

User's Guide

Lexmark and Lexmark with diamond design are trademarks of Lexmark International, Inc., registered in the United States and/or other countries. All other trademarks are the property of their respective owners.
© 2007 Lexmark International, Inc. All rights reserved. 740 West New Circle Road Lexington, Kentucky 40550

Important safety information Use only the power supply and power supply cord provided with this product or the manufacturer's authorized replacement power supply and power supply cord. Connect the power supply cord to a properly grounded electrical outlet that is near the product and easily accessible. Refer service or repairs, other than those described in the user documentation, to a professional service person. This product is designed, tested, and approved to meet strict global safety standards with the use of specific Lexmark components. The safety features of some parts may not always be obvious. Lexmark is not responsible for the use of other replacement parts.
SAVE THESE INSTRUCTIONS.
Operating system notice All features and functions are operating system-dependent. For complete descriptions:




Record the following information (located on the store receipt and the back of the printer), and have it ready when you contact us so that we may serve you faster:

Checking the box contents

These instructions apply only if you received one or more additional language control panels with the printer.
1 Lift and remove the control panel (if one is installed).

2 Choose the correct control panel for your language.
3 Align the clips on the control panel with the holes on the printer, and then press down.


For complete networking information, please refer to the Getting Started booklet that came with the product.
Follow the instructions for the networking method you want to use. Make sure the selected network is set up and working properly, and that all relevant devices are turned on. For more information on your specific network, see your network documentation or consult the person who set up the network.
The printer you purchased may contain an internal wireless print server that allows the printer to be used on a wireless network. If your printer does not have an internal wireless print server already installed, you can purchase one separately. Use the following instructions to install the internal wireless print server:
1 Turn off your printer, and then unplug the power cord from the wall outlet.
2 Remove the back cover plate by pushing the tab down and then pulling the cover away from the printer.

3 Unpack the internal wireless print server. Save the packaging materials.

4 Align the edges of the internal wireless print server with the guides on the left and right, and then slide the wireless print server into the printer until it snaps into place.

5 Make sure the antenna points up.
6 Attach the adhesive label with the MAC address to the back of the printer. You will need this later to in order to network the printer.
You are now ready to configure the internal wireless print server to work on your wireless network.
In order to complete the network configuration of your printer, you may need the media access control (MAC) address of the printer or print server. The MAC address is a series of letters and numbers located on the back of your printer.
If you purchased the internal wireless print server separately, the MAC address appears on an adhesive label that came with the wireless print server. Attach the adhesive label to your printer so you will be able to find the MAC address when you need it.

Understanding the parts of the printer
1 Paper support Load paper.
2 Wi-Fi indicator Check wireless status:
3 PictBridge port Connect a PictBridge-enabled digital camera or a flash drive to the printer.
4 Memory card slots Insert a memory card.
5 Control panel Operate the printer. For more information, see “Using the control panel” on page 17.
6 Paper exit tray Hold paper as it exits.
7 Paper feed guard Prevent items from falling into the paper slot.
8 Paper guide Keep paper straight when feeding.
9 Top cover Access the scanner glass.
10 Scanner glass Copy or remove an item.
Use the To


2 Print cartridge carrier Install, replace, or remove a print cartridge.
3 Lexmark N2050 (internal wireless print server) Connect the printer to a wireless network.
4 USB port Connect the printer to a computer using a USB cable.
5 Power supply with port Connect the printer to a power source.
The display shows:



2 Copy Mode Access the copy default screen and make copies.
3 Scan Mode Access the scan default screen and scan documents.
4 Photo Card Access the photo default screen and print photos.
5 Settings Access the settings default screen and change printer settings.
6 Lighter / Darker Adjust the brightness of a copy or photo.
7 Display the Copy, Scan, or Photo Card menu, depending on which mode is selected.

3 2 1 4 5
Press To · Press To


1 Start Color Start a color copy, scan, or photo print job, depending on which mode is selected.
2 Start Black Start a black-and-white copy, scan or photo print job, depending on which mode is selected.
To access and navigate the Copy menu:
1 From the control panel, press Copy Mode.
The copy default screen appears.
2 If you do not want to change a setting, press Start Color or Start Black.
3 If you want to change a setting, press .
4 Press or repeatedly until the menu item you want appears.
5 Press .
6 Press or repeatedly until the submenu item you want or the setting you want appears.
7 Press .
8 To go into additional submenus and settings, repeat step 6 and step 7 as needed.
9 If necessary, press repeatedly to return to the previous menus and make other setting selections.
10 Press Start Color or Start Black.
Press To

Copies* Specify how many copies to print.
Lighter / Darker* Adjust the brightness of a copy.
Quality* Adjust the quality of a copy.
Paper Setup Specify the size and type of the paper loaded.
Repeat Image* Choose how many copies of an image to print on a page.
Collate Print one or more copies in the correct order.
N-Up* Choose how many pages to print on a page.
Original Size* Specify the size of the original document.
Original Type* Specify the type of the original document.
* Temporary setting. For information on saving temporary and other settings, see “Saving settings” on page 25.
To access and navigate the Scan menu:
1 From the control panel, press Scan Mode.
The scan default screen appears.
2 Press or repeatedly until the scan destination you want appears.
3 If you do not want to change a setting, press Start Color or Start Black.
4 If you want to change a setting, press .
5 Press or repeatedly until the menu item you want appears.
6 Press .
7 Press or repeatedly until the submenu item you want or the setting you want appears.
8 Press .
9 To go into additional submenus and settings, repeat step 7 and step 8 as needed.
10 If needed, press repeatedly to return to the previous menus and make other setting selections.
11 Press Start Color or Start Black.
Use this To

Quality* Adjust the quality of a scan.
Original Size* Specify the size of the original document.
* Temporary setting. For information on saving temporary and other settings, see “Saving settings” on page 25.
1 If necessary, press Photo Card, or insert a memory card or a flash drive into the printer.
2 Press or repeatedly until the menu item you want appears.
3 Press .
4 Press or repeatedly until the submenu item you want or the setting you want appears.
5 Press .
6 To go into additional submenus and settings, repeat step 4 and step 5 as needed.
7 If necessary, press repeatedly to return to the previous menus and make other setting selections.
8 Press Start Color or Start Black.
Proof Sheet Print and then scan a proof sheet:
Print Photos Print photos directly from a memory card or flash drive.
Lighter/Darker Adjust brightness of printed photos.
Photo Effects1 Apply automatic image enhancement or color effects to your photos.
Paper Setup1, 2 Specify the size and type of the paper loaded.
Photo Size1, 2 Specify the size photo you want.
Layout1 Select borderless or bordered, center one photo on a page, or specify the number of photos to print on a page.
Quality1 Adjust the quality of printed photos.
1 Setting will return to factory default setting when a memory card or flash drive is removed.
2 Setting must be saved individually. For more information, see “Saving Paper Size, Paper Type, and Photo Size settings” on page 22.
Use this To · Menu item Action

1 From the control panel, press Settings.
2 Press or repeatedly until Paper Setup appears.
3 Press .
4 Press or repeatedly until Paper Size appears.
5 Press .
6 Press or repeatedly until the size you want appears.
7 Press .
8 Press to go to the Paper Type submenu.
9 Press .
10 Press or repeatedly until the setting type you want appears.
11 Press .
12 Press repeatedly until Defaults appears.
13 Press .
14 Press or repeatedly until Photo Print Size appears.
15 Press .
16 Press or repeatedly until the setting you want appears.
17 Press .
The PictBridge default settings menu lets you select printer settings if you did not specify the settings beforehand on your digital camera. For more information on making camera selections, see the documentation that came with your camera.
1 Connect a PictBridge-enabled digital camera to the printer. a Insert one end of the USB cable into the camera.


The message, PictBridge camera detected. Press to change settings. appears on the display.
2 Press or repeatedly until the menu item you want appears.
3 Press .
4 Press or repeatedly until the submenu item you want or the setting you want appears.
5 Press .
6 To go into additional submenus and settings, repeat step 4 and step 5 as needed.
7 If necessary, press repeatedly to return to the previous menus and make other setting selections.
Paper Setup1, 2 Specify the size and type of paper loaded.
Photo Size1, 2 Specify the size of printed photos.
Layout1 Center one photo on a page, or specify the number of photos to print on a page.
Quality1 Adjust the quality of printed photos.
1 Setting will return to factory default setting when the PictBridge-enabled digital camera is removed.
2 Setting must be saved individually. For more information, see “Saving Paper Size, Paper Type, and Photo Size settings” on page 22.
1 From the control panel, press Settings.
2 Press or repeatedly until the menu item you want appears.
Menu Item Action

3 Press .
4 Press or repeatedly until the submenu item you want or the setting you want appears.
5 Press .
6 To go into additional submenus and settings, repeat step 4 and step 5 as needed.
7 If necessary, press repeatedly to return to the previous menus and make other selections.
From here You can
Maintenance Select:
Paper Setup Select the size and type of paper loaded.
Device Setup Select:
Defaults Select:
Network Setup Select:

In a setting menu, an * appears next to the default setting. To change the setting:
1 Press or repeatedly until the setting you want appears.
Copy Mode – Copies – Resize – Lighter/Darker – Quality – Repeat Image – N-Up – Original Size – Original Type
Scan Mode – Quality – Original Size – Resize
Photo Card The following Photo Card settings will not time out after two minutes of inactivity or turning off the power but will return to the factory default settings when a memory card or flash drive is removed.
– Photo Effects – Photo Size – Layout – Quality
To change the timeout feature:
a Press Settings.
b Press or repeatedly until Device Setup appears.
c Press .
d Press or repeatedly until Clear Settings Timeout appears.
e Press .
f Press or repeatedly until Never appears.
g Press .
3 To change one or more temporary settings into new default settings: a Press Settings.
b Press or repeatedly until Defaults appears.

c Press .
d Press or repeatedly until Set Defaults appears.
e Press .
f Press or repeatedly until Use Current appears.
g Press .

