
User Manual
Machine type(s):
Models:
676, 678, 679, 686


Safety information 7
Conventions
LET OP: Note indicates a potentially dangerous situation that can cause personal injury.
Examples of such warnings are:
PLEASE NOTE: RISK OF INJURY: Danger of injury.
NOTE: DANGER OF ELECTRIC SHOCKS: Risk of electric shock.
NOTE: HOT SURFACE: Risk of burning in contact.
NOTE: TILT RISK: - Smell danger.
PLEASE NOTE: RISK OF INJURY: To avoid the risk of electric shocks or fire, you need to connect the power cord directly to a grounded outlet close to the product and which is easily accessible.
PLEASE NOTE: RISK OF INJURY: Use only the power cord supplied with this product or a replacement component approved by the manufacturer to prevent fire or electric shocks.
PLEASE NOTE: RISK OF INJURY: You must not use this product with extension cords, plug boxes, distributors or UPS devices. The power capacity of this type of accessories can easily be exceeded by a laser printer, which can lead to poor printer performance, property damage or fire.
PLEASE NOTE: RISK OF INJURY: For this product, only use a Lexmark overvoltage protection that is correctly connected between the printer and the supplied power cord. Using non-Lexmark span protections can lead to poor printer performance, property damage or fire.
PLEASE NOTE: RISK OF INJURY: Use to reduce the risk of fire only a telecommunication cord (RJ-11) of 26 AWG or more if you connect this product to the public fixed telephone network. For users in Australia, the cord should be approved by the Australian communication and media authority.
NOTE: DANGER OF ELECTRIC SHOCKS: To avoid the risk of electric shocks, do not place or use this product near water or damp locations.
NOTE: DANGER OF ELECTRIC SHOCKS: To avoid the risk of electric shocks, you should not turn this product on during thunderstorm and do not connect electrical cables or power lines such as a fax cord, mains cable or telephone cable.

Safety information 8
PLEASE NOTE: RISK OF INJURY: You should not cut, rotate, tie, pinch or place heavy objects on the cord. Make sure that no abrasions can occur on the power cord or pressure is placed on the cable. Make sure the power cord doesn't get entangled between two objects, like a piece of furniture and a wall. If any of these things happen, there's a chance of fire or electric shocks. Check the power cord regularly for such problems. Pull the power cord plug out of the socket before checking the power cable.
NOTE: DANGER OF ELECTRIC SHOCKS: To avoid the risk of electric shocks, make sure that all external connections (such as Ethernet and telephone system connections) are correctly placed in the marked ports.
NOTE: DANGER OF ELECTRIC SHOCKS: If you want access to the controller card or install optional hardware or memory devices after setting up the printer, turn off the printer and pull the plug before continuing in order to avoid risk of electric shocks. If you have connected other devices to the printer, disable them and unplug the cables from the printer.
NOTE: DANGER OF ELECTRIC SHOCKS: Do not use the fax function during thunderstorms to prevent electric shock.
NOTE: DANGER OF ELECTRIC SHOCKS: To avoid the risk of electric shocks, pull the power cord plug out and unplug all cables connected to the printer before cleaning the outside of the printer.
PLEASE NOTE: RISK OF INJURY: If the printer weighs more than 18 kg (40 lb), it must be moved by two or more trained staff.
PLEASE NOTE: RISK OF INJURY: Follow these guidelines when moving the printer to prevent injury or damage of your printer:

Safety information 9
NOTE: TILT RISK: When installing one or more options on your printer or MFP, a chassis with swivel wheels, printer cabinet or other device may be required to prevent instability that can cause injury. More information on supported layouts can be found at www.lexmark.com/multifunctionprinters.
NOTE: TILT RISK: Make sure to place paper separately in each tray to prevent equipment instability. Keep all other drawers closed until you need them.
NOTE: HOT SURFACE: The inside of the printer can be hot. To avoid injury, you should cool a hot surface before touching it.
PLEASE NOTE: DANGER OF TROUBLE: Be careful when using parts with this label to avoid getting stuck between moving parts. The danger of a problem can occur near moving parts, such as gears, doors, drawers and covers.
PLEASE NOTE: RISK OF INJURY: This product uses a laser. The use of other modes, methods or procedures than those mentioned in the User's Manual may result in exposure to hazardous radiation.
PLEASE NOTE: RISK OF INJURY: The lithium battery in this product should not be replaced. If the lithium battery is not properly replaced, there is an explosion risk. A lithium battery shall not be recharged, disassembled or incinerated. Dispose of used lithium batteries as instructed by the manufacturer and keep in mind local regulations.
This product has been developed, tested and approved together with specific components of the manufacturer according to strict safety standards applicable worldwide. The safety features of certain components are not always clearly visible. The manufacturer shall not be responsible for the use of other replacement parts.
Have maintenance and repair operations not described in the user documentation carried out by a service representative.
This product uses a printing process that heats the print material. The heat can cause the printing material to release certain substances. Study the section in the operating instructions that discuss guidelines for selecting printing materials to prevent harmful emissions.
This product produces small amounts of ozone during normal use and may be equipped with a filter to keep ozone concentrations well below the recommended exposure limits. To prevent high ozone concentrations during intensive use, place this product in a well ventilated area and replace the ozone and exhaust filters if specified in the maintenance instructions of the product. If filters are not referred to in the maintenance instructions of the product, this product does not contain any filters that need to be replaced.
KEEP THESE INSTRUCTIONS.

Dealing with the printer 10
Find information about the printer

Dealing with the printer 11

PLEASE NOTE: RISK OF INJURY: To avoid the risk of electric shocks or fire, you need to connect the power cord directly to a grounded outlet close to the product and which is easily accessible.

Dealing with the printer 12


Dealing with the printer 13
NOTE: TILT RISK: When installing one or more options on your printer or MFP, a chassis with swivel wheels, printer cabinet or other device may be required to prevent instability that can cause injury. More information on supported layouts can be found at www.lexmark.com/multifunctionprinters.
NOTE: TILT RISK: Make sure to place paper separately in each tray to prevent equipment instability. Keep all other drawers closed until you need them.
You can customize the printer by adding optional drawers for 250 or 550 sheets. See 'Install optional loading' on page 241 for more information.

2 Automatic document input (ADI)
5 Access valve of the controller card
6 Standard drawer for 550 sheets
7 Optional tray for 250 or 550 sheets

Dealing with the printer 14
NOTE: DANGER OF ELECTRIC SHOCKS: Do not turn this product on during thunderstorm or make electrical or wired connections, such as faxes, power cords or telephone cables, to prevent electric shocks.
PLEASE NOTE: RISK OF INJURY: To avoid the risk of electric shocks or fire, you need to connect the power cord directly to a grounded outlet close to the product and which is easily accessible.
PLEASE NOTE: RISK OF INJURY: Use only the power cord supplied with this product or a replacement component approved by the manufacturer to prevent fire or electric shocks.
PLEASE NOTE: RISK OF INJURY: Use to reduce the risk of fire only a telecommunication cord (RJ-11) of 26 AWG or more if you connect this product to the public fixed telephone network. For users in Australia, the cord should be approved by the Australian communication and media authority.

1 Power cord connection Connect the printer to an outlet.
2 Ethernet port Connect the printer to an Etherenet network.
3 LINE port Connect the printer to an active phone line via a standard wall connection (RJ-11), DSL filter, VoIP adapter or another adapter that allows you to send and receive faxes.
4 USB port Connect a keyboard or compatible option.
5 USB printer port Connect the printer to your computer.
Front Component

Dealing with the printer 15

2 Start screen (button) Go to the start screen.
3 Toggle whether to turn on or off the printer.
4 Numeric keypad Enters numbers or symbols in an input field.
5 Pause button This will add a dial cut to a fax number.
6 Start a task depending on the selected mode.
7 Button Clear/Reset All
This configures the setting of a function, such as copying, faxing or scanning for factory values.
8 Stop or Cancel button Stop the current job.
9 Backspace button Move the cursor back and remove a character in an input field.
10 Check the printer status.
11 Adjust volume buttons Loudspeaker volume.
12 Speaker port Attach a speaker.
Front Component

Dealing with the printer 16
The printer is disabled or the printer's slumber mode is active.
Blue The printer is ready or processed data.
Red The printer requires intervention by the user.
The printer is disabled or processed data.
Brandt orange The printer is in sleep mode.
Flick orange The slumber mode of the printer is active.
Printer status indicator lamp · Light on-off button Printer status

Set and use applications of the home screen 17

1 Copy Copies.
2 Send emails.
3 Settings Open the printer menus.
4 Faxes Send Faxes.
5 Manage a list of contacts that other applications on the printer can access.
8 Queue Display all current print jobs.
Touch Before

Set and use applications from the home screen 18
9 Show waiting tasks Print jobs queued in printer memory.
10 Shortcut Manager Order all shortcuts.
11 App profiles Access to application profiles.
12 Scan profiles scan documents and store them directly on the computer.
13 Scan FTP Documents and store them directly on an FTP server.
14 Bookmarks Order all bookmarks.
15 Change language Change the language on the screen.
1 Open a web browser and type the printer IP address in the address bar.
2 Click on Institutions > Device > Visible icons on the home screen.
3 Select the icons you want to display on the home screen.
4 Apply the changes.
1 Open a web browser and type the printer IP address in the address bar.
2 Click on Apps > Copying only > Configure.
3 Apply the changes.
Touch Before

Set and use applications of the home screen 19
1 Hit in the home screen Shortcut Center On.
2 Select a printer function and then hit Create shortcut On.
3 Configure the settings and then hit Save On.
4 Type a unique name for the shortcut.
5 Touch OK On.
The application automatically generates a unique shortcut number. Press # and then press the shortcut number to open the shortlink.
Before using the application, do:
1 From the Images Screen Saver and slideshow section you can add, edit or delete an image.
2 Apply the changes.
1 Touch Change Background On the start screen.
2 Select the desired image.
3 Apply the changes.
1 Place a flash drive in the USB port.
2 Hit in the Home screen Slide Show On.
Images appear in alphabetical order.

Set and use applications from the home screen 20
1 Hit in the Home screen Eco Settings On.
2 Configure the Ecomode or Planning current mode.
3 Apply the changes.
1 Touch Customer support On the start screen.
2 Print the information or send it by e-mail.
You may need to have administrative rights in order to access the application.
1 Open a web browser and type the printer IP address in the address bar.
2 Click on Apps > QR Code Generator > Configure.
4 Apply the changes.
1 Hit in the home screen Scan Center On.
2 Select and create a destination, then configure the settings.

Set and use applications from the home screen 21
3 Apply the changes.
You may need to have administrative rights in order to access the application.
1 Open a web browser and type the printer IP address in the address bar.
2 Click on Apps > Device quota > Configure.
3 Add or edit a user from the User Accounts section and then set up the user quota.
4 Apply the changes.
We recommend that you sign in to the printer before creating a profile. For the activation of a login method, see the Embedded Web Server - Security Admin Guide.
1 Hit in the home screen Cloud Connector On.
2 Select a cloud service provider.
3 Tap Create a profile or .
4 Type a unique profile name.
5 Enter a PIN if necessary.
6 Tap Create and write down the authorization code.
7 Open a web browser and go to https://lexmark.cloud-connect.co.
8 Click on Next and then accept the terms of use.
9 Enter the authorization code and click Connect.

Set and use applications from the home screen 22
10 Sign in to your cloud service provider account.
11 Granting permissions.
Use bookmarks to print commonly used documents stored on servers or the web.
1 Open a web browser and type the printer IP address in the address bar.
2 Click Settings Bookmark Settings > Add Bookmark, and then type a unique name for the bookmark.
Limit access to the bookmark by entering a PIN.
4 Click on Save.
1 Open a web browser and type the printer IP address in the address bar.

Set and use applications from the home screen 23
2 Click Settings Bookmark Settings > Add Folder, and then type a unique name for the folder.
3 Click on Save.
1 Open a web browser and type the printer IP address in the address bar.
2 Click on Address Book.
3 Add a contact from the Contacts section.
4 If necessary, specify a method of notification for accessing the application.
5 Apply the changes.
1 Open a web browser and type the printer IP address in the address bar.
2 Click on Address Book.

Set and use applications from the home screen 24
3 Add a name of a group from the Contact Groups section.
4 Apply the changes.
1 Open a web browser and type the printer IP address in the address bar.
2 Click on Address Book.
4 Apply the changes.
1 Open a web browser and type the printer IP address in the address bar.
2 Click on Address Book.

