Instruction/ maintenance manual of the product 190-751-OEM Bolens
Go to page of 8
OPERA T OR’S MANUAL TRACT OR SNOW CAB Model Number 190-751-OEM PRINTED IN U.S.A. FORM NO. 48898 (7/03) MTD PRODUCTS INC. P .O. BOX 368022 CLEVELAND, OHIO 44136-9722 IMPORT ANT : READ SAFETY RULES AND INSTRUCTION CAREFULL Y .
2 Any power equipment can cause injury if operated improperly or if the user does not understand how to operate the equipment. Exercise caution at all times, when using power equipment. 1. This cab provides foul weather protection only. It does not provide protection against exhaust fumes, collision, rollover or other accidents.
3 REF. QTY. DESCRIPTION REF. QTY. DESCRIPTION A 1 Hex Bolt, 5/8” x 1-3/4” B 2 Carriage Bolt, 5/16 x 2" C 4 Hex Bolt, 1/4 x 1-1/2" D 8 Hex Bolt, 5/16” x 1” E 2 Shoulder Bolt F 8 Lock .
4 TOOLS REQUIRED FOR ASSEMBLY (2) 7/16" Wrenches (2) 1/2” Wrenches (1) 3/4” Wrench (2) 15/16” Wrenches REMOVAL OF PARTS FROM TRACTOR 1. Remove any rear mounted attachments which may be installed on your tractor 2. Mark and save all removed parts.
5 12. Assemble the top tubes to the upright tubes using two 1/4" x 1-1/2" hex bolts (from outside) and two 1/4" hex lock nuts (inside). Do not tighten yet.
6 1. Check the area of operation thoroughly before using the tractor with the snow cab. The added height of the snow cab and a reduced field of vision require extra caution during operation. 2. Enter the snow cab on the left side at the rear. Unfasten the elastic hook at the bottom and the velcro fastener in the top in the rear corner.
7 REF. PART QTY. DESCRIPTION NO. NO. 1 64717 1 Base Assembly 2 25014 2 Upright Tube 3 25013 2 Top Tube 4 25012 1 U-Tube 5 25015 3 Support Rod 6 48895 1 Vinyl Canopy 7 25141 1 Drawbar Bracket 8 43720 2.
1-800-800-7310 If you are having difficulty assembling this product or if you have any question regarding the controls, operation or maintenance of this unit, please call the Customer Support Department.
An important point after buying a device Bolens 190-751-OEM (or even before the purchase) is to read its user manual. We should do this for several simple reasons:
If you have not bought Bolens 190-751-OEM yet, this is a good time to familiarize yourself with the basic data on the product. First of all view first pages of the manual, you can find above. You should find there the most important technical data Bolens 190-751-OEM - thus you can check whether the hardware meets your expectations. When delving into next pages of the user manual, Bolens 190-751-OEM you will learn all the available features of the product, as well as information on its operation. The information that you get Bolens 190-751-OEM will certainly help you make a decision on the purchase.
If you already are a holder of Bolens 190-751-OEM, but have not read the manual yet, you should do it for the reasons described above. You will learn then if you properly used the available features, and whether you have not made any mistakes, which can shorten the lifetime Bolens 190-751-OEM.
However, one of the most important roles played by the user manual is to help in solving problems with Bolens 190-751-OEM. Almost always you will find there Troubleshooting, which are the most frequently occurring failures and malfunctions of the device Bolens 190-751-OEM along with tips on how to solve them. Even if you fail to solve the problem, the manual will show you a further procedure – contact to the customer service center or the nearest service center
