Instruction/ maintenance manual of the product F.01U.252.722 Bosch Appliances
Go to page of 36
NurseCall Relay Unit F.01U.252.722 | V1 | 2011.12 en User Manual.
.
NurseCall Relay Unit Table of Cont ents | en 3 Bosch Security Systems User Manual F .01U.252.722 | V1 | 2011.12 T able of Contents 1 Safety instructions 5 1.1 Importance of safety instructions 5 1.2 Disregarding safety rules 5 1.3 Environmental conditions 5 1.
4 en | Table of Cont ents NurseCall Relay Unit F .01U.252.722 | V1 | 2011.12 User Manual Bosch Security Systems 4.3 Special settings 21 4.3.1 Displaying the firmware version 21 4.3.2 Resetting all the parameters and buffers 21 4.3.3 Assistance and fire priority 21 4.
NurseCall Relay Unit Safety instructions | en 5 Bosch Security Systems User Manual F .01U.252.722 | V1 | 2011.12 1 Safety instructions 1.1 Impor tance of safety instructions Each safety and protection instruction in this manual must be adhered to in order to avoid personnel injurie s, property dama ges or environmental pollution.
6 en | Safety instr uctions NurseCall Relay Unit F .01U.252.722 | V1 | 2011.12 User Manual Bosch Security Systems 1.4.1 Observation and information In case of defective operation or any other technical incident for which no remedy is described in this manual, please contac t immediately your local representative.
NurseCall Relay Unit Descrip tion | en 7 Bosch Security Systems User Manual F .01U.252.722 | V1 | 2011.12 2 Description 2.1 G eneral description 2.1.1 Top view 1. Loudspeaker. See Section 2.2.1 Loudspeaker, page 10 . 2. Display. See Section 2.2.2 Display, page 10 .
8 en | Description NurseCall Relay Unit F .01U.252.722 | V1 | 2011.12 User Manual Bosch Security Systems 2.1.2 Bottom view 1. Identification label. 2. Cable channels. 3. Wall mounting holes (distance between holes, 157 mm). See Section 3.2.3 Wall installation, page 14 for a detailed description.
NurseCall Relay Unit Descrip tion | en 9 Bosch Security Systems User Manual F .01U.252.722 | V1 | 2011.12 2.1.3 Front view 1. LED Indicator 2.1.4 Relay Unit rear view 1. RS-485 connector. See Section A.5.4 RS-485 socket (unit rear), page 34 for wiring.
10 en | Description NurseCall Relay Unit F .01U.252.722 | V1 | 2011.12 User Manual Bosch Security Systems 2.2 Detailed description 2.2.1 Loudspeaker When one of the following alarms or messages is received by the NurseCall Relay Unit, the internal loudspeaker is acti vated until acknowledgement.
NurseCall Relay Unit Descrip tion | en 11 Bosch Security Systems User Manual F .01U.252.722 | V1 | 2011.12 Keys Function Access to the printer/display setup (Relay Plus Unit only) See Section 4.4 Printer/display se tup on the Relay Plus Unit, Page 22 .
12 en | Description NurseCall Relay Unit F .01U.252.722 | V1 | 2011.12 User Manual Bosch Security Systems 2.2.4 RS-485 interface One NurseCall Main Unit and up to 32 NurseC all Relay Units can be connected by a RS-485 bus. The bus must be connected to pins 2 and 5 of the RS-485 socke t.
NurseCall Relay Unit Installation | en 13 Bosch Security Systems User Manual F .01U.252.722 | V1 | 2011.12 3 Installation 3.1 Unpacking The NurseCall Relay Unit is care fully packed fo r transportation. The components contained in the box are prot ected, but should be handled with care.
14 en | Installation NurseCall Relay Unit F .01U.252.722 | V1 | 2011.12 User Manual Bosch Security Systems 3.2 Installation 3.2.1 Generalities Install the NurseCall Relay Unit in a dry place, away from any source of heat. Tools required: – Torx T20 screwdriver.
NurseCall Relay Unit Installation | en 15 Bosch Security Systems User Manual F .01U.252.722 | V1 | 2011.12 3.2.5 Connecting to the mains The NurseCall Relay U nit is powered b y an adaptor (230/10 VAC or 115/10 VAC). 1. Plug the power adaptor into a power outlet placed near the unit.
16 en | Installation NurseCall Relay Unit F .01U.252.722 | V1 | 2011.12 User Manual Bosch Security Systems 3.2.6 Setting the jumpers on the commun ication board on the Relay Plus Unit 1. Disassemble the unit; see Section 6.5.1 Disassembl ing the unit, page 29 .
NurseCall Relay Unit Installation | en 17 Bosch Security Systems User Manual F .01U.252.722 | V1 | 2011.12 3.2.7 Connecting the RS-485 One NurseCall Main Unit and up to 32 NurseCa ll Relay Units can be connected to an RS-485 bus. Please contact a specialist for a correct installation.
18 en | Installation NurseCall Relay Unit F .01U.252.722 | V1 | 2011.12 User Manual Bosch Security Systems 3.2.8 Connecting the RS-232 to the Relay Plus U nit Connect the printer or display device to the 9-pole SUB-D connector (1) at the re ar part of the housing of the Relay Plus Unit.
NurseCall Relay Unit Programming | en 19 Bosch Security Systems User Manual F .01U.252.722 | V1 | 2011.12 4 Programming 4.1 G eneralities 4.1.1 Using the keyboard Open the cover carefully and use the keyboard. To access the special settings progra mming, press three times quickly.
20 en | Programming NurseCall Relay Unit F .01U.252.722 | V1 | 2011.12 User Manual Bosch Security Systems 4.2 First use 4.2.1 List of original factory settings * Locating mode and identification number are set at first use. To chan ge a value, reset the unit.
