
User manual
Type(s) of equipment:
Models:
036, 037, 096, 336, 337, 388, 396, 836






Conventions
Various precautions:
Precautionary Statement 7

CAUTION – POSSIBLE RISK OF INJURY The power cord shall not be cut, distorted, pinched or squeezed. In addition, no heavy objects may be placed on it. Do not expose the cable to wear or other stress. Do not clamp the power cord between objects such as B. furniture or walls. If one of these hazards is present, there is a danger of fire and electric shock. Check the power cord regularly for these dangers. Unplug the power plug from the socket before checking the power cord.
CAUTION – ELECTRIC SHOCK HAZARD: If you want to access the control board after setting up the printer or install optional hardware or storage media, first turn off the printers and unplug the power cord from the outlet to avoid the risk of an electric shock. If there are other devices connected to the printer, turn them off as well and unplug all cables on the printers.
Precautionary Statements 8

This device and its associated components have been designed and tested for use in compliance with global safety requirements. The safety-relevant functions of the components and options are not always obvious. If parts are used that do not originate from the manufacturer, he assumes no responsibility or liability for this product.
Have all maintenance and repair work not described in the user documentation done exclusively by a customer service representative.
This product uses a printing process in which the print media are heated. This warming can lead to emissions from the printing media. It is therefore important that you in the
Precautionary Statements 9

Instructions for use shall read carefully the section on selection of suitable printing media and follow the guidelines listed therein in order to prevent hazardous emissions.
This product may produce small amounts of ozone in normal operation and can be equipped with a filter that reduces the concentration of ozoan to well below recommended exposure limits. To avoid high ozone concentrations during intensive use, you should place this product in a well-ventilated environment and replace the ozonate and exhaust filters according to product maintenance instructions. If the product maintenance instructions do not contain any information about filters, this product does not have filters that need to be replaced.
KEEP THESE INSTRUCTIONS.
Precautionary Statements 10

Information about the printer 11
Determining Printer Information

Information about the printer 12

When selecting a printer location, make sure there is enough space to open paper trays, covers and flaps as well as install hardware options.

Information about the printer 13
Ambient temperature 10 to 32.2° C.
Storage temperature -40 to 43.3° C.

1 Top 152 mm (6 inches)
2 Right side 152 mm (6 inches)
3 Front 406 mm (16 inches)
4 Left side 152 mm (6 inches)
5 Rear 152 mm (6 inches)

Information about the printer 14
You can configure your printer with additional optional 250, 550 or 2100 sheet compartments. For more information, see "Insert Print Media in 250-Sheet or 550-Sleaf compartment" on page 258 or "Install the 2100-Slate compartment" at page 259.

1 Automatic Document Feeding (ADZ) – Subject

Information about the printer 15

3 Optional 250- or 550 sheet tray
When using optional compartments:
1 Optional 2100-sheet compartment · 2 Rolling stock

Information about the printer 16

1 Power cord socket Connect the printer to a properly grounded power outlet.
2 USB printer port Connect the printer to a computer.
3 Ethernet port to connect the printer to a network
4 USB port Connect a keyboard or compatible option.
5 LINE port Connect the printer to an active telephone line via a standard phone jack (RJ-11), DSL filter or VoIP adaptor, or other adapter that allows you to access the telephone line for sending and receiving fax messages.

Menu Entry Description

Information about the printer 17
2 Home button Return to the home screen.
3 Power switches • Turn the printer on or off.
4 Keyboard Enter numbers or symbols into an input field.
5 Insert a dial-up pause into a fax number.
6 Start button Launch a job depending on the selected mode.
7 "Delete/Reset everything" button
Reset the default settings of a function, such as copying, faxing or scanning.
8 Stop or cancel the current job.
9 Re-key Move the cursor back and delete a character in an input field.
10 Check the printer status.
11 Volume buttons Adjust the volume for the headset or speaker.
Connection of a headset or speaker.

The printer is switched off or in sleep mode.
Blue The printer is ready or processing data.
Red The printer is waiting for an action from the user.
The printer is out, ready or processes data.
Menu Entry Description · 12 Headset or speaker port

Setting up and using the start screen applications 18
Using the Start Screen

1 Make copies of them.
2 Email Sending emails.
3 Settings Access to the printer menus.
4 Send faxes.
5 Manage a contact list that other applications on the printer can access.
8 Order queue View all current print jobs.
9 Stop jobs display print jobs in the printer's memory.
10 Short-choice center Organize all short elections.
Symbol description

Setting up and using the Start Screen Applications 19
11 App Profiles Access to Application Profiles
12 Scanprofiles scan and save documents directly on the computer.
13 FTP Scan and save documents directly on an FTP server.
14 Bookmarks Organize all bookmarks.
15 Change language change the language on display.
1 Open a web browser and enter the printer’s IP address in the address field.
2 Click on it Settlements > Equipment > Symbols on Start Screen.
3 Select the icons that you want to display on the Home screen.
4 Apply the changes.
1 Open a web browser and enter the printer’s IP address in the address field.
2 Click on it Apps > Copying of the card > Configuration.
3 Apply the changes.
Symbol description

Setting up and using the Start Screen Applications 20
1 In the Home screen, press the option Short-dial centre, and then select a printer function.
2 Press the option Creating a linkThen configure the settings.
3 Press the option Storage, and then enter a unique name for the link.
4 Apply the changes.
Before using the application, perform the following steps:
1 In the appropriate section for screensavers and slideshow, you can add, edit or delete images.
2 Apply the changes.
1 Touch on the home screen Change background image.
2 Select an image to use.
3 Apply the changes.
1 Connect a flash drive to the USB port.
2 Touch on the home screen Slideshow.
The images are now listed in alphabetical order.
1 Press on the home screen Scanning.
2 Select and create a destination directory, then configure the settings.

Setting up and using the start screen applications 21
3 Apply the changes.
We recommend that you log in to the printer before creating a profile. For more information about how to activate the login, see Embedded Web Server - Security Admin Guide.
1 Touch on the home screen Cloud Connector.
2 Select a cloud service provider.
3 Touch them Creating a profile or .
4 Enter a unique profile name.
5 If applicable, please provide: a PIN.
6 Touch them Create, and then write down the authorization code.
7 Open a web browser and enter the following: http://lexmark.cloud-connect.co.
8 Click on it Further, and agree to the Terms of Use.
9 Enter the authorization code, and then click on Connecting.
10 Sign in for your account with your cloud service provider.
To access the application, you may need administrator rights.
1 Open a web browser and enter the printer’s IP address in the address field.
2 Click on it Apps > Equipment quotas > Configuration.
11 Granting of permissions

Setting up and using the start screen applications 22
3 In the section "User Accounts" add a user or Edit existing users and then set user quotas.
4 Apply the changes.
To access the application, you may need administrator rights.
1 Open a web browser and enter the printer’s IP address in the address field.
2 Click on it Apps > QR code generator > Configuration.
4 Apply the changes.
1 Touch on the home screen Savings settings.
2 Configure the Eco-Mode settings or set an energy saving mode.
3 Apply the changes.
1 Tap on the home screen Customer support.
2 Print information or send it by email.

Setting up and using the start screen applications 23
Use bookmarks to print commonly used documents stored on servers or the Internet.
1 Open a web browser and enter the printer’s IP address in the address field.
2 Click on it Bookmarking device > Add bookmarks, and enter a unique name for the bookmark.
To restrict access to the bookmark, enter a PIN.
4 Click on it Storage.
1 Open a web browser and enter the printer’s IP address in the address field.

Setting up and using the start screen applications 24
2 Click on it Bookmarking device > Adding folders Then, enter a unique name for the folder.
3 Click on it Storage.
1 Open a web browser and enter the printer’s IP address in the address field.
2 Click on it Address book.
3 Select from the "Contacts" section, Add contact.
4 If applicable, provide a method for logging in and allow the application to access it.
5 Apply the changes.
1 Open a web browser and enter the printer’s IP address in the address field.
2 Click on it Address book.

Setting up and using the Start Screen Applications 25
3 Select the "Contact Groups" section and add a group name.
4 Apply the changes.
1 Open a web browser and enter the printer’s IP address in the address field.
2 Click on it Address book.
4 Apply the changes.
1 Open a web browser and enter the printer’s IP address in the address field.
2 Click on it Address book.

Setting up and using the accessibility functions 26
Voice control is activated
1 Hold the button 5 Press until a voice message is heard.
2 Select OK.
1 Hold the button 5 Press until a voice message is heard.
2 Press Tabto navigate the image focus cursor to the OK button, and then press Enter.
Double-Tap an option or select an item on the screen.
Triple type enlarge or shrink text and images.
Swipe right or down to the next element on screen.
Swipe left or up to switch to the previous item on screen.
Pan access to parts of the zoomed image that the screen otherwise does not display.
Swipe up and then left to quit an application and return back to home screen.
Swipe down and then left
Gesture function

Setting up and using the accessibility functions 27
Move up and then down
Repeat a spoken command.
1 Hold the button on the control panel 5 Press until a voice message is heard.
2 Choose the Magnification mode Off.
3 Select OK.
For more information about navigation on an enlarged screen, see "Navigating the screen with gestures" on page 26.
1 On the Home screen, press on the option Settlements > Equipment > Access > Speaking speed.
2 Select the speaking speed.
Perform one or more of the following methods:
1 On the Home screen, press on the option Settlements > Equipment > Access > Passwords/PINs.
2 Activate the setting.
Gesture function

Insertion of paper and special printing media 28
Determine the format and same type of specialty print media
The compartments automatically recognize the format of normal paper. For specialty printing media such as labels, cards or envelopes, proceed as follows:
1 Switch to the home screen:
Settlements > Paper > Subject configuration > Paper size/variety > Select a paper feeder
2 Set the format and type of specialty print media.
1 Touch the option on the home screen Settlements > Paper > Media configuration > Configuration Universal.
2 Configure the settings.
1 Pull the tray out.

2 Adjust the guides so that they match the format of the inserted paper.

Insertion of paper and special printing media 29

3 Before inserting, bend the paper in both directions, fan it up and level out the edges.

4 Place the stack of paper with its side to be printed on upwards, and subsequently make sure that the lateral guides are in close contact with the paper.


Insertion of paper and special printing media 30

Single-sided pressure Two-side pressure


Single-sided pressure Two-side pressure




Insertion of paper and special printing media 31
5 Push the tray into the printer.
6 Set the paper size and type of paper on the control panel according to the inserted paper.
1 Pull the tray out.
2 Adjust the guides.
a Raise the width guide and slide it into position for A5 format.


Insertion of paper and special printing media 32
b Press the length guide together, and slide into position for A5 format until it
audibly engaged.

c Take the A5 length guide out of the bracket.

d Place the guide in the intended receptacle and press it until it latches.


Insertion of paper and special printing media 33
a Raise the width guide and slide it into the correct position for what is to be inserted
paper format.

b If the A5 length guide is still attached, remove it. If the A5 track is not
Continue with step d on page 34.

c Insert the A5 length guide into its holder.


Insertion of paper and special printing media 34
d Press the length guide together, and slide the guide into the correct position for
the paper format to be inserted.

3 Before inserting, bend the paper in both directions, fan it up and level out the edges.
4 Place the stack of paper with the page to be printed down. • Do one of the following when you insert sheets:
Single-sided pressure Two-side pressure



Insertion of paper and special printing media 35
Single-sided pressure Two-side pressure


5 Push the tray into the printer.

6 Set paper size and grade on the printer control panel according to the inserted paper.
1 Open the universal feeder.


Insertion of paper and special printing media 36
2 Adjust the guide so that it matches the format of the inserted paper.

3 Before inserting, bend the paper in both directions, fan it up and level out the edges.
4 Place paper with the print side up. • Do one of the following when you insert sheets:
Single-sided pressure Two-side pressure


Single-sided pressure Two-side pressure


5 Set the paper size and type of paper on the control panel according to the inserted paper.

Insertion of paper and special printing media 37
1 Open a web browser and enter the printer’s IP address in the address field.
2 Click on it Settlements > Paper > Subject configuration
3 For the compartments you connect, set the same paper fomat and type of paper.
4 Save the settings.
5 Click on it Settlements > Equipment > Maintenance > Configuration menu > Subject configuration.
6 Set up the function for connecting compartments Cargo.
7 Save the settings.
To release the tray connection, make sure that no trays have the same settings for paper size or type of paper.

Supported paper formats

A5 SEF 148 x 210 mm (5.8 x 8.3 inches) X X
Oficio (Mexico) 216 x 340 mm (8,5 x 13,4 Zoll)
Letters 216 x 279 mm (8.5 x 11 inches)
Folio 216 x 330 mm (8.5 x 13 inches)
Universal 105 x 148 mm (4.1 x 5.8 inches) to 216 x 356 mm (8.5 x 14 inches).
1 Long edge (LEF) A5 formats are recommended, none short edge (SEF).
2 envelopes with a width above 101.6 mm (4.5 inches) may be able to wrinkle. This type of paper must be tested for acceptability.
Paper support 38


98.4 x 162 mm (3.9 x 6.4 inches) to 176 x 250 mm (6.9 × 9.8 inches).
1 Long edge (LEF) A5 formats are recommended, none short edge (SEF).
2 envelopes with a width above 101.6 mm (4.5 inches) may be able to wrinkle. This type of paper must be tested for acceptability.

1 Print a maximum of 20 pages to prevent foils from sticking together. Print the following pages after three minutes.
Paper support 39


1 Print a maximum of 20 pages to prevent foils from sticking together. Print the following pages after three minutes.

1 For paper weighing more than 176 g/m2 (47 lb), the horizontal fibre direction is recommended.
2 Pressure sensitive area must first be pulled into the printer
3 For envelopes weighing 105 g/m2, the cotton content is limited to 25 %.
Paper support 40

Paper grade and weight Standard 550 sheet tray, optional 250-
140–175 g/m² X
75–135 g/m² X
60–105 g/m² X
1 For paper weighing more than 176 g/m2 (47 lb), the horizontal fibre direction is recommended.
2 Pressure sensitive area must first be pulled into the printer
3 For envelopes weighing 105 g/m2, the cotton content is limited to 25 %.

Printing from a computer
1 In the document you want to print, open the Print dialog box.
2 Adjust the settings as needed.
3 Print the document.
With Mobile Print, you can send documents and images directly to a supported Lexmark device.
1 First open the document, and then send it to Lexmark Mobile Print or share it with Lex mark Mobile Print.
2 Select a printer.
3 Print the document.
Google Cloud PrintTM is a print service that allows you to print on any Google Cloud print-enabled printer.
At the beginning, make sure you are:
1 On your mobile device, open a document or select a document from the File Manager.
2 Tap them
> Printing.
3 Select the bookmark, and tap on it.
The Mopria® Printing Service is a mobile printing solution for mobile devices running AndroidTM version 4.4 or higher. This allows you to print directly on any Mopria certified printer.
Printing 42

1 Launch a compatible application from the home screen of your mobile device.
2 Tap them PrintingAnd select the printer.
3 Send the print job.
AirPrint is a mobile printing solution that allows you to print directly from Apple devices on an airprint certified printer.
1 Launch a compatible application from the home screen of your mobile device.
2 Select the item to print, and then tap on the share icon.
3 Tap them PrintingAnd select the printer.
4 Send the print job.
1 Install the flash drive.

2 On the display, touch the document you want to print.
If necessary, configure the pressure settings.
Printing 43

3 Send the print job.
To print another document, touch USB drive.

– The printer supports high-speed USB flash drives with full speed standard. – USB flash drives must support the FAT file system (File Allocation Tables).
Documents:
Printing 44

1 Navigate to the control panel:
Settlements > Security > Settings for confidential printing.
2 Configure the settings.
Max. Invalid PINs Limit the number of invalid PINE inputs.
Expiry date for confidential contracts
Set the expiration period for confidential printing.
Set the expiration period for a repeat print job.
Expiry date for contracts to be reviewed
Set the expiration period so that the printer will print a copy before printing any remaining copies.
Expiry date for reserved printing
Set the time limit for storing print jobs in the printer.
Requirement to hold all orders
Set the printer to stop all printing jobs.
Set the printer to print all documents with the same filename.
1 Click on an open document File > Printing.
2 Click on it Characteristics, Preset settings, Options or Establishment.
3 Click on it Printing and retention.
4 Select Printing and retention Then, assign a username.