Set and use accessibility functions 25
1 Hold the control panel 5-key pressed until you hear a spoken message.
2 Select the magnification mode.
3 Select OK.
For more information about the navigation through a larger screen, see 'Navigate on screen with gestures' on page 25.
1 Keep the 5-key pressed until you hear a spoken message.
2 Select OK.
1 Keep the 5-key pressed until you hear a spoken message.
2 Press Tab to navigate the focus cursor to the O.R. button and then press Enter.
Twice tap Select an option or item on the screen.
Three taps Zoom in or zoom out on text and images.
Gebar Function

Set and use accessibility functions 26
Move to the right or down To the next item on the screen.
Move to the left or upstairs Go to the previous item on the screen.
Pan To go to parts of the zoomed-in image that fall outside the screen's limits.
To top and left, close an application and return to the home screen.
Up and down
Repeat a spoken text.
1 Select from the home screen Institutions > Device > Accessibility > Speech speed.
2 Select the speech speed.
Perform one or more of the following actions:
1 Select from the home screen Institutions > Device > Accessibility > Spoken passwords/pin codes.
2 Turn on the option.
Gebar Function

Paper and special printing material places 27
Set the size and type of paper for special material
The drawers automatically detect the size of normal paper. For special materials such as labels, cardboard or envelopes do the following:
1 In the start screen, browse for:
Institutions > Paper > Load Configuration > Paper Size/Species > select a paper source
2 Set the size and type of paper for the special material.
1 From the start screen, go to Institutions > Paper > Media Configuration > Universal Setting.
2 Configure the settings.
NOTE: TILT RISK: Make sure to place paper separately in each tray to prevent equipment instability. Keep all other drawers closed until you need them.
1 Remove the drawer.


Paper and special printing materials 28
2 Set the paper guides to the size of your paper you want to place.

3 Bend the paper, fan it out and align the edges before inserting it into the printer.

4 Place the stack of paper with the print side down and make sure that the side guides are firmly against the paper.


Paper and special printing material places 29
5 Put the drawer back.
If necessary, set the paper size and type of paper via the control panel on the basis of the paper placed.
1 Open the multifunction input.

2 Set the guide to the paper size you want to place.

3 Bend the paper, fan it out and align the edges before inserting it into the printer.

Place paper and special printing material 30
4 Place paper with the print side to top in the printer.
5 Set the paper size and type of paper on the control panel.
1 Open a web browser and type the printer IP address in the address bar.
2 Click on Institutions > Paper > Load Configuration.
3 Set a paper size and type of paper that match the drawers you want to link.
4 Save the settings.
5 Click on Institutions > Device > Maintenance > Configuration Menu > Load Configuration.
6 Set the load link Automatic.
7 Save the settings.
To disconnect loading, make sure there are no two drawers with the same paper size or type of paper settings.

Supported paper formats

210 x 148 mm (8.3 x 5.8 inches)
105 x 148 mm (4.7 x 5.8 inches)
* This paper format is not supported in the optional tray.
Paper support 31


Universal From 76.2 x 127 mm to 216 x 356 mm
(3 x 5 inches to 8.5 x 14 inches)
162 x 229 mm (6.4 x 9 inches)
From 76.2 x 127 mm to 216 x 356 mm
(3 x 5 inches to 8.5 x 14 inches)
* This paper format is not supported in the optional tray.
Paper support 32


1 The printer supports occasional use of single sided paper labels designed for laser printers. You are advised not to print more than 20 pages of paper labels per month. Vinyleti-kets, labels for pharmacies and double sided labels are not supported.
2 Bank note and heavy paper are supported in double-sided mode up to a paper weight of 90 g/m2.

Paper support 33

Print from a computer
1 Open the Print dialog from the document you want to print.
2 Adjust the settings if necessary.
3 Print the document.
LexmarkTM Mobile Print allows you to send documents and images directly to a supported Lex mark printer.
1 Open the document and send or share it to Lexmark Mobile Print.
2 Select a printer.
3 Print the document.
Google Cloud PrintTM is a mobile printing solution that allows you to print on printers compatible with Googo Cloud printer using enabled applications on mobile devices.
1 Launch a enabled application from the home screen of your mobile device.
2 Tap Print and select a printer.
3 Print the document.
Mopria® Print Service is a mobile printing solution intended for AndroidTM mobile devices
4.4 or later. You can directly print on any printer that is compatible with Mopra.
1 Launch a compatible application from the home screen of your mobile device.
2 Tap Print and select the printer.
3 Send the print job.
Print 34

AirPrint is a mobile printing solution that allows you to print directly from Apple devices on printers compatible with AirPrint.
1 Launch a compatible application from the home screen of your mobile device.
2 Select an item to print and then tap the Share icon.
3 Tap Print and select the printer.
4 Send the print job.
1 Place the flash drive in the printer.

2 On the display, touch the document you want to print.
Configure the other print settings if necessary.
3 Send the print job.
To print another document, hit USB drive On.
Print 35


– The printer supports high-speed USB flash drives with fullspeed standard. – USB flash drives must support the FAT (File Allocation Tables) system.
Print 36 · Documents

1 Browse the control panel to:
Institutions > Security > Print Configuration confidentially
2 Configure the settings.
Max. invalid PIN Set how often an invalid PING code can be entered.
Set a time-out for confidential printing tasks.
Time-limit for repeated tasks
Set the time limit for repeated printing tasks.
Time-limit for audited tasks
Set the time limit for printing one copy before the user prints the other copies.
Time-limit for reserved tasks
Set a time-out for saving print jobs.
Required queue all tasks
Set the printer to queue all print jobs.
Set the printer to print all documents with the same file name.
1 Open the document you want and click Stock > Print.
2 Click on Properties, Preferences, Options or Set.
3 Click on Print and Hold (Print and wait tasks).
4 Select Use print and wait and then assign a username.
5 Select the type of print job (Confidential, Repeat, Reserved or Controlled).
If the print job is confidential and enter a four-digit PIN.
6 Click on OK or Print.
Print 37 · Use For · Save duplicate documents

1 Open the document you want and click Archive > Print.
If necessary, click on the triangle to display more options.
2 In the Print Options or menu select Number and Pages option Forwarding tasks.
3 Select the type of print job (Confidential, Repeat, Reserved or Controlled).
If the print job is confidential, assign a username and enter a four digit PIN.
4 Click on OK or Print.
1 Hit in the home screen Cloud Connector On.
2 Select a cloud service provider and choose a profile.
3 Select a file.
4 Adjust the settings if necessary.
5 Touch Print On.
1 From the start screen, go to Institutions > Reports > Print > Print fonts.
2 Touch PCL fonts or PostScript Fonts On.
Print 38

Go from Home screen to Institutions > Reports > Print > Print Directory.
1 Touch Queue On the start screen.
2 Select the task you want to cancel.
2 Select the task you want to cancel.
Print 39

Copying 40
Use automatic document input and glass plate
Automatic Document Input (ADF) Glass Sheet


1 Place an original document in the ADF drawer or on the glass plate.
2 Hit in the Home screen Copy specify the number of copies.
Adjust the copying settings if necessary.
3 Copy the document.
1 Place a picture on the glass plate.
2 In the start screen, browse for:
Copy > Contents > Content type > Photo
3 In the Content Source menu, select the setting that best describes the source of content in the original photo.
4 Copy the photo.

Copying 41
1 Place an original document in the ADF drawer or on the glass plate.
2 Hit in the Home screen Copy > Copying to > select the format of the original document.
3 Touch Copy To on and then select the source of paper in which the letter paper is placed.
If you insert the stationery into the multifunctional input, browse to:
Copy To > Multifunction input > select a paper format > Letter paper
4 Copy the document.
1 Place an original document in the ADF drawer or on the glass plate.
2 Hit in the Home screen Copy > Paper Settings On.
3 Adjust the settings.
4 Copy the document.
1 Place an original document in the ADF drawer or on the glass plate.
2 In the start screen, browse for:
Copy > Scale > specify a value of the scale
3 Copy the document.
1 Place an original document in the ADF drawer or on the glass plate.
2 Tap from the start screen Copy > Sort > Aan [1,2,1,2,1,2].
3 Copy the document.
1 Place an original document in the ADF drawer or on the glass plate.
2 Hit in the Home screen Copy > Separation sheets On.
3 Adjust the settings.
4 Send the copy job.

Copying 42
1 Place an original document in the ADF drawer or on the glass plate.
2 Hit in the Home screen Copy > Pages per side On.
3 Adjust the settings.
4 Copy the document.
1 Open a web browser and type the printer IP address in the address bar.
2 Click on Shortcuts > Create shortcut.
3 Select Copy in the Shortcut Type menu and then configure the settings.
4 Apply the changes.

Use automatic document input and glass plate
Automatic Document Input (ADF) Glass Sheet
1 Open a web browser and type the printer IP address in the address bar.
2 Click on Institutions > Email > Configure Mail.
3 Configure the settings.
4 Apply the changes.
1 Open a web browser and type the printer IP address in the address bar.
Email 43

2 Click on Institutions > Email.
3 Enter the necessary data.
4 Apply the changes.
1 Place an original document in the ADF drawer or on the glass plate.
2 Hit in the Home screen Email enter and enter the required data.
3 If necessary, configure the file type settings for dispatch.
4 Send the e-mail.
1 Press the control panel # and enter the shortcut number with the keypad.
2 Send the e-mail.
1 Open a web browser and type the printer IP address in the address bar.
2 Click on Shortcuts > Create shortcut.
3 Select Email in the Shortcut Type menu and then configure the settings.
4 Apply the changes.
Email 44

Setup printer for faxing

1 Hit in the home screen Institutions > Device > Preferences > Run initial setup On.
2 Disable the printer and turn on the printer after about ten seconds.
3 Select in the screen before you start Change the settings and continue wizard.
4 Enter the required information in the Setup Email/Faxserver screen.
5 Finish the set-up.
NOTE: DANGER OF ELECTRIC SHOCKS: Do not turn this product on during thunderstorm or make electrical or wired connections, such as faxes, power cords or telephone cables, to prevent electric shocks.
Fax 45

NOTE: DANGER OF ELECTRIC SHOCKS: Do not use the fax function during thunderstorms to prevent electric shock.
PLEASE NOTE: RISK OF INJURY: Use to reduce the risk of fire only a telecommunication cord (RJ-11) of 26 AWG or more if you connect this product to the public fixed telephone network. For users in Australia, the cord should be approved by the Australian communication and media authority.

1 Connect one end of the phone cable to the printer's line port.
2 Connect the other end of the cable to a working analogue wall socket.
Fax 46


1 Connect one end of the phone cable to the printer's line port.
2 Connect the other end of the cable to a working analogue wall socket.
Faxes 47

Setting up the fax in countries or regions with different telephone wall sockets and plugs
NOTE: DANGER OF ELECTRIC SHOCKS: Do not turn this product on during thunderstorm or make electrical or wired connections, such as faxes, power cords or telephone cables, to prevent electric shocks.
NOTE: DANGER OF ELECTRIC SHOCKS: Do not use the fax function during thunderstorms to prevent electric shock.
PLEASE NOTE: RISK OF INJURY: Use to reduce the risk of fire only a telecommunication cord (RJ-11) of 26 AWG or more if you connect this product to the public fixed telephone network. For users in Australia, the cord should be approved by the Australian communication and media authority.
The standard wall connection in most countries is RJ11. When the wall socket or equipment in your building is not compatible with this type of connection, you use a telephone adapter. If no adapter is supplied to the printer in your country or region, you can purchase it separately.
An adapter plug may be installed in the printer's telephone port. Do not remove the adapter plug from the printer's phone port if you connect to a serial or cascade-switched telephone system.

Fax 48 · Article name Article number · Lexmark adapter plug 40X8519


1 Connect one end of the phone cable to the printer's line port.
2 Connect the other end of the cable to the RJ11 adapter and then connect the adapter to the wall connection.
3 If you want to connect another device with a non-RJ11 connection to this wall socket, you need to connect it directly to the phone adapter.
Fax 49

The German wall connection has two types of gates. The N-ports are for fax machines, modems and answering devices. The F-port is for phones. Connect the printer to one of the N ports.

