Instruction/ maintenance manual of the product AAR-2020SA Adaptec
Go to page of 9
-------------------------------------------------------------------- README.TXT Adaptec RAID Controllers: ASR-2020ZCR/2025ZCR/2120S/2130S/ 2200S/2230S AAR-2020SA/2025SA/2410SA/2810SA/21610SA as of Apr.
9.8 SOYO KT333 Dragon Ultra 9.9 SuperMicro P3T-DDE 9.10 SuperMicro P40C6+/P4DCE 9.11 Tyan Trinity 400 9.12 Tyan S2460 -------------------------------------------------------------------- 1. Software and Documentation 1.1. Controller & Utility Software Note: The latest versions of firmware and driver software can be downloaded from www.
- The Adaptec SATA and SCSI RAID Controllers Installation and User's Guide contains complete installation information for the controllers and drivers, as well as complete instructions for all utilities and Adaptec Storage Manager software. -------------------------------------------------------------------- 3.
-------------------------------------------------------------------- 4. Array Level-Specific Notes 4.1 RAID 10 Notes - If a RAID-10 is degraded, the BIOS reports a degraded RAID-0 and a degraded RAID-1 instead of degraded RAID-10. - You cannot change the priority of a RAID-10 verify.
attempt any other operations while performing a Clear operation on a SATA array. - SATA events are displayed with SCSI nomenclature. - Adaptec 2810SA/21610SA only -- ACU is not supported on these controllers when installed in the following motherboards: o SuperMicro P40C6+/P4DCE Server Board, 512 MB DDR RAM o Intel Xeon x 2 System BIOS rev: 1.
ø m=<mouse type> ø s=<video server type> ø mon=<monitor value> ø p=<port> fbdev ø <mouse type> man: for manual configuration serial: for generic, thinking, logitech,.
formatted, you will receive an error message telling you that the disk cannot be opened. 7.3 CLI (Command Line Interface) - DO NOT run concurrently with Adaptec Storage Manager. Doing so may cause unpredictable results. -------------------------------------------------------------------- 8.
- Hot target discovery is not supported for smaller arrays. Arrays created may not be available to the Linux OS until an OS reboot. - Adaptec 2020ZCR/2025ZCR/2020SA/2025SA only -- With the SLES 9.0 64-Bit operating system, you cannot format a spanned volume of a large size without the operating system locking up.
9.6 Intel Xeon (x 2 System BIOS rev: 1.26) - Adaptec 2810SA/21610SA only -- ACU is not supported on this motherboard. WORKAROUND: Use Adaptec Storage Manager on the bootable CD to create arrays. 9.7 Microstar MS-6321 - The Adaptec RAID controllers are not supported in Slot 5.
An important point after buying a device Adaptec AAR-2020SA (or even before the purchase) is to read its user manual. We should do this for several simple reasons:
If you have not bought Adaptec AAR-2020SA yet, this is a good time to familiarize yourself with the basic data on the product. First of all view first pages of the manual, you can find above. You should find there the most important technical data Adaptec AAR-2020SA - thus you can check whether the hardware meets your expectations. When delving into next pages of the user manual, Adaptec AAR-2020SA you will learn all the available features of the product, as well as information on its operation. The information that you get Adaptec AAR-2020SA will certainly help you make a decision on the purchase.
If you already are a holder of Adaptec AAR-2020SA, but have not read the manual yet, you should do it for the reasons described above. You will learn then if you properly used the available features, and whether you have not made any mistakes, which can shorten the lifetime Adaptec AAR-2020SA.
However, one of the most important roles played by the user manual is to help in solving problems with Adaptec AAR-2020SA. Almost always you will find there Troubleshooting, which are the most frequently occurring failures and malfunctions of the device Adaptec AAR-2020SA along with tips on how to solve them. Even if you fail to solve the problem, the manual will show you a further procedure – contact to the customer service center or the nearest service center