This chapter tells how to use the printer with Windows operating systems. If you are using a Macintosh operating system, see the Mac Help:
1 From the Finder desktop, double-click the Lexmark 3500-4500 Series folder.
2 Double-click the printer Help icon.
Use this software To
The Lexmark Imaging Studio Preview, scan, copy, print, or fax documents or photos.
The Solution Center Find troubleshooting, maintenance, and cartridge ordering information.
Printing Preferences Select the best print settings for the document you are printing.
The Toolbar Create printer-friendly versions of active Web pages.
To open the Lexmark Imaging Studio Welcome screen, use one of these methods:
Method 1 Method 2
From the desktop, double-click the Lexmark Imaging Studio icon.
1 Click Start Programs or All Programs Lexmark 3500-4500 Series. 2 Select Lexmark Imaging Studio.
Click the Lexmark Imaging Studio icon for the task you want to complete.
Fax Send a photo or document as a fax.
E-mail Send a document or photo as an attachment to an e-mail message.
Click To Details

View/Print Photo Library Browse, print, or share your photos.
Transfer Photos Download photos from a memory card, flash drive, CD, or PictBridge-enabled digital camera to the Photo Library.
Photo Greeting Cards Make quality greeting cards from your photos.

Photo Packages Print multiple photos in various sizes.
Slideshow View your photos in motion.

Poster Print your photos as a multiple-page poster.
From the bottom left corner of the Welcome screen,
Setup and manage faxes Set printer fax settings for:
The Solution Center provides help, as well as information about the printer status and ink levels.
Click To Details · Click To

To open the Solution Center, use one of these methods:
Method 1 Method 2
1 From the desktop, double-click the Lexmark Imaging Studio icon. 2 Click Setup and diagnose printer. The Solution Center appears with the Maintenance tab open.
1 Click Start Programs or All Programs Lexmark 3500-4500 Series. 2 Select Solution Center.
The Solution Center consists of six tabs:
From here You can

From here You can
Printing Preferences is the software that controls the printing function when the printer is connected to a computer. You can change the settings in Printing Preferences based on the type of project you want to create. You can open Printing Preferences from almost any program:
1 With a document open, click File Print.
2 From the Print dialog, click Properties, Preferences, Options, or Setup.

All of the print settings are on the three main tabs of the Printing Preferences software: Quality/Copies, Paper Setup, and Print Layout.
Advanced · Tab Choices

From the Save Settings menu, you can name and save the current Printing Preferences settings for future use. You can save up to six custom settings.
The “I Want To” menu contains a variety of task wizards (printing a photo, an envelope, a banner, a poster, or printing on both sides of the paper) to help you select the correct print settings for a project.
Use the “Options” menu to make changes to the Quality Options, Layout Options, and Printing Status Options settings. For more information on these settings, open the tab dialog from the menu, and then click the Help button on the dialog.
The “Options” menu also provides direct links to different parts of the Solution Center as well as software version information.
The Toolbar lets you create printer-friendly versions of Web pages.

Normal Print an entire Web page in normal quality.
Tab Choices · Click To

Quick Print an entire Web page in draft quality.
Black and White Print an entire Web page in black and white.
Print only the text of a Web page.
Print only the photos or images on a Web page.
Preview a Web page before printing.
1 Click Start Settings Printers or Printers and Faxes.
2 Right-click the Lexmark 3500-4500 Series icon.
3 Click Printing Preferences.
4 Click the Save Settings menu.
5 From the Restore section, select Factory Settings (Defaults).
Control Panel Printer.
2 Right-click the Lexmark 3500-4500 Series icon.
3 Click Printing Preferences.

4 Click the Save Settings menu.
5 From the Restore section, select Factory Settings (Defaults).

Loading paper
2 Before loading paper the first time, slide the paper guides out toward the edges of the paper support.
3 Load the paper vertically in the center of the paper support, and adjust the paper guides to rest against the edges of the paper.
Load up to Make sure
25 sheets of heavyweight matte paper 25 sheets of photo paper 25 sheets of glossy paper

Load up to Make sure
– Do not load envelopes with holes, perforations, cutouts, or deep
embossing. – Do not use envelopes that have exposed flap adhesive. – Envelopes require more drying time. Remove each envelope as it
exits, and allow it to dry to avoid ink smudging.

Load up to Make sure
25 greeting cards 25 index cards 25 photo cards
– 76.2–215.9 mm – 3.0–8.5 inches
Length:
25 postcards


You can scan and then print photos, text documents, magazine articles, newspapers, and other publications. You can scan a document for faxing.
1 Make sure the computer and the printer are on.
2 Open the top cover.


3 Place the original document or item facedown on the scanner glass in the upper left corner.

4 Close the top cover to avoid dark edges on the scanned image.


Printing a document
1 Load paper.
2 With a document open, click File Print.
3 Click Properties, Preferences, Options, or Setup.
4 Adjust the settings.
5 Click OK.
6 Click OK or Print.
1 Load paper.
2 With your image open, click File Print.
3 Click Properties, Preferences, Options, or Setup.
4 Click the Quality/Copies tab.
5 From the Quality/Speed section, select Photo.
6 From the Paper Type section, select Use printer sensor to let the printer select the paper type for you.
7 From the drop-down menu, select a glossy or heavyweight matte paper.
8 Click OK.
9 Click OK or Print.
You can use the Toolbar to create a printer-friendly version of any Web page.
1 Load paper.
2 Open a Web page using Microsoft Internet Explorer 5.5 or later.
3 If you want to check or change your print settings: a From the toolbar area, click Lexmark Page Setup. b Adjust the print settings. c Click OK.

4 If you want to view the Web page before printing: a Click Preview. b Use the toolbar options to scroll between pages, zoom in or out, or select whether to print text and images or text only. c Click:
1 Load paper. For best results, use photo or heavyweight matte paper, with the glossy or printable side facing you. (If you are not sure which side is the printable side, see the instructions that came with the paper.)
2 Open a Web page with Microsoft Internet Explorer 5.5 or later.
On the Toolbar, the number of photos valid for printing appears next to Photos.
3 If no number appears next to Photos: a From the Lexmark logo drop-down menu, select Options. b Select the Advanced tab. c Select a lower minimum photo size. d Click OK.
The number of photos valid for printing appears next to Photos.
4 Click Photos.
The Fast Pics dialog appears.
5 If you want to print all the photos or images using the same settings, select the size you want, the blank paper size in the printer, and the number of copies.
6 If you want to print one photo or image at a time: a Click the photos or images you do not want to print to deselect them. b To make common editing changes:
1 Right click the photo or image. 2 Click Edit. 3 Make your selections. 4 Follow the instructions on the screen. 5 When you are finished making changes, click Done. 6 Select the size you want, the blank paper size in the printer, and the number of copies.
7 Click Print Now.

If you print multiple copies of a document, you can choose to print each copy as a set (collated) or to print the copies as groups of pages (not collated).
1 Load paper.
2 With a document open, click File Print.
3 Click Properties, Preferences, Options, or Setup.
4 From the Quality/Copies tab, select the number of copies to print.
5 Select the Collate Copies check box.
6 If you want to print with reverse page order, select the Print Last Page First check box.
7 Click OK.
8 Click OK or Print.
1 Load paper.
2 With a document open, click File Print.
3 Click Properties, Preferences, Options, or Setup.
4 From the Quality/Copies tab, select Print Last Page First.
5 Click OK.
6 Click OK or Print.
1 Load transparencies.
2 With a document open, click File Print.
3 Click OK or Print.
1 Load envelopes.
2 From the software application, click File Print.
3 Click Properties, Preferences, Options, or Setup.
Collated Not collated

4 From the “I Want To” menu, select Print on an envelope.
5 From the Envelope Size list, select the envelope size loaded.
6 Select Portrait or Landscape orientation.
7 Click OK.
8 Click OK.
9 Click OK or Print.
1 Load greeting cards, index cards, or postcards.
2 From the software application, click File Print.
3 Click Properties, Preferences, Options, or Setup.
4 Select a Quality/Speed setting.
Select Photo for photos and greeting cards and Normal for other types of cards.
5 Select the Paper Setup tab.
6 Select Paper.
7 From the Paper Size list, select a card size.
8 Click OK.
9 Click OK or Print.
1 Load paper.
2 With a document open, click File Print.
3 Click Properties, Preferences, Options, or Setup.