5 Select the print job type (confidential, repeated, reserved or confirmed).
If the print job is confidential, enter a four-digit PIN.
6 Click on it OK or Printing.
1 Select when the document is open File > Printing Off.
If necessary, click the triangle to display more options.
2 Select the option in the dialog box with print options or in the "Copies & Pages" menu Order routing.
3 Select the print job type (confidential, repeated, reserved or confirmed).
If the print job is confidential, assign a username and four-digit PIN.
4 Click on it OK or Printing.
1 Touch on the home screen Cloud Connector.
2 Select a cloud service provider, and then select a profile.
3 Select a file.
4 Change if necessary. the settings.
5 Tap them Printing.
Printing 46

1 Touch the option on the home screen Settlements > Reports > Printing > Printing typefaces.
2 Press PCL fonts or PostScript fonts.
Touch the option on the home screen Settlements > Reports > Printing > Printing directory.
Printing 47

Use of the automatic document feeder (ADZ) and scanner glass
Automatic document feeder (ADZ) scanner glass


1 Place an original document in the ADZ compartment or on the scanner glass.
2 Tap the option on the Home screen Copy, and then enter the number of copies.
Please adjust if necessary. the copy settings.
3 Copy the document.
1 Place a photo on the scanner glass.
2 Switch to the home screen:
Copying > Content > Content type > Photo
3 In the "Source of Content" menu, select a setting that best matches the original photo.
4 Copy the photo.
Copy 48

1 Place an original document in the ADZ compartment or on the scanner glass.
2 Tap the option on the Home screen Copying, and specify the format of the original document.
3 Press Copying on, and then select the compartment with specialty print media.
When inserting the special printing media into the universal feeder, switch to:
Universal feeder > Select the format of specialty print media > Letters
4 Send the copy job.
1 Place an original document in the ADZ compartment or on the scanner glass.
2 Tap the option on the Home screen Copying > Paper settings.
3 Adjust the settings.
4 Copy the document.
1 Place an original document in the ADZ compartment or on the scanner glass.
2 Switch to the home screen:
Copying > Scaling > Enter the desired value
3 Copy the document.
1 Place an original document in the ADZ compartment or on the scanner glass.
2 Tap the option on the Home screen CopyingThen set up "Sort" One.
3 Copy the document.
1 Place an original document in the ADZ compartment or on the scanner glass.
2 Tap the option on the Home screen Copying > Separation sides.
3 Adjust the settings.
4 Send the copy job.
Copying 49

1 Place an original document in the ADZ compartment or on the scanner glass.
2 Press on the home screen Copying > Pages per page.
3 Adjust the settings.
4 Copy the document.
1 Open a web browser and enter the printer’s IP address in the address field.
2 Click on it Short dialling numbers > Add a short dial number.
3 Select from the menu "Short number type" Copy Then, set the settings.
4 Apply the changes.
Copy 50

Use of the automatic document feeder (ADZ) and scanner glass
Automatic document feeder (ADZ) scanner glass
1 Open a web browser and enter the printer’s IP address in the address field.
2 Click on it Settlements > E-mail > E-mail establishment.
3 Configure the settings.
4 Apply the changes.
1 Open a web browser and enter the printer’s IP address in the address field.
Emails 51

2 Click on it Settlements > E-mail.
3 Enter the required information.
4 Apply the changes.
1 Place an original document in the ADZ compartment or on the scanner glass.
2 Tap the option on the Home screen E-mail, and then enter the necessary information.
3 If necessary, configure the settings for the output file type.
4 Send the email.
1 Press on the printer control panel #, and then enter the shortcode number via the keyboard.
2 Send the email.
1 Open a web browser and enter the printer’s IP address in the address field.
2 Click on it Short dialling numbers > Add a short dial number.
3 Select from the menu "Short number type" E-mail Then, set the settings.
4 Apply the changes.
Email 52

Use of the automatic document feeder (ADZ) and scanner glass
Automatic document feeder (ADZ) scanner glass

Faxes 53

1 Touch the option on the home screen Settlements > Equipment > Preset settings > Run start setup.
2 Turn the printer off, wait about 10 seconds and turn it back on.
3 In the screen "Before you start" select the option Change settings and continue with the assistant.
4 In the "Set up fax/email server" screen, enter the required information.
5 Complete the device.
Faxes 54


1 Connect one end of the phone cable to the printer's line port.
2 Connect the other end of the cable to an active analog telephone socket.
Faxes 55


1 Connect one end of the phone cable to the printer's line port.
2 Connect the other end of the cable to an active analog telephone socket.
Faxes 56

By default, the RJ11 telephone jack is used in most countries or regions. If the phone jacks or devices in your telephone system are not compatible with this type of connection, use a phone adapter. An adapter for your country or region may not be included with printers and must be purchased separately.
An adapter plug may be connected to the printer's telephone connection. Do not remove the adapter plug from the printer’s phone port if you are using a cascaded or serial telephone system.
Faxes 57 · Parts Description Parts Lexmark adapter plug 40X8519


1 Connect one end of the phone cable to the printer's line port.
2 Connect the other end of the cable to the RJ11 adapter, and connect the adaptor to the phone jack.
3 If you connect another device with an RJ11 port to the same phone jack, connect it directly to the telephone adapter.
Faxes 58

German telephone jacks have two types of connections. N-connections are suitable for fax machines, modems and answering machines. The F-connector is designed for telephones. Connect the printer to any N port.

1 Connect one end of the phone cable to the printer's line port.
2 Connect the other end of the cable to the RJ11 adapter and connect the adaptor to the N port.
3 If you want to connect a phone and answering machine to the same telephone jack, plug in devices as shown.
With different call signals, you can assign multiple phone numbers to a telephone line. Each telephone number is assigned a different call sign pattern.
1 In the Home screen, press the option Settlements > Fax > Analogue faxing equipment > Fax reception settings > Admin control > Response activated.
2 Select the call sign pattern.
3 Apply the changes.
Faxes 59

1 Touch the option on the home screen Settlements > Equipment > Preset settings > Time and date > Configuration.
2 Configure the settings.
1 Touch the option on the home screen Settlements > Equipment > Preset settings > Date and time > Configuration.
2 Select "Time Zone" in the menu User-defined Off.
3 Configure the settings.
1 Place the original document in the automatic document feeder (ADZ) or on the scanner glass.
2 Tap the option on the Home screen Fax, and then enter the necessary information.
3 If necessary, configure further fax settings.
4 Send the fax order.
1 Click on an open document File > Printing.
2 Select the printer, and click on it. Characteristics, Preset settings, Options or Establishment.
3 Click on it Fax > Fax activation, and enter the recipient's number.
4 If necessary, configure further fax settings.
5 Send the fax order.
1 Select when the document is open File > Printing Off.
2 Select the printer and enter the recipient's number.
3 If necessary, configure further fax settings.
4 Send the fax order.
Faxes 60

1 Place the original document in the automatic document feeder (ADZ) or on the scanner glass.
2 Switch to the home screen:
Fax > Enter fax number > Broadcasting time
3 Configure the date and time to send out the fax.
4 If necessary, configure further fax settings.
5 Send the fax order.
1 Open a web browser and enter the printer’s IP address in the address field.
2 Click on it Short orders > Add a short command.
3 Select from the "Short Command Type" menu Fax Then, set the settings.
4 Apply the changes.
1 Place an original document in the ADZ compartment or on the scanner glass.
2 Tap the option on the Home screen Fax, and then enter the necessary information.
3 Adjust the "resolution" setting.
4 Send the fax order.
1 Place an original document in the ADZ compartment or on the scanner glass.
2 Tap the option on the Home screen Fax, and then enter the necessary information.
3 Adjust the "Toner order" setting.
4 Send the fax order.
Faxes 61

1 Open a web browser and enter the printer’s IP address in the address field.
2 Click on it Settlements > Reports > Fax.
3 Click on it Fax order protocol or Fax call protocol.
1 In the Home screen, press the option Settlements > Fax > Analogue faxing equipment > Fax reception settings > Admin control > Block Fax without a Name.
2 Apply the changes.
1 In the Home screen, press the option Settlements > Fax > Analogue fax configuration > Fax reception settings > Retaining faxes.
2 Select a mode.
1 In the Home screen, press the option Settlements > Fax > Analog fax configuration > Fax reception settings > Admin control.
2 Configure the shortcuts for "Fax Forwarding", "Forward to" and "forward to Short-Dial Settings".
3 Apply the changes.
Faxes 62

Use of the automatic document feeder (ADZ) and scanner glass
Automatic document feeder (ADZ) scanner glass
1 Place the original document in the automatic document feeder (ADZ) or on the scanner glass.
2 Tap the option on the Home screen FTP, and then enter the necessary information.
3 If necessary, configure additional FTP settings.
4 Send the FTP order.
1 Open a web browser and enter the printer’s IP address in the address field.
2 Click on it Short orders > Add a short command.
Scan 63

3 Select from the "Short Command Type" menu FTP Then, set the settings.
4 Apply the changes.
1 Place an original document in the ADZ compartment or on the scanner glass.
2 Install the flash drive.
3 Touch them Scan to USB And adjust the settings if necessary.
4 Scan the document.
Scan 64

1 Place an original document in the ADZ compartment or on the scanner glass.
2 Tap on the home screen Scan Center, and then select from the list of goals Fax Off.
3 Select a fax destination.
4 Scan the document.
1 Place an original document in the ADZ compartment or on the scanner glass.
2 On the Home screen, press the option Scanning profiles > Scanning on computer.
3 Select the scan profile for which you want to save the document.
1 Place the document in the roof of the automatic document feeder (ADZ) or on the scanner glass.
2 Touch on the home screen Cloud Connector.
3 Select a cloud service provider, and then select a profile.
4 Select if necessary. a folder.
5 Tap them Scanning.
Scan 65

6 Change if necessary. the scanning settings.
7 Tap them Scanning.
Scan 66

Menu allocation
Printer menus 67 · Copying standard · FTP default values

Specifies in which language the text is displayed on the display.
Identify the country or region in which in which the printer has been configured for operation.
[List of countries or regions]
Executing the configuration assistant.
Select a language as the keyboard type.
Select the information to display on the Home screen.
Text 1 [IP address*] Text 2 Indicated [date/time*] Custom text 1 User-defined text 2
Configure printer date and time.
Act. Date/Time Manually set date format [MM-DDYYY*] Time format [12 hours AM/PM*] time zone [GMT*]

Configure the settings for Network Time Protocol (NTP).
Network Time Protocol (NTP)
NTP actively activate [A*] NTP server authentication.
Specifies the unit of measurement for paper formats.
U.S.* Metric
20-100% (100*) Adjust the display brightness.
Access to the flash drive
Allow access to the flash drive.
Determines whether background removal is allowed.
Allow custom scans
Scans multiple orders into one file.
Sets that only one side of the scanner glass is copied at a time.
Enable audio feedback for keystrokes, control panel interactions, paper insert prompts and error notifications.
Adjust the volume for the printer's speakers.
10-300 (60*) Set the inactive time of the printer within seconds, which must pass before the display shows the home screen or the printers automatically log out from a user account.

Connect an external Virtual Network Computing (VNC) client to the remote control panel.
Set the authentication type when accessing the VNC client server.
Set the tell-tale to light up when a printer error occurs.
Sound when inserting paper into the ADZ
Activate a sound for the infeed of paper into ADZ.
Specify how often the warning signal will sound when the printer requires user intervention.
Displays the estimated status of consumables.
Show estimates*Do not show estimation
Determine the unit used by the printer to estimate consumable needs and have custom notification triggered when user intervention is required.
Specify how often the warning signal will sound when toner standing in the toner cassette is low.
Configure the notification settings if user intervention is required.
Custom material notifications.

E-mail alarm device Configure the printer to send an email warning to a list of contacts if it requires user intervention.
Set the printer to automatically output blank pages or partially printed pages once a jammed page has been removed.
Have the printer continue to process or print printing jobs automatically after certain attention conditions have been fixed.
Set the printer to restart when an error occurs.
Start again when inactive Always restart* Never restart
Set the number of automatic restarts that the printer can perform.
Set the number of seconds that must pass before the printer performs an automatic restart.
Window for automatic restarts
Display the read-only status of the restart counter.
Automatic restart counters
Reset the values for the automatic restart counter.
Autom. Restart counter back.
Set the printer to display a message if there is an error "Paper is too short".
Display error "Paper too short"
Set the printer to slide the entire page into memory before printing it.

Set the printer to reprint jammed pages.
Specify how a scan job will restart after fixing a paper jam.
Continue after traffic jam - scanner
Allow printing with the advertisement turned off.
Print with the display off
Allow display to be switched on when printing (Allow for print with the display off)*
Sets the idle time before the printer switches to energy-efficient mode.
1-120 Min. (15*)
Sets the time period before the printer goes to sleep.
Deactivated 1 hour 2 hours 3 hours 6 hours 1 day 2 days 3 days* 1 week 2 weeks 1 month
Specifies that the printer will go to sleep even if there is an active Ethernet connection.
Connection sleep time lock
Sleep mode Not to change to sleep*
Minimizes the consumption of energy, paper or specialty printing media.
From * Energy energy / paper paper

Plan to activate the energy-saving or sleep mode for the printer.
Info sent to Lexmark
Send printer consumption and printer performance information to Lexmark.
Consumption and page use (anonymous) Device performance (an anonymously) None of the o. a. Information
Anonymous session – only for info* Session information with generic user information
0-5 (0*) Set the time interval in seconds where the device ignores duplicate key input on a connected keyboard.
0.25-5 (1*) Set the original delay time in seconds before a repeat button starts to replay.
0.5-30 (30*) Adjust the number of touches per second for a repeat button.
Allow the user to stay in the same place and reset the display time lock when it expires instead of returning to the home screen.
1-10 (5*) Adjust the headphone volume.

Activate the voice control with headphones connected
Activate voice control when headphones are connected to the printer.
Set the printer to read passwords or personal identification numbers out loud.
Adjust the speech speed for voice control.
Very Slowly Normal* Fast Something faster Quickly Fastest Fastest
Restore the printer's factory specifications.
Restore all settings printeronce. Reset networking inst. Reset App Once. Reset
Configuration menu
Change the USB driver mode of your printer to improve its compatibility with a PC.
Specify whether the USB device driver is specified as a simple USB (simple interface) or a combination USB (multi-interface) device.

Set the USB port to work with full speed and disable its Hi-Speed function.
Set up the printer to connect compartments with the same paper grade and size settings.
Leave the message Specialist insert Display.
From Only for Unknown Paper Sizes* Always
Provide the A5 format paper feeder page orientation.
Short edge* Long edge
Set the paper feeder that the user fills when he or she inserts paper, i.e. Envelopes are requested.
Automatic* universal feed paper manually
Automatic* universal feed envelope manually
Set up the printer to provide prompts related to paper or The cover is to be changed.
Ask users to continue using current
Print reports the printer's menu settings, status and event logs.
Reset the Consumable Print Page Counter or have it display the total number of printed pages.
The course of the consumable extinguishes cartridge. Black back. Counter Exposure Unit Black Reset Maintenance counter
Set up the printer to detect and use PPDS data stream.

Set the fax chip to switch into energy-saving mode as soon as the printer specifies.
Fax at the bottom. Power management mode
Deactivate Power-Saving Mode Allow for Automatic*
Set a maximum value for the point size of text under which high-frequency screens are used when printing font data. For example, if you set the value 24, all point sized fonts or less will use high-frequency screens.
0 bis 150 (24*)
Adjust the toner density when printing or copying documents.
1-5 (3*) Density for copies
Set the printer to work in "Silent Mode".
Allow access to the menus of the control panel.
Set up the printer for operation in a special mode where it continues to try and offer as many functions as possible despite known problems. For example, if “on” is set and the duplex motor is not operational, the printer will perform one-sided printing even when two-sides of a print has been applied.
Assign space for copy jobs.
20 MB* 30 MB 50 MB 80 MB 100 MB
Delete custom strings for standardized or alternative user-defined messages.
Deletes messages that have been installed remotely from the printer.
Delete all remotely installed messages

Display existing error messages on the display after the printer is inactive on the home screen for a time equivalent to that of the "Display Time Lock" setting.
Set up the printer so that it can use the "Alignment" setting in the Copy menu when sending out fast copy jobs.
Consider orientation in fast path copying
Register flatbed and automatic document feeder (ADZ) manually after the ADZ, scanner glass or control board has been replaced.
Registration front ADZ registration rear ADZ flatbed registration
Set the size in millimeters of the non-printing area around a scan job with ADZ or flat bed.
ADZ – Delete the edge
0-6 (3*) Flat bed – delete edge
Deactivate the scanner if it is not working properly.
Activated* Deactivated ADZ deactivates
Print a test page that shows the settings for the scanner edge.
Determine the byte sequence of a TIFF-formatted scan output.
Determine the RowsPerStrip tag value for a TIFF-formatted scan output.
Exact Tiff Rows by Strip

View information at the time of last cleanup of printer memory or hard drive.
Last cleaned memory Last cleansed hard disk
Delete all settings and applications that are stored in the printer memory or on disk.
Clean all information in permanent memory All disk information cleanse All printer and networking entity. Delete
Status/Material Order queue language change address bookmark stopped orders USB app profiles Adjustment Saving settings
Set which icons should be displayed on the Start screen.
Inventory label Displays the printer serial number.
Location of the printer Identifies the printer location. The maximum length is 63 characters.
Contact them. Personalize the printer name. The maximum length is 63 characters.
Export configuration file in USB Exports configuration files to a flash drive.
Compr. Logdat. to USB export. Exports compressed log files to a flash drive.

