Instruction/ maintenance manual of the product BL3100 Bolens
Go to page of 24
Operator’ s Manual 2-C ycle P etrol Mulching Blower / V acuum Model BL3100 Since it began making garden tools in 1850, Bolens has been kno wn for long-lasting , dependable products.
2 THANK YOU Thank you for buying this quality product. This modern outdoor power tool will provide many hours of useful service. You will find it to be a great labor-saving device. This operator’s manual provides you with easy-to- understand operating instructions.
3 NOTE: For users on U.S. Forest Land and in the states of California, Maine, Oregon and Washington. All U.S. Forest Land and the state of California (Public Resources Codes 4442 and 4443), Oregon and.
4 RULES FOR SAFE OPERA TION • IMPOR T ANT SAFETY INFORMA TION • READ ALL INSTRUCTIONS BEFORE OPERA TING • Read the instructions carefully. Be familiar with the controls and proper use of the unit. • Do not operate this unit when tired, ill, or under the influence of alcohol, drugs, or medication.
5 • Do not touch the engine or muffler. These parts get extremely hot from operation. When turned off they remain hot for a short time. • Do not operate the engine faster than the speed needed to do the job. Do not run the engine at high speed when not in use.
6 RULES FOR SAFE OPERA TION SYMBOL MEANING • SAFETY ALERT SYMBOL Indicates danger, warning, or caution. May be used in conjunction with other symbols or pictographs. • WARNING - READ OPERATOR'S MANUAL Read the Operator’s Manual(s) and follow all warnings and safety instructions.
7 RULES FOR SAFE OPERA TION APPLICA TION As a blower: • Cleaning yards, garages, driveways, porches, patios, around walls, fences and more As a vacuum: • Picking up leaves and other light debris B.
8 ASSEMBL Y INSTRUCTIONS Screw and Nut Screw and Nut Self Tapping Screw AT T ACHING AND REMOVING THE BLOWER/V ACUUM TUBE Attaching NOTE: The Blower/V acuum T ube comes un assembled on this unit. Installation is required to provide safe and easy use for the operator.
9 ASSEMBL Y INSTRUCTIONS Fig. 8 Fig. 7 Support Fitting 3. Snap the clip on to the support fitting (Fig. 7). 4. While standing in the operating position adjust length to fit the operator’s size. Pull tab to lengthen, pull strap to shorten (Fig 8). Clip INST ALLING THE SHOULDER HARNESS 1.
10 OIL AND PETROL INFORMA TION NOTE: Dispose of the old petrol/oil mix in accordance to Federal, State and Local regulations. CAUTION: For proper engine operation and maximum reliability , pay strict attention to the oil and petrol mixing instructions on the 2-cycle oil container .
11 ST AR TING/STOPPING INSTRUCTIONS ST ARTING INSTRUCTIONS 1. Mix petrol with oil. Fill petrol tank with petrol/oil mixture. Refer to Oil and Petrol Mixing Instructions . NOTE: The throttle control will remain in the position it’s placed until moved by the operator.
12 OPERA TING INSTRUCTIONS HOLDING THE BLOWER/V ACUUM Before operating the unit, stand in the operating position. (Fig. 12). Check for the following: • Operator is wearing proper clothing, such as b.
13 OPERA TING INSTRUCTIONS V acuum Operation Procedur es Check for the following before operating the unit: • Operator is wearing proper clothing, such as boots, safety glasses or goggles, ear/heari.
14 EMPTYING THE V ACUUM BAG NOTE: Empty the bag after each use to avoid deterioration and obstructing air flow, which will reduce the performance of the vacuum. 1. While pressing the latching tabs on both sides of the vacuum bag tube, pull the vacuum bag down off the unit (Fig.
15 MAINTENANCE AND REP AIR INSTRUCTIONS MAINTENANCE SCHEDULE Perform these required maintenance procedures at the frequency stated in the table. These procedures should also be a part of any seasonal tune-up. NOTE: Some maintenance procedures may require special tools or skills.
16 MAINTENANCE AND REP AIR INSTRUCTIONS Fig. 25 Fig. 26 4. Apply enough clean SAE 30 oil to lightly coat the filter (Fig. 25). 5. Squeeze the filter to spread and remove excess oil (Fig. 26). 6. Replace the air filter inside the air filter/muffler cover (Fig.
17 MAINTENANCE AND REP AIR INSTRUCTIONS Check Petrol Mixtur e Old and/or improperly mixed petrol is usually the reason for improper unit performance. Drain and refill the tank with fresh, properly-mixed petrol prior to making any adjustments. Refer to Oil and Petrol Information .
18 MAINTENANCE AND REP AIR INSTRUCTIONS CLEANING THE UNIT Use a small brush to clean off the outside of the unit. Do not use strong detergents. Household cleaners that contain aromatic oils such as pine and lemon, and solvents such as kerosene, can damage plastic housing or handle.
19 TROUBLESHOOTING CAUSE ACTION Old or improperly mixed petrol Drain petrol tank / Add fresh petrol mixture Air filter is plugged Replace or clean the air filter Improper carburetor adjustment Take to.
20 SPECIFICA TIONS ENGINE Engine Type.......................................................................................................................................... Air-Cooled, 2-Cycle Displacement ..........................................
21 NOTES.
22 PA R TS LIST Item Part No. Description 1 791-182059 Air Cleaner/Muffler Cover Assembly (includes 2 & 32) 2 791-180350B Air Cleaner Filter 3 791-180351 Carburetor Mounting Screw 4 791-180226 Wav.
23 PA R TS LIST HOUSING P ARTS - MODEL BL3100 2-CYCLE PETROL MULCHING BLOWER V ACUUM Item Part No. Description 1 753-04464 Engine Cover Assembly (includes 2) 2 791-181345 Cover Screw 3 791-182419 Thro.
SA VE THESE INSTRUCTIONS FOR FUTURE REFERENCE OPERATOR’S MANUAL PART NO. 769-00806 6/03 PRINTED IN U.S.A. MANUF ACTURER’S LIMITED W ARRANT Y FOR: No implied warranty, including any implied warrant.
An important point after buying a device Bolens BL3100 (or even before the purchase) is to read its user manual. We should do this for several simple reasons:
If you have not bought Bolens BL3100 yet, this is a good time to familiarize yourself with the basic data on the product. First of all view first pages of the manual, you can find above. You should find there the most important technical data Bolens BL3100 - thus you can check whether the hardware meets your expectations. When delving into next pages of the user manual, Bolens BL3100 you will learn all the available features of the product, as well as information on its operation. The information that you get Bolens BL3100 will certainly help you make a decision on the purchase.
If you already are a holder of Bolens BL3100, but have not read the manual yet, you should do it for the reasons described above. You will learn then if you properly used the available features, and whether you have not made any mistakes, which can shorten the lifetime Bolens BL3100.
However, one of the most important roles played by the user manual is to help in solving problems with Bolens BL3100. Almost always you will find there Troubleshooting, which are the most frequently occurring failures and malfunctions of the device Bolens BL3100 along with tips on how to solve them. Even if you fail to solve the problem, the manual will show you a further procedure – contact to the customer service center or the nearest service center