4 From the Print Layout tab, select N-up.

5 Select the number of pages to print on each page.
6 If you want each page image to be surrounded by a border, select Print Page Borders.
7 Click OK.
8 Click OK or Print.
1 Insert a memory card into a card slot or a flash drive into the PictBridge port on the front of the printer.
If there are only Microsoft Office files stored on the memory card or flash drive, the printer automatically switches to File Print mode. Only Microsoft Office files that have file name extensions DOC, XLS, PPT, PDF, and RTF are recognized.
a If necessary, press or repeatedly until Documents appears.
b Press .
2 If the document you want to print is in a subfolder within the memory card or flash drive, press repeatedly until the folder you want appears.
3 Press or repeatedly until the file name of the document you want to print appears.
4 Press Start Color or Start Black.

2 Wait for the light located above the memory card slots on the printer to come on. The light blinks to indicate the memory card is being read or is transmitting data.
Slots Memory card


When the printer recognizes that a memory card is installed, the message Memory Card Detected appears.
If the printer does not read the memory card, remove and reinsert it. For more information, see “Memory card troubleshooting” on page 92.
1 Insert the flash drive into the PictBridge port on the front of the printer.
2 Wait for the printer to recognize that a flash drive is installed. When the flash drive is recognized, the message USB Flash Drive Detected appears.
If the printer does not read the flash drive, remove and reinsert it.


Transferring photos from a memory device to the computer using the control panel
If the printer is connected directly to a computer, or connected to a computer through a wireless network connection, you can transfer photos from a memory card or flash drive to the computer.
1 Insert a memory card or a flash drive that contains the images you want to transfer. For more information, see “Inserting a memory card” on page 44 or “Inserting a flash drive” on page 45.
2 Press or repeatedly until Save Photos appears.
3 Press .
4 If needed, press or repeatedly until Computer appears.
5 Follow the instructions on the computer screen.
1 Insert a memory card into the printer with the label facing the printer control panel. If the computer is connected to a wireless network, you may need to select the printer.
The Lexmark Imaging Studio software launches automatically on your computer.
2 Click Automatically save all photos to “My Pictures”.
3 If you want to erase the photos from the memory card, click Yes.
4 Click Done. Remove the memory card to view your transferred photos in the Photo Library.

1 Insert a memory card into the printer with the label facing the printer control panel.
The Lexmark Imaging Studio software launches automatically on your computer.
2 Click Select photos to save.
3 Click Deselect All.
4 Click to select the photo(s) you want to transfer.
5 Click Next.
6 If you want to save the photos to the default folder, click Next.
7 If you want to save the photos in a folder other than the default folder: a Click Browse. b Select the folder you want. c Click OK.
8 If you want to assign a prefix to all of the photos you just transferred, click the check box and enter a name.
9 Click Next.
10 If you want to erase the photos from the memory card, click Yes.
11 Click Done. Remove the memory card to view your transferred photos in the Photo Library.
1 Insert a CD into the computer or a flash drive into the printer. For more information, see “Inserting a flash drive” on page 45.
The Lexmark Imaging Studio software launches automatically on your computer.
2 If you are using Windows XP, a “What do you want Windows to do?” screen appears.
Click Transfer Photos to your computer using the Lexmark Imaging Studio.
3 If you are using Windows 2000: a From the desktop, double-click the Lexmark Imaging Studio icon. b Click Transfer Photos.
4 Click Automatically save all photos to “My Pictures”.
5 Remove the flash drive or CD to view your transferred photos in the Photo Library.

1 Insert a CD into the computer or a flash drive into the printer. For more information, see “Inserting a flash drive” on page 45.
The Lexmark Imaging Studio software launches automatically on your computer.
2 If you are using Windows XP, a “What do you want Windows to do?” screen appears.
Click Transfer Photos to your computer using the Lexmark Imaging Studio.
3 If you are using Windows 2000: a From the desktop, double-click the Lexmark Imaging Studio icon. b Click Transfer Photos.
4 Click Select photos to save.
5 Click Deselect All.
6 Click to select the photo(s) you want to transfer.
7 If you want to save the photos to the default folder, click Next.
8 If you want to save the photos in a folder other than the default folder: a Click Browse. b Select the folder you want. c Click OK.
9 If you want to assign a prefix to all of the photos you just transferred, click the check box and enter a name.
10 Click Next.
11 Remove the CD or flash drive to view your transferred photos in the Photo Library.
1 Insert a memory card that contains the images you want to transfer. For more information, see “Inserting a memory card” on page 44.
2 Insert a flash drive into the PictBridge port on the front of the printer. For more information, see “Inserting a flash drive” on page 45.
Which device is to be displayed? appears on the display.
3 Press or repeatedly until Camera Card or the specific type of your camera card appears.
4 Press .
5 Press or repeatedly until Save Photos appears.
6 Press .
7 If needed, press or repeatedly until the setting you want appears.

8 Press Start Color or Start Black.
1 Load plain letter or A4 size paper.
2 Insert a memory card or flash drive that contains the images you want to print. For more information, see “Inserting a memory card” on page 44 or “Inserting a flash drive” on page 45.
3 Press or repeatedly until Proof Sheet appears.
4 Press .
5 Press or repeatedly until Print Proof Sheet appears.
6 Press .
7 Press or to specify which category of photos you want to print.
You can print a proof sheet:
8 Press .
9 Press again.
One or more proof sheets print.
10 Follow the instructions on the proof sheet to select which photos to print, number of copies, red eye reduction, page layout, print options, and paper size.
11 Load the proof sheet facedown on the scanner glass. For more information, see “Loading original documents on the scanner glass” on page 37.
12 If needed, press or repeatedly until Scan Proof Sheet appears.
13 Press .
14 Press Start Color or Start Black to scan the proof sheet.

15 Load photo paper with the glossy or printable side facing you. (If you are not sure which side is the printable side, see the instructions that came with the paper.) For more information, see “Loading paper” on page 34.
16 Press Start Color or Start Black to print your photos.
1 Load photo paper with the glossy or printable side facing you. (If you are not sure which side is the printable side, see the instructions that came with the paper.) For more information, see “Loading paper” on page 34.
2 Insert a memory card or flash drive that contains the images you want to print. For more information, see “Inserting a memory card” on page 44 or “Inserting a flash drive” on page 45.
3 Press or repeatedly until Print Photos appears.
4 Press .
5 Press or repeatedly until Print All Photos appears.
6 Press Start Color or Start Black.
The print settings used on the print job are displayed sequentially on the second line of the display.
7 Press Start Color or Start Black again.
You can print photos using the numbers assigned to them on a photo proof sheet. If you want to print photos by photo number, you must first print a proof sheet. For more information, see “Printing photos stored on a memory device using the proof sheet” on page 49.
1 Load photo paper with the glossy or printable side facing you. (If you are not sure which side is the printable side, see the instructions that came with the paper.) For more information, see “Loading paper” on page 34.
2 Insert a memory card or flash drive that contains the images you want to print. For more information, see “Inserting a memory card” on page 44 or “Inserting a flash drive” on page 45.
3 Press or repeatedly until Print Photos appears.
4 Press .
5 Press or repeatedly until Photo Number appears.
6 Press .
7 Press or repeatedly until the photo number you want appears.
8 Press to select a photo.
9 If you want to select additional photos, press or to reach the number, and then press

10 Press Start Color or Start Black.
The print settings used on the print job are displayed one at a time on the second line of the display.
11 Press Start Color or Start Black again.
1 Load photo paper with the glossy or printable side facing you. (If you are not sure which side is the printable side, see the instructions that came with the paper.) For more information, see “Loading paper” on page 34.
2 Insert a memory card or flash drive that contains the images you want to print. For more information, see “Inserting a memory card” on page 44 or “Inserting a flash drive” on page 45.
3 Press or repeatedly until Print Photos appears.
4 Press .
5 Press or repeatedly until Date Range appears.
6 Press .
Dates are displayed by month and year starting with the most recent month.
7 Press or to select the month you want.
8 Press .
9 Press Start Color or Start Black.
The print settings to be used on the print job are displayed sequentially on the second line of the display.
10 Press Start Color or Start Black again.
You can use the control panel to apply color effects to your photos.
1 Load photo paper with the glossy or printable side facing you. (If you are not sure which side is the printable side, see the instructions that came with the paper.) For more information, see “Loading paper” on page 34.
2 Insert a memory card or flash drive that contains the images you want to print. For more information, see “Inserting a memory card” on page 44 or “Inserting a flash drive” on page 45.
3 Press or repeatedly until Photo Effects appears.
4 Press .
5 Press or repeatedly until the color effect you want appears.
6 Press .