Indicate whether the paper is to be printed on one or both sides.
Determines which side of the paper (long edge or short edge) is bound when printed on both sides.
Long edge* Short edge
Print blank pages into a print job.
Maintain the order of pages in a print job, especially when printing multiple copies of a print task.
Aus [1,1,1,2,2,2]* Ein [1,2,1,2,1,2]
When printing, insert several empty separators.
No * Between Copies between Orders Between Pages
Determines from which paper feed the separating side is supplied.
Manufacture from materials of any heading
Print multipage images on a sheet of paper.
From* 2 sheets per page 3 leaves per side 4 sheetsper page 6 sheetsPer page 9 sheets Per page 12 sheets/page 16 sheets
Pages per page (arrangement)
When multipage printing, set the position of page images if you use "Pages per Page".
Horizontal* Reverse horizontally vertically

Pages per page (orientation)
When multipage printing, set the orientation of documents when you use "Pages per page".
Pages per page (edge)
Print a frame around each page image when using "Pages per Page".
1-9999 (1*) Specify the number of copies for each print job.
Set the printable area on a sheet of paper.
Normal* Adjust to side Full page
Set the printer language.
Withhold print jobs that use certain consumables so that orders that don’t use the missing cons of materials can be printed.
Detain time lock for order
Specify how many seconds the printer waits for user intervention before orders are stopped due to unavailable resources and then other orders from the print queue are printed.
Determine how the color image unit should work during printing.
Max. Speed max. Capacity*
Specify where all permanent resources (e.g., B. fonts and macros that have been downloaded to the printer.

Set how the printer should handle loaded resources (e.g., B. fonts and macros) when a print job is received for which the available memory is not sufficient.
Sets the order in which confidential and paused print jobs are printed if the "Print Total Order" option has been selected.
Alphabetical * Last First Elder first
Set the resolution for text and images on print output.
300 dpi 600 dpi* 1200 dpi 1200 image quality 2400
For a clearer print image, allow more pixels to be printed in groups for better text and images quality.
From * Writings Horizontal Vertical Both directions Isolated
1 to 10 (8*) Determine the brightness or Darkness of text images.
Improves the print output with softer lines with sharper edge.
Adjusts the brightness of the print output.
–6 bis 6 (0*)
0 to 5 (0*) Adjusts the contrast of the print output.

Setting the contrast adjustment for images.
Set the printer to create a log of received printing jobs.
Set how often the printer should create a log file.
Log action at the end of interval
Specify how the printer should react when the interval threshold is exceeded.
Do not * Send current protocol by email Send and delete current protocol on website Set up and deleted current protocol
Specifies the maximum size of the log file before the scanner performs the protocol action "almost full".
Set how the printer should react when your hard drive is almost full.
Do not * Send current protocol by email Send and delete Current protocol by e-mail Send & delete Oldest protocol by Email Send And delete Updated protocol on website Set Up Current log On site and deletion Place oldest protocol on web page Delete Elder protocol on site Put Down and delase Current protocol Delete All except current protocol Deleted all protocols

Specify how the printer should react when disk utilization reaches its maximum value (100 MB).
Do not * Send and delete current protocol by email Send & delete Current protocol by e-mail Put Up Current log on website and Delete Oldest protocol on site Setup and deletion Postal Protocol On Website Delete Current log Delete Elder protocol Delete All except current protocol Delase all protocol Delist
URL to the protocol Specify where the printer should place order billing logs.
Email address for sending protocols Specifies the email address to which the printer sends order billing logs.
Protocol file prefix Specify the desired prefix for the log file name.
Print a test page that contains information about the errors as well as XML labeling errors.
1-30 (2*) Set the minimum stroke width for all orders printed in 1200 dpi.
Scales the page content to the selected paper format.
Specify whether annotations should be printed in the PDF file.

Print a page with the definition of PostScript error.
Deactivate the PostScript SysStart file.
Improve contrast and sharpness of low resolution images.
Set the printer to wait for more data before cancelling an order.
Deactivated 15 to 65,535 (40*)
Select the source that contains the default font selection.
Resident* Flash Data Carrier All
Select a font from the specified font source.
[List of available fonts] (Courier*)
Determine the character set for each typeface name.
[List of available symbol set] (10U PC-8*)
0,08-100 (10*) Specify the division of fixed or uniform fonts.
Set the orientation of text and graphics on the page.

1-255 Set the number of lines of text for each page printed through PCL® data stream.
1-30 (2*) Set the original minimum line width.
Set the width of the logical page for A4 format.
198 mm* 203 mm
Auto WR to ZV
Set the printer to automatically perform a cart return after a line feed control command.
Auto ZV to WR
Set the printer to automatically perform a line feed after a control command for the cart return.
Configure the printer to work with another print driver or custom application that uses other feed and paper tray assignments.
Uni.Infeed assignment Subject [x] Assignment Manual Paper assignments Manual envelope allocation
The following options are available to you:
0-199—Choose a numeric value to assign a customized value to a paper feeder. 200—The printer uses the factory settings for paper feed assignments. 201—The paper feeder ignores the command “Select Paper Feeder”.
Display the factory default values for each paper feeder.
Reset the specialist reversal values to factory specifications.
Set the printer to finish a printing job after it has been idle for the specified time (in seconds).

Set the font for HTML documents.
[List of Fonts] (Times*)
1–400% (100*) Scale HTML documents.
Sets the page orientation for HTML documents.
8-255 mm (19*) Sets the page edge for HTML documents.
Print background information or graphics for HTML documents.
Autom. Adapted
Select the best available paper format and desired orientation for an image.
Inverts black and white images.
Adjust the image optimally to the print area.
Best Adjustment* Anchoring top left Center anchor height/Adapt width adjust height adjust width
Set the orientation of text and graphics on the page.
Portrait* Reverse portrait/Reverse portaint

Set the paper feeder for all print jobs.
Box [x] (1*) Universal paper feed manual envelope manual
Specify the paper size or type of paper that will be inserted into the relevant source.
Box [x] Universal paper feed manual envelope manual
Set the printer to replace one specified paper format with another if the requested paper size is not inserted in any of the paper feeders.
Specify when the printer should pull in the paper inserted into the universal feed.
Universal equipment
Enter the unit of measurement for the paper format "Universal".

Adjusting the portrait width of the paper format "Universal".
3-52 Zoll (8,50*) 76-1321 mm (216*)
Adjusting the portrait height of the paper format "Universal".
3-52 Zoll (14*) 76-1321 mm (356*)
Set the printer to pull in paper over either the short edge or long edge.
Short edge* Long edge
Assign a name to the scan size and configure the scanning settings.
1-8,50 Zoll (8,50*) 25-216 mm (216*) Höhe
1-14 inch (14*) 25-356 mm (297*) alignment
Portrait format* landscape 2 scans per page Off* On

Normal card foil recycled paper labels Vinyl label fine postal paper envelope Letter envelope rough letter sheet Pre-printed colour paper Light Paper Heavy Paper Rough/Cotton User variety [x]
Indicate the structure, weight and orientation of the inserted paper.
Improve the output result based on the contents of the original document.
Text/Photo* Photo Graphics
Improve the output result from the source of the original document.
Black-and-white laser* color laser inkjet photo/film magazine newspaper Press Other
Set the scanning behavior based on the original document.
One-sided – one-side* single-side - two-sides double-side – one side both sides

Set whether to insert empty separators.
No * Between Copies between Orders Between Pages
Determines from which paper feed the separating side is supplied.
Manufacture from materials of any heading
Specify the number of images to be printed on a page of one sheet of paper.
From* 2 pages in portrait format 4 pages in harbour format 2 pages on landscape format 4 sides
When printing multiple pages on a sheet, place a frame around each individual image.
Print multiple copies in a row.
Aus [1,1,1,2,2,2] Ein [1,2,1,2,1,2]*
Copying of size [List of paper formats]
Set the paper format of the original document.
Enter the paper feed for the copy job.
Subject [x] (1*) Universal feeder Autoformat Conformity
Adjust the coverage of the scanned image.
‑4 bis 4 (0*)
1-9999 (1*) Setting the number of copies.
Applying a header or footer to the print output.
Upper left Mid-centre Up right Lower left

Specifies the overlapping text that is printed on each page of the copy job.
Confidential Copy Draft Urgently User Defined Out*
Custom template Enter a custom overlapping text.
Specify which color is suppressed when scanning, and adjust the setting for that color.
No red green blue
Indicates the contrast of the output document.
Adjusts the visible background on a scanned image.
Direct the content automatically to the middle of the page.
Creates a mirror image of the original document.

Creates a negative image of the original document.
Adjusts the visible shadow details on a scanned image.
‑4 bis 4 (0*)
Scan edge to edge
Allows scanning the original document from edge to edge.
1-5 (3*) Adjust the sharpness of the scanned image.
Insert a separating side between the films.
Interrupt a print job to copy a page or document.
By default, enable custom scanning.
Allow storage as a short dial
Saves custom copy settings as shortcuts.
Example copy Prints an example copy.
Select a fax mode.

General fax settings
Fax name Identify your Fax Device.
Fax number Identify your Fax Number.
Notify fax recipients of your fax name or number.
Sets the printer to manual fax mode.
Assign a certain amount of internal printer memory to the fax function.
All on Received Mostly on Reception Equal Parts* Much on Send Everything
Cancel outgoing faxes before they are sent, or cancel incoming faxs before the printing process is complete.
Let the phone number of the fax sender be displayed.
Set the format for encrypting an outgoing fax number.
From the left to the right
0-58 (0*) Specifies the number of digits to be encrypted in an outgoing fax.

Activate detection for connected line
Determine if a phone line is connected to the printer.
Activate detection for line in the wrong junction box
Determine if a phone line is connected to the correct port for the printer.
Activate support for the extension used
Determine if a phone line is being used by another device, such as B. from another phone over the same line.
Optimising fax compatibility Configure the printer fax function for optimum compatibility with other fax machines.
Set the resolution of the scanned image.
Fine Super Fine Ultra Fine
Specify the size of the original document.
Enter the page orientation of the original document.
Enter the page alignment of text and graphics when scanning a side-by-side document.
From* Long edge Short edge

Improve the output result based on the contents of the original document.
Text* Text/Photo Photo Graphics
Improve the output result from the source of the original document.
Black and white laser* color laser inkjet photo/film magazine newspaper Press Other
Adjust the coverage of the scanned image.
‑4 bis 4 (0*)
Set up the printer to dial the fax number without waiting for the dial.
Specify the dial mode for incoming or outgoing faxes.
Adjust the amount of toner used for each color.
‑4 bis 4 (0*)
Specify which color is suppressed when scanning, and adjust the setting for that color.
No red green blue

Specify the contrast of output.
Adjusts the visible background on a scanned image.
‑4 bis 4 (0*)
Creates a mirror image of the original document.
Creates a negative image of the original document.
Adjusts the visible shadow details on a scanned image.
‑4 bis 4 (0*)
Scan edge to edge
Allows scanning the original document from edge to edge.
1 to 5 (3*) Adjust the contrast of the scanned image.
Set whether the output generated should go more into blue or more into red.
‑4 bis 4 (0*)
1-200 min. (3*) Increase the time between election repetition attempts and thus also the chance for successful fax shipping.
Activate error correction mode for fax jobs.

Fax files that have been scanned on the printer.
Allow the printer driver to send fax jobs.
Allow storage as a short dial
Stores fax numbers as short commands in the printer.
Max. Speed
Set the maximum speed for fax shipping.
33600* 14400 9600 4800 2400
By default, enable custom scanning.
Have a preview of the scan displayed on the screen.
Activate color scanning for faxing.
Default Deactivated*Default Activated Never Use Always Use
Colour faxes autom. Convert to S/W fax
Converts all outgoing colored faxes to black and white.
Confirm the fax number
Ask the user to confirm the fax number.
Pre-selection Enter a prefix.
Sets a pre-choice rule.

Waiting fax order on transfer
Removes fax jobs that require certain unavailable resources from the printer queue.
No* toners and consumables
1-25 (3*) Set the number of call signs for incoming faxes.
Adjust the size of incoming faxes to the side.
Specify the paper feeder for printing incoming faxes.
compartment [x] Universal feed Automatic*
Printing paper on both sides.
Set whether to insert empty separators.
No * Before the order After the order
Determines from which paper feed the separating side is supplied.
Manufacture from materials of any heading
Enter the output tray for received faxes.
Prints the transmission information of an incoming fax at the end of each page.
Print the timestamp at the end of each page of an incoming fax.
Holds received faxes back until they are released for printing.
Always a manual schedule

Configure the printer for receiving faxes.
Have the number from which incoming fax is sent appear.
Lock incoming faxes from devices without specifying the Station ID or Fax ID.
Enter the phone numbers you want to block.
Set a unique ring tune for incoming fax messages.
All roaring tones* Single ring sound only Double ring sound Only Triple ring sound Just single or double ring sounds Only Single or triple ring sound
Autom. Response
Configure the printer for automatic fax reception.
0-9 (9*) Manually enter a code via the phone keyboard to accept faxes.
Specify how to forward received faxes.
Print* print and forward forward
Specify where received faxes should be forwarded.
Confirmation e-mail Send a confirmation email if the fax forwarding was successful.

Max. Speed
Set the maximum speed for fax transmission.
33600* 14400 9600 4800 2400
Configure the settings for the fax cover sheet.
Default Deactivated*Default Activated Never Use Always Use
Message:

Print a protocol for successful fax transfers or Transmission error.
Print protocol* Don't print log Only if you have an error
Print a log for errors when receiving faxes.
Never print* When errors are made
Print all fax activities.
Specify the paper feeder used for printing protocols.
Manufacture from materials of any heading
Identify the sender by remote fax name or fax number.
Show a summary of all fax jobs.
Show a summary of the fax dial-up history.
Specify the filing for printed logs.
Set the mode for fax speaker.
Always from always one to connected*
Adjust the volume of your fax speaker.
Activate the ringing volume.

General fax settings
'On' format Enter a fax receiver.
Reply to Enter a response address to send faxes.
Subject Enter fax subject and message.
Configure the printer for receiving analog faxes.
Primary SMTP gateway Enter the IP address or hostname of the primary Simple Mail Transfer Protocol (SMTP) server for email delivery.
1-65535 (25*) Enter the connection number of the primary SMTP server.
Secondary SMTP gateway Enter the server IP address or hostname of your secondary or backup SMTP server.
1-65535 (25*) Enter the connection number of your secondary or backup SMTP server.
5-30 (30*) Set the time before the printer's time limit expires if the SMTP server does not respond.
Reply to Enter a response address to send faxes.
Enter an SMTP response address to send faxes.
Specify whether the fax should be sent via an encrypted link.
Enter a trusted certificate when accessing the SMTP servers.

Set the authentication type for SMTP server.
No authentication required* Registration/Normal NTLM CRAM‐MD5 Digest–MD5 Kerberos 5
Device-initiated email
Specify whether device-initiated emails require authentication information.
No * SMTP data (device) used.
User-initiated email
Set whether authentication information is required for user initiated email.
No * SMTP data (device) used. Use user ID and password. Email address and password use requesting users
Notification The Active Directory.
Enable user login information and group destinations to connect with the SMTP server.
Device ID Enter the user ID and password for connecting to SMTP server. Device password
Kerberos 5 REALM Enter the range for Kerberos 5 authentication protocol.
NTLM domain Enter the domain name for the NTLM security protocol.
Error "SMTP Server not set up" deactivate
Hide the error message "SMTP server not set up".
Enter the output format for the scanned image.
TIFF (.tif) PDF (.pdf)* XPS (.xps) TXT (. txt) RTF (.rtf) DOCX (.docx)

Improve the output result based on the contents of the original document.
Text/Photo* Photo Graphics
Improve the output result from the source of the original document.
Black and White Laser Color Laser* Inkjet Photo/Film Magazine Newspaper Press Other
Reduce the fax resolution.
Fine Super Fine Ultra Fine
Set the orientation of text and graphics on the page.
Set the paper format of the original document.
Select between single- and multipage TIFF files.
Primary SMTP gateway Enter the primary SMTP gateway or hostname of the primary smtp server for email delivery.

1-65535 (25*) Enter the connection number of the primary SMTP server.
Secondary SMTP gateway Enter the server IP address or hostname of your secondary or backup SMTP server.
1-65535 (25*) Enter the connection number of your secondary or backup SMTP server.
5-30 seconds (30*) Set the time before the printer's time limit expires if the SMTP server does not respond.
Reply to In the e-mail, provide a reply address.
Always use the default response address in the "SMTP server" field.
Specify whether the email should be sent via an encrypted link.
Request a trusted certificate when accessing the SMTP server.
Set the authentication type for SMTP server.
No authentication required* Registration/Normal NTLM CRAM‐MD5 Digest–MD5 Kerberos 5
Device-initiated email
Specify whether device-initiated emails require authentication information.
No * SMTP data (device) used.
User-initiated email
Set whether authentication information is required for user initiated email.
No * SMTP data (device) used. Use user ID and password. Email address and password use requesting users
Notification The Active Directory.
Enable user login information and group names to connect with the SMTP server.
Device ID Enter the user ID and password for connecting to SMTP server. Device password

Kerberos 5 REALM Enter the range for Kerberos 5 authentication protocol.
NTLM domain Enter the domain name for the NTLM security protocol.
Error "SMTP Server not set up" deactivate
Hide the error message "SMTP server not set up".
Subject Enter the email subject and message.
File name Enter the file name for the scanned image.
Enter the output format for the scanned image.
PDF (.pdf)* TIFF (.tif) JPEG (.jpg) XPS (.xps) TXT (. txt) RTF (.rtf) DOC (.docx)
Global OCR setting.
Configure the settings for OCR (optical character recognition)
Despotting Recognized Languages Automatic Turning Automatic Contrast Improvement

Set the PDF format of the scanned image.
1.3 1.4 1.5* 1.6 1.7 Archive. Version
A-1a*A-1b Highly Compressed
From * An Archival (PDF/A)
Improve the output result based on the contents of the original document.
Text/Photo* Photo Graphics
Improve the output result from the original document.
Black and white laser* color laser inkjet photo/film magazine newspaper Press Other
Set the color when scanning an image.
Black and white grey color* car

Set the resolution of the scanned image.
75 dpi 150 dpi* 200 dpi 300 dpi 400 dpi 600 dpi
Adjust the coverage of the scanned image.
-4 bis 4 (0*)
Set the orientation of text and graphics on the page.
Set the paper format of the original document.
Enter the page alignment of text and graphics when scanning a side-by-side document.
From* Long edge Short edge
Adjust the amount of toner consumed for each individual color.
-4 bis 4 (0*)
Specify which color is suppressed when scanning, and adjust the setting for that color.
No* Red Green Blue Standard threshold red
0-255 (128*) Standard Green threshold
0-255 (128*) Default threshold blue
Set the amount of color that the printer recognizes on the original document.

