Instruction/ maintenance manual of the product D268 Bosch Appliances
Go to page of 16
D268, D269 Independent Zone Control Operation and Installation Manual.
D268, D269 Operation and Installation Manual 74-04758-000-H Page 2 Copyright © 2001 Radionics D268, D269 Notice Notice The material and instructions covered in this manual have been carefully checked for accuracy and are presumed to be reliable. However, Radionics, Inc.
D268, D269 Operation and Installation Copyright © 2001 Radionics Page 3 74-04758-000-H D268, D269 Description Description The D268/269 Independent Zone Control Modules are accessory devices for use with Radionics control/ communicators.
D268, D269 Operation and Installation Manual 74-04758-000-H Page 4 Copyright © 2001 Radionics D268, D269 Operation Operation (continued) Open/Close Output This output presents an open circuit to the panel when the D268/D269 is disarmed, and a normal circuit when the D268/D269 is armed and not in alarm.
D268, D269 Operation and Installation Copyright © 2001 Radionics Page 5 74-04758-000-H D268, D269 Programming Programming or Changing the Passcode (continued) 1. Press the center bottom blank key once (see Figure 1). 2. Enter the old passcode once (1234 or 2222 when first installed).
D268, D269 Operation and Installation Manual 74-04758-000-H Page 6 Copyright © 2001 Radionics D268, D269 Programming Figure 2: D268 Module Using the D268 Module with the D8112 Control/Communicator The D268 controls arming/disarming and entry/exit delay for the zone input to which it is connected.
D268, D269 Operation and Installation Copyright © 2001 Radionics Page 7 74-04758-000-H D268, D269 Programming D8112 Control/Communicator Audible Alarms The D8112 can be programmed to sound an audible alarm from its alarm output when the D268/D269 is tripped while armed.
D268, D269 Operation and Installation Manual 74-04758-000-H Page 8 Copyright © 2001 Radionics D268, D269 Installation D268 Module Installation Mounting the D268 The D268 Independent Zone Control Module is suitable for installation in a D8103 Enclosure or a D8108A Attack Resistant Enclosure.
D268, D269 Operation and Installation Copyright © 2001 Radionics Page 9 74-04758-000-H D268, D269 Installation Figure 4: Wiring the D268/D269.
D268, D269 Operation and Installation Manual 74-04758-000-H Page 10 Copyright © 2001 Radionics D268, D269 Installation.
D268, D269 Operation and Installation Copyright © 2001 Radionics Page 11 74-04758-000-H D268, D269 Installation D269 Keypad Installation The D269 Keypad is shipped with a faceplate, a backbox/circuit assembl y , a 4-wire cable, two mounting screws, two collapsible clips, and two wall mounting plates.
D268, D269 Operation and Installation Manual 74-04758-000-H Page 12 Copyright © 2001 Radionics D268, D269 Installation Figure 7 Independent Zone Control Within Protected Premises Wiring the D269 Keypads Y ou can wire up to four D269 Keypads in parallel to the D268 Module (see Figure 4).
D268, D269 Operation and Installation Copyright © 2001 Radionics Page 13 74-04758-000-H D268, D269 Installation Figure 8: Zone Control Outside the Main Protected Premises Y ou can connect up to eight D268 modules to a single panel. Each D268 can be connected to a D269 that has a unique combination.
D268, D269 Operation and Installation Manual 74-04758-000-H Page 14 Copyright © 2001 Radionics D268, D269 Installation D268/D269 Configurations (continued) For applications requiring more than four D268 Modules, install a second enclosure to house the additional modules (see Figure 10).
D268, D269 Operation and Installation Copyright © 2001 Radionics Page 15 74-04758-000-H D268, D269 Specifications Specifications Operating Voltage: Nominal 12 VDC supplied from the panel auxiliary power suppl y.
© 2001 Radionics, a division of Detection Systems, Inc. 74-04758-000-H 8/01 PO Box 80012, Salinas, CA 93912-0012 USA Operation and Installation D268, D269 Customer Service: (800) 538-5807 Page 16 of .
An important point after buying a device Bosch Appliances D268 (or even before the purchase) is to read its user manual. We should do this for several simple reasons:
If you have not bought Bosch Appliances D268 yet, this is a good time to familiarize yourself with the basic data on the product. First of all view first pages of the manual, you can find above. You should find there the most important technical data Bosch Appliances D268 - thus you can check whether the hardware meets your expectations. When delving into next pages of the user manual, Bosch Appliances D268 you will learn all the available features of the product, as well as information on its operation. The information that you get Bosch Appliances D268 will certainly help you make a decision on the purchase.
If you already are a holder of Bosch Appliances D268, but have not read the manual yet, you should do it for the reasons described above. You will learn then if you properly used the available features, and whether you have not made any mistakes, which can shorten the lifetime Bosch Appliances D268.
However, one of the most important roles played by the user manual is to help in solving problems with Bosch Appliances D268. Almost always you will find there Troubleshooting, which are the most frequently occurring failures and malfunctions of the device Bosch Appliances D268 along with tips on how to solve them. Even if you fail to solve the problem, the manual will show you a further procedure – contact to the customer service center or the nearest service center