Digital Print Order Format (DPOF) is a feature available on some digital cameras. If your camera supports DPOF, you can specify which photos to print, how many of each, and print settings while the memory card is still in the camera. The printer recognizes these settings when you insert the memory card into the printer.
1 Load photo paper with the glossy or printable side facing you. (If you are not sure which side is the printable side, see the instructions that came with the paper.) For more information, see “Loading paper” on page 34.
2 Insert a memory card. For more information, see “Inserting a memory card” on page 44.
3 Press or repeatedly until Print Photos appears.
4 Press .
5 Press or repeatedly until Print DPOF appears.
6 Press Start Color or Start Black.
You can connect a PictBridge-enabled digital camera to the printer, and use the buttons on the camera to select and print photos.
1 Insert one end of the USB cable into the camera.
2 Insert the other end of the cable into the PictBridge port on the front of the printer.



camera detected. Press to change settings. If any other message appears, see “Error messages” on page 94. • Values selected within the menu items are the settings used for Pictbridge printing if no explicit selection is made from the camera.
3 Follow the instructions in the camera documentation to select and print photos.
1 From the desktop, double-click the Lexmark Imaging Studio icon.
2 Click View / Print Photo Library.
3 Click to select the photo(s) you want to print.
4 From the Imaging Studio taskbar located at the bottom of the screen, click Photo Prints.
5 From the Quality drop-down list, select a copy quality.
6 From the Paper Size in Printer drop-down list, select the paper size.
7 To select multiple prints of a photo, or to select photo sizes other than 4 x 6 in. (10 x 15 cm), select the options you want in the table. Use the drop-down list in the last column to view and select other sizes.
8 Click Print Now in the bottom right corner of the screen.

1 Load photo paper with the glossy or printable side facing you. (If you are not sure which side is the printable side, see the instructions that came with the paper.) For more information, see “Loading paper” on page 34.
2 Insert a CD or media device into the computer. a If you are using Windows XP or Windows Vista, a “What do you want Windows to do?” screen appears. Click Transfer Photos to your computer using the Lexmark Imaging Studio. b If you are using Windows 2000:
1 From the desktop, double-click the Lexmark Imaging Studio icon. 2 Click Transfer Photos.
3 Click Select photos to print.
4 To print all photos, click Print.
5 To print selected photos, click Deselect All.
6 Click to select the photo(s) you want to print.
7 Click Print.
8 From the Quality drop-down list, select a copy quality.
9 From the Paper Size in Printer drop-down list, select the paper size.
10 To select multiple prints of a photo, or to select photo sizes other than 4 x 6 in. (10 x 15 cm), select the options you want in the table. Use the drop-down list in the last column to view and select other sizes.
11 Click Print Now in the bottom right corner of the screen.
12 Remove the CD or media device.
1 From the desktop, double-click the Lexmark Imaging Studio icon.
2 Click Photo Packages.
3 Click to select the photos you want to include in your photo package.
4 Click Next.
5 From the Quality drop-down list, select a copy quality.
6 From the Paper Size in Printer drop-down list, select the paper size.
7 To select multiple prints of a photo, or to select photo sizes other than 4 x 6 in. (10 x 15 cm), select the options you want in the table. Use the drop-down list in the last column to view and select other sizes.
8 Click Print Now in the bottom right corner of the screen.
1 From the desktop, double-click the Lexmark Imaging Studio icon.
2 Click Photo Greeting Cards.

3 From the Style tab, click to select a style for your greeting card.
4 From the Photo tab, select and drag a photo into the preview pane on the right side of the screen.
5 Click the text area to be able to add text to your photo greeting card.
6 When you have finished editing your text, click OK.
7 If you want to create another photo greeting card using a different style and/or photo, click Add New Card, and repeat step 3 on page 55 through step 6 on page 55.
8 If you want to print your photo greeting card, select Print your Photo Greeting Card from the Share tab.
9 Select the number of copies from the Copies drop-down list.
10 Select the copy quality from the Quality drop-down list.
11 Select the paper size from the Paper Size in Printer drop-down list.
Paper sizes supported Dimensions
A4 210 x 297 millimeters
Letter 8.5 x 11 inches
Greeting cards 4 x 8 inches (10.16 x 20.32 centimeters)
12 Click Print Now.
13 If you want to e-mail your photo greeting card, click E-mail your Photo Greeting Card from the Share tab.
14 From the Send Quality and Speed area of the screen, select the image size.
15 Click Create E-mail to create an e-mail message with your photo greeting card(s) attached.
1 From the desktop, double-click the Lexmark Imaging Studio icon.
2 Click Slideshow.
3 Click and drag your selected photos to the preview pane at the right side of the screen.
4 If you want to scan another photo to put into your slideshow: a Place the photo facedown on the scanner glass. b Click File Add Photo from Scanner. c Repeat this step until all your photos have been scanned.
5 From the Settings tab, select the number of seconds to view each photo in the Time to display each photo drop-down list.
6 If you want to loop (replay) the slideshow, click Yes.
7 Click View Show at the bottom of the right pane. The slideshow is displayed. Click Exit Slideshow on the Slideshow viewer to close the slideshow.
8 From the Share tab, click Save your slideshow if you want to save the slideshow to the “My Pictures” directory.
9 Enter a name in the File Name area of the dialog.
10 Click Save.

11 From the Share tab, click Print your slideshow if you want to print your slideshow.
12 From the Quality drop-down list, select a copy quality.
13 From the Paper Size in Printer drop-down list, select the paper size.
14 To select multiple prints of a photo, or to select photo sizes other than 4 x 6 in. (10 x 15 cm), select the options you want in the table. Use the drop-down list in the last column to view and select other sizes.
15 Click Print Now.
1 Load paper.
2 From the desktop, double-click the Lexmark Imaging Studio icon.
3 From the Printing Creative Tasks area of the Welcome screen, click Poster.
4 If you are scanning a photo: a Place the photo facedown on the scanner glass. b Click File Add Photo from Scanner.
5 If you are not scanning a new item, open the folder that contains your photo.
6 Drag the photo to the Print a Multi-Page Poster preview area of the screen.
7 Click Next Step at the bottom of the left pane.
8 From the “Paper size to print poster on” drop-down list, select a paper size.
9 From the “Print Quality for poster” drop-down list, select the print quality.
10 From the Poster Size drop-down list, select the poster size.
11 If you want to rotate the poster so that it fits better on the printed pages, click Rotate 90 degrees.
12 Click Print Now in the bottom right corner of the screen.


1 Load paper.
2 Load an original document facedown on the scanner glass.
3 From the control panel, press Copy Mode.
4 Press Start Color or Start Black.
Quality specifies the resolution used for the copy job. Resolution involves a dots-per-inch (dpi) count; the higher the dpi count, the higher the resolution and copy quality.
1 Load paper.
2 Load an original document facedown on the scanner glass.
3 If necessary, press Copy Mode.
4 Press .
5 Press or repeatedly until Quality appears.
6 Press .
7 Press or repeatedly until the quality you want appears.
8 Press .
9 Press Start Color or Start Black.

1 Load photo paper with the glossy or printable side facing you. (If you are not sure which side is the printable side, see the instructions that came with the paper.)
2 Place a photo facedown on the scanner glass in the upper left corner. For more information, see “Loading original documents on the scanner glass” on page 37.
3 From the control panel, press Copy Mode.
4 Press .
5 Press or repeatedly until Quality appears.
6 Press .
7 Press or repeatedly until Photo appears.
8 Press .
9 Press or repeatedly until Paper Setup appears.
10 Press .
11 Press or repeatedly until Paper Size appears.
12 Press .
13 Press or repeatedly until the size you want appears.
14 Press .
15 Press or repeatedly until Paper Type appears.
16 Press .
17 Press or repeatedly until the type of paper loaded into the printer appears.
18 Press .
19 Press Start Color or Start Black.
1 Load photo paper with the glossy or printable side facing you. (If you are not sure which side is the printable side, see the instructions that came with the paper.)
2 Place a photo facedown on the scanner glass in the upper left corner. For more information, see “Loading original documents on the scanner glass” on page 37.
3 From the control panel, press Copy Mode.
4 Press .
5 Press or repeatedly until Resize appears.
6 Press .
7 Press or repeatedly until Borderless appears.

8 Press .
9 Press or repeatedly until Paper Setup appears.
10 Press .
11 Press or repeatedly until Paper Size appears.
12 Press .
13 Press or repeatedly until the size you want appears.
14 Press .
15 Press or repeatedly until Paper Type appears.
16 Press .
17 Press or repeatedly until either Automatic or Photo appears.
18 Press .
19 Press Start Color or Start Black.
If you want to adjust the look of a copy or photo, you can adjust it to make it lighter or darker.
1 Load paper.
2 Load an original document facedown on the scanner glass.
3 From the control panel, press Copy Mode.
4 Press Lighter/Darker.
5 Press or repeatedly to adjust the slider.
6 Press .
7 Press Start Color or Start Black.
If you print multiple copies of a document, you can choose to print each copy as a set (collated) or to print the copies as groups of pages (not collated).
1 Load paper.
2 Load an original document facedown on the scanner glass.
Collated Not collated

3 From the control panel, press Copy Mode.
4 Press .
5 Press or repeatedly until Collate appears.
6 Press .
7 Press or repeatedly until On appears.
8 Press Start Color or Start Black.
9 Press to continue copying more pages.
10 After the last page, press or repeatedly until No appears.
11 Press .
You can print the same image multiple times on one sheet of paper. This option is helpful in creating labels, decals, flyers, and handouts.
1 Load paper.
2 Load an original document facedown on the scanner glass.
3 From the control panel, press Copy Mode.
4 Press .
5 Press or repeatedly until Repeat Image appears.
6 Press .
7 Press or repeatedly until the number of images you want to print on one page appears.
8 Press Start Color or Start Black.
1 Load paper.
2 Load an original document or photo facedown on the scanner glass.
3 From the control panel, press Copy Mode.
4 Press .
5 Press or repeatedly until Resize appears.