1 Connect one end of the phone cable to the printer's line port.
2 Connect the other end of the cable to the RJ11 adapter and then connect the adapter to an N-port.
3 If you want to connect a phone and an answering machine to the same wall connection, you need to plug in your devices as indicated.
A specific call signal allows you to use multiple phone numbers on one telephone line. Each phone number has been assigned a different call signal.
1 Hit in the home screen Institutions > Fax > Analog Fax Settings > Fax reception settings > Admin controls > Reply After On.
2 Select the bell signal.
Fax 50

3 Apply the changes.
1 Hit in the home screen Institutions > Device >Preferences > Date and time > Configure On.
2 Configure the settings.
1 Hit in the home screen Institutions > Device >Preferences > Date and time > Configure On.
2 Select from the Timezone menu Custom.
3 Configure the settings.
Automatic Document Input (ADF) Glass Sheet
1 Place the original document in the ADF drawer or on the glass plate.
2 Hit in the Home screen Fax enter and submit the necessary information.
3 Configure the other fax settings if necessary.
4 Send the fax job.
Fax 51

1 Open the document you want and click Stock > Print.
2 Select the printer and then click Properties, Preferences, Options or Set.
3 Click on Fax > Enable Fax and then enter the number of the receiver.
4 Configure the other fax settings if necessary.
5 Send the fax job.
1 Open the document you want and click Archive > Print.
2 Select the printer and enter the number of the receiver.
3 Configure the other fax settings if necessary.
4 Send the fax job.
1 Place the original document in the ADF drawer or on the glass plate.
2 In the start screen, browse for:
Fax > To > Enter the fax number > Done
3 Tap Sending time, configure the settings and then tap Done.
4 Send the fax.
1 Open a web browser and type the printer IP address in the address bar.
2 Click on Shortcuts > Create shortcut.
3 Select Fax in the Shortcut Type menu and then configure the settings.
4 Apply the changes.
Fax 52

1 Place an original document in the ADF drawer or on the glass plate.
2 Hit in the Home screen Fax enter and submit the necessary information.
3 Select a setting from the Resolution menu.
4 Fax the document.
1 Place an original document in the ADF drawer or on the glass plate.
2 Hit in the Home screen Fax enter and submit the necessary information.
3 Adjust the intensity setting.
4 Send the fax job.
1 Open a web browser and type the printer IP address in the address bar.
2 Click on Institutions > Reports > Fax.
3 Click on Fax Task Log or on Choose Log Fax Numbers.
1 Hit in the Home screen Institutions > Fax > Analog Fax Settings > Fax reception settings > Management Settings > Block Fax Unnamed On.
2 Apply the changes.
1 Hit in the Home screen Institutions > Fax > Analog Fax Settings > Fax reception settings > Fax queue On.
2 Select a mode.
Faxes 53

1 Hit in the Home screen Institutions > Fax > Analog Fax Settings > Fax Receiving Institutions > Management Settings On.
2 Configure the settings Forward Fax, Forward to and Quick Link Forward to.
3 Apply the changes.
Faxes 54

Scanning 55
Use automatic document input and glass plate
Automatic Document Input (ADF) Glass Sheet
1 Place the original document in the ADF drawer or on the glass plate.
2 Hit in the Home screen FTP enter and submit the necessary information.
3 Configure the other FTP settings if necessary.
4 Send the FTP task.
1 Hit in the Home screen FTP On.
2 Enter the address of the FTP server and touch.
3 Enter a shortcut name.
4 Apply the changes.

Scanning 56
1 Place an original document in the ADF drawer or on the glass plate.
2 Place the flash drive in the printer.
3 Touch Scan to USB change the institutions if necessary.
4 Scan the document.

Scanning 57
1 Place an original document in the ADF drawer or on the glass plate.
2 Hit in the Home screen Scan profiles > Scan to Computer On.
3 Select the scan profile where you want to save the document.
1 Place the document in the ADF drawer or on the scanner glass plate.
2 Hit in the Home screen Cloud Connector On.
3 Select a cloud service provider and then select a profile.
4 Select a folder if necessary.
5 Touch Scan On.
6 Adjust the scanning settings if necessary.
7 Touch Scan On.

Copy Default Copy Settings · Configure FTP FTP

Select the language of the text on the display.
Specifies the country or region in which the printer is set to work.
[List of countries or regions]
Run the installation wizard.
Select a language as keyboard type.
Specify what information is displayed in the home screen.
View Text 1 [IP address*] Display Text 2 [Date/Time*] Custom text 1 Custom Text 2
Adjust the time and date of the printer.
Current date and time Manual Date and Time Set Date notation [MM-DD-YYYY*] Time format [12 hours AM/PM*] time zone [GMT*]

Configure the settings for Network Time Protocol (NTP).
Enable NTP [To*] NTP Server Verification
This will specify the size units for paper formats.
U.S.* Metric
20-100% (100*) Adjust display brightness.
Enable access to the flash drive.
This will specify whether the background of an image can be removed.
This scans multiple tasks to one file.
Scan single page via flatbed
Set that one page may be copied at a time via the glass plate.
This enables audio feedback to be enabled for printing, panel interactions, paper loaded instructions and error messages.
This adjusts the volume of printer speakers.
10-300 (60*) Set the inactivity time in seconds before the screen displays the start screen or before the printer automatically unsubscribes a user.
Connect to an external VNC client (Virtual Network Computing) to run the remote control panel.

Set the authentication type when accessing the VNC client server.
Set the indicator light to light if a printer error occurs.
Enable a sound when inserting paper into the ADF.
Set the number of times when the alarm is played when the user has to intervene.
From One Time* Continuous
Display the estimated status of the printer uploads.
Show estimates* Do not show estimates
This sets the unit that the printer uses to estimate supply consumption and activate custom notifications when intervention is required by the user.
Set the number of times that alarm goes off when toner cartridge is almost empty.
Out* Once Continuous
This configures the notification settings that indicate when user intervention is required.
Custom supply notifications
Settings for mail notifications Set the printer to send an email message to a list of contacts when the printer requires action from the user.
Set that the printer ejects blank pages or partially printed pages automatically after a blocked page has been removed.

Let the printer continue processing or printing a task automatically after certain types of intervention have been resolved.
Set the printer to restart if an error occurs.
Restart at inactive mode Always restart* Never restart
This will set the number of times that the printer automatically restarts.
Auto Restart Limit
Set the number of seconds before automatically restarting the printer.
Window Auto Restart
Show read-only information about restart the counter.
Teller Auto Restart
Reset the values of the Teller Automatically restart.
Teller autom. rew start up rust.
Set the printer to display a message when a short paper error occurs.
Show paper error too short
Set the printer to send the entire page to memory before printing the task.
Restore content after failure
Set the printer to reprint pages that have been blocked.
Restore content after failure
Specify how to restart a scan job after solving a paper failure.

Allow printing when the display is disabled.
Print while the display is off
Enable display while printing Print while the display is off*
Set after how much time to be inactive the printer switches to sleep mode.
This will set up the printer after how much time it switches to slumber mode.
Disabled 1 hour 2 hours 3 hours 6 hours 1 day 2 days 3 days* 1 week 2 weeks 1 month
Set the printer to slumber mode even if there is an active Ethernet connection.
Snooze timeout on connection
Do not enable sleep mode*
Minimize the use of energy, paper or special printing material.
Out* Energy Energy/paper Paper
Schedule when the printer's sleep or slumber mode is activated.

Information sent to Lexmark
Send information about printer usage and performance to Lexmark.
Save Use of supplies and pages (anonymous) Device performance (anonimal) None of the above*
0-5 (0*) Set in seconds how long the printer ignores double keystrokes on a locked keyboard.
Time until key is repeated
0.25-5 (1*) Set the initial delay for repeated keystroke in seconds.
Set the number of attacks per second for a repeated keystroke.
Allow the user to stay in the same location and reset the Screen timeout when it has expired, instead of returning to the start screen.
1-10 (5*) Adjust the volume of headphones.
Shape the spoken guidance when a headphone is connected
Enable the spoken guidance when headphones are connected to the printer.
Set the printer to voiced passwords or personal ID numbers.

Set the speech speed of spoken guidance.
Very slow Slow Normal* Fast Faster Very fast Superfast Extremely fast Fastest
Restore the printer's default settings.
Restore All Settings Recover Printer settings Restore Network Settings Fax Settings Restoring App Settings
Configuration Menu
Change the printer's USB driver mode to improve compatibility with a PC.
Set up whether the USB device driver is listed as a single-fold USB unit (single interface) or as a configured USB apparatus (multiple interfaces).
Set the USB port to run at full speed and disable its high-speed functions.
Set the printer to have the same settings for paper type and paper size.

The message Input tray placed Show.
Show message entry tray placed
Out Only for Unknown Formats* Always Forward
Specify the page's print position while placing A5 paper.
Short side* Long side
Set the paper source to be filled in when a message is displayed to place paper or envelopes.
Auto* Multifunction input Manual paper input
Auto* Multifunction input Manual Envelope input
Set the printer to resolve notifications about changing paper or envelopes.
User Questions* Continue Using Current
Print reports about the printer's menu settings, status and buzz log.
Page Menu Settings Event Log Summary event log
Consumption and counters of supplies
Reset the supply page counter or display the total number of pages printed.
Reset the history of supply usage Teller black cartridge Teller Black image processing unit Reset maintenance counter
Set the printer to recognize and use the PPDS data stream.
Set the fax chip to enable low-energy mode when the printer determines that this is possible.
Fax bottom. low energy
Disable Sleep Allow Auto*

Set a value for the text size under which high frequency displays are used when printing font data.
Sharply let. type
For example, if the value is 24, all letter types of 24 point or less high frequency screens are used.
Adjust the toner density for printing or copying documents.
Set the printer to operation in Silent mode.
Access the control panel menus.
Set the printer to work in a special mode, which tries to provide as much functionality as possible despite known problems.
If this option is enabled and the duplex engine does not work, for example, the printer will print one-sidedly even if double-sided printing is enabled for that task.
Set the memory assignment for storing copy tasks.
20 MB* 30 MB 50 MB 80 MB 100 MB
Clear user-defined strings for default or alternative custom messages.
Clear messages that are installed externally.
Clear all remotely installed messages
Show existing error messages on screen after the printer remains inactive on the start screen during time of setting Time-out.
Fault screens autom. show
Set the printer to use the Print Mode setting in the Copy menu when sending quick copy tasks.
Copy fast path orientation

Register the flatbed and ADF manually after replacing the ADF, glass plate or controller card.
Registration ADF front registration ADF rear Flatbed registration
Set the size, in millimetres, of the non-printable area around an ADF or flatbed scan job.
0-6 (3*) Clear Edge FB
Disable the scanner if it doesn't work properly.
Enabled* Disabled ADF disabled
Print a test page that displays the scanner margin settings.
Determining the byte order of scan output with TIFF formatting.
Set the value of the RowsPerStrip tag from scan output with TIFF formatting.
Exact RowsPerStrip for Tiff
Show when the printer memory or hard drive was last cleaned up.
Memory last cleaned Fixed disk last cleaned
Clear all the settings and applications stored in printer memory and on printer hard drive.
Clean all data in non-volatile memory Clear All Data on Hard Drive Clear All Printer and Network Settings

Visible icons on the home screen
Specify which icons are displayed in the home screen.
Copy Email Faxes Status/Supplies Queue Change Language Address Bookmarks Waiting Tasks USB FTP Scan Profiles App Profiles Scan Center
Feature tag Displays the printer serial number.
Printer Location Identifys the printer's location. The maximum length is 63 characters.
Contact Adjust the printer name. The maximum length is 63 characters.
Export configuration file to USB Export configuration files to a flash drive.
Export Compressed Log Files to USB
Export compressed log files to a flash drive.
This will determine whether to print on one side or two sides of the paper.
Determine which side of the paper (long side or short side) is bound when printing double-sided.
Long side* Short side

Blank pages prints that are included in a printing job.
This will stack the pages of a print job in order if you print multiple copies of the task.
Uit [1,1,1,2,2,2]* Aan [1,2,1,2,1,2]
Insert empty separation sheets while printing.
None* Between copies Between tasks Between pages
Specify the source of paper for the separation sheet.
Tray [x] (1*) Multifunction input
Print multiple page binders on one side of the paper.
From* 2 pages per side 3 pages per silk 4 pages per page 6 pages per face 9 pages per sides 12 pages per lace 16 pages per edge
Pages by side - sorting
Specify multiple page positioning when using Pages per side.
Horizontal* Reverse horizon. Vertical Conversely Vertical
Pages per side - Print Mode
Specify the print position of a multi-page document when using Pages per side.
Pages per side - border
Print a border around each page when using Pages per side.
1-9999 (1*) This gives the number of copies for individual printing tasks.
Set the printable area of a sheet of paper.
Normal* Fit on page Whole page

Specify the nonposition for all print jobs.
Out* 1 staple, upper left 2 staples, lower left 1 staple and upper right 2 staple, higher left 1 stab, lower right 2 Stabs
Determine whether the nonfinisher is functioning properly.
Apply perforations to the side of the printed output.
Set the printout perforation mode.
2 perforations 3 perforations 4 perforations
Move the output of each print job or copy of a print job.
None* Between copies Between tasks
Configure the printer language.

