person Max. 100 kg / 1 person Range: Battery Standard 50-70 km Battery Premium 50-70km (low setting) Battery Excellent 70-100 km

Accu Decima 100-145 km 1st edition 2011 16

Ask about the Pointer Eguna N7

Owners and our team usually reply within a day — and your question helps the next person too.

Add your email to get notified when it’s answered — no spam, ever.

0 questions
No questions yet about the Pointer Eguna N7

Be the first to ask — other owners or our team will answer.

Original document

Pointer Eguna N7 manual PDF

16 pages·3 MB·Bicycle E-bike·PDF
Click any page above to open it here
Page 1 / …
100%
Loading pages…