6 Press .
7 Press or repeatedly until the setting you want appears.
8 Press Start Color or Start Black.
1 Load an original document facedown on the scanner glass.

2 From the desktop, double-click the Lexmark Imaging Studio icon.
3 From the left pane of the Welcome screen, click Copy.
4 Select the Document option.
5 Click Start.
6 From the Copies drop-down list, select the number of copies.
7 From the Quality drop-down list, select the copy quality.
8 From the Paper Size in Printer drop-down list, select the paper size.
9 Select whether you want your document printed in Color, Grayscale, or Black and White by clicking the appropriate option.
10 To adjust the Brightness value, use the Brightness slider.
11 To select a custom print size, enter a number from 25 to 400 in the Print Size box.
You can also make the document fit the page by clicking the Fit to Page option.
12 Click Copy Now in the bottom right corner of the screen.

1 Place the photo facedown on the scanner glass.

2 From the desktop, double-click the Lexmark Imaging Studio icon.
3 From the left pane of the Welcome screen, click Copy.
4 Select Photo.
5 Click Start.
The photo appears in the right pane.
6 From the Quality drop-down list, select the copy quality.
7 From the Paper Size in Printer drop-down list, select the paper size.
8 To select multiple prints of a photo, or to select photo sizes other than 4 x 6 in. (10 x 15 cm), select the options you want in the table. Use the drop-down list in the last column to view and select other sizes.
9 Click Copy Now in the bottom right corner of the screen.


1 Make sure the printer is connected to a computer, and both the printer and the computer are on.
2 Load an original document facedown on the scanner glass.
3 From the control panel, press Scan Mode.
4 Press or repeatedly until the destination to which you want to scan appears.
5 Press Start Color or Start Black.
6 If you are using a Macintosh operating system, you may need to click Scan from the Scan dialog on the computer screen.
7 If you want to save the scanned image, from the software application, click File Save As.
8 Enter the file name, format, and location where you want the scanned image saved.
9 Click Save.
2 Load an original document facedown on the scanner glass.
3 From the control panel, press Scan Mode.
4 Press or repeatedly until the computer to which you want to scan is highlighted.
5 Press .

6 Press or repeatedly until the scan destination you want appears.
7 Press Start Color or Start Black.
1 Load an original document facedown on the scanner glass.

2 From the desktop, double-click the Lexmark Imaging Studio icon.
3 Click Scan.
4 Select the Document option.
5 Click Start.
The scanned document is loaded into your default word processing application. You can now edit the document.
Use the Optical Character Recognition (OCR) software feature to turn scanned images into text you can edit with a word-processing application.
2 Load an original document facedown on the scanner glass.
3 From the desktop, double-click the Lexmark Imaging Studio icon.
4 Click Scan.
5 Select the Document option.
6 Click Start.
The scanned document is loaded into your default word processing application. You can now edit the document.

1 Make sure the printer is connected to a computer, and both the printer and the computer are on.
2 Load an original document facedown on the scanner glass.
3 From the desktop, double-click the Lexmark Imaging Studio icon.
4 Click Scan.
5 Select the Photo or Several Photos option.
6 Click Start.
You can edit the scanned image.
1 Load a photo facedown on the scanner glass.
2 From the desktop, double-click the Lexmark Imaging Studio icon.
3 Click View / Print Photo Library.
4 From the Photo Library Add tab, click Add New Scan.
5 Select the Photo option.
6 Click Start.
The photo is placed in the current folder of the Photo Library.
1 Place the photos facedown on the scanner glass.

2 From the desktop, double-click the Lexmark Imaging Studio icon.
3 Click Scan.

4 Select the Several Photos option.
5 Click Start.
You can e-mail attached images using your default e-mail application.
1 Load an original document facedown on the scanner glass.

2 From the desktop, double-click the Lexmark Imaging Studio icon.
3 Click E-mail.
4 Select the Photo, Several Photos, or Document option.
5 Click Start.
6 If you are scanning a photo, select the Photo Size from the Send Quality and Speed area.
7 Click Create E-mail to have your images attached to an e-mail message.
Descreening helps to remove wavy (moire) patterns from images scanned from magazines or newspapers.
1 Make sure the printer is connected to a computer, and both the printer and the computer are on.
2 Load an original document facedown on the scanner glass.
3 From the desktop, double-click the Lexmark Imaging Studio icon.
4 Click Scan.
5 Select the Photo or Several Photos option.
6 Click Start.
7 Click the Advanced tab.
8 Click Image Patterns.
9 To remove the image patterns caused by scanning from magazines or newspapers, click Remove Patterns.

10 From the drop-down list, select the patterns to be removed.
11 To reduce stray marks on color photos, click the check box, and then move the slider to the desired value.
12 Click OK. The thumbnail is updated.
1 From the desktop, double-click the Lexmark Imaging Studio icon.
2 Click Scan.
3 Click Custom Settings.
4 Change the settings as needed.
Color Depth Select Color, Grey, or Black and White.
Scan Resolution (Dots Per Inch) Select a scan resolution value from the drop-down list.
Select area to be scanned Select the area to be scanned by choosing a paper size from the drop-down list.
Convert the image to text with OCR Convert an image to text.
Always use these settings when scanning
Make your selections permanent by selecting the check box.
Setting Options


Make sure:
You can scan a document to the computer and then fax it to someone using the software.
1 Load an original document facedown on the scanner glass.
2 From the desktop, double-click the Lexmark Imaging Studio icon.
3 From the left pane of the Welcome screen, click Fax.
4 Select the Document option.
5 Click Start.
6 Enter the recipient information, and then click Next.
7 Enter the cover page information, and then click Next.
8 If there are any additional documents that you want to send with your fax, add these now, and then click Next.
10 If you want a paper copy of your fax, select Print a copy of your fax.
11 Click Send.

1 From the desktop, double-click the Lexmark Imaging Studio icon.
2 From the Settings area in the left pane of the Welcome screen, click Setup and manage faxes.
3 From the “I Want To” menu, click Adjust speed dial list and other fax settings.
4 Click the Ringing and Answering tab.
5 From the “Automatically answer incoming calls as a fax” area, select On from the Auto Answer drop-down list.
6 To turn the Auto Answer feature on and off at scheduled times, select the settings you want from the drop-down lists.
7 To set the number of telephone rings before the printer automatically receives faxes, select a setting from the “Pick-up on the” drop-down list in the “Answering on your phone line type” area.
8 Click OK to save the settings.

Changing print cartridges
1 Make sure the printer is on.
2 Lift the scanner unit.
The print cartridge carrier moves and stops at the loading position, unless the printer is busy.

3 Press down on the cartridge carrier lever to raise the cartridge carrier lid.

4 Remove the used print cartridge.
1 If you are installing new print cartridges, remove the sticker and tape from the back and bottom of the cartridges.

2 Press down on the cartridge carrier levers to raise the cartridge carrier lids.

3 Insert the black cartridge or the photo cartridge in the left carrier. Insert the color cartridge in the right carrier.

4 Close the lids.

5 Close the scanner unit, making sure to keep your hands out from underneath the scanner unit.

The control panel display will prompt you to load paper and press to print an alignment page.

If you are not satisfied with the print quality of a document, make sure you:
If the document still does not have the print quality you want, follow these steps:
1 Align the print cartridges. For more information, see “Aligning print cartridges” on page 72.
If print quality has not improved, continue to step 2.
2 Clean the print cartridge nozzles. For more information, see “Cleaning the print cartridge nozzles” on page 72.
If print quality has not improved, continue to step 3.
3 Remove and reinsert the cartridges. For more information, see “Removing a used print cartridge” on page 70 and “Installing print cartridges” on page 70.
If print quality has not improved, continue to step 4.
4 Wipe the print cartridge nozzles and contacts. For more information, see “Wiping the print cartridge nozzles and contacts” on page 73.
If print quality is still not satisfactory, replace the cartridge. For more information, see “Ordering supplies” on page 74.
1 Load plain paper.
2 From the control panel, press Settings.
3 Press or repeatedly until Maintenance appears.
4 Press .
5 Press or repeatedly until Align Cartridges appears.
6 Press .
An alignment page prints.
If you aligned the cartridges to improve print quality, print your document again. If print quality has not improved, clean the print cartridge nozzles.
1 Load plain paper.
2 Press Settings.
3 Press or repeatedly until Maintenance appears.
4 Press .

5 Press or repeatedly until Clean Cartridges appears.
6 Press .
A page prints, forcing ink through the print cartridge nozzles to clean them.
7 Print the document again to verify that the print quality has improved.
8 If print quality has not improved, try cleaning the nozzles up to two more times.
1 Remove the print cartridges.
2 Dampen a clean, lint-free cloth with water.
3 Gently hold the cloth against the nozzles for about three seconds, and then wipe in the direction shown.
4 Using another clean section of the dampened cloth, gently hold the cloth against the contacts for about three seconds, and then wipe in the direction shown.
5 With another clean section of the dampened cloth, repeat step 3 and step 4.
6 Let the nozzles and contacts dry completely.
7 Reinsert the print cartridges.
8 Print the document again.
9 If the print quality does not improve, clean the print nozzles. For more information, see “Cleaning the print cartridge nozzles” on page 72.