Hold on to tasks requiring supplies and print tasks for which these supplies are not required.
0.255 (30*) Set how many seconds the printer waits for an action from the user before the tasks that require non-available resources are put on hold and other tasks in the print queue.
Specify where all permanent sources, such as fonts and macros downloaded to the printer, should be stored.
Specify what the printer does with sources loaded into memory, such as fonts and macro-images, if there is insufficient memory for a print job.
Print order for everything
Specify the order in which held and confidential tasks are printed when All Prints is selected.
Alphabetical* Newest task as first Oldest job
Set the resolution for text and images to the printed output.
600 dpi* Image quality 1200 Image quality 2400 1200 dpi 300 dpi

Allow more pixels to be printed as cluster in order to improve text and images.
Off* Fonts Horizontal Vertical Both directions
1.1.310 (8*) Determining the brightness or darkness of images with text.
Improve printing, so that these smoother lines have sharper edges.
Adjust the brightness of the printed output.
‑6 tot 6 (0*)
0 to 5 (0*) Adjust the contrast of the printed output.
Adjust the contrast enhancement applied to images.
Set the printer to log in for the received print jobs.
Specify how often the printer makes a log.
Action log file at end of frequency
Set how the printer reacts at the end of the specified frequency.
None* E-mail current log file Email and delete Current log file Place and remove Current logfile
Log level almost full
Specify how large the log file can be before running action at Actionlog at almost full.

Action log at almost full
Specify how the printer reacts when hard drive is almost full.
None* E-mail Current Log File Email and Remove Oldest log file emails and delete Place & Delete Current Log file Post and remove Oldest Log File Delete current log file Delete oldest logfile Delete all except present log file Remove all log files
Specify how the printer reacts when maximum disk usage is reached (100 MB).
None* E-mail and delete current log file E-Mailing and Remove Oldest log file Post and Delete Current log file Place and remove oldest logfile Delete existing log file Delete all except present log file Remove all log files
URL to log Verst. Specify where the logs are placed.
Email address for sending log files Enter the email address to which the task admin log files are sent.
Prefix logfile Specify the prefix for log name.
Error pages after
Print a test page with error information, including XML markup errors.
1-30 (2*) Set the minimum width of a linepiece to a task that is printed in 1200 dpi.
Action log at full · Off* To · Minimum line thickness

Scale page contents so that it fits the selected paper size.
Specify whether to print annotations in the PDF file.
Print a test page with the PostScript error.
1-30 (2*) Set the minimum width of a linepiece to a task that is printed in 1200 dpi.
Disable the SysStart file.
Set the order in which the printer searches fonts.
Set how long the printer waits for further data before a print job is cancelled.
Choose the source that contains the default font selection.
Internal* Disk Download Flash Memory All

Select a font from the given font source.
[List with available letter types]
Display the symbol set for each font name.
[List with available symbol sets]
0.08-100 (10*) Set font pitch for scalable fixed character size fonts (monospaced).
Set the print mode of text and images on the page.
1.1.7255 Specify the number of text lines for each page printed via PCL® data stream.
1-30 (2*) Set the first minimum line width.
This sets the width of the logical page for A4 paper.
198 mm* 203 mm
Automatic HR after NR
Set the printer to perform a hard return after command for a new line.
Automatic NR after HR
The printer executes a new line after the command for a hard return.

Tray No modify
This configures the printer to work with printing control programs or applications that other source settings have for the paper source.
Out* No 0-201 Value tray [x]
Out* No 0-201 Value handm. import
Off* No 0-201 Value envelope (handm.)
Tray No modify
Display the factory setting for each paper source.
View Factory Settings Restore Defaults
Tray No modify
Reset all drawer assignments to factory values.
Set the printer to stop a job after it is inactive for a certain time (in seconds).
Set the font to use for HTML documents.
[List with fonts] (Times*)
1-255 (12*) Set the font size to be used for HTML documents.
1.0.3400% (100*) Scale HTML documents.
Set the print mode for HTML documents.
8.0.7255 mm (19*) Set the page margin for HTML documents.

Print background information or images for HTML documents.
Autom. customize
Select the best available options for paper size and image print mode.
Turn two-colored black and white images.
Adjust the image so it fits into the printable area.
Anchor Left top corner Most similar* Center anchor Hgte/width matching Adjust height Adjust width
Set the print mode of text and images on the page.
Standing* Facing standing in reverse
Set the paper source for all printing tasks.
Loader [x] (1*) Multifunction input Manual paper entry Manual envelope entry

Specify the paper size or type of paper loaded into each source.
Loading [x] Multifunction input Manual paper entry Manual envelope entry
Set when the printer enters paper from multifunctional input.
Set the printer to replace a specified paper format when the desired size is not placed in the paper source.
From Statement/A5 Letter/A4 All in list*
Universal Setting
Specify the units of measurement for Universal paper.
Set the width of standing Universal paper.
Set the height of standing Universal paper.

Set the printer to enter it from the short side or long side.
Short side* Long side
Assign the name for a scan format and configure the scanning settings.
1–8,50 inch (8,50*) 25–216 mm (216*) Hoogte
1-14 inch (14*) 25-356 mm (297*) Print position
Standing* Laying 2 scans per side Off* On
Normal Cardboard Transparency Circuit Labels Bank Post Envelope Raw Envelopes Preprinted Coloured Paper Light Heavy Raw/cotton Customized [x]
Specify the texture and weight of the paper placed. Choose from the following settings:
Smooth Normal* Raw Paper Weight

Improve the output result based on the content of the original document.
Text Text/Photo* Photo Illustrations
Improve the output result based on the source of the original document.
Black and white laser* Color Laser Inkjet Photo/film Magazine Newspaper Print Other
Specify the scanning behaviour based on original document.
One-sided to one-sided* 1-sided 2-sided to two-sided
Specify whether to insert empty separation sheets during printing.
None* Between copies Between tasks Between pages
Specify the source of paper for the separation sheet.
Tray [x] (1*) Multifunction input
Specify the number of page images to be printed on one side of a sheet of paper.
2 pages standing 4 pages standing 2 pages lying 4 pages lying
Page border print.
Place a border around each image when printing multiple pages on one sheet.
Print multiple copies in a row.
Uit [1,1,1,2,2,2] Aan [1,2,1,2,1,2]*

Format of 'Copy Of'
Specify the paper format of the original document.
Source of 'Copy to'
Specify the paper source for the copying task.
Tray [x] (1*) Multifunction input Automatic format adjustment
Lighten or darken the scanned image.
‑4 tot 4 (0*)
1-9999 (1*) Specify the number of copies.
Apply a header or footer to the printed output.
Top left Middle Upper right Lower left Middle Bottom Right
Specify the overlay text that is printed on each page of the copy job.
Confidential Copy Concept Urgent Customized Off*
Custom Overlay This allows you to specify a custom overlay text.

Specify which color is filtered out during scanning and adjust the filter setting for that colour.
None* Red Green Blue
Specify the contrast for output.
Best content setting* 0 1 2 3 4 5
Set how much of the background is visible on a scanned image.
Center the content on the page.
Create a mirror image of the original document.
Create a negative image of the original document.
Set how much shadow is visible on a scanned image.
‑4 tot 4 (0*)
Set the scan edge of the original document.
Scan from edge to border
1-5 (3*) Adjust the sharpness of a scanned image.

Insert an empty sheet between transparents.
Allow priority copies
Interrupt a print job to copy a page or document.
Scanning custom task
Enables custom task scanning by default.
Allow save as shortcut
Save the custom copy settings as shortcuts.
Preview Copy Print an example copy.
Select a fax mode.
General Fax Settings
Fax Name I.D. your fax machine.
Fax number I.D. your fax number.
Pass your fax name or number to your fax recipients.

Set the printer to fax manually.
Set the amount of internal memory for the printer allocated to fax.
Receive All Usually Receive Same* Mainly Send All
Cancel outgoing faxes before they are sent or cancel incoming faxes prior to being fully printed.
Display the telephone number of the person sending the fax.
Specify the format for masking an outgoing fax number.
From* From left from right
0-58 (0*) Specify how many numbers are hidden in a number for an outgoing fax.
Detection line connected ins-
Determine whether a telephone line is connected to the printer.
Enable detection line in wrong connection
Determine whether a telephone line is connected to the correct port on the printer.

Enable extension support
Determine whether a phone line is used by another device like another telephone on the same line.
Optimize Fax Compatibility Configure the printer's fax function for optimal compatibility with other fax machines.
Set the resolution of the scanned image.
Default* Fine Superfine Ultrafine
Specify the format of the original document.
Specify the format of the original document.
Specify the print position of text and images on the page when scanning a double-sided document.
Out* Long side Short side
Improve the output result based on the content of the original document.
Text* Text/Photo Photo Illustrations
Improve the output result based on the source of the original document.
Black and white laser* Color Laser Inkjet Photo/film Magazine Newspaper Print Other

Lighten or darken the scanned image.
‑4 tot 4 (0*)
Set the printer to select a fax number without waiting for the dial tone to be recognized.
Specify the dial mode for incoming and outgoing faxes.
Adjust the amount of toner used in each colour.
‑4 tot 4 (0*)
Specify which color is filtered out during scanning and adjust the filter setting for that colour.
None* Red Green Blue
Set the contrast of output.
Best content setting* 0 1 2 3 4 5
Set how much of the background is visible on a scanned image.
Content-based* Fixed exposure level
‑4 tot 4 (0*)

Create a mirror image of the original document.
Create a negative image of the original document.
Set how much shadow is visible on a scanned image.
‑4 tot 4 (0*)
Scan from edge to border
Set the scan edge of the original document.
1-5 (3*) Adjust the sharpness of the scanned image.
Specify whether the generated output should become cooler or warmer.
‑4 tot 4 (0*)
0-9 (5*) Adjust the number of re-choosings based on the activities of receiving fax machines.
Reset number
1.1.2002 minutes (3*) Extend the time between re-choice to increase the chances of successful fax transmission.
Enable the ECM for fax tasks.
Documents faxes scanned with the printer.
Faxing from the driver
Allow faxes to be sent via the printer driver.
Allow save as shortcut
Save fax numbers as a shortcut on the printer.

Max. speed
Set the maximum speed for sending faxes.
33600* 14400 9600 4800 2400
Scanning custom task
Enables custom task scanning by default.
An example of the scan on display.
Enable color scans for faxes.
Off by default* enabled Default Never use Always use
Automatically convert color faxes to black and white
Convert all outgoing color faxes to black and white faxes.
Ask the user to confirm the fax number.
Choose Prefix Set a prefix.
Set a line for the prefix.
Remove fax tasks that require certain non-available sources from the print queue.
None* Toner Toner and supplies
1-25 (3*) Set the number of call signals for an incoming fax.
Scale incoming fax to make it fit for the page.

Set the paper source for printing incoming faxes.
Tray [x] U-loader Auto*
Print on both sides of the paper.
Specify whether to insert empty separation sheets during printing.
Out* For task After job
Specify the source of paper for the separation sheet.
Tray [x] (1*) U-loader
Specify the output tray for received faxes.
Print the transmission information at the bottom of each page from a received fax.
Time stamp at the bottom of each page from a fax received.
Wait for the prints of received faxes until they are released.
The Fax mode in queue
Out* Always on Manual Scheduled
Set the printer to receive faxes.
Show the number from which the incoming fax came.
Block Fax Unnamed
Block incoming faxes sent from a device without drive ID or fax ID.

List of blocked fax numbers
Specify the phone numbers you want to block.
Blah, blah. Add fax
Set up a special call signal for incoming faxes.
All bell signals* Only one bell signal Only two bell signs Only three bells Only one or two bel signals Only one and three bel signs Only two or three beII signals
Set the printer to receive faxes automatically.
0-9 (9*) Enter a code manually on the phone's numerical keypad to start receiving a fax.
Specify how to send a fax received.
Print Print & Forward Forward*
Specify to which a fax received must be forwarded.
Confirmation Mail Send a confirmation email when sending a fax has been successful.
Max. speed
Set the maximum speed for sending faxes.
33600* 14400 9600 4800 2400

Configure the settings for the fax page.
Off by default* enabled Default Never use Always use
Message:
Specify how often the printer makes a transmission log.
Always* Never Only on error
Print or email a log of successful or failed fax transmissions.