Set the quality of a scanned image in JPEG format.
Optimal setting for content* 5 – 95
Indicates the contrast of the output document.
Optimal setting for content* 0 1 2 3 4 5
Adjusts the visible background on a scanned image.
‑4 bis 4 (0*)
Creates a mirror image of the original document.
Creates a negative image of the original document.
Adjusts the visible shadow details on a scanned image.
‑4 bis 4 (0*)
Scan edge to edge
Allows scanning the original document from edge to edge.
1-5 (3*) Adjust the sharpness of the scanned image.
Set whether the output generated should go more into blue or more into red.
‑4 bis 4 (0*)
Determine whether empty pages should be included.
Removing Blank Pages Sensitivity to Blanks

Max. Email size
0-65535 (0*) Set the maximum allowed file size for each email.
Size error message Set an error message that the printer sends when an email exceeds the allowed file size.
Restrict addresses Limit email delivery to the specified list of domain names.
Send a copy of the email to yourself.
Never displayed* By default enabled Default disabled Always on
Limit the number of email recipients.
Cc:/Bcc/use
Enable Carbon Copy (cc) and Blindcopy (bc) for email.
Choose between single- and multipage TIFF files.
Set a compression option for TIFF files.
5-95 (75*) Set the quality of text on a scanned image.
5-95 (75*) Set the quality of text or photos on a scanned image.
5-95 (50*) Set the quality of photos on a scanned image.
Enable Text/Photo mode to create smaller file sizes by using 1-bit images.
1 bit 8 bits*
Print a protocol for successful email transmission.
Print protocol* Don't print log Only if you have an error

Specify the paper feeder used for printing protocols.
Manufacture from materials of any heading
By default, enable custom scanning.
Have a preview of the scanned image appear on display.
Allow storage as a short dial
Saves email addresses as shortcodes.
Sending e-mails "Sent as"
Specify how images are sent in emails.
Reset email information after sending
Recover the standard email information after you send an email.
Setting up. Web link.
Servers Set the printer as a web link for sending emails.

Enter the output format for the scanned image.
PDF (.pdf)* TIFF (.tif) JPEG (.jpg) XPS (.xps) TXT (. txt) RTF (.rtf) DOCX (.docx)
Global OCR setting.
Configure the settings for OCR (optical character recognition)
Despotting Recognized Languages Automatic Turning Automatic Contrast Improvement
Set the PDF format for the scanned image.
1.3 1.4 1.5* 1.6 1.7 Archive. Version
A-1a*A-1b Secure
From * An Archival (PDF/A)
Improve the output result based on the contents of the original document.
Text/Photo* Graphics Photo

Improve the output result from the source of the original document.
Black and White Laser Color Laser* Inkjet Photo/Film Magazine Newspaper Press Other
Set the color when scanning an image.
Black and white grey color* car
Set the resolution of the scanned image.
75 dpi 150 dpi* 200 dpi 300 dpi 400 dpi 600 dpi
Adjust the coverage of the scanned image.
-4 bis 4 (0*)
Set the orientation of text and graphics on the page.
Set the paper format of the original document.
Enter the page alignment of text and graphics when scanning a side-by-side document.
From* Long edge Short edge
File name Enter the file name of the scanned image.
Adjust the amount of toner used for each color during scanning.
-4 bis 4 (0*)

Specify which color is suppressed when scanning, and adjust the setting for that color.
No* Red Green Blue Standard threshold red
0-255 (128*) Standard Green threshold
0-255 (128*) Default threshold blue
Set the amount of color that the printer recognizes on the original document.
Set the quality of an image in JPEG format.
Optimal setting for content* 5 – 95
Indicates the contrast of the output document.
Optimal setting for content* 0 1 2 3 4 5
Adjusts the visible background on a scanned image.
‑4 bis 4 (0*)
Creates a mirror image of the original document.
Creates a negative image of the original document.

Adjusts the visible shadow details on a scanned image.
‑4 bis 4 (0*)
Scan edge to edge
Allows scanning the original document from edge to edge.
1-5 (3*) Adjust the sharpness of the scanned image.
Set whether the output generated should go more into blue or more into red.
‑4 bis 4 (0*)
Determine whether empty pages should be included.
Removing Blank Pages Sensitivity to Blanks
5-95 (75*) Set the quality of text on a scanned image.
5-95 (75*) Set the quality of a text or photo on a scanned image.
5-95 (50*) Set the quality of a photo on a scanned image.
Choose between single- and multipage TIFF files.
Set a compression option for TIFF files.
Print a protocol for successful FTP scan transmission.
Print protocol* Don't print log Only if you have an error
Specify the paper feeder used for printing FTP protocols.
Manufacture from materials of any heading
Enable Text/Photo mode to reduce file size by using 1-bit images.
1 bit 8 bits*

By default, enable custom scanning.
Have a preview of the scan displayed on the screen.
Allow storage as a short dial
Saves custom FTP settings as shortcuts.
Enter the output format for the scanned image.
PDF (.pdf)* TIFF (.tif) JPEG (.jpg) XPS (.xps)
Global OCR setting.
Configure the settings for OCR (optical character recognition).
Despotting Recognized Languages Automatic Turning Automatic Contrast Improvement
Set the PDF format for the scanned image.
1.3 1.4 1.5* 1.6 1.7 Archive. Version
A-1a*A-1b Secure
From * An Archival (PDF/A)

Improve the output result based on the contents of the original document.
Text/Photo* Graphics Photo
Improve the output result from the source of the original document.
Black and White Laser Color Laser* Inkjet Photo/Film Magazine Newspaper Press Other
Set the color when scanning an image.
Black and white grey color* car
Set the resolution of the scanned image.
75 dpi 150 dpi* 200 dpi 300 dpi 400 dpi 600 dpi
1-9 (5*) Adjust the coverage of the scanned image.
Set the orientation of text and graphics on the page.
Set the paper format of the original document.
Enter the page alignment of text and graphics when scanning a side-by-side document.
From* Long edge Short edge
File name Enter the file name of the scanned image.

Colour balance Adjust the amount of toner used for each color.
Specify which color is suppressed when scanning, and adjust the setting for that color.
No* Red Green Blue Standard threshold red
0-255 (128*) Standard Green threshold
0-255 (128*) Default threshold blue
Set the amount of color that the printer recognizes on the original document.
Set the quality of an image in JPEG format.
Optimal setting for content* 5 – 95
Indicates the contrast of the output document.
Optimal setting for content* 0 1 2 3 4 5
Adjusts the visible background on a scanned image.
‑4 bis 4 (0*)
Creates a mirror image of the original document.

Creates a negative image of the original document.
Adjusts the visible shadow details on a scanned image.
‑4 bis 4 (0*)
Scan edge to edge
Allows scanning the original document from edge to edge.
1-5 (3*) Adjust the sharpness of the scanned image.
Set whether the output generated should go more into blue or more into red.
‑4 bis 4 (0*)
Determine whether empty pages should be included.
Removing Blank Pages Sensitivity to Blanks
5-95 (75*) Set the quality of text on a scanned image.
5-95 (75*) Set the quality of text or photos on a scanned image.
5-95 (75*) Set the quality of photos on a scanned image.
Choose between single- and multipage TIFF files.
Set compression for TIFF files.
Enable Text/Photo mode to reduce file size by using 1-bit images.
1 bit 8 bits*
By default, enable custom scanning.
Have a preview of the scan displayed on the screen.

1-9999 (1*) Specify the copy number.
Enter the paper feed for the print job.
Box [x] (1*) Universal paper feed manual envelope manual
Print multiple copies in a row.
Indicate whether the paper is to be printed on one or both sides.
Determines which side of the paper (long edge or short edge) is bound when printed on both sides.
Long edge* Short edge
Print multipage images on a sheet of paper.
From* [n] pages per page
Pages per page (arrangement)
When multipage printing, set the position of page images if you use "Pages per Page".
Horizontal* Reverse horizontally Inverted vertically
Pages per page (orientation)
When multipage printing, set the orientation of documents when you use "Pages per page".
Pages per page (edge)
Print a frame around each page image when using "Pages per Page".
Set whether to insert empty separators.
From* Between Copies between Orders Between Pages
Determines from which paper feed the separating side is supplied.
Manufacture from materials of any heading

Specify whether blank pages should be printed into a print job.
Indication of the type of network connection.
Network status Displaying the connection status of the printer network.
Displaying the network status on the printer
Display the network status on display.
Speed, duplex Display the speed of the currently active network card.
IPv4 Displaying the IPv4 address.
All IPv6 addresses View all IPv6 addresses.
Resetting the Print Server Reset all active network connections on the printer.
Set the time period before the printer cancels a network printing job.
From On (90 seconds)
Printing a cover page.
Connection area for scanning to PC
9751:12000* Specify a valid connection area for printers protected by firewalls that block ports.

Installation with mobile app Configure the Wi-Fi connection with Lexmark Mobile Assistant.
Configure the Wi-Fi connection via the control panel.
Select network Add Wi-Fi network
Deactivated* WEP WPA2/WPA - Personal WPA2 - Personnel 802.1x - RADIUS
Wid‑Fi Protected Setup
Set up a Wi-Fi network and enable Network Security.
Start the keystroke method PIN-Method
Set the network mode.
Activate Wi-Fi Direct compatible devices to connect them directly with the printer.
Specify the default setting for the Wi-Fi network.
802.11b/g/n (2.4 GHz)* 80211a/b/ g/n/ac (2.4 GHz/5 GHz)
Select Security Mode to connect the printer with Wi-Fi devices.
Deactivated* WEP WPA2/WPA personnel WPA2-Person 802.1x - RADIUS
Set the Wireless Encryption Protocol (WEP) type of printer.
Determine WFP keys Set a WEP password for a secure Wi-Fi connection.

Enable Wi-Fi security using the Wi-FI Protected Access (WPA).
Setting pre-shared keys Set the password for a secure Wi-Fi connection.
Activate Wi-Fi security using WPA2.
802.1x encryption mode WPA+ WPA2*
Enable Wi-Fi security with the default 802.1x option.
Activate the Dynamic Host Configuration Protocol (DHCP) and configure the static IP address.
Setting up a* from Static IP address
Activate and configure the IPv6 settings in the printer.
Activate a* from DHCPv6
An off* stateless address autoconfiguration
An IPv6 address manually assigned from DNS server address Manually allocated to IPv8 router address prefix All IPv7 addresses All IPvi2 router
Displays the network addresses.

Configure the printer to automatically switch to PCL emulation regardless of the standard language used by the printers if a printing job requires it.
Configure the printer to automatically switch to PS emulation regardless of the default language of the printers if a printing job requires it.
Temporarily saves print jobs on the hard drive of the printer before printing orders.
Configures the printer for processing binary Macintosh PostScript printing jobs.
Network speed Have the speed of an active Wi-Fi adapter displayed.
Dynamic Host Configuration Protocol (DHCP).
Enter the static IP address of the printer.
Activates IPv6 in the printer.

Activates DHCPv6 in the printer.
Using this option, set the network adapter to accept the automatic IPv6 address configuration entries provided by a router.
Enter the DNS server address.
Assign the IPv6 address.
Assign the IPv6 address.
Enter the address code.
View all IPv6 addresses.
Allow all IPv6 router addresses to be displayed.
Have the printer's Media Access Control (MAC) addresses displayed: The Locally Administered Address, LAA and Universally Administrated Address (UAA).
Configure the printer to automatically switch to PCL emulation regardless of the standard language used by the printers if a printing job requires it.
Configure the printer to automatically switch to PS emulation regardless of the default language of the printers if a printing job requires it.
Temporarily saves print jobs on the hard drive of the printer before printing orders.

Configures the printer for processing binary Macintosh PostScript printing jobs.
Reduce power consumption if the printer does not receive data from the Ethernet network.
Setting up hostnames Set the current TCP/IP hostname.
Domain axes Set the domain name.
Allow NTP server to be updated by DHCP/BOOTP
Allow DHCP/BOOTP customers to update the printer’s NTP settings.
Configuration-free name Enter a service name for the Zeroconf network.
Automatically assign an IP address.
DNS server address Enter the server address of the current domain name system (DNS).
Replacement DNS address Specify the backup of DNS server addresses.
Domain search sequence Enter a list of domain names to find the printer and its resources that are in different domains on the network.
Update the dynamic DNS settings.

300-31536000 (3600*) Specify the current DDNS settings.
5‑254 (254*)
300‑31536000 (604800*)
Update the multicast DNS settings.
WINS address Enter a server address for the Windows Internet Name Service (WINS).
Have the BOOTP assign a printer IP address.
Limited server list Enter an IP address for the TCP connections.
Options for the restricted server list
Set how the IP addresses in the list can access the printer function.
Lock all connections* Only Print lock only Print and HTTP block
256-1500 (1500*) Set a Maximum Transmission Unit (MTU) parameter for TCP connections.
1-65535 (9100*) Enter a RAW port number for printers on a network.
Outbound traffic – maximum speed
Activate the maximum transfer rate of the printer.
Activate the SSLv2 protocol.
Activate the SSLv3 protocol.
Activate TLSv1.0
Activate the TLSv1.0 protocol.

Activate TLSv1.1
Activate the TLSv1.1 protocol.
SSL digit list Set the encryption algorithms that you want to use for SSL or TLS connections.
SNMP versions 1 and 2c
Configure versions 1 and 2c of the Simple Network Management Protocol (SNMP) for installing printer drivers and applications.
Allow from on* SNMP setting
Activate from an AÜP-MIB
Configure version 3 of the SNMP to install and update printer security.
Set from One* login information with read/write protected
Username Password Set login information with read access
No authentication, no data protection authentication and no privacy authentication*

Activate the IP Security Protocol (IPSec).
Set up the IPSec basic configuration.
Set the IPSec encryption.
modp2048 (14)* modp3072 (15) modp4096 (16) modp6144 (17)
Specify the encryption and authentication methods to establish a secure connection.
Duration IKE SA (hours)
Set the waiting time until a new authentication key is generated.
1 2 4 8 24*
Duration IPSec SA (hours)
1 2 4 8* 24
IPSec Device Certificate Provide an IPSec certificate.

Intermediate common key authenticated links
Configure the authenticated connections of the printer.
Certificate-Authenticated Connections
Allow the printer to connect to networks that require authentication before access.
0-65535 seconds (90*) Set an automatic shutdown value so that the LPD program does not wait for unlimited time on hanging or invalid print jobs.
Print out a cover page for all LPD print jobs.
Print a following page for all LPD print jobs.
Activate "Wagon Return Conversion".

Access the embedded web server to monitor and manage the printer.
Configure the settings for HyperText Transfer Protocol Secure (HTTPS) protocol.
Set the printer to use HTTPS connections.
Send emails with FTP.
Local domains Enter domain names for HTTP and FTP servers.
IP address - HTTP proxy Configure the HTTP and FTP server settings.
1-299 (30*) Set the time period before the server stops connection.
Set the number of dial-up attempts on the HTTP/FTP server.
Print with ThinPrint.
4000-4999 (4000*) Set the port number for ThinPrint server.

Bandwidth (bit/second)
100-1000000 (0*) Set the speed at which data is transferred in a ThinPrint environment.
0-64000 (0*) Set the packet size for data transmission.
Configures the printer to switch to PCL emulation regardless of the standard language of the printers when a printing job received via USB port requires it.
Configures the printer to switch to PS emulation regardless of the standard language of the printers when a printing job received via USB port requires it.
Temporarily saves print jobs on the hard drive of the printer before printing orders.
Configures the printer for processing binary Macintosh PostScript printing jobs.
Activate standard USB port.
Register the printer on Google Cloud Print Server.

Print directly from your Google account.
Google Cloud Print Activation
Allow the registered user and other users on the same subnet to locally send print jobs to the printer.
Check the authenticity of your peer certificate for a connection to your Google account.
Set the printer to process PDF files as an image so that it will print faster.
Always print as a picture
SSID Enter the service set identifier (SSID) of the Wi‐Fi network.
Setting pre-shared keys For the pre-shared key, set authentication and validation of users over a Wi-Fi connection.
PSK a. Installations NB
Display the pre-shared key on a network configuration page.
IP address of the group owner Enter the IP address of the group owner.
Pressing button requirements autom. Best.
Accept requests to automatically connect to the network.