10 Repeat step 9 up to two more times.
11 If print quality is still not satisfactory, replace the print cartridges.

1 Dampen a clean, lint-free cloth with water.
2 Gently wipe the scanner glass clean.
Lexmark 3500-4500 Series models (except Lexmark 3580 and Lexmark 4580)

Item Part number Average cartridge standard page yield is up to1
1 Values obtained by continuous printing. Declared yield value in accordance with ISO/IEC 24711 (FDIS).
Lexmark 3580 and Lexmark 4580 models

To order supplies or to locate a dealer near you, visit our Web site at www.lexmark.com.
Lexmark N2050 (Internal wireless print server)
For more information, go to www.lexmark.com.
For information on how to purchase Lexmark Premium Photo Paper, Lexmark Photo Paper, or Lexmark PerfectFinish Photo Paper in your country or region, go to www.lexmark.com.
Lexmark printers, print cartridges, and photo paper are designed to perform together for superior print quality.

If you receive an Out of Original Lexmark Ink message, the original Lexmark ink in the indicated cartridge (s) has been depleted.
If you believe you purchased a new, genuine Lexmark print cartridge, but the Out of Original Lexmark Ink message appears:
1 Click Learn More on the message.
2 Click Report a non-Lexmark print cartridge.
To prevent the message from appearing again for the indicated cartridge(s):
Lexmark's warranty does not cover damage caused by non-Lexmark ink or print cartridges.
The warranty does not cover repair of failures or damage caused by a refilled cartridge. Lexmark does not recommend use of a refilled cartridge. Refilling a cartridge can affect print quality and may cause damage to the printer. For best results, use Lexmark supplies.
To return Lexmark products to Lexmark for recycling:
1 Visit our Web site at www.lexmark.com/recycle.
2 Follow the instructions on the computer screen.

These are possible solutions. Try one of the following:
After you select a language, Language appears again on the display. To change the selection:
1 Press or repeatedly until the language you want appears on the display.
2 Press to save.
1 From the control panel, press Settings.
2 Press or repeatedly until Device Setup appears.
3 Press .
4 Press or repeatedly until Language appears.
5 Press .
6 Press or repeatedly until the language you want appears on the display.
7 Press to save.

These are possible solutions. Try one or more of the following:
Make sure the printer is on by pressing .
1 Disconnect the power cord from the wall outlet, and then from the printer.
2 Plug the cord all the way into the power supply on the printer.
3 Plug the cord into an electrical outlet that other electrical devices have been using.
4 If the light is not on, press .
These are possible solutions. Try one or more of the following:
The following operating systems are supported: Windows 2000, Windows XP, Windows Vista, and Mac OS X.
Check that your computer meets the minimum system requirements listed on the printer box.
1 Check the USB cable for any obvious damage.
2 Firmly plug the square end of the USB cable into the back of the printer.
3 Firmly plug the rectangular end of the USB cable into the USB port of the computer.
The USB port is marked with the USB symbol.
Check that the Wi-Fi indicator light is on. For more information see, “Understanding the parts of the printer” on page 16.

1 Turn off and then restart your computer.
2 Click Cancel on all New Hardware Found screens.
3 Insert the CD, and then follow the instructions on the computer screen to reinstall the software.
1 Press to turn the printer off.
2 Disconnect the power cord from the wall outlet.
3 Gently remove the power supply from the printer.
4 Reconnect the power supply to the printer.
5 Plug the power cord into the wall outlet.
6 Press to turn the printer on.
1 Close all open software applications.
2 Disable any anti-virus programs.
3 Double-click the My Computer icon.
In Windows XP, click Start to access the My Computer icon.
4 Double-click the CD–ROM drive icon.
5 If necessary, double-click setup.exe.
6 Follow the instructions on the computer screen to install the software.
Uninstall the printer software, and then reinstall it. For more information, see “Removing and reinstalling the software” on page 100.
These are possible solutions. Try one or more of the following:
If an error message is displayed, see “Error messages” on page 94.
If the light is not on, see “Power button is not lit” on page 78.
Remove and then load paper.
Check the ink levels, and install new print cartridges if necessary.

1 Remove the print cartridges.
2 Make sure the sticker and tape have been removed.
3 Reinsert the cartridges.
Control Printers (under Hardware and Sound). • In Windows Vista (Classic Start menu):
Printers.
2 Double-click the printer queue device.
1 Press to turn the printer off.
2 Disconnect the power cord from the wall outlet.
3 Gently remove the power supply from the printer.
4 Reconnect the power supply to the printer.
5 Plug the power cord into the wall outlet.
6 Press to turn the printer on.
Uninstall the printer software, and then reinstall it. For more information, see “Removing and reinstalling the software” on page 100.
These are possible solutions. Try one or more of the following:
Enable PictBridge printing on the camera by selecting the correct USB mode. For more information, see the digital camera documentation.

1 Disconnect the camera.
2 Connect a PictBridge-enabled digital camera to the PictBridge port. See the digital camera documentation to determine whether it is PictBridge-enabled.
Use only the USB cable that came with the camera.
Remove any memory cards from the printer.
If an error message appears on the display, see “Error messages” on page 94.
Partial 4 x 6 in. (10 x 15 cm) photo prints when using a PictBridge-enabled digital camera
1 Insert the USB cable that came with your camera to the camera, and insert the other end into the PictBridge port on the front of the printer. 2 Turn the camera on and choose your first photo using the camera control panel. 3 Wait for PictBridge Printing to appear on the display of the printer control panel.
4 Press .

5 Press or repeatedly until Photo Size appears.
6 Press .
7 Press or repeatedly until 4 x 6 in. or 10 x 15 cm appears.
8 Press .
9 Press or repeatedly until Paper Setup appears.
10 Press .
11 Press or repeatedly until Paper Size appears.
12 Press .
13 Press or repeatedly until 10 x 15 cm appears.
14 Press . 15 Press Start Color or Start Black.
These are possible solutions. Try one or more of the following:
1 Depending on your print job, press Copy Mode, Scan Mode, or Photo Card.
2 Press .
3 Press or repeatedly until Quality appears.
4 Press .
5 Press or repeatedly until the quality you want appears.
6 Press .
If the document still does not have the print quality you want, follow these steps:
1 Align the print cartridges. For more information, see “Aligning print cartridges” on page 72.
If print quality has not improved, continue to step 2.
2 Clean the print cartridge nozzles. For more information, see “Cleaning the print cartridge nozzles” on page 72.
If print quality has not improved, continue to step 3.

3 Remove and reinsert the print cartridges. For more information, see “Removing a used print cartridge” on page 70 and “Installing print cartridges” on page 70.
If print quality has not improved, continue to step 4.
4 Wipe the print nozzles and contacts. For more information, see “Wiping the print cartridge nozzles and contacts” on page 73.
If print quality is still not satisfactory, replace the print cartridges. For more information, see “Ordering supplies” on page 74.
These are possible solutions. Try one or more of the following:
Check the ink levels, and install new print cartridges if necessary.
See “Improving print quality” on page 82.
To avoid ink smudging when you are working with the following media, remove each sheet as it exits, and allow it to dry:
Each paper brand accepts ink differently and prints with color variations. If you are printing photos or other high-quality images, for best results use Lexmark Premium Photo Paper or Lexmark Photo Paper.
Use only new, unwrinkled paper.
Software may not be installed correctly. For more information, see “Removing and reinstalling the software” on page 100.

These are possible solutions. Try one or more of the following:
Unless you are using the borderless feature, use these minimum print margin settings:
1 From the software application, click File Print.
2 Click Properties, Preferences, Options, or Setup.
3 Click Print Layout.
4 Click Borderless.
1 Press .
2 Press or repeatedly until Resize appears.
3 Press .
4 Press or repeatedly until Borderless appears.
5 Press .
6 Press Start Color or Start Black, or press to return to the Copy menu to select the number of copies you want.
1 Press .
2 Press or repeatedly until Layout appears.
3 Press .
4 Press or repeatedly until Borderless appears.
5 Press .
6 Press Start Color or Start Black, or press to return to the Photo Card menu to select the photos you want to print.
Borderless printing requires photo paper. Small margins are printed when you select the Borderless feature when you are printing on plain paper.

1 From the software application, click File Print.
2 Click Properties, Preferences, Options, or Setup.
3 Click Paper Setup.
4 Check the paper size.
These are possible solutions. Try one or more of the following:
Consider purchasing more RAM.
1 From the software application, click File Print.
2 Click Properties, Preferences, Options, or Setup.
3 Click Quality/Copies.
4 From the Quality/Speed area, select a lower print quality.
For more information, see “Removing and reinstalling the software” on page 100.
These are possible solutions. Try one or more of the following:
Make sure the document or photo is loaded facedown on the scanner glass in the upper left corner.
Make sure the paper size being used matches the document or photo size you selected.
To prevent smudging, avoid touching the surface of a printed photo. For best results, remove each printed sheet individually from the paper exit tray, and allow the prints to dry at least 24 hours before stacking, displaying, or storing.
There are possible solutions. Try one or more of the following:
When you print documents with a large number of graphics, or with the Photo Quality/Speed setting, the printer uses more ink. The type of documents you print and the print quality you select affect the amount of ink the printer uses.

