Instruction/ maintenance manual of the product DX4010I Bosch Appliances
Go to page of 12
EN Installation Instructions RS-232 Serial Interface Module DX4010i.
DX4010i | Installation Instructions | Trademarks 2 Bosch Security Systems, Inc. | 1/05 | 4998141106C Trademarks • BlackBox® is either a registered trademark or a trademark of BlackBox Corporation in the United States and/or other countries.
DX4010i | Installation Instructions | Contents Bosch Security Systems, Inc. | 1/05 | 4998141106C 3 Contents 1.0 General Information ....................................... 4 2.0 Specifications .................................................... 4 3.0 Installation Standards .
DX4010i | Installation Instructions | 1.0 General Information 4 Bosch Security Systems, Inc. | 1/05 | 4998141106C 1 .0 General Informat ion The DX4010i is a data terminal equipment (DTE) configured RS-232 serial device interface (SDI) module designed to operate with compatible control panels.
DX4010i | Installation Instructions | 4.0 Wiring Bosch Security Systems, Inc. | 1/05 | 4998141106C 5 4.0 W iring Remove all power to the control panel (AC and standby battery) before making or breaking any connections. Failure to do so can result in personal injury or damage to the equipment.
DX4010i | Installation Instructions | 5. 0 DX4010i Jumper Pin Settings 6 Bosch Security Systems, Inc. | 1/05 | 4998141106C Figure 5: Parallel Device Connections SER Rx Tx BUS Rx Tx LED ENABLE DB9 GN D ENABLE P1 P6 P2 P3 2 1 1- Parallel converter cable box (BlackBox P/N: PI045A 2- Parallel printer (compatible option bus control panels only) 5.
DX4010i | Installation Instructions | 6.0 Re mote Programming Direct Connection Bosch Security Systems, Inc. | 1/05 | 4998141106C 7 5.3 Address DIP Switches The address DIP switches are used to assign an address to the DX4010i. Refer to Table 3 for DIP switch option bus address settings.
DX4010i | Installation Instructions | 6.0 Re mote Programming Direct Connection 8 Bosch Security Systems, Inc. | 1/05 | 4998141106C Table 3: Option Bus Address DIP Switch Settings DIP Switch Settings .
DX4010i | Installation Instructions | 6.0 Re mote Programming Direct Connection Bosch Security Systems, Inc. | 1/05 | 4998141106C 9 Table 4: SDI Bus Address DIP Switch Settings SDI DIP Switch Settings.
DX4010i | Installation Instructions | 7.0 DB9 DTE RS-232 Connector (P6) 10 Bosch Security Systems, Inc. | 1/05 | 4998141106C 7 .0 DB9 D TE R S -232 Connect or ( P6 ) The DX4010i serial port is wired as a DTE device.
DX4010i | Installation Instructions | 8.0 RJ-16 Data Bus Connector (P3) Bosch Security Systems, Inc. | 1/05 | 4998141106C 11 8.0 RJ -1 6 Dat a Bus Connect or (P 3) Figure 9: P3 Connector SER Rx Tx BUS.
Bosch Security Systems 130 Perinton Parkway Faiport, NY 14450-9199 USA Customer Service: (800) 538-5807 ; Technical Support: (888) 886-6189 © 2005 Bosch Security Systems 4998141106C Bosch Security Sy.
An important point after buying a device Bosch Appliances DX4010I (or even before the purchase) is to read its user manual. We should do this for several simple reasons:
If you have not bought Bosch Appliances DX4010I yet, this is a good time to familiarize yourself with the basic data on the product. First of all view first pages of the manual, you can find above. You should find there the most important technical data Bosch Appliances DX4010I - thus you can check whether the hardware meets your expectations. When delving into next pages of the user manual, Bosch Appliances DX4010I you will learn all the available features of the product, as well as information on its operation. The information that you get Bosch Appliances DX4010I will certainly help you make a decision on the purchase.
If you already are a holder of Bosch Appliances DX4010I, but have not read the manual yet, you should do it for the reasons described above. You will learn then if you properly used the available features, and whether you have not made any mistakes, which can shorten the lifetime Bosch Appliances DX4010I.
However, one of the most important roles played by the user manual is to help in solving problems with Bosch Appliances DX4010I. Almost always you will find there Troubleshooting, which are the most frequently occurring failures and malfunctions of the device Bosch Appliances DX4010I along with tips on how to solve them. Even if you fail to solve the problem, the manual will show you a further procedure – contact to the customer service center or the nearest service center