NurseCall Relay Unit Programming | en 21 Bosch Security Systems User Manual F .01U.252.722 | V1 | 2011.12 Manual selection of the NurseCall Main Unit 5.a. Scroll with and to set manually the identification number. Confirm with or the Gree n button. The Re lay Unit signalizes that it is not connected to the RS-485 bus.
22 en | Programming NurseCall Relay Unit F .01U.252.722 | V1 | 2011.12 User Manual Bosch Security Systems 4.3.4 Assistance and fire non priority This command sets the assistance call and the fire alarm as non-priority calls. This means that the last alarm is displayed, whateve r its type.
NurseCall Relay Unit Programming | en 23 Bosch Security Systems User Manual F .01U.252.722 | V1 | 2011.12 4.4.2 Selection "None" if you have selected None , press to confirm. In this case, there will be no printer/di splay output. This is the default setting.
24 en | Programming NurseCall Relay Unit F .01U.252.722 | V1 | 2011.12 User Manual Bosch Security Systems c. Choose 0 to 9 characters for the criterion, followed by 0 to 9 spaces. Default values are 2 characters + 1 space. 7. Repeat the operation for a.
NurseCall Relay Unit Operatio n | en 25 Bosch Security Systems User Manual F .01U.252.722 | V1 | 2011.12 5 Operation 5.1 Adjusting the loudspeake r volume When the NurseCall Relay Unit is in standby mode: Press to increase the volume. Press to decrease the volume.
26 en | Operation NurseCall Rela y Unit F .01U.252.722 | V1 | 2011.12 User Manual Bosch Security Systems 5.2.1 Switching between alarm and event buffers indication The alarm buffer is indicated by default. If you are in the event buffer, the unit changes automatically to the alarm buffer after 1 minute without activity.
NurseCall Relay Unit Operatio n | en 27 Bosch Security Systems User Manual F .01U.252.722 | V1 | 2011.12 Third information block 8. position of the last passed be ac on, visible in all display modes. If no beacon is registered or if the alarm is sent outside of the range of a beacon, the POS 000 will be displayed.
28 en | Maintenance NurseCall Relay Unit F .01U.252.722 | V1 | 2011.12 User Manual Bosch Security Systems 6 Maintenance 6.1 Checking the sy stem Check the correct function of your NurseCall system.
NurseCall Relay Unit Maint enance | en 29 Bosch Security Systems User Manual F .01U.252.722 | V1 | 2011.12 6.4 Cleaning Avoid using cleaning products or detergents. Wipe off your NurseCall Relay Unit occasionally with a dry cloth. 6.5 Par ts replacement 6.
30 en | Maintenance NurseCall Relay Unit F .01U.252.722 | V1 | 2011.12 User Manual Bosch Security Systems 6.5.2 Backup battery repl acing Important Safety Instructions The battery should charge for 24 hours before using the NurseCall Relay Unit for the first time, after replacing the battery or after a long power shortage.
NurseCall Relay Unit Disposal | en 31 Bosch Security Systems User Manual F .01U.252.722 | V1 | 2011.12 7 Disposal The NurseCall Relay Unit is marked wi th a crossed-out wastebasket symbol.
32 en | NurseCall Relay Unit F .01U.252.722 | V1 | 2011.12 User Manual Bosch Security Systems A Appendix A .1 Electrical specifications A .2 Dimensions and we ight A .3 Environmental conditions Voltage 230 or 115/10VAC Current 280 mA Frequency 50/60 Hz Power 2.
NurseCall Relay Unit | en 33 Bosch Security Systems User Manual F .01U.252.722 | V1 | 2011.12 A .4 List of crit eria Criterion Number Alarm (A) or Event (E) Comment ERROR 00 A System malfunction, e.g. component defective PERSONNEL A 01 E Coded key acti ve (N46) LOW BATTERY 02 A Battery at low level (Transmitter) ACK.
34 en | NurseCall Relay Unit F .01U.252.722 | V1 | 2011.12 User Manual Bosch Security Systems A .5 Connectors A.5.1 LINE socket (u nit bottom) A.5.2 Power socket (unit bottom) A.5.3 RS-232 socket (Relay Plus Unit rear) A.5.4 RS-485 socket (unit rear) LINE socket Wiring 1.
.
Bosch Security Systems Robert-Bosch-Ring 5 85630 Grasbrunn Germany www.boschsecurity.com © Bosch Security Systems, 2011.
An important point after buying a device Bosch Appliances F.01U.252.722 (or even before the purchase) is to read its user manual. We should do this for several simple reasons:
If you have not bought Bosch Appliances F.01U.252.722 yet, this is a good time to familiarize yourself with the basic data on the product. First of all view first pages of the manual, you can find above. You should find there the most important technical data Bosch Appliances F.01U.252.722 - thus you can check whether the hardware meets your expectations. When delving into next pages of the user manual, Bosch Appliances F.01U.252.722 you will learn all the available features of the product, as well as information on its operation. The information that you get Bosch Appliances F.01U.252.722 will certainly help you make a decision on the purchase.
If you already are a holder of Bosch Appliances F.01U.252.722, but have not read the manual yet, you should do it for the reasons described above. You will learn then if you properly used the available features, and whether you have not made any mistakes, which can shorten the lifetime Bosch Appliances F.01U.252.722.
However, one of the most important roles played by the user manual is to help in solving problems with Bosch Appliances F.01U.252.722. Almost always you will find there Troubleshooting, which are the most frequently occurring failures and malfunctions of the device Bosch Appliances F.01U.252.722 along with tips on how to solve them. Even if you fail to solve the problem, the manual will show you a further procedure – contact to the customer service center or the nearest service center