A log printing of errors when receiving faxes.
Never print* Print on errors
Print all fax operations.
Specify the paper source for printing logs.
Tray [x] (1*) Multifunction input
Identify the sender by means of the external fax name or fax number.
External Fax Name* Number chosen
Display an overview of all fax tasks.
Show the history of selected fax numbers.
Specify the output tray for printed logs.
Set the fax speaker mode.
Always Off On to Connection*
Adjust the fax speaker volume.
Enable the ringtone volume.

General Fax Settings
By Classification Give up a fax receiver.
Answer Address Please specify a reply address for sending a fax.
Subject Specify a subject and the message text of the fax.
Set the printer to receive analog faxes.
Primary SMTP gateway Enter the IP address or host name of the primary Simple Mail Transfer Protocol (SMTP) for sending mail.
1-65535 (25*) Enter the port number of the primary SMTP server.
Secondary SMTP gateway Enter the IP address or hostname of the secondary or backup SMTP server.
1-65535 (25*) Enter the server port number of your secondary or back-SMTP server.
5-30 (30*) Set the time after which a time-out occurs on the printer if the SMTP server does not respond.
Answer Address Please specify a reply address for sending a fax.
Always use the default SMTP reply address
Please specify the SMTP response address for sending a fax.
Specify or faxes will be sent with an encrypted link.
Specify a trusted certificate when accessing the SMTP server.

Set the authentication type for the SMTP server.
No authentication required* Login / Normal NTLM CRAM-MD5 Digest-MD 5 Kerberos 5
Mail initiated by the device
Specifying or references are required for the device-initiated email.
Use no* SMTP references for device
User-induced email
Specifying or references are required for user-initiated email.
Use none* SMTP device references Username and session password Use e-mail address and session Password User questions
Use Active Directory Device
Enable user data and group destinations to connect to the SMTP server.
User device Specify the user ID and password to connect to the SMTP server. Password Device
Kerberos 5-realm Specify the realm for Kerberos 5 verification protocol.
NTLM domain Specify the domain name for NTLM security protocol.
Disable error message "SMTP server not set"
Hide the error message "SMTP server not configured."
Specify the file format of the scanned image.
TIFF (.tif) PDF (.pdf) * XPS (.xps) TXT (.txt) RTF ( .rtf) DOCX (.docx)

Improve the output result based on the content of the original document.
Text Text/Photo* Photo Illustrations
Improve the output result based on the source of the original document.
Black and white laser Color Laser* Inkjet Photo/film Magazine Newspaper Print Other
Set the fax resolution.
Default* Fine Superfine Ultrafine
1-9 (5*) Set the intensity of output.
Set the print mode of text and images on the page.
Specify the paper format of the original document.
Choose between TIFF files with one page or more pages.
Primary SMTP gateway Enter the IP address or hostname of the primary SMTP server used to send email.

1-65535 (25*) Enter the port number of the primary SMTP server.
Secondary SMTP gateway Enter the IP address or hostname of the secondary or backup SMTP server.
1-65535 (25*) Enter the server port number of your secondary or back-SMTP server.
5.10.330 seconds (30*) Set the time after which a time-out occurs on the printer if the SMTP server does not respond.
Answer Address Enter a reply address in the email.
Always use the default SMTP reply address
Always use the default response address in the SMTP server.
Specify or send emails with an encrypted link.
Require a trusted certificate when accessing the SMTP server.
Set the authentication type for the SMTP server.
No authentication required* Login / Normal NTLM CRAM-MD5 Digest-MD 5 Kerberos 5
Mail initiated by the device
Specifying or references are required for the device-initiated email.
Use no* SMTP references for device
User-induced email
Specifying or references are required for user-initiated email.
Use none* SMTP device references Username and session password Use e-mail address and session Password User questions
Use Active Directory Device
Enable user references and group assignments to connect to the SMTP server.

User device Specify the user ID and password to connect to the SMTP server. Password Device
Kerberos 5-realm Specify the realm for Kerberos 5 verification protocol.
NTLM domain Specify the domain name for NTLM security protocol.
Disable error message "SMTP server not set"
Hide the error message "SMTP server not configured."
Subject Specify the subject and message text of the email.
File Name Specify the file name of the scanned image.
Specify the file format of the scanned image.
PDF (.pdf) * TIFF (.tif) JPEG (.jpg) XPS (.xps) TXT (.txt) RTF ( .rtf) DOCX (.docx)
Configure the settings for optical character recognition (OCR).
Recognized Languages Automatic Rotation Optimize Auto Contrast Enhancement

Specify the PDF format of the scanned image.
1.3 1.4 1.5* 1.6 1.7 Archive version
A‐1a* A‐ 1b Very compressed
Out* To Archive (PDF/A)
Improve the output result based on the content of the original document.
Text Text/Photo* Photo Illustrations
Improve the output result based on the original document.
Black and white laser* Color Laser Inkjet Photo/film Magazine Newspaper Print Other
Specify the color when scanning an image.
Black and white Grey Color* Automatic

Set the resolution of the scanned image.
75 dpi 150 dpi* 200 dpi 300 dpi 400 dpi 600 dpi
Lighten or darken the scanned image.
-4 tot 4 (0*)
Set the print mode of text and images on the page.
Specify the paper format of the original document.
Specify the print position of text and images on the page when scanning a double-sided document.
Out* Long side Short side
Adjust the color intensity during scanning.
-4 to 4 (0*) Magenta to Green
-4 to 4 (0*) Yellow to Blue
-4 tot 4 (0*)
Specify which color is filtered out during scanning and adjust the filter setting for that colour.
None* Red Green Blue Standard threshold red
0.255 (128*) Standard green threshold
0.255 (128*) Standard threshold blue

Set how much color the printer detects from the original document.
1-9 (5*) Area sensitivity
1-9 (5*) Bitdepth e-mail
1 bit* 8 bit
Set the quality of a scanned image in JPEG format.
Best content setting* 5-95
Specify the contrast for output.
Best content setting* 0 1 2 3 4 5
Set how much of the background is visible on a scanned image.
Content-based* Fixed exposure level
‑4 tot 4 (0*)
Create a mirror image of the original document.
Create a negative image of the original document.
Set how much shadow is visible on a scanned image.
‑4 tot 4 (0*)
Set the scan edge of the original document.
Scan from edge to border
1-5 (3*) Adjust the sharpness of a scanned image.
Specify whether the generated output should become cooler or warmer.
‑4 tot 4 (0*)

Specify whether blank pages should be attached.
Empty Pages Remove Sensitivity empty pages
Max. Email format
0-65535 (0*) Set the allowed file size for each email.
Wrsch at max file size. Specify an error message that the printer sends when an email is larger than the allowed file size.
Limiting destinations Specify that email is only sent to addresses on the domain name list.
Send copy to me
Send a copy of the email to yourself.
Never Showing* Default Off Default Always On
Set a limit for the number of email recipients.
Cc:/bcc: use
Enable CC (carbon copy) and BCC (blind carbon copy) in email.
Choose between TIFF files with one page or more pages.
Set a compression option for TIFF files.
5-95 (75*) Set the quality of text on a scanned image.
Set the quality of text or a photo on a scanned image.
5-95 (50*) Set the quality of a photo on a scanned image.

Print a log with successful email transfers.
Do not print log* Log Book Only print on errors
Specify the paper source for printing logs.
Tray [x] (1*) Multifunction input
Scanning custom task
Enables custom task scanning by default.
Displays the scan preview on screen.
Allow save as shortcut
Save email addresses as shortcuts.
Specify how the images are sent in an email.
Recover mail information after sending
Restore the default email information after sending an e-mail.
Server Set the printer to send email as a web link.

Specify the file format of the scanned image.
PDF (.pdf) * TIFF (.tif) JPEG (.jpg) XPS (.xps) TXT (.txt) RTF ( .rtf) DOCX (.docx)
Configure the settings for optical character recognition (OCR).
Recognized Languages Automatic Rotation Optimize Auto Contrast Enhancement
Specify the PDF format of the scanned image.
1.3 1.4 1.5* 1.6 1.7 Archive version
A‐1a* A‐ 1b Very compressed
Out* To Archive (PDF/A)
Improve the output result based on the content of the original document.
Text Text/Photo* Illustrations Photo

Improve the output result based on the source of the original document.
Black and white laser Color Laser* Inkjet Photo/film Magazine Newspaper Print Other
Specify the color when scanning an image.
Black and white Grey Color* Automatic
Set the resolution of the scanned image.
75 dpi 150 dpi* 200 dpi 300 dpi 400 dpi 600 dpi
Lighten or darken the scanned image.
-4 tot 4 (0*)
Set the print mode of text and images on the page.
Specify the paper format of the original document.
Specify the print position of text and images on the page when scanning a double-sided document.
Out* Long side Short side
File Name Specify the file name of the scanned image.

Adjust the color intensity during scanning.
-4 to 4 (0*) Magenta to Green
-4 to 4 (0*) Yellow to Blue
-4 tot 4 (0*)
Specify which color is filtered out during scanning and adjust the filter setting for that colour.
None* Red Green Blue Standard threshold red
0.255 (128*) Standard green threshold
0.255 (128*) Standard threshold blue
Set how much color the printer detects from the original document.
1-9 (5*) Area sensitivity
1-9 (5*) Bit depth FTP
1 bit* 8 bit
Specify the quality of a JPEG image.
Best content setting* 5-95
Specify the contrast for output.
Best content setting* 0 1 2 3 4 5

Set how much of the background is visible on a scanned image.
Content-based* Fixed exposure level
‑4 tot 4 (0*)
Create a mirror image of the original document.
Create a negative image of the original document.
Set how much shadow is visible on a scanned image.
‑4 tot 4 (0*)
Set the scan edge of the original document.
Scan from edge to border
1-5 (3*) Adjust the sharpness of a scanned image.
Specify whether the generated output should become cooler or warmer.
‑4 tot 4 (0*)
Specify whether blank pages should be attached.
Empty Pages Remove Sensitivity empty pages
5-95 (75*) Set the quality of text on a scanned image.
Set the quality of text or a photo on a scanned image.
5-95 (50*) Set the quality of a photo on a scanned image.
Choose between TIFF files with one page or more pages.
Set a compression option for TIFF files.

Print a log with successful FTP scan transfers.
Do not print log* Log Book Only print on errors
Specify the paper source for printing FTP logs.
Tray [x] (1*) Multifunction input
Scanning custom task
Enables custom task scanning by default.
An example of the scan on display.
Allow save as shortcut
Save custom FTP settings as shortcuts.
Specify the file format of the scanned image.
PDF (.pdf) * TIFF (.tif) JPEG (.jpg) XPS (.xps) TXT (.txt) RTF ( .rtf) DOCX (.docx)
Configure the settings for optical character recognition (OCR).
Recognized Languages Automatic Rotation Optimize Auto Contrast Enhancement

Specify the PDF format of the scanned image.
1.3 1.4 1.5* 1.6 1.7 Archive version
A‐1a* A‐ 1b Very compressed
Out* To Archive (PDF/A)
Improve the output result based on the content of the original document.
Text Text/Photo* Illustrations Photo
Improve the output result based on the source of the original document.
Black and white laser Color Laser* Inkjet Photo/film Magazine Newspaper Print Other
Specify the color when scanning an image.
Black and white Grey Color* Automatic

Set the resolution of the scanned image.
75 dpi 150 dpi* 200 dpi 300 dpi 400 dpi 600 dpi
1-9 (5*) Lighten or darken the scanned image.
Set the print mode of text and images on the page.
Specify the paper format of the original document.
Specify the print position of text and images on the page when scanning a double-sided document.
Out* Long side Short side
File Name Specify the file name of the scanned image.
Adjust the color intensity during scanning.
-4 to 4 (0*) Magenta to Green
-4 to 4 (0*) Yellow to Blue
-4 tot 4 (0*)

Specify which color is filtered out during scanning and adjust the filter setting for that colour.
None* Red Green Blue Standard threshold red
0.255 (128*) Standard green threshold
0.255 (128*) Standard threshold blue
Set how much color the printer detects from the original document.
1-9 (5*) Area sensitivity
1-9 (5*) Bitdepth e-mail
1 bit* 8 bit
Specify the quality of a JPEG image.
Best content setting* 5-95
Specify the contrast for output.
Best content setting* 0 1 2 3 4 5
Set how much of the background is visible on a scanned image.
Content-based* Fixed exposure level
‑4 tot 4 (0*)
Create a mirror image of the original document.