Permissions are used.
Control access to the printer functions.
In apps accessing address booklet Manage Address Booklet Edit Shortcode Numbers Create Profiles Manage Bookmark Print of Flash Drive Color Print from Flash drive Scan to flash drive Copy function Colour print color suppression Email function FTP function Return fax function. Faxes allow access to anh. Print jobs User profiles Cancel orders on device language change Internet printing protocol (IPP) scans remotely start S/W print color
Control access to the printer's menu settings.
Menu "Security" Menu “Network/Connections” Menu ”Paper” Menus ”Reports” Functional configuration menus Menu Consumption menu Option card SE-Menu device menu

Control access to the printer’s management options.
Remote Management Firmware Updates App Configuration Operator/Console Lock All Settings Import/export Delete (except Operation)
Control access to printer applications.
New Apps ID copy Scan Center Scan Center User Definition 1 Scan Center user definition 2 Scan CenterUser Definition 3 Scan Center Usage Definition 4 Scan Center Use Definition 5 Scan Center Application User Definition 6 Scan Center Custom Definition 7 Scan Center Customer Definition 8 Scan Center Individual Definition 9 Scan Center
Groups/Rights.
Control the access of groups or users to printer functions, applications and security settings.
Access controls import.
Function access Management menus Device management apps All users
Access controls import.
Function access Management menus Device management Apps Admin

Create local accounts to manage access to the printer functions.
Username/password username password PIN
Accounts with Ben.name/Password
Set the default login method to access the control panel.
Username/password username password PIN
Set the default login method for accessing the browser.
Username/password username password PIN
Schedule access to the USB port.
Record the events in security monitoring log and remote syslog.

Send monitoring protocols to a remote server.
Remote Syslog Server Enter the remote syslog server.
1-65535 (514*) Enter the remote syslog port.
Specify a syslog method for transmitting logged events to a remote server.
Enter a setup code that the printer uses when sending logged events to a remote server.
0 – Kernel messages 1 – User level 2 notifications 3 – Mail system 3 – System daemons 4 – Security/authorisation messages 5 – Messages generated internally by syslogs 6 – Line Printer subsystem 7 – Network messaging subsystem 8 – UUCP subsystem 9 – Time daemon 10 – Security / Authorisation message 11 – FTP daemo 12 – NTP subsystem 13 – Protocol monitoring 14 – Clocking 15 – Times daem 16 – Local use 0 (local0) 17 – Local usage 1 (locally1) 18 – Local uses 2 (loca) 20 – Local Use 4 (locAL4) 21 – Localuse 5 (locat5) 22 – Local utilisation 6 (locals6) 23 – Local used 7 (locale7)
Severity of events to be recorded
Specify the shutdown priority level for logging messages and events.

Remote Syslog n. Prot. Events
Send all events, regardless of severity, to the remote server.
Administrator e-mail address Send an email notification of logged events to the administrator.
Send an email notification to the administrator when a log entry is deleted.
Send an email notification to the administrator when the log is full and starts overwriting the oldest entries.
Behaviour if full protocol
Fix the log memory issues if the storage allocated to the protocol is full.
Overwrite Oldest Entries* Send and Delete Log by Email
E‑Mail warning at % full
Send an email notification to the administrator when the memory allocated for the protocol is full.
% full – Warning level
Send an email notification to the administrator when a log entry is exported.
Send an email notification to the administrator when Enable monitoring is set.
Set how the log file closes the end of each line.
ZV (\n)* WR (\r)WRZV (&r\n).
Attach a digital signature to each exported log file.
Delete the protocol Delete all monitoring protocols.
Export the security protocol to a flash drive.
Syslog (RFC 5424) SysLog (RFc 3164) CSV

Notification document
1-10 (3*) Set the number of failed login attempts before blocking the user.
1-60 min. (5*) Set the time period between failed login attempts before the user is locked.
1-60 min. (5*) Set the duration of the block.
1-120 min. (10*) Set the delay for remote login before automatically logging out of the user.
Max. Invalid PINs
Expiry date for confidential contracts
Set the expiration period for confidential printing.
1 hour 4 hours 24 hours 1 week
Set the expiration period for a print job that you want to repeat.
1 hour 4 hours 24 hours 1 week
Expiry date for contracts to be reviewed
Set the expiration period so that the printer will print a copy for the user to check quality before printing any remaining copies.
1 hour 4 hours 24 hours 1 week

Expiry date for reserved printing
Set the time limit for storing print jobs that can only be printed later.
1 hour 4 hours 24 hours 1 week
Requirement to hold all orders
Set the printer to stop all printing jobs.
Set the printer to print other documents with the same name without overwriting printing jobs.
Search the different servers in the domain for the logged-in user account.
Enable the verification of LDAP certificates.
Determine whether disk encryption is enabled.
Prevent the loss of confidential data in case that the printer or its hard drive should be stolen once.

In onboard memory sp.
Delete all files in the printer memory.
Activate AirPrint printing.
Show all functions protected by Function Access Control (FAC), regardless of the user’s security credential.
Ensure that the user must log in before printing.
Set the default application for print permission.
Set the behavior of the jumper for security reset.
Enable guest access* No impact
0-32 (0*) Enter the minimum number of characters allowed for a password.

Menu settings page Print a report that describes the print settings, settings and configurations
contains.
Device information Print a report that contains information about the printer.
Equipment statistics Print a report that contains information about the use of the printer and consumable status.
Profile list Print a list of profiles stored in the printer.
Stock report Print a report with inventory information such as the printer serial number and model name.
printing patterns and font information available in any printer language.
Printing directory Print the resources stored on flash drive or printer hard disk
are.
All shortcode numbers Print a report that lists the shortcode numbers stored in the printer. Fax short numbers

Fax order protocol Print a report on the 200 last completed fax orders.
Fax call protocol Prints a report on the last 100 unanswered, received and blocked calls.
Print a page that shows the configured network and Wi-Fi settings on the printer.
Print all instructions Prints all instructions
Connection Guide Contains information about connecting the printer as a local (USB) or network printer
Copy Guide Contains information about creating copies and configuring settings
Email Guide Contains information about sending email and configuring settings
Fax Guide Contains information about sending faxes and configuring settings
FTP Guide Contains information about scanning documents and configuring settings
Information Guide Contains additional sources of information about the printer
Printing media instructions Contains information about insertion of paper and specialty print media
Instructions for setting the black and white quality
Contains information about print quality settings for black and white jobs.
Implementation instructions Contains information about moving, finding or transporting the printer
Print Quality Question Guidance Contains information to resolve print quality issues
Consumable Instructions Provides information on ordering consumability

Test pages for print quality Print test pages to identify and fix print quality defects.
Touch the option on the home screen Settlements > Reports > Menu settings page.
Printer menus 144 · Menu Entry Description

securing the printer 145
Determining the Safety Slot
The printer has a safety lock function. The printer can be secured at its location with a common security lock suitable for laptops (place of attachment see figure).

To delete volatile memory or cached data in your printer, turn the printer off.
To delete non-volatile memory or individual settings, device and network settings and security settings as well as embedded solutions, do the following:
1 Touch the option on the home screen Settlements > Equipment > Maintenance > Deletion (out of service).
2 Activate the check box Clean up all information in the permanent storageand then touch them. Deletion.
3 Follow the instructions on display.
1 Touch the option on the home screen Settlements > Equipment > Maintenance > Deletion (out of service).
2 Activate the check box Clean up all information in the permanent storageand then touch them. Deletion.
3 Follow the instructions on display.

securing the printer 146
This process deletes the entire content of the hard drive. If necessary, back up important data from the printer before you start encrypting it.
1 Touch the option on the home screen Settlements > Security > Data carrier encryption > Starting with encryption.
2 Follow the instructions on display.
Touch the option on the home screen Settlements > Equipment > Restore factory specifications > Restore settings > Restore all settings > Recovery > Start.
For more information, see "Deleting the printer memory" on page 145.
The printer uses a standard random access memory (RAM) to temporarily store user data for simple printing and copy jobs.
The printer can use two types of non-volatile memory: EEPROM and NAND
(flash memory). Both types are used to store the operating system, printer settings, network information, scanner and bookmark settings and embedded solutions.
Hard disk space Some printers may have a hard drive installed. The printer hard disk is designed for printer-specific functions. The hard drive allows the printer to retain cached user data from complex printing jobs as well as form and font data.
In the following circumstances, the contents of the installed printer memory should be deleted:
Memory type Description

securing the printer 147

Maintenance of the printer 148
The loudspeaker volume is reset to the default when the session has ended, the printer wakes up from power-efficient or sleep mode, or after being switched on again.
1 Navigate to the control panel:
Settlements > Equipment > Preset settings > Audiofeedback
2 Select the volume.
1 Touch the option on the home screen Settlements > Fax > Analogue faxing equipment > Loudspeaker settings.
1 Switch to the home screen:
Settlements > Network/connections > Wireless
2 Select Device device on printer control panel Then follow the instructions on display.

Maintenance of the printer 149
1 Depending on your mobile device, download the Lexmark Mobile Assistant application from either Google Play Store or online app store.
2 Navigate to the control panel:
Settlements > Network/connections > Wireless > Installation with mobile app > Continue to the printer ID
3 Start the application from your mobile device and accept the terms of use.
5 Tap them Starting the WLAN installationAnd select the printer.
6 Select a Wi-Fi network and enter your login information.
7 Tap them Completing the WLAN device.
At the beginning, make sure you are:
1 Navigate to the control panel:
Settlements > Network/connections > Wireless > Wid‑Fi Protected Setup > Start the keystroke method
2 Follow the instructions on display.
1 Navigate to the control panel:
Settlements > Network/connections > Wireless > Wid‑Fi Protected Setup > Starting the PIN method
2 Copy the eight-digit WPS PIN.
3 Open a web browser and enter the IP address of your access point in the address field.
4 Granting of permissions

Maintenance of the printer 150
4 Go to the WPS settings. More information can be found in the manual for the access point.
5 Enter the eight-digit PIN and save the change.
1 Open the printer folder.
2 Open the printer properties in the context menu of the printers with the new ISP.
3 Configure the port from the list.
4 Update the IP address.
5 Apply the changes.
1 In the System Settings in Apple's menu, navigate to the printer list and select + > IP.
2 Enter the IP address in the address field.
3 Apply the changes.
1 Touch on the home screen Settlements > Network/connections > Network overview > Active adapter > Standard network.
2 Follow the instructions on display.
1 Set the parameters in the printer. a Go to the menu for connection settings via the control panel. b Open the menu for serial port settings and adjust the settings
where appropriate, c Apply the changes.
2 Open the printer folder via the printers and select your printer.

Maintenance of the printer 151
3 Open the printer properties and select the communication port (COM) from the list.
4 Set the communication port (COM) parameters in Device Manager.
1 Turn off the printer and unplug the power cord from the socket.
2 Remove the paper from the standard filing and universal feeder.
3 Remove dust, lint and paper pieces on the printer with a soft brush or vacuum cleaner.
4 Wipe the outside of the printer with a damp, soft, floss-free cloth.
5 Connect the power cord to the socket and turn on the printer.

Maintenance of the printer 152
1 Open the scanner cover.

2 Clean the following areas with a moistened soft, lint-free cloth: • ADZ glass




Maintenance of the printer 153

3 Open the flap E.

4 Clean the following areas with a moistened soft, lint-free cloth: • ADZ glass pad in flap E


Maintenance of the printer 154

5 Close flap E and then scanner cover.
In the United States, you can find information about authorized Lexmark consumable and parts dealers in your area at 1-800-539-6275. Information for other countries or regions can be found under www.lexmark.com Or, contact the dealer from whom you purchased the printer.
1 Touch on the home screen Status/Material.
2 Select the part or consumable you want to inspect.
Optimal operation of your Lexmark printer can only be guaranteed with original parts and consumable materials from Lex mark. The use of consumables or third-party parts could affect the performance, reliability or lifetime of the printer and its image components. In addition, the guarantee cover is affected. Damage caused by the use of consumable materials or third party parts will not be covered by the warranty. All lifetime indicators are designed to use Lexmark consumables and parts. Using consumables or third-party parts can lead to unpredictable results. If image components are used longer than intended, the Lexmark printer or corresponding components can be damaged as a result.

Maintenance of the printer 155

1Only available for contract-bound printers. For more information, contact your Lexmark customer service representative or system administrator.
2 Only supported by Lexmark printer models MX722 and MX725.


Maintenance of the printer 156


3 Only supported by Lexmark printer models MX722 and MX725.
Very little coverage over a longer period of time can cause parts of the exposure unit to fail before the toner is used up.

*This exposure unit is only available for contract-based printers. You can obtain more information from your Lexmark representative or system administrator.
Open flap A and remove the toner cassette and exposure unit to identify the supported type of fixation station. The two-digit fixing station type can be found on the front side of the fixing station, e.g. B. 00 or 01.

Maintenance of the printer 157


Maintenance kit for automatic document feed
Maintenance Kit for ADZ 41X2351
1 Open a web browser and enter the printer’s IP address in the address field.
Article Part number · Printer module maintenance kit (rolls) 41X2352 · Article Part number

Maintenance of the printer 158
2 Click Settlements > Equipment > Notifications.
3 From the menu "Material" on Custom material notifications Click.
4 Select a notification for each consumable.
5 Apply the changes.
1 Open the door A.

2 Remove the used toner cassette.


Maintenance of the printer 159
3 Take the new toner cassette out of its packaging, and shake it to distribute the toner.

4 Insert the new toner cassette.

5 Close the door.
1 Open the door A.

Maintenance of the printer 160
2 Take out the toner cassette.

3 Remove the used exposure unit.

4 Take the new exposure unit out of its packaging, and shake it to distribute the toner.


Maintenance of the printer 161

5 Remove the packaging material.
6 Install the new exposure unit.

7 Insert the toner cassette.
8 Close the door.
1 Open the C flap.

Maintenance of the printer 162

2 Unlock the fixation station.

3 Remove the used fixation station.

4 Take the new fixation station out of the packaging.

Maintenance of the printer 163
5 Install the new fixation station so that it latches audibly.

6 Lock the fixing station.

7 Close the door.

Maintenance of the printer 164
1 Remove the standard shelf cover.

2 Open the C flap.

Maintenance of the printer 165
3 Unlock the Hot Roll fixer.

4 Remove the used hot roll fixer.

5 Take the new Hot Roll fixer out of its packaging.
6 Insert the new Hot Roll fixer so that it latches audibly.

7 Lock the Hot Roll fixer.

8 Close the door.

Maintenance of the printer 166
9 Install the standard shelf cover.

1 Open the door A.

Maintenance of the printer 167
2 Take out the toner cassette.
3 Remove the exposure unit.

4 Remove the used transfer role.

Maintenance of the printer 168

5 Take the new transfer roll out of packaging.
6 Use the new transfer role until it snaps in with one click.


Maintenance of the printer 169
7 Insert the exposure unit.
8 Insert the toner cassette.
9 Close the door.
1 Pull the tray out.

Maintenance of the printer 170
2 Take out the used draw-in roller.

3 Take the new feed roll out of the packaging.
4 Use the new pull-in role.

5 Push the tray into the printer.
1 Open the universal feeder.

Maintenance of the printer 171

2 Take out the used draw-in roller.

3 Take the new feed roll out of the packaging.

Maintenance of the printer 172
4 Use the new pull-in role.

5 Close the universal feeder.
1 Turn off the printer.
2 Open the door D.

Maintenance of the printer 173

3 Remove the cover of the ADZ draw-in roller.

4 Remove the used ADZ feed roller.


Maintenance of the printer 174
5 Take the new feed roll out of the packaging.
6 Use the new intake roller until it snaps into place with one click.


Maintenance of the printer 175
7 Insert the cover of the ADZ feed roller until it snaps in with one click.

8 Close the door.
9 Turn on the printer.
1 Turn off the printer.
2 Open the door D.

Maintenance of the printer 176
3 Remove the cover of the ADZ draw-in roller.
4 Remove the used ADZ feed roll.

5 Take the new ADZ feed roll out of packaging.

Maintenance of the printer 177
6 Use the new separator until it snaps in with one click.


Maintenance of the printer 178
7 Insert the cover of the ADZ feed roller until it snaps in with one click.
8 Close the door.
9 Turn on the printer.
1 Turn off the printer.
2 Open the door D.

Maintenance of the printer 179
3 Remove the cover of the ADZ separator role.

4 Remove the used ADZ separating role.

5 Take the new ADZ separating role out of packaging.

Maintenance of the printer 180
6 Use the new intake roller until it snaps into place with one click.

7 Use the cover of the ADZ separator until it snaps in with one click.


Maintenance of the printer 181
8 Close the door.
9 Turn on the printer.
1 Turn off the printer.
2 Open the door D.
3 Remove the cover of the ADZ separator role.
4 Remove the ADZ separating role.

Maintenance of the printer 182

5 Remove the used ADZ torque limit.

6 Take the new ADZ torque limitation out of the packaging.
7 Use the new ADZ torque limitation.


Maintenance of the printer 183
8 Use the new ADZ separator role until it snaps in with one click.
9 Use the cover of the ADZ separator until it snaps in with one click.

Maintenance of the printer 184
10 Close the door.
11 Turn on the printer.
Instructions for transport can be found at http://support.lexmark.com, or contact the responsible customer service.

