Instruction/ maintenance manual of the product FMR-7036 Bosch Appliances
Go to page of 8
FMR-7036 EN Installation Instructions Fire Annunciator Keypad.
FMR-7036 | Fire Annunciator Keypad | Contents 2 Bosch Security Systems, Inc. | 9/08 | F01U010584-01 Cont ent s Contents ........................................................................... 2 1.0 Notice ..........................................
FMR-7036 | Fire Annunciator Keypad | 1.0 Notice . Bosch Security Systems, I nc. | 9/08 | F01U010584-01 3 1. 0 N o t i c e These instructions cover the installation of the Bosch Security Systems, Inc. FMR-7036 Fire Annunciator Keypad in a fire system supervised by a Bosch FPD- 7024 Fire Alarm Control/Communicator.
FMR-7036 | Fire Annunciator Keypad | 5.0 Setting the FMR-7036 Address 4 Bosch Security Systems, Inc. | 9/08 | F01U010584-01 Figure 3: Mounting Hole Locations Back of FMR-7036 Keypad 1 2 2 3 3 3 3 4 1 - Holding tabs for reference guides 2 - Release tab 3 - Mounting Hole 4 - Wire Entrance Do not secure the base at this point.
FMR-7036 | Fire Annunciator Keypad | 7.0 FMR-7036 Programming . Bosch Security Systems, I nc. | 9/08 | F01U010584-01 5 Up to three keypads may be used on any single 1,000 ft. (305 m) run of #18 AWG (1.2 mm) wire. Bring the wiring through the wire entrance in the keypad’s base.
FMR-7036 | Fire Annunciator Keypad | 8.0 FMR-7036 Operation 6 Bosch Security Systems, Inc. | 9/08 | F01U010584-01 8.2 Reset The Reset key is used to reset the control panel after an alarm has occurred. Any sounders or NACs that are activated will silence, and smoke detector zones will remove power briefly to reset detectors.
FMR-7036 | Fire Annunciator Keypad | 9.0 Troubleshooting . Bosch Security Systems, I nc. | 9/08 | F01U010584-01 7 9.0 T roubleshoot ing Refer to Table 2 when troubleshooting the FMR-7036.
© 2008 Bosch Security Systems, Inc. F01U010584-01 Bosch Security Systems, Inc. 130 Perinton Parkway Fairport, NY 14450-9199 (800) 289-0096 www.boschsecurity.
An important point after buying a device Bosch Appliances FMR-7036 (or even before the purchase) is to read its user manual. We should do this for several simple reasons:
If you have not bought Bosch Appliances FMR-7036 yet, this is a good time to familiarize yourself with the basic data on the product. First of all view first pages of the manual, you can find above. You should find there the most important technical data Bosch Appliances FMR-7036 - thus you can check whether the hardware meets your expectations. When delving into next pages of the user manual, Bosch Appliances FMR-7036 you will learn all the available features of the product, as well as information on its operation. The information that you get Bosch Appliances FMR-7036 will certainly help you make a decision on the purchase.
If you already are a holder of Bosch Appliances FMR-7036, but have not read the manual yet, you should do it for the reasons described above. You will learn then if you properly used the available features, and whether you have not made any mistakes, which can shorten the lifetime Bosch Appliances FMR-7036.
However, one of the most important roles played by the user manual is to help in solving problems with Bosch Appliances FMR-7036. Almost always you will find there Troubleshooting, which are the most frequently occurring failures and malfunctions of the device Bosch Appliances FMR-7036 along with tips on how to solve them. Even if you fail to solve the problem, the manual will show you a further procedure – contact to the customer service center or the nearest service center