Create a negative image of the original document.
Set how much shadow is visible on a scanned image.
‑4 tot 4 (0*)
Scan from edge to border
Set the scan edge of the original document.
1-5 (3*) Adjust the sharpness of a scanned image.
Specify whether the generated output should become cooler or warmer.
‑4 tot 4 (0*)
Specify whether blank pages should be attached.
Empty Pages Remove Sensitivity empty pages
5-95 (75*) Set the quality of text on a scanned image.
Set the quality of text or a photo on a scanned image.
5-95 (75*) Set the quality of a photo on a scanned image.
Choose between TIFF files with one page or more pages.
Set the compression option for TIFF files.
Scanning custom task
Enables custom task scanning by default.
An example of the scan on display.

1-9999 (1*) Enter the desired number of copies.
Specify the paper source for the print job.
Loader [x] (1*) Multifunction input Manual paper entry Manual envelope entry
Print multiple copies in a row.
Uit [1,1,1,2,2,2] Aan [1,2,1,2,1,2]*
This will determine whether to print on one side or two sides of the paper.
Determine which side of the paper (long side or short side) is bound when printing double-sided.
Long side* Short side
Print images over multiple pages on a sheet of paper.
Out* 2 per sheet 3 per sheet 4 per sheet 6 per sheet 9 per sheet 12 per sheet 16 per sheet
Pages by side - sorting
Specify multiple page positioning when using Pages per side.
Horizontal* Reverse horizon. Vertical Reverse
Pages per side - Print Mode
Specify the print position of a multi-page document when using Pages per side.
Pages per side - border
Print a border around each page when using Pages per side.

Specify whether to insert empty separation sheets during printing.
Out* Between copies Between tasks Between pages
Specify the source of paper for the separation sheet.
Tray [x] (1*) Multifunction input
Set whether to insert empty pages into a print job.
Specify how a network is connected.
Network status Displays the connection status of the printer network.
Display network status on printer
Displays network status on screen.
Speed, duplex Displays the speed of currently active network card.
IPv4 Displays the IPv4 address.
All IPv6 Addresses Displays all IPv6 addresses.
Restore Print Server Reset all active network connections to the printer.
This allows you to set up after how much time a network print job is canceled.
Off On* (90 seconds)
Print a front page.
9751:12000* Specify a valid port range for printers behind a firewall that blocks ports.

Configuration via the mobile app Configure the Wi-Fi connection using Lexmark Mobile Assistant.
Set up on the printer's control panel
Configure the Wi-Fi connection via the control panel.
Choose Network Add Wi-Fi network
Infrastructure Security mode for wireless
Disabled* WEP WPA2/WPA - Personal WPA2 - Personal 802.1x - RADIUS
Wi‑Fi Protected Setup
Set up a Wi-Fi network and enable network security.
WPS autom. detect
Off On* Start a pushbutton method Starting with PIN
Specify network mode.
Wi‑Enable Fi Direct
Set Wi-Fi Direct devices to connect directly to the printer.
Please specify the standard Wi-Fi network usage for the wireless network.
802.11b/g/n (2.4 GHz) * 802.11.a/b/w/n/ac (2.4GHHHh) 802.10a/n-ac (5 GHz)
Set the security mode to connect the printer to Wi-Fi devices.
Disabled* WEP WPA2/WPA - Personal WPA2-Personal 802.1x - RADIUS

Set the type Wireless Encryption Protocol (WEP) for the printer.
Set WEP Key Please enter a WEP password for secure Wi-Fi connection.
Set Wi-Fi connection via Wi-fi Protected Access (WPA).
Set pre-share key Set the password for a secure Wi-Fi connection.
Set up Wi-Fi connection via WPA2.
802.1x Encoding Mode WPA+ WPA2*
Set Wi-Fi connection via the standard 802.1x.
Enable and configure the IPv4 settings in the printer.
To* Set from Static IP Addresses
Enable and configure the IPv6 settings in the printer.
Enable * From DHCPv6
On Out* Stateless Address Autoconfiguration
To* From DNS server address Manually assigned IPv6 address Manual allocated IPv6-router Address prefix All IPv4 addresses All IP v6 routers

Show the network addresses.
Set the printer to automatically switch to PCL emulation if required by a printing job, regardless of default printer language.
Set the printer to automatically switch to PS emulation if required by a printing job, regardless of default printer language.
Temporaryly save print jobs to the printer's hard drive before printing.
Set printer to process binary PostScript printing tasks for Macintosh.
Display the speed of an active network adapter.
Enable Dynamic Host Configuration Protocol (DHCP).
Enter the static IP address of your printer.
Configure IPv6 on the printer.

Run DHCPv6 in an IPv6 network.
Set the network adapter to accept IPv6 addresses automatically configured by a router.
DNS Address Specify the DNS server address, IP address and router for the IPv6 network.
All IPv6 Addresses Display all IP and router addresses used in an IPv6 network.
Display the printer's MAC (Media Access Control) addresses: Locally Administrator- tered Address (LAA) and Universally Administered Address.
Set the printer to automatically switch to PCL emulation if required by a printing job, regardless of default printer language.
Set the printer to automatically switch to PS emulation if required by a printing job, regardless of default printer language.
Set printer to process binary PostScript printing tasks for Macintosh.
This limits power consumption if the printer does not receive data from the Ethernet network.

Set host name Set the current TCP/IP hostname.
Domain Name Set the domain name.
Allow DHCP/BOOTP to update the NTP server
Allow DHCP and BOOTP clients to update the printer's NTP settings.
Configuration-free program name Specify a service name for the configurationless network.
Automatically assign an IP address.
DNS Server Address Specify the current DNS server address (Domain Name System).
Backup DNS server address Specify the backup DNS server address.
Domain search order Specify a list of domain names to search for the printer and sources that are located in different domains on the network.
Update the dynamic DNS settings.
DDNS TTL Specify the current DDNS settings.
Update multicast DNS settings.
WINS Server Address Specify a server address for Windows Internet Name Service (WINS).
Allow the BOOTP to assign an IP address of the printer.
Limited Server List Specify an IP address for the TCP connections.

Limited Server List Options
Specify how IP addresses in the list can access printer functions.
Block all ports* Block only prints Only print and block HTTP
MTU Specify an MTU parameter (maximum transmission unit) for the TCP-compounds.
1-65535 (9100*) Specify a raw port number for printers connected to a network.
Maximum speed of outgoing traffic
Set the printer to maximum transfer speed.
Enable the SSLv2 protocol.
Enable the SSLv3 protocol.
Enable TLSv1.0
Enable the TLSv1.0 protocol.
Enable TLSv1.1
Enable the TLSv1.1 protocol.
SSL Encoding List Specify cipher algorithms to be used for SSL or TLS connections.

SNMP versions 1 and 2c
Configure SNMP versions 1 and 2c (Simple Network Management Protocol) for installing printer drivers and applications.
Allow off* Setup SNMP
Enable Out* PPM MIB
Configure SNMP version 3 for installing and updating the printerbe- security.
Off To* Set Read/Write References
User Name Password Set Read-only References
User Name (Username) Password Verification hash
MD5 SHA1* Minimum level of verification
No verification, no privacy Verification, no Privacy Verification, privacy* Privacy algorithm
Enable Internet Protocol Security (IPSec).

Specify the IPsec base configuration.
Specify the IPSec encoding.
modp2048 (14)* modp3072 (15) modp4069 (16) modp6144 (17) modp8192 (18)
IKE SA life (hours)
Set the amount of time before a new verification code is generated.
1 2 4 8 24*
IPSec SA life (hours)
1 2 4 8 24*
Specify the encryption and verification methods to connect safely to a network.
IPSec Device Certificate Specify an IPsec certificate.
Verified connections with pre-shared key
Configure the verified connections of the printer.
Verified links of certificate

Allow the printer to access networks that require verification.
0.7.65535 seconds (90*) Set the time-out value to stop the LPD server (Line Printer Daemon) from waiting infinitely for blocked or invalid printing tasks.
Print a front page for all LPD print jobs.
Print an info page for all LPD print jobs.
Enable LPD line rundown conversion.
Go to the Embedded Web Server to monitor and manage the printer.
Configure the HTTPS settings (HyperText Transfer Protocol Secure).

Send files via FTP.
Local domains Specify domain names for HTTP and FTP servers.
HTTP proxy IP address Configure the settings for the HTTP and FTP server.
1-299 (30*) Specify the amount of time before the server connection is terminated.
Nwe pog. for HTTP/FTP requests
1-299 (3*) Set the number of new attempts to connect to the HTTP/FTP server.
Print from ThinPrint.
4000-4999 (4000*) Set the port number for ThinPrint server.
Specify the speed at which data is transmitted in a ThinPrint environment.
0-64000 (0*) Set the data transfer package size.
Set the printer to switch to PCL emulation if required by a print job on the USB port, regardless of default printer language.

Set the printer to switch to PS emulation if required by a print job on the USB port, regardless of default printer language.
Set the printer to perform special processing for bidirectional communication, as defined in the specifications of the NPA protocol.
Set printer to process binary PostScript printing tasks for Macintosh.
Enable the default USB port.
Register the printer with Google Cloud server.
Print directly from your Google account.
Allow higher data transfer bandwidth.
Check the authenticity of peer certificate to connect with your Google account.
Enable the Always Print function as an image.
Always print as an image.

SSID Specify the service set identifier (SSID) of the Wi-Fi network.
Set pre-share key Set the pre-shared key (PSK) for verifying and validating users on a Wi-Fi connection.
Show PSK on Settings Page
Show the PSK on the network settings page.
Group owner IP address Specify the group owner's IP address.
Automatically accept requests to connect to the network.
Manage authorisations
Manage access to printer functions.
Open address book in Apps Customize Address Book Shortcuts Manage shortcuts Profiles Create Bookmarks Managing print flash drive Scanning to flash drive Copy function Color filtering away Email function Fax function FTP feature Free queue faxes Access to tasks pending Cancel user profiles Change language Internet Printing Protocol (IPP) Start scans externally Black and white printing

Manage access to the printer menu settings.
Menu Security Menu Network/Ports Menu Paper Menu Reports Function Configuration Menus Accessories, Menu Menu Option Card SE menu Device Menu
Set access to printer management options.
Remote management Firmware updates App configuration Lock Control Panel Clear all settings im/export Old device
Manage access to the printer applications.
New apps Show Scan Center Change Background Scan Centre Copy Scan center Scan centre Customized 1 Scancent Center Customised 2 Scan Central Customed 3 Scan Center Customize 4 Scan Centres 5 Scan centres customized 6 Scans Center Custommed 7 Scan Club Customizes 8 Scan
Managing Menus · Device Manager · Apps

Manage access of groups or users to printer functions, applications and security settings.
Access to Functions Manager Menus Device Management Apps All Users
Access to Functions Manager Menus Device Management Apps Management
Create local accounts to manage access to printer functions.
Username/password UserName (Username) Password Pincode
Schedule access to USB ports.
Record events in the secure control log and external system log.

Send control logs to a remote server.
External system log server Specify the remote system log server.
1-65535 (514*) Specify the external system log port.
Specify a system log method for transferring recorded events to an external server.
Specify a facility code that the printer uses when sending log events to an external server.
0 - Kernel Messages 1 - User Level Messages 2 - Mail System 3 - System daemons 4 - Security/Authorisation Messages* 5 - Messages are generated internally by syslogs 6 - Network subsystem 8 - Network subsystems 8 - UUCP 9 - Clockdaemon 10 - Security-/AUTHORIZATION Messages 11 - FTP daemon 12 - NTP subsystem 13 - Log control 14 - Login 15 - Clocamon 16 - Local usage 0 (local0) 17 - Local use 1 (local1) 18 - Local Use 2 (local2) 19 - Local Usage 3 (local3) 20 - Local uses 4 (local4) 21 - Local users 5 (local5) 22 - Local consumption 6 (local6) 23 - Local user 7 (local7)
Sensation of events recorded
Specify the priority level limit for recording messages and events.