Maintenance of the printer 185
1 Tap on the home screen Settlements > Equipment > Energy management > Eco-mode.
2 Select a setting.
1 Tap on the home screen Settlements > Equipment > Energy management > Time-barriers > Eco-mode.
2 Select a time period that the printer should wait until energy-saving mode is activated.
1 Tap on the home screen Settlements > Equipment > Energy management > Time-barriers > Sleep mode time-off.
2 Select a time period that the printer should wait until activation of sleep mode.
1 On the Home screen, press on the option Settlements > Equipment > Preset settings > Screen brightness.
2 Adjust the setting.

Maintenance of the printer 186
How to return products for recycling to Lexmark:
1 Visit www.lexmark.com/recycle.
2 Select the device you want to dispose of.
Lexmark’s goal is to minimize packaging. Less packaging means that Lexmark printers are transported in the most effective and environmentally friendly way possible, with less packaging to be disposed of. This leads to a reduction in the greenhouse effect, greater energy savings and protection of natural resources. Lexmark also offers recycling of packaging components in some countries or regions. For more information, call www.lexmark.com/recycle Then select your country or region. Information on available packaging recycling programmes is included in the product recycling information.
Wherever there are facilities for recycling corrugated board, the cartons used by Lexmark can be fully recycled. These facilities may not exist in your area.
Wherever facilities are available for recycling foam, foam is used in the packaging used by Lexmark. These facilities may not exist in your area.
If you return a cassette to Lexmark, you can use the packaging in which it was delivered. Lexmark also recycles the packaging.
With the Lexmark Printed Cassette Return Program, you can return used cassades to LexMark for reuse or recycling free of charge. All empty cassettes returned to Lexmark are either reused or dismantled for recycling. The packaging for returning the cassette is also recycled.
To return Lexmark cassette for reuse or recycling, proceed as follows:
1 Visit www.lexmark.com/recycle.
2 Select the device you want to dispose of.

Removing traffic jams 187
Avoiding paper jams
Properly insert paper Wrongly inserting paper




Removing traffic jams 188

Removing traffic jams 189


Remove from traffic jams 190
1 Pull the tray out.

2 Remove the jammed paper.

3 Push the tray into the printer.
1 Open the door A.

Removing traffic jams 191
2 Take out the toner cassette.
3 Remove the exposure unit.


Removing traffic jams 192
4 Pull out the duplex unit.

5 Remove the jammed paper.

6 Insert the duplex unit.

Removing traffic jams 193
7 Insert the exposure unit.
8 Insert the toner cassette.
9 Close the door.
1 Open the C flap.
2 Remove the jammed paper from one of the following areas:

Removing traffic jams 194



3 Close the door.
Remove the jammed paper.

Removing traffic jams 195

1 Take the paper from the universal feeder.

2 Remove the jammed paper.
3 Before inserting, bend the paper in both directions, fan it up and level out the edges.
4 Re-introduction of paper.


Removing traffic jams 196
1 Remove all original documents from the ADZ tray.
2 Open the door D.
3 Remove the jammed paper.

4 Closing flap D.
5 Open the scanner cover.

Removing traffic jams 197
6 Open the flap E.

7 Remove the jammed paper.

8 Close flap E and then scanner cover.

Problems with network connection
Go to step 2.
Install a supported browser.
Check if you have a supported browser:
Is your browser supported?
Step 2 Make sure the printer’s IP address is correct.
Go to step 3.
Enter the correct IP address of the printer in the address field.
Find the printer’s IP address:
Is the printer's IP address correct?
Go to step 4.
Turn on the printer.
Check if the printer is on.
Is the printer on?
Go to step 5.
Contact the system administrator.
The network connection must be active.
Is the network connection active?
Go to step 6.
Check the cable connections.
Make sure that the cable connections to the printer and printing server are properly connected. Further information can be found in the installation manual included with the printer.
Are the cables permanently connected?

Go to step 7.
Contact the system administrator.
Check if the web proxy servers are disabled.
Are the Webproxyservers deactivated?
The problem has been resolved.
Contact them. Customer service.
Access the embedded web server.
Is access to the Embedded Web Server successful?
Go to step 2.
Wait until the printer has finished the other job.
Check that the printer is not currently performing another printing, copying, scanning or fax job.
Is the printer ready?
Step 2 Check if the flash drive has been connected to the front USB port.
Go to step 3.
Connect the flash drive to the correct port.
Is the flash drive connected to the correct port?
Step 3 Check if the flash drive is supported. For more information, see "Supported Flash Drives and File Types" on page 44.
Go to step 4.
Connect a supported flash drive.
Is the flash drive supported?
The problem has been resolved.
Contact them. Customer service.
a Check if the USB port is activated. Other
For information, see "Activate the USB port" on page 199. b Remove the flash drive and reconnect it.
Does the printer recognize the flash drive?
Touch the option on the home screen Settlements > Network/connections > USB > Activate USB port.

1 Touch the option on the home screen Settlements > Reports > Network > Network configuration page.
2 In the first section of the network configuration page, check if it has a status called "Connected".
If the status is “Not connected”, the LAN drop may not be active or the network cable might be faulty. Contact the administrator to resolve the issue.
The problem has been resolved.
Go to step 2.
Turn the printer off, wait for about 10 seconds and then turn it back on.
Does the internal option work properly?
Continue with step 4.
Go to step 3.
Print a menu settings page and check that the internal option is listed in the list of installed functions.
Is the internal option listed on the menu settings page?
The problem has been resolved.
Go to step 4.
Check that the internal option is installed correctly on the controller board.
a Turn off the printer and unplug the power cord
the socket. b Make sure that the internal option is in suitable
connection is inserted on the control circuit board. c Connect the power cord to the socket and turn it on
the printer.
Does the internal option work properly?

The problem has been resolved.
Contact them. Customer service.
a Check if the internal option is available in printer driver
is.
Does the internal option work properly?
Try one or more of the following methods:
Try one or more of the following methods:
Try one or more of the following methods:
Troubleshooting 201 · Action Yes No · Step 4

Buy a cassette with the region matching your printer area or buy a worldwide valid casing to fix this problem.
Worldwide or undefined region 0
North America (USA, Canada) 1
European Economic Area, Western Europe, Nordic Countries, Switzerland 2
Asia and Pacific 3
Rest of Europe, Middle East and Africa 5
The printer has determined that consumable materials or parts are used which do not come from Lexmark.
Your Lexmark printer works best when using original consumable materials and original parts from LexMark. The use of consumables or third-party parts could affect the performance, reliability or lifetime of the printer and its image components.
All lifetime indicators are designed to use Lexmark consumables and parts. Using consumables or third-party parts can lead to unpredictable results. If image components are used longer than intended, the Lexmark printer or corresponding components can be damaged as a result.
If you accept these risks individually and in total, and with the use of consumables or parts, at which if it is not the original for which printer wants to continue, press buttons on the control panel at the same time X and # And hold it for 15 seconds.

If you do not wish to accept these risks, remove consumables or third-party parts from the printer and place them. use original consumable materials or Lexmark parts. For more information, see "Using Lexmark Original Accessories and Consumption Materials" on page 154.
If the printer is not printing after simultaneously pressing the buttons X and # Press and hold for 15 seconds, reset the consumable counter.
1 Navigate to the control panel:
Settlements > Equipment > Maintenance > Configuration menu > Consumable and meters
2 Select the part or the consumable, which is or Then you want to reset it, and then choose Start.
3 Read the warning and select Continuation.
4 Press at the same time X and # and hold it for 15 seconds to delete the message.
Go to step 2.
The problem has been resolved.
a Use an envelope that is in a dry environment
was stored.
Do the envelopes stick to each other when printing?
Contact them. Customer service.
The problem has been resolved.
a Make sure that the option "Paper grade" to "Envelope"
is set. Navigate to the control panel:
Settlements > Paper > Subject configuration > Paper size/grade b Send the print job.
Do the envelopes stick to each other when printing?

The problem has been resolved.
Go to step 2.
a Touch the option on the home screen Settlements >
Printing > Layout > Sorting. b Option "Sort".
c Print the document.
The pages sorted correctly printed?
The problem has been resolved.
Go to step 3.
a In the document you want to print, open the dialog box
"Printing." b Print the document.
The pages sorted correctly printed?
The problem has been resolved.
Contact them. Customer service.
a Reduce the number of pages to print. b Print the document.
The pages sorted correctly printed?
The problem has been resolved.
Go to step 2.
a Check if the trays are of the same paper format and
paper grade. b Check that the paper guides are positioned correctly.
c Print the document.
Are the subjects connected correctly?
The problem has been resolved.
Go to step 3.
a Navigate to the control panel:
Settlements > Paper > Subject configuration > Paper size/grade b Make sure that the settings "Paper format" and
"Category of paper" correspond to the associated compartment. c Print the document.
Are the subjects connected correctly?

The problem has been resolved.
Contact them. Customer service.
a Make sure following joining compartments is set
Automatic. For more information, see "Connecting compartments" on page 37. b Print the document.
Are the subjects connected correctly?
Paper jams are often involved.
Go to step 2.
The problem has been resolved.
a Pull the tray out. b Check that the paper is inserted correctly.
Do paper jams often occur?
Go to step 3.
The problem has been resolved.
a Navigate to the control panel:
Settlements > Paper > Subject configuration > Paper size/grade b Set the appropriate paper format and type of paper.
c Print the document.
Do paper jams often occur?
Contact them. Customer service.
The problem has been resolved.
a Insert paper from a new package.
Do paper jams often occur?

a Touch the option on the home screen Settlements >
The problem has been resolved.
Contact them. Customer service.
Equipment > Notifications > Restoring the dammed pages b Select One or Automatic.
c Apply the changes.
Are the jammed pages reprinted?
Empty or white sides

Printer models without touchscreen to navigate through the settings.
Go to step 2.
The problem has been resolved.
a Check if the printer is Lexmark-owned and
supported toner cassette is used.
Does the printer output blank or white pages?

Go to step 3.
The problem has been resolved.
a Remove all packaging material from the
Exposure unit.
1 Take out the toner cassette first and then take out the photoconductor.
Does the printer output blank or white pages?
Go to step 5.
Go to step 4.
Check that the transfer role is installed correctly.
Is the transmission role correctly installed?
Go to step 5.
The problem has been resolved.
a Remove the transfer role and put it back in. b Print the document.
Does the printer output blank or white pages?
Contact them. Customer service.
The problem has been resolved.
a Replace the photo conductor. b Print the document.
Does the printer output blank or white pages?


Printer models without touchscreen to navigate through the settings.
Go to step 2.
The problem has been resolved.
a Check if the printer is Lexmark-owned and
supported toner cassette is used.
Is the expression dark?
Go to step 3.
The problem has been resolved.
a Turn off the printer, wait for about 10 seconds
Then turn the printer back on. b Reduce the toner application. Navigate to the control panel:
Settlements > Printing > Quality c Print the document.
Is the expression dark?
Go to step 4.
The problem has been resolved.
a Enter the paper type depending on operating system in the dialog box
"Printing Presets" or "Print".
Is the expression dark?
Step 4 Check if the paper has a textured or rough surface.
Go to step 5.
Continue with step 6.
Do you print on structured or rough paper?
Go to step 6.
The problem has been resolved.
a Replace the structured paper with regular paper. b Print the document.
Is the expression dark?

Go to step 7.
The problem has been resolved.
a Insert paper from a new package.
Is the expression dark?
Go to step 8.
The problem has been resolved.
a Take out the exposure unit and place it
again.
Is the expression dark?
Contact them. Customer service.
The problem has been resolved.
a Replace the photo conductor. b Print the document.
Is the expression dark?

Printer models without touchscreen to navigate through the settings.

Go to step 2.
The problem has been resolved.
a Check if the printer is Lexmark-owned and
supported toner cassette is used.
Are fine lines printed correctly?
Contact them. Customer service.
The problem has been resolved.
a Adjust the print quality settings.
1 Navigate to the control panel:
Settlements > Printing > Quality > Pixel elevation > Font 2 Increase the toner order to 7. Navigate to the control panel:
Settlements > Printing > Quality b Print the document.
Are fine lines printed correctly?

Printer models without touchscreen to navigate through the settings.
Go to step 2.
The problem has been resolved.
a Check if the printer is Lexmark-owned and
supported toner cassette is used.
Is the paper folded or creased?

Go to step 3.
The problem has been resolved.
a Insert paper from a new package.
Is the paper folded or creased?
Contact them. Customer service.
The problem has been resolved.
a Enter the paper type depending on operating system in the dialog box
"Printing Presets" or "Print".
Is the paper folded or creased?

Printer models without touchscreen to navigate through the settings.
Go to step 2.
The problem has been resolved.
a Turn off the printer, wait for 10 seconds and
Then turn the printer back on. b Reduce the toner application.
Navigate to the control panel:
Settlements > Pressure > Quality C Print the document.
Is there a gray background on the printouts?

Go to step 3.
The problem has been resolved.
a Check if the printer is Lexmark-owned and
supported toner cassette is used.
Is there a gray background on the printouts?
Go to step 4.
The problem has been resolved.
a Enter the paper type depending on operating system in the dialog box
"Printing Settings" or "Print".
Is there a gray background on the printouts?

Go to step 5.
The problem has been resolved.
a Remove the exposure unit.
Exposure unit.

Is there a gray background on the printouts?
Contact them. Customer service.
The problem has been resolved.
a Replace the photo conductor. b Print the document.
Is there a gray background on the printouts?


The problem has been resolved.
Go to step 2.
a Slide the paper guides into the one for the inserted paper
intended position. b Print the document.
Are the edges right?
The problem has been resolved.
Contact them. Customer service.
a Enter the paper size depending on operating system in the dialog box
"Printing Settings" or "Print".
Are the edges right?

Printer models without touchscreen to navigate through the settings.

Go to step 2.
The problem has been resolved.
a Check if the printer is Lexmark-owned and
supported toner cassette is used.
Is the expression pale?
Go to step 3.
The problem has been resolved.
a Turn off the printer, wait for about 10 seconds
Then turn the printer back on. b Increase the toner order. Navigate from the control panel to:
Settlements > Pressure > Quality C Print the document.
Is the expression pale?
Go to step 4.
The problem has been resolved.
a Enter the paper type depending on operating system in the dialog box
"Printing Settings" or "Print".
Is the expression pale?
Step 4 Check that the print resolution is set to 600 dpi.
Go to step 5.
The problem has been resolved.
a Navigate from the control panel to:
Settlements > Printing > Quality > Pressure resolution b Print the document.
Is the expression pale?

Go to step 6.
The problem has been resolved.
a Take the toner cassette first, and then take the photoconductor.
out.
Exposure unit. c Shake the exposure unit to re-engage the toner
Then distribute and use them. d Insert the toner cassette. e Turn off the printer, wait for 10 seconds and
Then turn the printer back on. f Print the document.
Is the expression pale?
Go to step 7.
The problem has been resolved.
a If the problem arises after installing a new maintenance kit
If the kit occurs, check that the transfer role included in the Kit is installed.
Is the expression pale?
Step 7 Check the status of the exposure unit. Navigate from the control panel to:
Go to step 8.
Contact them. Customer service.
Is the exposure unit almost consumed?
Contact them. Customer service.
The problem has been resolved.
a Replace the photo conductor. b Print the document.
Is the expression pale?


Printer models without touchscreen to navigate through the settings.
Go to step 2.
The problem has been resolved.
a Check if the printer is Lexmark-owned and
supported toner cassette is used.
Is the expression blotchy?
Go to step 3.
Contact them. Customer service.
Check the printer for leaked toner contamination.
Is the printer free of leaked toner?
Step 3 Check the status of the exposure unit. Navigate to the control panel:
Go to step 4.
Contact them. Customer service.
Is the exposure unit almost consumed?
Contact them. Customer service.
The problem has been resolved.
a Replace the photo conductor. b Print the document.
Is the expression blotchy?


Printer models without touchscreen to navigate through the settings.
Go to step 2.
The problem has been resolved.
a Check if the printer is Lexmark-owned and
supported toner cassette is used.
Is the paper corrugated?
Go to step 3.
The problem has been resolved.
a Bring the guides in the tray for the inserted paper into
The correct position. b Print the document.
Is the paper corrugated?
Go to step 4.
The problem has been resolved.
a Enter paper format and type of paper depending on the operating system
in the "Print Presettings" or "Printing" dialog box.
Is the paper corrugated?
Go to step 5.
The problem has been resolved.
a Take the paper out of the tray and turn it around. b Print the document.
Is the paper corrugated?

Go to step 6.
The problem has been resolved.
a Insert paper from a new package.
Is the paper corrugated?
Contact them. Customer service.
The problem has been resolved.
a Check if the inserted paper is supported.
Is the paper corrugated?

Printer models without touchscreen to navigate through the settings.
Go to step 2.
The problem has been resolved.
a Bring the guides in the tray for the inserted paper into
The correct position. b Print the document.
Is the expression skewed or distorted?
Go to step 3.
The problem has been resolved.
a Check if the inserted paper is supported.
Is the expression skewed or distorted?

Contact them. Customer service.
The problem has been resolved.
a Check the recording wheel in the compartment for damage and
Contaminants and replace them if necessary. b Print the document.
Is the expression skewed or distorted?

Printer models without touchscreen to navigate through the settings.
Go to step 2.
The problem has been resolved.
a Check if the printer is Lexmark-owned and
supported toner cassette is used.
Does the printer print completely black pages?
Go to step 3.
The problem has been resolved.
a Take out the exposure unit and place it
again.
Does the printer print completely black pages?