The ink levels displayed in the printer software are not updated during a print job; they represent the ink level at the beginning of a print job. The ink levels may seem inconsistent in the Printing Status window when you are printing a large file.
These are possible solutions. Try one or more of the following:
Because photos and graphics require more ink than text documents, ink usage increases when you print photos or graphics.
To reduce ink usage, select Best only when you are printing on photo or heavyweight matte paper. All other paper types print best at a lower Quality/Speed setting. Use the Quick Print or Normal setting to print most text documents.
These are possible solutions. Try one or more of the following:
If an error message is displayed, see “Error messages” on page 94.
If the light is not on, see “Power button is not lit” on page 78.
For more information, see “Removing and reinstalling the software” on page 100.
1 Lift the scanner unit.
2 Remove any obstruction keeping the scanner unit open.
3 Lower the scanner unit.

These are possible solutions. Try one or more of the following:
If an error message is displayed, see “Error messages” on page 94.
Check the ink levels, and install a new print cartridge if necessary.
If the scanner glass is dirty, gently wipe it with a clean, lint-free cloth dampened with water.
See “Improving print quality” on page 72.
1 Load the document facedown on the scanner glass.
2 From the control panel, press Copy Mode.
3 Press Lighter/Darker.
4 Press or repeatedly to lighten or darken the copy.
5 Press Start Color or Start Black.
If the quality of the original document is not satisfactory, try using a clearer version of the document or image.
Are you scanning from photo or glossy paper, a magazine, or a newspaper?
If you are copying or scanning from photo or glossy paper, a magazine, or a newspaper, see “Removing wavy patterns from scanned photos, magazines, or newspapers” on page 66.
Make sure the document or photo is loaded facedown on the scanner glass in the upper left corner.

These are possible solutions. Try one or more of the following:
Make sure the document or photo is loaded facedown on the scanner glass in the upper left corner.
Make sure the paper size being used matches the size you selected.
Make sure that the Original Size setting is Automatic or the size of the original document that you are copying.
These are possible solutions. Try one or more of the following:
If an error message is displayed, see “Error messages” on page 94.
If the light is not on, see “Power button is not lit” on page 78.
Control Panel Printers (under Hardware and Sound). • In Windows Vista (Classic Start menu):
Settings Printers.
2 Double-click the print queue device.
For more information, see “Removing and reinstalling the software” on page 100.

These are possible solutions. Try one or more of the following:
1 Check the USB cable for any obvious damage.
2 Firmly plug the square end of the USB cable into the back of the printer.
3 Firmly plug the rectangular end of the USB cable into the USB port of the computer.
The USB port is marked with the USB symbol.
Turn off and then restart your computer.
For more information, see “Removing and reinstalling the software” on page 100.
These are possible solutions. Try one or more of the following:
Close all programs not being used.
1 Load an original document facedown on the scanner glass.
2 From the desktop, double-click the Lexmark Imaging Studio icon.
3 From the left pane of the Welcome screen, click Scan.
4 Click Custom Settings.
5 Select a lower scan resolution.
6 Click Start.
These are possible solutions. Try one or more of the following:
If an error message is displayed, see “Error messages” on page 94.
If the scanner glass is dirty, gently wipe it with a clean, lint-free cloth dampened with water.
1 Load an original document facedown on the scanner glass.
2 From the desktop, double-click the Lexmark Imaging Studio icon.
3 From the left pane of the Welcome screen, click Scan.

4 Click Custom Settings.
5 Select a higher scan resolution.
6 Click Start.
See “Improving print quality” on page 72.
Are you scanning from photo or glossy paper, a magazine, or a newspaper?
If you are copying or scanning from photo or glossy paper, a magazine, or a newspaper, see “Removing wavy patterns from scanned photos, magazines, or newspapers” on page 66.
If the quality of the original document is not satisfactory, try using a clearer version of the document or image.
Make sure the document or photo is loaded facedown on the scanner glass in the upper left corner.
These are possible solutions. Try one or more of the following:
Make sure the document or photo is loaded facedown on the scanner glass in the upper left corner.
Make sure the paper size being used matches the size you selected.
Make sure the Original Size setting is Auto Detect or the size of the original document you are scanning.
See “Scanning to a computer over a network” on page 63.
1 Press to turn off the printer.
2 Firmly grasp the paper, and gently pull it out.

3 Press to turn the printer back on.
1 Press to turn off the printer.
2 Firmly grasp the paper, and gently pull it out.
3 Press to turn the printer back on.
These are possible solutions if paper or specialty media misfeeds or skews, or if multiple sheets feed or stick together. Try one or more of the following:
Use only new, unwrinkled paper.
See “Loading various paper types” on page 34 for information about:
Remove each page as it exits, and let it dry completely before stacking.
Adjust the paper guides:
These are possible solutions. Try one or more of the following:
Check for and clear any paper jams. For more information, see “Paper jam in the printer” on page 90 and “Paper jam in the paper support” on page 91.

Control Panel Printers (under Hardware and Sound). • In Windows Vista (Classic Start menu):
Settings Printers.
2 Double-click the print queue device.
There are possible solutions. Try one or more of the following:
1 Press to turn off the printer.
2 Remove the jammed banner paper from the printer.

There are possible solutions. Try one or more of the following:
Make sure that the type of memory card you are using can be used in the printer. For more information, see “Inserting a memory card” on page 44.
Make sure you have inserted the memory card in the correct slot. For more information, see “Inserting a memory card” on page 44.
These are possible solutions. Try one or more of the following:
The memory card may have been inserted too slowly. Remove and then reinsert the memory card quickly.
Make sure you have inserted the memory card in the correct slot. For more information, see “Inserting a memory card” on page 44.
Make sure that the type of memory card you are using can be used in the printer. For more information, see “Inserting a memory card” on page 44.
Check that there is no obvious damage to the memory card.
Insert a memory card that contains photos. The printer will read photos created using the JPEG format. For more information, see the documentation that came with the digital camera.
1 Check the USB cable for any obvious damage.
2 Firmly plug the square end of the USB cable into the back of the printer.
3 Firmly plug the rectangular end of the USB cable into the USB port of the computer.
The USB port is marked with the USB symbol.

These are possible solutions. Try one or more of the following:
1 Remove the print cartridge.
2 Make sure the sticker and tape have been removed.
3 Reinsert the cartridge.
4 Press to align the cartridge.
For more information, see “Aligning print cartridges” on page 72.
Load only plain, unmarked paper for aligning the cartridge.
The printer will read any markings on used paper, which could cause the alignment error message to appear.
1 Check the indicated ink level or levels, and install a new print cartridge or cartridges if necessary.
To order supplies, see “Ordering supplies” on page 74.
2 Press to continue.
1 Remove the print cartridges, and close the cartridge carrier lids.
2 Disconnect the power cord from the electrical outlet.
3 Reconnect the power cord to the electrical outlet.
4 If the button is not lit, press .
5 Reinsert the print cartridges.
If the error does not reappear, the problem has been corrected.
If the problem reappears, one of the cartridges is not working properly. Continue with the following procedure to determine which cartridge is not working properly.
1 Remove the print cartridges, and close the cartridge carrier lids.
2 Disconnect the power cord from the electrical outlet.
3 Reconnect the power cord to the electrical outlet.
4 If the button is not lit, press .

5 Reinsert the black (or photo) print cartridge.
7 If the error reappears, replace the color print cartridge with a new one.
These are possible solutions. Try one or more of the following:
1 Raise the scanner unit.
2 Remove any objects blocking the path of the print cartridge carrier.
3 Make sure the cartridge carrier lids are closed.

4 Close the scanner unit.
5 Press .
1 Make sure the printer is on.
2 Raise the scanner unit.
3 Remove both print cartridges.
4 Make sure the cartridge carrier lids are closed.
5 Close the scanner unit.
6 Press to turn the printer off.
7 Disconnect the power cord from the wall outlet.
8 Plug the power cord back into the wall outlet.
9 Press to turn the printer on.

10 Reinstall the print cartridges. For more information, see “Installing print cartridges” on page 70

11 Close the scanner unit.
12 Plug the power cord into the wall outlet.
13 Press to turn the printer on.
14 Reinstall the print cartridges. For more information, see “Installing print cartridges” on page 70.
These are possible solutions. Try one or more of the following:
Make sure your computer is connected to the printer and is turned on.
1 Check the USB cable for any obvious damage.
2 Firmly plug the square end of the USB cable into the USB port on the back of the printer.
3 Firmly plug the rectangular end of the USB cable into the USB port of the computer.
The USB port is marked with the USB symbol.
If you are using an external print server, make sure it is connected. For more information, see the print server documentation.
The document placed on the scanner glass is not a valid proof sheet. For more information, see “Printing photos stored on a memory device using the proof sheet” on page 49.
1 Remove the print cartridges.
2 Reinstall the black cartridge or the photo cartridge in the left carrier.
3 Reinstall the color cartridge in the right carrier.