External system log of unregistered events
Send all events to the remote server, regardless of urgency level.
Administrator's Email Address Send email notification about registered events to the administrator.
Send mail notification to the administrator when a login is deleted.
Send email notification to the administrator when the log is full and starts overwriting the oldest items.
Behavior at log full
Resolve storage problems with log when the log has used its assigned memory.
Retreat Oldest Items* Log Email and Remove All Items
Send email notification to the administrator when a log uses the assigned memory.
Send mail notification to the administrator when a log is exported.
Send mail notification to the administrator when Enable Check is enabled.
Specify how each line is terminated in a log.
LF (\n)* CR (\r) CRLF (\R\n).
Add a digital signature to each imported log.
Clear Log Delete all control logs.
Export a security log to a flash drive.
Syslog (RFC 5424) Sysalog (RF C 3164) CSV

1.1.310 (3*) Specify the number of failed login attempts before blocking a user.
Time frame for failed attempts
1.7.260 minutes (5*) Specify the time period between failed login attempts before locking the user.
1.10.1960 minutes (5*) Specify the duration of lockdown.
1.1.1120 minutes (10*) Specify the delay for an external login before user is automatically unsubscribe.
Max. invalid PIN
2.10.310 Set how often an invalid PIN can be entered.
Set a time-out for confidential printing tasks.
Out* 1 hour 4 hours 24 Hours (24 hours) 1 week
Time-limit for repeated tasks
Set the time limit for a print job you want to repeat.
Out* 1 hour 4 hours 24 Hours (24 hours) 1 week
Time-limit for controlled tasks
Set the time limit for printing a copy for the user to check quality before the user prints the remaining copies.
Out* 1 hour 4 hours 24 Hours (24 hours) 1 week

Time-out for reserved tasks
Set a time-out for saving print jobs to print at a later date.
Out* 1 hour 4 hours 24 Hours (24 hours) 1 week
Required queue all tasks
Set the printer to queue all print jobs.
Set the printer to print other documents with the same file name without overwriting existing printing tasks.
Determining whether disk encoding is enabled.
Start Encoding Avoid loss of sensitive data in case of theft of printer or hard drive.
Stored in internal memory
Delete all files stored in printer memory.
Saved to hard disk
Delete all files stored on the hard drive of the printer.
Clear in one passage* In 3 transits In 7 passes

Search the various servers in the domain on the account of the registered user.
Enable LDAP certificate verification.
Enable functions in the AirPrint software.
Display all functions protecting Function Access Management (FAC) regardless of the security clearance that the user has.
Allow the user to log in before printing.
Set the default login data for Print Authorization.
Jumper for reset security
Specify the effect of using the jumper for hardware security.
Enable access for 'Guest'* No effect
0-32 (0*) Specify the minimum number of characters required for a password.

Page Menu Settings Print a report with printer preferences, settings and configurations.
Device Data Print a report with information about the printer.
Device statistics Print a report on printer usage and supply status.
Profile List Print a list of profiles stored on the printer.
Print examples and information about the fonts available in each printer language.
Print Directory Print the sources stored on the flash drive or on the hard disk of the printer.
All Shortcuts Print a report of the shortcuts stored in the printer.
Fax Task Log Print a report on the last 200 fax jobs completed.

Print a report on the last 100 attempts to place a call, the calls received and the blocked calls.
Pag. Network in-stell.
Print a page with the network settings and wireless network confi-gured on the printer.
Print all manuals This prints out all guides and manuals.
Help print mat. Contains information on the placement of paper and special printing material
Copy Manual Contains information about making copies and configuring the settings
Email Manual Contains information about sending emails and configuring the settings
Fax Manual Contains information on sending faxes and configuring the settings
Scan Manual Contains information on document scanning and configuration
Contains information on how to solve problems with print quality.
Contains information about mono-print quality settings
Information Contains more information about the printer
Connection Guide Contains information about connecting the printer via USB (local) or to a network.
Help in transport Contains information about moving, locating or sending the printer
Help with supplies Provides information about ordering supplies
Test page Print sample pages to identify and correct defects in the print quality.
Clean Scanner Print instructions for cleaning the scanner.
Choose Log Fax Numbers · Print quality guide · Monoquality manual

Hit in the Home screen Institutions > Reports > Page with menu settings On.

Find the security slot
The printer has a locking function. At the specified location, confirm a security lock compatible with most laptops to lock the printer in place.

To erase volatile memory or buffered data in your printer, you need to disable the printer.
To erase non-volatile memory or individual settings, device and network settings and security settings as well as embedded solutions, do the following:
1 From the start screen, go to Institutions > Device > Maintenance > Clear Old Device.
2 Select the box Clean up all information about non-volatile memory and then hit CLEAR On.
3 Follow the instructions on the display.
1 From the start screen, go to Institutions > Device > Maintenance > Clear Old Device.
2 Select the box Clean all information on hard drive and then hit CLEAR On.
3 Follow the instructions on the display.
Secure printer 137

This process removes the entire contents of the hard drive. If necessary, back up important data from the printer before starting coding.
1 Go from Home screen to Institutions > Security > Write Encoding > Start Encoding.
2 Follow the instructions on the display.
Hit in the Home screen Institutions > Device > Reset Factory Settings > Restore Settings > Restore All Settings > RECOVER > Start.
For more information, see 'Clear Printer Memory' on page 137.
The printer uses standard RAM (Random Access Memory) to buffer user data during simple printing and copying tasks.
The printer may use two types of non-volatile memory: EEPROM and NAND (flash-remember). Both types are used for the storage of operating system, printer settings, network information, scanner and bookmarking settings and embedded solutions.
Hard drive Some printers may have installed a hard disk. The printer's hard drive is designed for printer-specific functions. With the hard disk, printer can store buffered user data for complex printing tasks and form and font data.
In the following cases, you must delete the contents of your printer memory:

Secure printer 139

1 Browse the control panel to:
Institutions > Device > Preferences > Audio Feedback
2 Adjust the volume.
1 Browse the control panel to:
Institutions > Device > Preferences
2 Adjust the volume of headphones.
1 Hit from the start screen Institutions > Fax > Analog Fax Settings > Speaker Settings On.
Maintaining printer 140

1 In the start screen, browse for:
Institutions > Network/Ports > Wireless
2 Select Set up on the printer's control panel and follow the instructions on display.
1 Depending on your mobile device, you download the Lexmark Mobile Assistant application from Google PlayTM store or App Store online store.
2 Browse the control panel to:
Institutions > Network/Ports > Wireless > Configuration via the mobile app > Continue for printer ID
3 Start the application from your mobile device and then accept the terms of use.
4 Granting permissions.
5 Tap Start Wi-Fi Configuration and select the printer.
6 Select a Wi-Fi network and then enter your login data.
7 Tap Complete Wi-Fi Configuration.
Check the following before you start:
1 Browse the control panel to:
Institutions > Network/Ports > Wireless > Wi-Fi Protected Setup > Start a push-button method
2 Follow the instructions on the display.
Maintaining printer 141

1 Browse the control panel to:
Institutions > Network/Ports > Wireless > Wi-Fi Protected Setup > Start PIN method
2 Copy the eight-digit WPS PIN.
3 Open a web browser and type the IP address of the access point in the address bar.
4 Open the WPS settings. For more information, please refer to the documentation provided at the access point.
5 Enter the eight-digit PIN and save changes.
1 Select in the Start screen Institutions > Network/Ports > Network Overview > Active Adapter > Standard network.
2 Follow the instructions on the display.
1 Open the printer folder.
2 In the printer's quick menu with the new ISP, open Printer Properties.
3 Configure the port in the list.
4 Update the IP address.
5 Apply the changes.
Maintaining printer 142

1 Via System Preferences in the Apple menu, navigate to the list of printers and then select + > IP.
2 Type the printer's IP address in the address bar.
3 Apply the changes.
NOTE: DANGER OF ELECTRIC SHOCKS: To avoid the risk of electric shocks, pull the power cord plug out and unplug all cables connected to the printer before cleaning the outside of the printer.
1 Turn off the printer and pull the plug on the power cord of the printer from the socket.
2 Remove all the paper from the standard tray and multifunctional input.
3 Clean the printer with a soft brush or vacuum cleaner to remove dust, ink ribbon and pieces of paper in and around the printer.
4 Wipe the outside of the printer with a damp, soft, lint-free cloth.
5 Connect the power cord plug to the socket and turn on the printer.
PLEASE NOTE: RISK OF INJURY: To avoid the risk of electric shocks or fire, you need to connect the power cord directly to a grounded outlet close to the product and which is easily accessible.
Maintaining printer 143

1 Open the valve of the scanner.

2 Wipe the following areas with a damp, soft, lint-free cloth: • ADI glass plate

Printer maintenance 144




3 Close the scanner valve.
Maintaining printer 145

4 Open the valve of the ADF.

5 Wipe the following areas with a damp, soft, lint-free cloth: • ADI glass-plate cover in the ADI valve


6 Close the ADF valve.
Printer maintenance 146

If you want to order parts and supplies in the US, please call 1-800-539-6275 for information about authorised dealers of Lexmark around you. In other countries or regions you will go to www.lexmark.com, or contact the store where you bought the printer.
Your Lexmark printer works best with original Lex Mark parts and supplies. When you use supplies or parts of other manufacturers, this may have a negative impact on the performance, reliability or lifetime of the printer and image processing components of the device. It may also affect your guarantee. Damage caused by the use of parts or supplies from other manufacturers is not covered by the warranty. All life indicators are designed to function with Lexmark components and supplies. If you use parts or supplies from other manufacturers, this may lead to unpredictable results. The use of image processing components longer than the intended life span can damage your Lexmark printer or its parts.
1 Hit in the Home screen Status/Supplies On.
2 Select the parts or supplies you want to check.
Rest of Europe, the
Return program toner cartridge with high efficiency
Return program toner cartridge with extra high efficiency


* Only available for contract-managed printers. Please contact your Lexmark representative or system administrator for more information.
Lexmark XM3250 toner cartridge from return programme


Maintaining printer 148 · Item Whole World · Normal toner cartridge 56F0UA0


Order image processing unit
Extremely low print coverage over longer periods can cause parts of the image processing unit to break before the toner runs out.

* This image processing unit is only available for contract-managed printers. Please contact your Lexmark representative or system administrator for more information.
Choose the maintenance kit that matches the printer voltage.


1 Open a web browser and type the printer IP address in the address bar.
2 Click on Institutions > Device > Notifications.
3 In the Supply menu, click on Custom supply notifications.
4 Select a notification for each component.
5 Apply the changes.
1 Open valve A.

Maintaining printer 150

2 Remove the used toner cartridge.

3 Remove the new toner cartridge from the package and shake it three times to distribute the toner.

4 Place new toner cartridge

5 Close valve A.
Maintaining printer 151

1 Open valve A.
2 Remove the toner cartridge.

3 Remove the used image processing unit.

Maintaining printer 152

4 Remove the new image processing unit from the packaging and shake it three times to distribute the toner.


5 Place the new image processing unit.

6 Place the toner cartridge.
Maintaining printer 153

7 Close valve A.
1 Open the door of the stapler.

Maintaining printer 154

2 Remove the non-cassette.

3 Remove the spare non-cassette.

Maintaining printer 155

4 Please do not put the spare cassette.

5 Close the valve of the stapler.
1 Turn off the printer.
2 Pull the plug from the power cord and remove the power cable from the printer.
3 Remove the drawer.
Maintaining printer 156

4 Remove the used packing straps piece by piece.

5 Remove the new packing tapes from the package.
Maintaining printer 157

6 Place the new packing tapes.

7 Put the drawer back.
8 Connect the power cord to the printer and then connect it to an outlet.
PLEASE NOTE: RISK OF INJURY: Connect the power cord to a grounded outlet close to the product and easily accessible to prevent fire or electric shocks.
9 Turn on the printer.
1 Turn off the printer.
2 Pull the plug from the power cord and remove the power cable from the printer.
3 Remove the optional drawer.
PLEASE NOTE: RISK OF INJURY: If the printer weighs more than 18 kg (40 lb), it must be moved by two or more trained staff.
Maintaining printer 158


Maintaining printer 159

4 Remove the housing and then turn over the paper holder.

5 Remove the used grab roller mechanism.

6 Remove the new grab roller mechanism from the package.
Maintaining printer 160

7 Place the new grab roller mechanism.

8 Turn the paper holder and then place the housing.
Maintaining printer 161

9 Adjust the printer with the optional tray and lower the printer until it clicks.

10 Connect the power cord to the printer and then connect it to an outlet.
PLEASE NOTE: RISK OF INJURY: Connect the power cord to a grounded outlet close to the product and easily accessible to prevent fire or electric shocks.
11 Turn on the printer.
1 Open the valve of the ADF.