Go to step 4.
The problem has been resolved.
a Remove the exposure unit.
Exposure unit.
Does the printer print completely black pages?
Step 4 Check the image unit for damage.
Contact them. Customer service.
Go to step 5.
Is the exposure unit undamaged?
Contact them. Customer service.
The problem has been resolved.
a Replace the photo conductor. b Print the document.
Does the printer print completely black pages?


Printer models without touchscreen to navigate through the settings.
Go to step 2.
The problem has been resolved.
a Check if the printer is Lexmark-owned and
supported toner cassette is used.
Are text or pictures cut off?
Go to step 3.
The problem has been resolved.
a Take out the exposure unit and place it
again.
Are text or pictures cut off?

Go to step 4.
The problem has been resolved.
a Remove the exposure unit.
Exposure unit.
Are text or pictures cut off?
Contact them. Customer service.
The problem has been resolved.
a Replace the photo conductor. b Print the document.
Are text or pictures cut off?


For printer models without a touchscreen, press to navigate through the settings.
Go to step 2.
The problem has been resolved.
a Check if the printer is Lexmark-owned and
supported toner cassette is used.
Does the toner rub off easily?
Go to step 3.
The problem has been resolved.
a Enter the paper type depending on operating system in the dialog box
"Printing Settings" or "Print".
Does the toner rub off easily?
Contact them. Customer service.
The problem has been resolved.
a Remove the fixation station and reconnect it. b Print the document.
Does the toner rub off easily?


Printer models without touchscreen to navigate through the settings.
Go to step 2.
The problem has been resolved.
a Check if the printer is Lexmark-owned and
supported toner cassette is used.
Does the expression have horizontal, bright stripes?
Contact them. Customer service.
The problem has been resolved.
a Turn off the printer, wait for about 10 seconds
Then turn the printer back on. b Print the document.
Does the expression have horizontal, bright stripes?

Printer models without touchscreen to navigate through the settings.

a Check if the printer is Lexmark-owned and
Contact them. Customer service.
The problem has been resolved.
supported toner cassette is used.
Does the expression have vertical, bright stripes?

Printer models without touchscreen to navigate through the settings.
Go to step 2.
The problem has been resolved.
a Check if the printer is Lexmark-owned and
supported toner cassette is used.
Does the expression have vertical white lines?
Go to step 3.
The problem has been resolved.
Fix problems with slow printing. For more information, see "Slow Printing" on page 235.
Does the expression have vertical white lines?
Contact them. Customer service.
The problem has been resolved.
a Replace the photo conductor. b Print the document.
Does the expression have vertical white lines?


Printer models without touchscreen to navigate through the settings.
Go to step 2.
The problem has been resolved.
a Check if the printer is Lexmark-owned and
supported toner cassette is used.
Does the expression have vertical, dark stripes?
Go to step 3.
The problem has been resolved.
a Take the toner cassette first, and then take the photoconductor.
out.
c Print the document.
Does the expression have vertical, dark stripes?

Go to step 4.
The problem has been resolved.
a Remove the exposure unit.
Exposure unit.
Does the expression have vertical, dark stripes?
Contact them. Customer service.
The problem has been resolved.
a Check if there is a strong pressure on the right side of the printer.
Predominant light incidence, and move the printer if necessary. b Print the document.
Does the expression have vertical, dark stripes?


Printer models without touchscreen to navigate through the settings.
Troubleshooting 229

Step 1 Create a double-sided copy with the ADZ and an empty sheet of paper.
Go to step 2.
Continue with step 3.
Do vertical, dark lines or stripes appear on the printouts?
Go to step 3.
The problem has been resolved.
Clean the following areas with a moistened soft, lint-free cloth:


Do vertical, dark lines or stripes appear on the printouts?
Troubleshooting 230 · Action Yes No · Step 2

Go to step 4.
The problem has been resolved.
a Enter the paper type depending on operating system in the dialog box
"Printing Settings" or "Print".
Do vertical, dark lines or stripes appear on the printouts?
Go to step 5.
The problem has been resolved.
a Insert paper from a new package.
Do vertical, dark lines or stripes appear on the printouts?
Contact them. Customer service.
The problem has been resolved.
a Take out the lighting kit and put it back
one.
Do vertical, dark lines or stripes appear on the printouts?


Printer models without touchscreen to navigate through the settings.
Go to step 2.
The problem has been resolved.
a Remove the exposure unit.
Exposure unit.
Does the expression have vertical, dark lines and missing images?
Contact them. Customer service.
The problem has been resolved.
a Check if the printer is Lexmark-owned and
supported toner cassette is used.
Does the expression have vertical, dark lines and missing images?


For printer models without a touchscreen, press to navigate through the settings.
Go to step 2.
Measure the distance, and contact them. Customer service.
Use the Print Quality Testing pages to check if repetitive irregularities occur at any of the following intervals:
Is the distance of repeating irregularities identical to one of the dimensions?
Contact them. Customer service.
The problem has been resolved.
a Replace the photo conductor. b Print the document.
Do the repetitive irregularities occur?
The problem has been resolved.
Go to step 2.
a Check on the operator console whether the documents in the list
the orders suspended are listed.
Are the documents printed?

The problem has been resolved.
Go to step 3.
The print job may contain a formatting error or invalid data.
Are the documents printed?
Step 3 When printing over the Internet, the printer may interpret several order titles as duplicates.
The problem has been resolved.
Go to step 4.
a Open the "Print Settings" dialog box. b In the "Print and Retain" section, select the option
Keeping duplicate documents. c Enter a PIN. d Send the print job again.
a Save and name each printer job
different. b Send the order individually.
Are the documents printed?
The problem has been resolved.
Go to step 5.
a Delete some stopped jobs to printer memory
release. b Send the print job again.
Are the documents printed?
The problem has been resolved.
Contact them. Customer service.
a Upgrade the printer memory. b Send the print job again.
Are the documents printed?

Step 1 Make sure the printer cable is securely connected to the printers and computer, printing servers, options or other networking device.
Go to step 2.
The problem has been resolved.
Does the printer print slowly?
Go to step 3.
The problem has been resolved.
a Make sure the printer is not in savings mode or
silent mode.
Settlements > Equipment > Maintenance > Configuration menu > Equipment operation > Quiet mode
For printer models without a touchscreen, press to navigate through the settings. b Print the document.
Does the printer print slowly?
Go to step 4.
The problem has been resolved.
a Enter the print resolution depending on the operating system in
The "Print Settings" or "Printing" dialog box. b Set the resolution to 600 dpi.
c Print the document.
Does the printer print slowly?
Go to step 5.
The problem has been resolved.
a Navigate from the control panel to:
Settlements > Printing > Quality > Pressure resolution
For printer models without a touchscreen, press to navigate through the settings. b Set the resolution to 600 dpi.
c Print the document.
Does the printer print slowly?

Go to step 6.
The problem has been resolved.
a Enter the paper type depending on operating system in the dialog box
"Printing Settings" or "Print".
Does the printer print slowly?
Go to step 7.
The problem has been resolved.
a Make sure that the printer settings for paper structure
and weight matches the properties of the loaded paper.
Does the printer print slowly?
Step 7 Remove stopped orders.
Go to step 8.
The problem has been resolved.
Does the printer print slowly?
Go to step 9.
The problem has been resolved.
a Make sure the printer is not overheating.
Does the printer print slowly?
Contact them. Customer service.
The problem has been resolved.
a Extend the printer memory. b Print the document.
Does the printer print slowly?

The problem has been resolved.
Go to step 2.
a Select the dialog window in the document to be printed
"Printing", and check if you have selected the correct printer. b Print the document.
Is the document printed?
The problem has been resolved.
Go to step 3.
a Check if the printer is on. b Fix any error messages that appear on the display
will become. c Print the document.
Is the document printed?
The problem has been resolved.
Go to step 4.
a Check if the connections are working and whether the cables
are properly connected to the computer and printer.
Further information can be found in the installation manual included with the printer. b Print the document.
Is the document printed?
The problem has been resolved.
Go to step 5.
a Turn off the printer, wait about 10 seconds and
Turn it back on. b Print the document.
Is the document printed?
The problem has been resolved.
Contact them. Customer service.
a First, remove the printer software and install
Then again, they.
Is the document printed?

Step 1 Check if the power cable is connected to the source of electricity.
The problem has been resolved.
Go to step 2.
Step 2 Check if the power supply is interrupted by a circuit breaker or another switch.
Turn on the power button or reset the circuit breaker.
Go to step 3.
Is the power supply interrupted by a circuit breaker or another switch?
Go to step 4.
Turn on the printer.
Check if the printer is on.
Is the printer on?
Press the power button to turn on the printer again.
Go to step 5.
Check if the printer is in sleep or energy-saving mode.
Is the printer in sleep or energy-saving mode?
Step 5 Check that the cables connecting the printer and computer are plugged into the correct ports.
Go to step 6.
Plug the cables into the right connections.
Are the cables plugged into the right connections?
Step 6 Turn off the printer, install hardware options and turn it back on afterwards.
The problem has been resolved.
Go to step 7.
For more information, see the installation manual included with the option.
Step 7 Install the correct printer driver.
The problem has been resolved.
Go to step 8.
Step 8 Turn the printer off, wait for about 10 seconds and then turn it back on.
The problem has been resolved.
Contact them. Customer service.

1 Touch the option on the home screen Settlements > Printing > Quality.
2 Adjust the toner order.
3 Apply the changes.
Go to step 2.
Insert the right paper size and type of paper.
a Check that you are using the correct paper. b Print the document.
Is the document printed on the correct paper?
The problem has been resolved.
Go to step 3.
a Enter paper format and type of paper depending on the operating system
in the "Print Settings" or "Printing" dialog box.
Settlements > Paper > Subject configuration > Paper size/grade b Make sure that the settings are set in the box
paper correspond. c Print the document.
Is the document printed on the correct paper?
The problem has been resolved.
Contact them. Customer service.
a Check if the compartments are connected.
For more information, see "Connecting compartments" on page 37. b Print the document.
Is the document about correct delivery printed?

Step 1 Fix any error messages that appear on the display.
The problem has been resolved.
Go to step 2.
Can you send or receive a fax?
The problem has been resolved.
Go to step 3.
Make sure the cable connections of the following devices are properly connected:
Can you send or receive a fax?
Step 3 Check if a dial is heard.
Go to step 5.
Go to step 4.
Do you hear a dial-up?
The problem has been resolved.
Go to step 5.
Check the phone jack on the wall.
a Connect the analog phone directly to the telephone jack. b Wait for the dial.
c If you do not hear the message, use another
Telephone cable. d If you still don't hear a dial, connect that.
Telephone cable with another telephone jack. e When you hear a sign, connect the printer to
this telephone socket.
Can you send or receive a fax?

The problem has been resolved.
Go to step 6.
Check if the printer is connected to an analog telephone service or with the correct digital connection.
Can you send or receive a fax?
Step 6 Temporarily disconnect other devices and deactivate other phone services.
The problem has been resolved.
Go to step 7.
a Disconnect other devices (such as answering machines, computer with
Modems or telephone cable splitters located between the printer and the phone line. b Deactivate the knock-on function and voicemail. Other
You can get information from your telephone company.
Can you send or receive a fax?
Step 7 Scan each page of the original document individually.
The problem has been resolved.
Contact them. Customer service.
a Select the fax number. b Scan the document.
Can you send or receive a fax?
Troubleshooting 241 · Action Yes No · Step 5

Step 1 Place the original document properly in the automatic document feeder (ADZ) or on the scanner glass.
The problem has been resolved.
Go to step 2.
Can you send fax messages?
The problem has been resolved.
Contact them. Customer service.
Set up the short number properly.
Can you send fax messages?
Step 1 Make sure that the compartment or universal feeder is not empty.
The problem has been resolved.
Go to step 2.
Can you receive fax messages?
Step 2 Check the settings of ringing delay.
The problem has been resolved.
Go to step 3.
a In the Home screen, press the option Settlements > Fax >
Analogue fax configuration > Fax receiving settings > Call sign to call acceptance. b Adjust the setting as needed.
Can you receive fax messages?
Step 3 Replace the toner cassette.
The problem has been resolved.
Contact them. Customer service.
Further information can be found in the short manual, which is included with the respective consumable materials.
Can you receive fax messages?

Step 1 Make sure the print quality has not deteriorated.
The problem has been resolved.
Go to step 2.
a Go to the operator console Settlements >
Detection of errors > Print pages for print quality tests. b Correct any defects in the print quality. Other
For information, see "Print quality is bad" on page 206.
Is the fax print quality satisfactory?
Step 2 Reduce the fax speed.
The problem has been resolved.
Contact them. Customer service.
a Navigate to the control panel:
Settlements > Faxes > Analog fax equipment > Fax-receive settings > Admin control b Select "Max" in the menu. "Speed" is a lower
Transmission speed off.
Is the fax print quality satisfactory?
The problem has been resolved.
Go to step 2.
a Turn off the printer, wait about 10 seconds and
Turn it back on. b Send the scan job again.
Can you send the scan job?
The problem has been resolved.
Contact them. Customer service.
a Make sure that the cables between the printer and
Print servers are properly connected.
Further information can be found in the installation manual included with the printer. b Send the scan job again.
Can you send the scan job?


a Make sure that the document or photo with
The upper left corner of the scanner glass is located on the side facing downwards. b Copy the document or photo.
a Make sure that the selected paper format corresponds to the one in the tray
the inserted paper. b Copy the document or photo.

a Wipe the scanner glass and ADZ glass with a
moistened, soft and lint-free cloth. b Make sure that the document or photo with
The upper left corner of the scanner glass is located on the side facing downwards. c Copy the document or photo.
a Check the quality of the original document or photo. b Adjust the settings of scan quality.
ABCDE ABCRETE
Fix 244 · Leading edge · Trailing edge

Go to step 2.
The problem has been resolved.
a Open the scanner cover. b Wipe the ADF Glaspad (A) and ADF glass (B) with a
moistened, soft and lint-free cloth.
c Close the scanner cover.
Do the scanned documents have vertical stripes?
Contact them. Customer service.
The problem has been resolved.
a Open the scanner cover. b Wipe the ADF Glass (A) and ADF glasspad (B) into flap E with
a moistened, soft and lint-free cloth.
c Close the scanner cover.
Do the scanned documents have vertical stripes?
The problem has been resolved.
Go to step 2.
Check the cable connections.
a Make sure that the Ethernet or USB cable
is properly connected to the computer and printer. b Send the scan job again.
Is the scan job successful?

The problem has been resolved.
Go to step 3.
Check the file you want to scan.
a Make sure that the filename is not already in the destination folder
is used. b Make sure the document or photo you are scanning
If you wish, it is not open in another application. c Send the scan job again.
Is the scan job successful?
The problem has been resolved.
Contact them. Customer service.
a Make sure that in the settings for
Target configuration either the check box Attach time stamps or the check box Overwrite existing file is activated. b Send the scan job again.
Is the scan job successful?
Remove the disturbing objects that prevent closing of the scanner unit.
The problem has been resolved.
Contact them. Customer service.
Could the scanner unit be closed properly?
Close any other applications that hinder the scanning process.
Contact them. Customer service.
The problem has been resolved.
Does it still take too long to scan, or does the computer crash?
The problem has been resolved.
Go to step 2.
a Check if the printer is on. b Fix any error messages that appear on the display
will become. c Copy or scan the document.

The problem has been resolved.
Go to step 3.
a Check that the power cable is correctly connected to
The printer and the power source are connected.
The problem has been resolved.
Contact them. Customer service.
a Turn off the printer, wait about 10 seconds and
Turn it back on. b Copy or scan the document.
1 Press on the home screen Settlements > Equipment > Maintenance > Configuration menu > Scanner configuration > Manual scanner registration.
2 Press "Quick pressure" in the test menu Start.
3 Place the quick test print side on the scanner glass, and touch it Flatbed registration.
4 Press "Quick copy" in the test menu Start.
5 Compare the quick copy test page with the original document.
6 Repeat step 4 and step 5 until the edges of the test page match those of the original document.
1 Press on the home screen Settlements > Equipment > Maintenance > Configuration menu > Scanner configuration > Manual scanner registration.
2 Press "Quick pressure" in the test menu Start.
3 Place the fast-pressure test page in the ADZ compartment.
4 Press on Registration ADZ front or Registration ADZ backside.

5 Press "Quick copy" in the test menu Start.
6 Compare the quick copy test page with the original document.
7 Repeat step 5 and step 6 until the edges of the test page match those of the original document.
Before contacting Customer Service, make sure you have the following information:
Go to http://support.lexmark.com For support by email or chat, or search the library for a solution with manuals, support documentation, drivers and other downloads.
Technical customer service over the phone is also available. In the U.S.A. or Canada, contact customer service at 1-800-539-6275. In other countries or regions, you can go to http://support.lexmark.com.
Troubleshooting 248

Update and Migrate 249
Hardware
CAUTION – ELECTRIC SHOCK HAZARD: If you want to access the control board after setting up the printer or install optional hardware or storage media, first turn off the printers and unplug the power cord from the outlet to avoid the risk of an electric shock. If other devices are connected to the printer, turn them off too and unplug all cables from the printers.
1 Turn off the printer.
2 Remove the power cord from the socket and subsequently from the printer.
3 Use a flat screwdriver, and open the cover of the control board.

