Instruction/ maintenance manual of the product MDW-250L Adams
Go to page of 20
© Adam Equipm ent Com pany 2012 Adam Equipment MDW – 25 0L DIGIT A L HE ALTH AND FITNESS SC A LE Software EMW-250L-20 080601 ADAM EQUIP MENT CO. L TD.
© Adam Equipm ent Com pany 2012 Page 1 Rev C5, Janu ary 2012.
© Adam Equipm ent Com pany 2012 Page 2 Rev C5, Janu ary 2012 CONTENTS 1.0 INTRODUCTION .......................................................................................... 4 2.0 TECHNICAL SPECIFI CATIONS ........................................
© Adam Equipm ent Com pany 2012 Page 3 Rev C5, Janu ary 2012.
© Adam Equipm ent Com pany 2012 Page 4 Rev C5, Janu ary 2012 1.0 INTR ODUCTION • The MDW 250L scale is a Digital Health and Fitness Scale. • It is an accurate electronic device with advanced design and st able performance. • It is designed to measure both the weight and the height of a person.
© Adam Equipm ent Com pany 2012 Page 5 Rev C5, Janu ary 2012 3.0 DISP LA Y A ND K EY DESCRIPTIONS KEYS FUNCTIONS [On / Off /Zero] To turn the scale on or off . To zero the scale if the displa y drifts from zero. [Tare] To tare the scale, if necessary.
© Adam Equipm ent Com pany 2012 Page 6 Rev C5, Janu ary 2012 4.0 SE TTING UP THE SC ALE • Take the scale out of the box. • Unwind the load cell cable (number 2 o n the diagram). • Run the cable up through the pillar f rom the base of the scale.
© Adam Equipm ent Com pany 2012 Page 7 Rev C5, Janu ary 2012 5.0 FUNC TION 5.1 WEIGHING • Place the Scale on an even floor and press the [On/Off] key. • The instrument performs a self-test after which it is ready fo r operation. • Press the [On/Off] key and the machine switches off.
© Adam Equipm ent Com pany 2012 Page 8 Rev C5, Janu ary 2012 5.2 MEASURING HEIGH T • W hile meas uring the height, it is necessary to pull up the measuring board at a right angle with the insid e tube. • W hen the tube is pulled out straight, it is sufficient to measure the height fo rm 80-136cm.
© Adam Equipm ent Com pany 2012 Page 9 Rev C5, Janu ary 2012 show ‘ 250.0kg ’ or ’ 500.0lb ’ de pending o n which un it you chosen, this is the default calibration weight from t he f actory. Press the [UNIT] ke y t o select the calibration weight unit t hat you want to calibrate in.
© Adam Equipm ent Com pany 2012 Page 10 Rev C5, Januar y 2012 7.0 User Parameter s This indicator has 4 parameter set tings that can be selected. 1. W hen the scale is in normal weighing mode, press a nd hold down the [ON / O FF] key and the [UNIT] key for 3 seconds until ‘ SEtUP ’ is sho wn on the display.
© Adam Equipm ent Com pany 2012 Page 11 Rev C5, Januar y 2012 8.0 RS2 32 Commu nications (Only applied for scale with RS232 interface) The Interface parameters are: Connection details are: 8.
© Adam Equipm ent Com pany 2012 Page 12 Rev C5, Januar y 2012 8.3 When Parameter S.F. in sec tion 7 is set to 1 : Continuous output of the current displayed reading and unit, and no data is received.
© Adam Equipm ent Com pany 2012 Page 13 Rev C5, Januar y 2012 <p> Polarity character including m inus sign for negative weight and a space character for positive weight W 1- W7 weight data <dp> decimal point U1U2: measure units, kg, lb 8.
© Adam Equipm ent Com pany 2012 Page 14 Rev C5, Januar y 2012 Table1: The status bits def inition: Bit Byte 1 (H 1 ) Byte 2 (H 2 ) B yte 3 (H 3 ) 0=stable 0= not under capacity 0 1= not stable 1= und.
© Adam Equipm ent Com pany 2012 Page 15 Rev C5, Januar y 2012 9.0 Error Messa ges 1. 0 0 0 0 ¯ ¯ ¯ ¯ ¯ Zero point is over the setting range 2. 0 0 0 0 _ _ _ _ _ Zero is below the sett ing range 3. Ad Ad Ad Ad ¯ ¯ ¯¯ ADC is over max. range; 4.
© Adam Equipm ent Com pany 2012 Page 16 Rev C5, Januar y 2012.
© Adam Equipm ent Com pany 2012 Page 17 Rev C5, Januar y 2012.
© Adam Equipm ent Com pany 2012 Page 18 Rev C5, Januar y 2012 Man ufacturer’s Declarati on of Co nformity This product has been m anufactured in accordanc e with the harmonised European s tandards,.
© Adam Equipm ent Com pany 2012 Page 19 Rev C5, Januar y 2012 A D AM EQUIPMENT is an ISO 9001:2000 certi fied global company with more than 35 years experience in the production and sale of electronic w eighing equipment.
An important point after buying a device Adams MDW-250L (or even before the purchase) is to read its user manual. We should do this for several simple reasons:
If you have not bought Adams MDW-250L yet, this is a good time to familiarize yourself with the basic data on the product. First of all view first pages of the manual, you can find above. You should find there the most important technical data Adams MDW-250L - thus you can check whether the hardware meets your expectations. When delving into next pages of the user manual, Adams MDW-250L you will learn all the available features of the product, as well as information on its operation. The information that you get Adams MDW-250L will certainly help you make a decision on the purchase.
If you already are a holder of Adams MDW-250L, but have not read the manual yet, you should do it for the reasons described above. You will learn then if you properly used the available features, and whether you have not made any mistakes, which can shorten the lifetime Adams MDW-250L.
However, one of the most important roles played by the user manual is to help in solving problems with Adams MDW-250L. Almost always you will find there Troubleshooting, which are the most frequently occurring failures and malfunctions of the device Adams MDW-250L along with tips on how to solve them. Even if you fail to solve the problem, the manual will show you a further procedure – contact to the customer service center or the nearest service center