This message may also appear as Error 1205 (Left Cartridge) or Error 1206 (Right Cartridge).
1 Remove the indicated print cartridge.
2 Disconnect the power cord from the electrical outlet.
3 Reconnect the power cord to the electrical outlet.
4 If the button is not lit, press .
5 Reinsert the print cartridge.
1 Remove the indicated print cartridge.
2 Disconnect the power cord from the electrical outlet.
3 Reconnect the power cord to the electrical outlet.
4 If the button is not lit, press .
5 Reinsert the print cartridge.
One or both print cartridges are missing or not installed properly. For more information, see “Installing print cartridges” on page 70.
These are possible solutions. Try one or more of the following:
If applicable:

1 From the desktop, double-click the Lexmark Imaging Studio icon.
2 From the left pane of the Welcome screen, click Setup and manage faxes.
3 Click Adjust speed dial list and other fax settings.
4 Click the Dialing and Sending tab.
5 From the “Sending options” area, select After Dial from the “When to scan document” section.
6 Click OK.
7 Resend the fax.
You have not selected any of the options on step 1 of the photo proof sheet you printed and scanned.
1 Make sure you completely fill in your selected circle or circles.
2 Press to continue.
You have not selected any of the options on step 2 of the photo proof sheet you printed and scanned.
1 Make sure you completely fill in your selected circle or circles.
2 Press to continue.
The photo proof sheet you printed and scanned is no longer valid.
You may have removed the memory card or flash drive from the printer, or turned off the printer, before scanning the photo proof sheet.
For more information, see “Printing photos stored on a memory device using the proof sheet” on page 49.
No supported images have been found on the memory card or flash drive.
The printer will read photos created using the JPEG format. For more information, see the documentation that came with the digital camera.
You have selected more than one option on step 2 of the photo proof sheet you printed and scanned.
1 Make sure you completely fill in only one circle for each option.
2 Press to continue.
You have selected more than one option on step 2 of the photo proof sheet you printed and scanned.
1 Make sure you completely fill in only one circle for each option.
2 Press to continue.

Photo size error. Photo must fit on page.
There are one or more photos larger than the paper size you selected on the printer menu.
1 Press to clear the error message.
2 Press or repeatedly until Paper Size appears on the display.
3 Press .
4 Press or repeatedly to select the paper size option that will fit your largest photo size.
5 Press Start Color or Start Black to begin printing.
Remove and then reinsert the USB cable that came with the camera into the PictBridge port on the front of the printer. For more information, see “Using a PictBridge-enabled digital camera to control printing photos” on page 52.
Please remove the camera card.
The printer can read either a PictBridge-enabled digital camera or a memory card, but not both at the same time.
1 Remove both the PictBridge-enabled digital camera and the memory card.
2 Reinsert only one of the devices mentioned above.
Some photos removed from card by host.
Some of the photos on the photo proof sheet were deleted from the memory card through the computer.
You must print a new photo proof sheet.
For more information, see “Printing photos stored on a memory device using the proof sheet” on page 49.
There is a problem reading the memory card.
These are possible solutions. Try one or more of the following: Change time-out settings
If you press to select a setting, an * appears next to the selected setting. The printer reverts to the default setting after two minutes of inactivity or if the printer is turned off. For information on how to change this time-out feature, see “Saving settings” on page 25.
If you press to select a setting, an * appears next to the selected setting. For information on how to save the setting for future jobs, see “Saving settings” on page 25.
You can reset your printer to the original settings without using the printer menus.

1 Press to turn off the printer.
2 Press and hold the Settings and Start Color buttons at the same time, then press again to turn the printer back on.
Language appears on the display, indicating that the printer has been reset.
3 Press or until the language you want appears.
4 Press .
5 Press or until the country or region you want appears.
6 Press .
If the printer is not functioning properly, or if a communications error message appears when you try to use the printer, you may need to remove and reinstall the printer software.
1 Click Start Programs or All Programs Lexmark 3500-4500 Series.
2 Select Uninstall.
3 Follow the instructions on the computer screen to remove the printer software.
4 Restart the computer before reinstalling the printer software.
5 Click Cancel on all New Hardware Found screens.
6 Insert the CD, and then follow the instructions on the computer screen to reinstall the software.
If the software still does not install correctly, visit our Web site at www.lexmark.com to check for the latest software.
1 In all countries or regions except the United States, select your country or region.
2 Click the links for drivers or downloads.
3 Select your printer family.
4 Select your printer model.
5 Select your operating system.
6 Select the file you want to download, and then follow the directions on the computer screen.

Product name:
Machine type:
Model(s):
Product name:
Machine type:
Model number 2:
Edition notice
The following paragraph does not apply to any country where such provisions are inconsistent with local law: LEXMARK INTERNATIONAL, INC., PROVIDES THIS PUBLICATION “AS IS” WITHOUT WARRANTY OF ANY KIND, EITHER EXPRESS OR IMPLIED, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY OR FITNESS FOR A PARTICULAR PURPOSE. Some states do not allow disclaimer of express or implied warranties in certain transactions; therefore, this statement may not apply to you.
This publication could include technical inaccuracies or typographical errors. Changes are periodically made to the information herein; these changes will be incorporated in later editions. Improvements or changes in the products or the programs described may be made at any time.
References in this publication to products, programs, or services do not imply that the manufacturer intends to make these available in all countries in which it operates. Any reference to a product, program, or service is not intended to state or imply that only that product, program, or service may be used. Any functionally equivalent product, program, or service that does not infringe any existing intellectual property right may be used instead. Evaluation and verification of operation in conjunction with other products, programs, or services, except those expressly designated by the manufacturer, are the user’s responsibility.
For Lexmark technical support, visit support.lexmark.com.
For information on supplies and downloads, visit www.lexmark.com.
If you don't have access to the Internet, you can contact Lexmark by mail:
Lexmark International, Inc. Bldg 004-2/CSC 740 New Circle Road NW Lexington, KY 40550
© 2007 Lexmark International, Inc.
All rights reserved.
This software and any accompanying documentation provided under this agreement are commercial computer software and documentation developed exclusively at private expense.
Lexmark and Lexmark with diamond design are trademarks of Lexmark International, Inc., registered in the United States and/or other countries.

PerfectFinish is a trademark of Lexmark International, Inc.
All other trademarks are the property of their respective owners.
The following notices are applicable if your printer has a wireless network card installed
The following measurements were made in accordance with ISO 7779 and reported in conformance with ISO 9296. Note: Some modes may not apply to your product.
1-meter average sound pressure, dBA
Values are subject to change. See www.lexmark.com for current values.
The WEEE logo signifies specific recycling programs and procedures for electronic products in countries of the European Union. We encourage the recycling of our products. If you have further questions about recycling options, visit the Lexmark Web site at www.lexmark.com for your local sales office phone number.

Power consumption
The following table documents the power consumption characteristics of the product. Note: Some modes may not apply to your product.
Mode Description Power consumption (Watts)
Printing The product is generating hard-copy output from electronic inputs.
Copying The product is generating hard-copy output from hard-copy original documents.
Scanning The product is scanning hard-copy documents. Lexmark 3500 Series: 10; Lexmark 4500 Series: 13
Ready The product is waiting for a print job. Lexmark 3500 Series: 8; Lexmark 4500 Series: 11
Power Saver The product is in energy-saving mode. Lexmark 3500 Series: 5.0; Lexmark 4500 Series: 7.7
High Off The product is plugged into a wall outlet, but the power switch is turned off.
Low Off (
Off The product is plugged into a wall outlet, but the power switch is turned off.
The power consumption levels listed in the previous table represent time-averaged measurements. Instantaneous power draws may be substantially higher than the average.
Values are subject to change. See www.lexmark.com for current values.
This product is designed with an energy-saving mode called Power Saver. The Power Saver Mode is equivalent to the EPA Sleep Mode. The Power Saver Mode saves energy by lowering power consumption during extended periods of inactivity. The Power Saver Mode is automatically engaged after this product is not used for a specified period of time, called the Power Saver Timeout.
Factory default Power Saver Timeout for this product (in minutes): 60
If this product has an off mode which still consumes a small amount of power, then to completely stop product power consumption, disconnect the power supply cord from the wall outlet.
It is sometimes helpful to calculate the total product energy usage. Since power consumption claims are provided in power units of Watts, the power consumption should be multiplied by the time the product spends in each mode in order to calculate energy usage. The total product energy usage is the sum of each mode's energy usage.
not applicable · not applicable

Opening this package, installing the printing device software, or using the print cartridges inside, confirms your acceptance of the following license/agreement: The patented print cartridges contained inside are licensed for a single use only and is/are designed to stop working after delivering a fixed amount of ink. A variable amount of ink will remain in the cartridge when replacement is required. After this single use, the license to use the print cartridge terminates, and the used cartridge must be returned only to Lexmark for remanufacturing, refilling or recycling. If you do not accept the terms of this single use license/agreement, return this product in its original packaging to your point of purchase. A replacement cartridge sold without these terms is available at www.lexmark.com.
* Products within the XX80 Series (including but not limited to Models X1380, X1480, X1580, X2580, X3580, and X4580) are not subject to this license agreement.




Pages referenced in this manual — manufacturer, support and downloads.
Owners and our team usually reply within a day — and your question helps the next person too.
Be the first to ask — other owners or our team will answer.