Update and Migrate 250

4 Install all supported internal options. For more information, see the installation manual included with the option.
5 Close the cover.
6 Connect the power cord to the printer and then connect it to a socket.
7 Turn on the printer.
CAUTION – ELECTRIC SHOCK HAZARD: If you want to access the control board after setting up the printer or install optional hardware or storage media, first turn off the printers and unplug the power cord from the outlet to avoid the risk of an electric shock. If other devices are connected to the printer, turn them off too and unplug all cables from the printers.
1 Turn off the printer.
2 Remove the power cord from the socket and subsequently from the printer.
3 Use a flat screwdriver, and open the cover of the control board.

Update and Migrate 251
4 Take the memory card out of its packaging.
5 Insert the memory card so that it latches audibly.

6 Close the cover.
7 Connect the power cord to the printer and then connect it to a socket.
8 Turn on the printer.

Update and Migrate 252
CAUTION – ELECTRIC SHOCK HAZARD: If you want to access the control board after setting up the printer or install optional hardware or storage media, first turn off the printers and unplug the power cord from the outlet to avoid the risk of an electric shock. If other devices are connected to the printer, turn them off too and unplug all cables from the printers.
1 Turn off the printer.
2 Remove the power cord from the socket and subsequently from the printer.
3 Use a flat screwdriver, and open the cover of the control board.
4 Take the option card out of its packaging.
5 Slide the card in.


Update and Migrate 253
6 Close the cover.
7 Connect the power cord to the printer and then connect it to a socket.
8 Turn on the printer.
CAUTION – ELECTRIC SHOCK HAZARD: If you want to access the control board after setting up the printer or install optional hardware or storage media, first turn off the printers and unplug the power cord from the outlet to avoid the risk of an electric shock. If other devices are connected to the printer, turn them off too and unplug all cables from the printers.
1 Turn off the printer.
2 Remove the power cord from the socket and subsequently from the printer.
3 Use a flat screwdriver, and open the cover of the control board.
4 Take the hard drive out of the packaging.

Update and Migrate 254
5 Attach the hard drive and connect the disk cable to the control board.

6 Close the cover.
7 Connect the power cord to the printer and then connect it to a socket.
8 Turn on the printer.
CAUTION – ELECTRIC SHOCK HAZARD: If you want to access the control board after setting up the printer or install optional hardware or storage media, first turn off the printers and unplug the power cord from the outlet to avoid the risk of an electric shock. If other devices are connected to the printer, turn them off too and unplug all cables from the printers.
1 Turn off the printer and unplug the power cord from the socket.
2 Use a flat screwdriver, and open the cover of the control board.

Update and Migrate 255
3 Unpack the Internal Solutions Port (ISP) kit.


4 If necessary, remove the printer's hard drive.
2 Holding system 3 Cut-out screws

Update and Migrate 256
5 Then, put the mount into the board until it is audibly engaged.

6 Insert the ISP into the bracket.


Update and Migrate 257
7 If necessary, attach the hard drive to the ISP. a Remove the hard disk holder.

b Install the hard drive on the ISP.

Update and Migrate 258

8 Close the cover.
9 Connect the power cord to the socket and turn on the printer.
CAUTION – ELECTRIC SHOCK HAZARD: If you want to access the control board after setting up the printer or install optional hardware or storage media, first turn off the printers and unplug the power cord from the outlet to avoid the risk of an electric shock. If other devices are connected to the printer, turn them off too and unplug all cables from the printers.

Update and Migrate 259
1 Turn off the printer.
2 Remove the power cord from the socket and subsequently from the printer.
3 Take the optional compartment out of packaging and remove all packaging material.
4 Align the printer to the optional tray, and insert the printers with audible click.

5 Connect the power cord to the printer and then connect it to a socket.
6 Turn on the printer.
Add the tray in the printer driver to make it available for printing jobs. For more information, see "Add available options in the printer driver" on page 262.
CAUTION – ELECTRIC SHOCK HAZARD: If you want to access the control board after setting up the printer or install optional hardware or storage media, first turn off the printers and unplug the power cord from the outlet to avoid the risk of an electric shock. If other devices are connected to the printer, turn them off too and unplug all cables from the printers.

Update and Migrate 260
1 Turn off the printer.
2 Remove the power cord from the socket and subsequently from the printer.
3 Remove the compartment from packaging and remove all of the packing material.
4 Put the tray on the rolling shelf.

5 Align the printer on the tray, and insert the printers with audible click.

Update and Migrate 261

6 Connect the power cord to the printer and then connect it to a socket.
7 Turn on the printer.
Add the tray in the printer driver to make it available for printing jobs. For more information, see "Add available options in the printer driver" on page 262.

Update and Migrate 262
2 Run the installer and follow the instructions on your computer screen.
3 Add the printer for Macintosh users.
For Windows users
1 Open the printer folder.
3 Navigate to the "Configuration" tab, and select Update now – ask printers.
4 Apply the changes.
1 Use the System Settings in Apple's menu to navigate your printer, and select Options and consumables.
2 Navigate to the list of hardware options, and then add all installed options.
3 Apply the changes.
You can export your printer’s configuration settings to a text file, which can then be imported to apply the settings on other printers.
1 Open a web browser and enter the printer’s IP address in the address field.

Update and Migrate 263
2 Export or import a configuration file for one or more applications.
a Click on the Embedded Web Server Apps > and the application you are using Want to configure. b Click on it Exporting or Import.
a Click on the Embedded Web Server Exporting configuration or Importing configuration. b Then follow the instructions on screen.
Some applications require a minimum version of the device firmware to function properly.
More information about updating the device firmware can be obtained from your Lexmark merchant.
1 Click on the Embedded Web Server Settlements > Equipment > Firmware Update.
2 Navigate to the required flash file.
3 Apply the changes.

Product information
Product name:
Lexmark MB2770adwhe; Lex mark MX721ade, Lex Mark MX7721adhe; Mx722ade, MX722adhe); MX7525adve, LEXmark XM5365, LExmark Xm5370 MFPs
Type of equipment:
Models:
036, 037, 096, 336, 337, 388, 396, 836
The following section does not apply to countries where these provisions are incompatible with the law applicable therein: LEXMARK INTERNATIONAL, INC. PROVIDES THIS PUBLICATION WITHOUT DEFECT AND DOES NOT ASSUME ANY WARRANTY WHATSOEVER, EXPRESSLY OR IMPLICITLY, INCLUDING BUT NOT LIMITED TO THE LEGAL GUARANTEE OF MARKETABILITY OF A PRODUCT OR ITS SUITABILITY FOR ANY PARTICULAR PURPOSE. In some countries, the exclusion of express or tacit guarantees is not permitted in certain transactions. Therefore, this statement may not be valid for you.
This publication may contain technical inaccuracies or typographical errors. The information contained herein is periodically changed; these changes are included in higher versions. Improvements or changes to the described products or programs can be made at any time.
The references to products, programs and services contained in this software documentation do not mean that the manufacturer intends to make them available in all countries where such software documentation is offered. No reference to a product, program or service states or implies that only this product, programme or service may be used. Any product, program or service with the same features that does not violate any intellectual property restrictions may be used instead. When using products, programs and services other than those expressly recommended by the manufacturer, the user is responsible for assessing and testing their functionality.
Technical Support from Lexmark is available at http://support.lexmark.com.
Information about the Lexmark Privacy Policy for using this product can be found at www.lexmark.com/privacy.
Underground www.lexmark.com Get information about accessories and downloads.
© 2018 Lexmark International, Inc.
All rights reserved.
December 2018

Lexmark and the Lex mark logo are trademarks or registered trademark of Lex Mark International, Inc., registered in the United States and/or other countries.
Google Cloud Print and Google Chrome are trademarks of Google Inc. Android and Google Play are trademarks of Google LLC.
Macintosh, Mac, App Store and Safari are trademarks of Apple Inc. AirPrint and the AirPrint logo are trademarks of Apple, Inc.
Microsoft, Windows and Internet Explorer are registered trademarks or marks of the Microsoft group in the United States and other countries.
Mopria®, the Moprian® logo and the MoPria Alliance logo are registered trademarks of Mopriarian Alliance, Inc. in the United States and other countries. Unauthorised use is strictly prohibited.
PCL® is a registered trademark of Hewlett-Packard Company. PCL is the Hewlett-Packard Company's designation for a set of printer commands (language) and functions contained in the Printer Products. This printer was developed with regard to compatibility with the PCL language. The printer thus recognizes PCL commands used in various application programs and emulates the functions corresponding to the commands.
PostScript is a registered trademark of Adobe Systems Incorporated in the United States and/or other countries.
All other brands are the property of their respective owners.
All license notices for this product can be found in the CD:\NOTICES directory of installation software CD.
Modell 036, 037, 096, 336, 337, 388, 396, 836
Postal address Lexmark Deutschland GmbH
Post office 1560 63115 Dietzenbach
Addresse Lexmark Deutschland GmbH Max Planck Street 12 63128 Dietzenbach
Phone 0180 - 564 56 44 (product information)
Telephone 01805- 00 01 15 (Technical customer service)
E-mail [email protected]
The following measurements were carried out in accordance with ISO 7779 and reported according to ISO 9296.
Type of equipment 7464

Average sound pressure level within 1 metre in dBA
Printing on one side: 57 (MB2770, MX721, MX72, XM5365, XM535); 56 (MX725) Both sides: 56 (MS721, XM5465); 57 (MS2770 and MX732); 55 (MS2225)
Scan 56 (MB2770, MX721, MX7222, XM5365, XM535); 57 (MX725)
Copy 60 (MB2770, MX721, MX7222, XM5365, XM535); 59 (MX725)
Bereit 14 (MB2770, MX721, MX722, XM5365, XM5370); 28 (MX725)
Change of values reserved. Underground www.lexmark.com Get the current values.
The WEEE logo identifies certain recycling programs and processes for electronic products in countries of the European Union. We promote the recycling of our products.
For questions about recycling opportunities, visit the Lexmark website at www.lexmark.com the telephone number of your local sales office.
Do not dispose of the printer and consumables like normal household waste. Contact local authorities for information on disposal and recycling.
This symbol identifies parts that are sensitive to static charges. Touch the areas around these icons only after you have touched a metal object in a remote area to the symbol.
To prevent damage caused by electrostatic discharge when performing maintenance work, such as removing paper jams or replacing consumables, contact the

The printer's exposed metal frame before accessing or touching the interior of the printer, even if it does not display the icon.
All Lexmark products with the ENERGY STAR® icon on the product or start screen are certified and meet the Energy STAR requirements of the Environmental Protection Agency (EPA) in their configuration.
Operating temperature and relative humidity 10 to 32.2 °C and 15 to 80 % relative hose 15.3 to 32,2 ° C and 8 to 15 % relative air humide Maximum lamp temperature at humicity: 22.8 °C Long-term storage of printer/cassette/exposure unit1
Short-term shipment of printer/cassette/exposure unit
1 The shelf life of consumable materials is about 2 years. This information is based on storage in a standard office environment at 22 °C and 45 % humidity.
2 The wetting temperature is determined by the air temperature and relative humidity.
The printer is certified in the USA and complies with DHHS 21 CFR Chapter I requirements for Class I (1) laser products, but elsewhere it is certified as a class I laser product that meets the requirements of IEC 60825-1: 2014.
Laser products of Class I are not considered dangerous. The laser system and printer are designed so that under normal operating conditions, user maintenance or prescribed service conditions humans will not be exposed to laser radiation exceeding the values of Class I. The printer has a printing head unit that cannot be maintained and is equipped with a laser of the following specifications.
-40 bis 43,3°C

The following table shows the energy consumption of the product.
Mode Description Power consumption (Watt)
The product generates a printed output based on electronic input.
Einseitig: 800 (MX721, XM5365); 850 (MB2770, MX722, XM5370); 750 (MX725) Beidseitig: 580 (MX721, XM5365); 640 (MB2770, MX722, XM5370); 570 (MX725)
The product generates a printed output of original printed documents.
830 (MX721, XM5365); 890 (MB2770, MX722, XM5370)); 810 (MX725)
Scanning The product scans printed documents. 75 (MX721, XM5365); 73 (MB2770, MX722, XM5470); 158 (M×725)
Ready The product is waiting for a print job. Higher power consumption: 41.5 (MX721, XM5365); 42 (MB2770, MX722, XM 5370); 118 (Mx725) Lower power use: 31 (MV721, xM53 65); 32 (MB 2770, mX722 xM 53 70); 94 (mX725)
Energy saving mode The product is in a high
Energy saving mode.
Sleep mode The product is in a low energy savings mode.
From The product is connected to a power outlet, but the mains switch is off.
The electricity consumption listed in the previous table represents average time measurements. The spontaneous power consumption can be significantly higher than the average.
Change of values reserved. Underground www.lexmark.com Get the current values.
This product has an energy saving mode called sleeping. In sleep mode, energy is saved by reducing the amount of power consumed during prolonged inactivity. Sleep mode is automatically activated if the product has not been used for a specified period of time, also known as sleep time limit.
Factory sets the product sleep time limit as follows (in minutes): 15
The configuration menus can set the time limit for sleep mode to a value between 1 minute and 120 minutes. Setting the sleep time limit to a low value will reduce energy consumption, but it can increase product response times. At a high value for the time limit, although the reaction time is short, at the same time more energy is consumed.
0,2 · 0,2

This product has a very low power mode called sleep mode. In sleep mode, all other systems and devices are safely switched off.
Sleep mode may be activated by one of the following methods:
Factory sleep time lock for this product in all countries or regions. 3 days
The time the printer waits after an order is printed and before it goes to sleep mode can be set to a period between one hour and one month.
If this printer consumes a small amount of power even when turned off, you will need to unplug the plug from the socket in order to completely eliminate energy consumption.
Sometimes it is helpful to calculate the total power consumption of the product. Since the power consumption data are given in Watt units, calculating electricity consumption multiplies energy consumption by time spent on each mode. The total power consumption of the product is the sum of the energy consumption of each mode.
This section provides legal notices about products equipped with analog fax cards.
Lexmark Legal Notices Type/Model:
Use of this product in Germany
For this product, a German billing tone filter for count character transmission (Lexmark part number 80D1888) must be installed for each line via which time control clocks are transmitted in Germany. Time control clocks may not be available in analog lines in Germany. The subscriber can arrange for time control clocks to be provided or request the German network provider to deactivate them by telephone. As a rule, time control clocks are only provided if this is expressly desired by the subscriber during installation.
This section contains legal information that applies only to Wi-Fi models.
Information on whether your device is a WLAN model can be found at http://support.lexmark.com.

WLAN models may contain the following modular component(s):
The output current radiation of this device is well below the limits for radio frequency radiation set by FCC and other regulatory authorities. A minimum distance of 20 cm between the antenna and operators shall be maintained to meet FCC and other regulatory requirements for radio frequency radiation.
This printer complies with the protection provisions set out in EC Directive 2014/53/EU on the approximation and harmonisation of Member States’ legislation regarding radio equipment.
The manufacturer of this product is: Lexmark International, Inc., 740 West New Circle Road, Lexington, KY, 40550 USA. The authorised representative is: Lexmark International Technology Hungária Kft., 8 Lechner Ödön fasor, Millennium Tower III, 1095 Budapest, Hungary. A declaration of conformity with the requirements of the Directives shall be provided by an authorised representative or may be made available at: www.lexmark.com /en us/via/Regulatory-compliance/european-union-declaration-of-conformity.html are called up.
Conformity is indicated by the CE mark:
This radio equipment shall be used only indoors. Outdoor use is prohibited. This restriction applies to all countries listed in the table below:

AT BE BG CH CY CZ DE DK EE
EL ES FI FR HR HU IE IS IT
LI LT LU LV MT NL NO PL PT

RO SE SI SK TR United Kingdom
This radio equipment transmits in one of the following frequency ranges: 2,4 GHz (2.412 – 2.472 GHz in the EU) or 5 GHz (5.15 – 5.35 or 5.47 – 5.725 in the Union). The maximum e.i.r.p output power, including antenna gain, is ≤ 20 dBm for both ranges.
This product meets the protection requirements of EC Council Directives 2014/30/EU, 2014/35/EU and 2011/65/EU on approximation and harmonisation of Member States’ laws with regard to electromagnetic compatibility, safety of electrical components designed for use in specific voltage ranges as well as restrictions on the use of certain hazardous substances in electric and electronic equipment.
The manufacturer of this product is: Lexmark International, Inc., 740 West New Circle Road, Lexington, KY, 40550 USA. The authorised representative is: Lexmark International Technology Hungária Kft., 8 Lechner Ödön fasor, Millennium Tower III, 1095 Budapest, Hungary. A declaration of conformity with the requirements of the Directives shall be provided by an authorised representative or may be made available at: www.lexmark.com /en us/via/Regulatory-compliance/european-union-declaration-of-conformity.html are called up.
This product meets the limits of EN 55022 and EN55032 for Class A equipment, and safety requirements according to EN 60950-1 or EN 62368-1.
This product meets the emission limits of EN55022 and EN5 5032 for Class A equipment, and immunity requirements of standard EN53024. This product must not be used in residential areas.
This is a Class A device. In residential areas, this device can cause interference with radio and television reception. The user must take appropriate measures in this case.







Pages referenced in this manual — manufacturer, support and downloads.
Owners and our team usually reply within a day — and your question helps the next person too.
Be the first to ask — other owners or our team will answer.