Maintaining printer 162

2 Remove the used ADF separator.

3 Remove the new ADF separator from the packaging.
Maintaining printer 163

4 Place the new ADF separator until it clicks.

5 Close the ADF valve.
Maintaining printer 164

PLEASE NOTE: RISK OF INJURY: If the printer weighs more than 18 kg (40 lb), it must be moved by two or more trained staff.
PLEASE NOTE: RISK OF INJURY: Use only the power cord supplied with this product or a replacement component approved by the manufacturer to prevent fire or electric shocks.
PLEASE NOTE: RISK OF INJURY: Follow these guidelines when moving the printer to prevent injury or damage of your printer:
Transport the printer.
For shipping instructions, go to http://support.lexmark.com or contact customer support.
Maintaining printer 165

1 In the start screen, tap Institutions > Device > Energy management > Ecomode.
2 Pick an institution.
1 In the start screen, tap Institutions > Device > Energy management > Time-outs > Sleep Mode.
2 Specifying the amount of time must pass before the printer switches to sleep mode.
1 In the start screen, tap Institutions > Device > Energy management > Time-outs > Sleep timeout.
2 Specifying the amount of time must pass before the printer switches to sleep mode.
1 From the start screen, go to Institutions > Device > Preferences > Brightness of the screen.
2 Adjust the setting.
You return Lexmark products for reuse as follows:
1 Go www.lexmark.com/recycle.
2 Select the product you want to recycle.
Maintaining printer 166 · Eco‑mode

Lexmark is constantly aiming to minimise packaging material. Less packaging helps to transport Lexmark printers in the most efficient and environmentally friendly way, and reduces the need for waste. This results in less greenhouse gas emissions and savings of energy and natural resources. Lexmark offers recycling of packaging material in some countries and regions. For more information, please visit www.lexmark.com/recycle and then choose your country or region. Information on available recycling programmes of packaging material is included in the product recycling information.
Lexmark boxes are 100% recyclable when facilities for recycling cardboard are available. Such facilities may not exist in your area.
The Styrofoam used in Lexmark packaging material is recyclable when facilities are available. Such facilities may not exist in your area.
When you return a cartridge to Lexmark, use the box in which the cartridge was originally delivered. This box is recycled by Lexmark.
With the Lexmark Cartridge Collection Program, you can return used cartridges to Lex Mark for free for reuse or recycling. One hundred percent of empty cartridges returned to Lexmark are reused or processed for recycling. The boxes used to return the cartridges are also recycled.
Lexmark cartridges can be returned for reuse or recycling as follows:
1 Go www.lexmark.com/recycle.
2 Select the product you want to recycle.
Printer maintenance 167

Preventing paper failures
Paper is correctly placed Paper is not correctly placed



Paper failures remedy 168



1 Remove the drawer.

2 Open valve A.


3 Remove the toner cartridge.

4 Remove the image processing unit.

Resolve paper failures 171


5 Remove the stuck paper.
NOTE: HOT SURFACE: The inside of the printer can be hot. To avoid injury, you should cool a hot surface before touching it.
Resolve paper failures 172


6 Place the image processing unit.

Resolving paper failures 173

7 Place the toner cartridge.

8 Close valve A.
9 Put the drawer back.
1 Open the tailgate.
NOTE: HOT SURFACE: The inside of the printer can be hot. To avoid injury, you should cool a hot surface before touching it.

2 Remove the stuck paper.
Resolve paper failures 174


3 Close the tailgate.
Remove the stuck paper.

Resolve paper failures 175

1 Remove the drawer.
2 Remove the stuck paper.

3 Place the drawer.
Resolve paper failures 176

1 Remove the drawer.
2 Remove the stuck paper.

3 Put the drawer back.
1 Remove the paper from multifunctional input.
2 Remove the stuck paper.
Resolving paper failures 177


3 Bend the paper, fan it out and align the edges before inserting it into the printer.
4 Reload paper and then adjust the paper guide.

1 Remove all original documents from the ADF drawer.
2 Open the valve of the ADF.

3 Remove the stuck paper.
Resolve Paper Failures 178


4 Close the ADF valve.
1 Remove the paper from the finisher tray.

2 Remove the stuck paper.

Resolve Paper Failures 179

1 Open the finisher's tailgate.

2 Remove the stuck paper.

3 Open the narrow valve of the finisher and remove any pieces of paper.

4 Close the valves.
Paper failures remedy 180

1 Open the door of the stapler.
2 Remove the non-cassette holder.

3 Lift the non-cap and remove the loose staples.

Paper failures remedy 181

4 Close the non-protector.

5 Place the non-cassette holder.

6 Close the door of the stapler.
Paper failures remedy 182

Network connection problems
Go to step 2. Turn on the printer.
Check that the printer is enabled.
- Is the printer enabled?
Go to step 3. Type the correct IP address of the printer in the address bar.
Make sure the printer's IP address is correct.
Display the printer's IP address:
Is the printer's IP address correct?
Go to step 4. Install a under-supported browser.
Check if you are using a supported browser:
Is your browser supported?
Go to step 5. Contact your administrator.
Check that the network connection is active.
Is the network connection active?
Go to step 6. Fix the cable connection.
Make sure that the cable connections to the printer and print server are securely attached. Please refer to the documentation provided with the printer for more information.
- Are the cables secure?

Go to step 7. Contact your administrator.
Check that the web proxy servers are disabled.
Have the web proxy servers been disabled?
The problem is solved.
Contact Customer support.
Get access to the Embedded Web Server.
Is the Embedded Web Server being opened?
Go to step 2. Wait until the printer has finished processing the other task.
Check that the printer is not processing another printing, copying, scanning or fax job.
Is the printer ready?
Step 2 Check that the flash drive is in front USB port.
Go to step 3. Place the flash drive in the right port.
Has the flash drive been placed in the right port?
Step 3. Check that the flash drive is supported. See 'Supported flash drives and file types' on page 36 for more information.
Go to step 4. Place a under-supported flash drive.
Is the flash drive supported?
The problem is solved.
Contact Customer support.
a Check that the USB port is enabled. See 'USB port'
activate' on page 184 for more information. b Remove the flash drive and then place it again.
Does the printer recognize the flash drive?
Hit in the Home screen Institutions > Network/Ports > USB > Activate USB port On.

1 From the start screen, go to Institutions > Reports > Network > Network Settings Page.
2 Check the first part of the page with network settings to see if Status indicates that the printer is connected.
If Status indicates that the printer is not connected, it may be that the LAN connection point is not active or that the network cable is not functioning properly. Contact your administrator for support.
The problem is solved.
Go to step 2.
Turn off the printer and then turn on the printer after about 10 seconds.
Is the internal option working well?
Step 2 Print a page with menu settings and check if the internal option is listed in the list of installed functions.
Go to step 4. Go to step 3.
Is the internal option displayed on the menu setting page?
The problem is solved.
Go to step 4.
Check that the internal option is properly installed on the controller card.
a Turn off the printer and pull the plug on the power cord of the
printer out of the socket. b Make sure the internal option on the right connector is
controller card installed. c Connect the power cord plug to the socket and put the
printer on.
PLEASE NOTE: RISK OF INJURY: Connect the power cord to a grounded outlet close to the product and easily accessible to prevent fire or electric shocks.
Is the internal option working well?

The problem is solved.
Contact Customer support.
a Check that the internal option is available in the print steering
program.
Is the internal option working well?
Step 1 Print a page with menu settings and check that the Internal Solutions Port (ISP) is listed in the installed functions list.
Go to step 3. Go to step 2.
Is the ISP in the list of installed functions?
The problem is solved.
Go to step 3.
Remove and install the ISP. See 'Learn an Internal Solutions Port instal-' on page 235 for more information.
Is the ISP working correctly?
The problem is solved.
Contact Customer support.
Check the cable and ISP connection.
a Use the right cable and make sure it is securely connected to
locks on the ISP. b Check that the interface cable of the ISP solution is secure
connected to the controller card connection.
Is the ISP working correctly?
Try one or more of the solutions:

Try one or more of the solutions:
Try one or more of the solutions:
You can solve this problem by buying a cartridge with the region that matches the printer region, or buy a universal cartridge.
Universal or undefined region 0
North America (United States, Canada) 1
European Economic Area, Western Europe, Scandinavian countries, Switzerland 2
Asia and the Pacific 3
Other European countries, Middle East, Africa 5

The printer has detected that a supply or part of a brand other than Lexmark is installed in the printer.
Your Lexmark printer works best with original Lex Mark supplies and parts. When you use supplies or parts of other manufacturers, this may have a negative impact on the performance, reliability or lifetime of the printer and image processing components of the device.
All life indicators are designed to function with the supplies and parts Lexmark. If you use supplies or parts from other manufacturers, this may lead to unpredictable results. The use of image processing components longer than the intended lifetime can damage your Lexmark printer or its parts.
If you want to accept these risks and continue using non-original supplies or parts in your printer, keep them X and # Pressed on the control panel simultaneously for 15 seconds.
If you do not want to accept these risks, remove the supply or component of other manufacturers from your printer and replace it with an original supply or part of Lexmark. See 'Using Official Lexmark parts and supplies' on page 147 for more information.
If you: X and # Pressing 15 seconds at the same time and still cannot print the printer, you need to reset the user of supplies.
1 Browse the control panel to:
Institutions > Device > Maintenance > Configuration Menu > Consumption and counters of supplies
2 Select the component or supply you want to set up and then select Start.
3 Read warning message and then select Continue.
4 Hold X and # simultaneously press for 15 seconds to delete the message.
Go to step 2. The problem is solved.
a Use an envelope that is stored in a dry environment.
Is the envelope taped up while printing?
Solution of problems 188 · Action Yes No · Step 1

Contact Customer support.
The problem is solved.
a Make sure the paper type is set to Envelope.
Browse the control panel to: Institutions > Paper > Load Configuration > Paper Size/Type b Send the print job.
Is the envelope taped up while printing?
The problem is solved.
Go to step 2.
a From the start screen, go to Institutions > Print >
Classification > Sort. b Turn on Sort.
c Print the document.
Are the pages sorted correctly?
The problem is solved.
Go to step 3.
a Open the dialog from the document you want to print
Print and select Sort. b Print the document.
Are the pages sorted correctly?
The problem is solved.
Contact Customer support.
a Reduce the number of pages to print. b Print the document.
Are the pages sorted correctly?
The problem is solved.
Go to step 2.
a Check that the loading paper of the same size and the same
contain species. b Check that the paper guides are correctly placed.
c Print the document.
Are the drawers properly coupled?

The problem is solved.
Go to step 3.
a Browse the control panel to:
Institutions > Paper > Load Configuration > Paper Size/Type b Set the paper size and type of paper in the
Linked drawers. c Print the document.
Are the drawers properly coupled?
The problem is solved.
Contact Customer support.
a Focus Link Lade is set toAutomatic. See
Link Loading on page 30 for more information. b Print the document.
Are the drawers properly coupled?
Go to step 2. The problem is solved.
a Remove the drawer. b Check that the paper is correctly placed.
Do paper failures keep on happening regularly?
Go to step 3. The problem is solved.
a Browse the control panel to:
Institutions > Paper > Load Configuration > Paper Size/Type b Set the correct paper size and type of paper.
c Print the document.
Do paper failures keep on happening regularly?

Contact Customer support.
The problem is solved.
a Replace the paper. Use paper from a new suit.
Do paper failures keep on happening regularly?
a From the start screen, go to Institutions > Device >
The problem is solved.
Contact Customer support.
Notifications > Restore contents after malfunction. b Select To or Automatic.
c Apply the changes.
- Are the pages that have been blocked printed?
Empty or white pages

print quality. For printer models without touchscreen, press to navigate through the settings.

Go to step 2. The problem is solved.
a Check if the printer has an original and supported Lexmark-
toner cartridge used.
Is the printer printing empty or white pages?
Go to step 3. The problem is solved.
a Remove any remaining packaging from the
Image processing unit.
1 Remove the toner cartridge and then remove the image unit.
Is the printer printing empty or white pages?
Contact Customer support.
The problem is solved.
Check the toner cartridge status and replace it if necessary.
a Browse the control panel to:
Status/Supplies > Supplies b Print the document.
Is the printer printing empty or white pages?


print quality. For printer models without touchscreen, press to navigate through the settings.
Go to step 2. The problem is solved.
a Check if the printer has an original and supported Lexmark-
toner cartridge used.
Is the print dark?
Go to step 3. The problem is solved.
a Disable the printer and then switch off the printer
About 10 seconds back in. b Lower the set value for toner intensity. Browse on the
Control panel to:
Institutions > Print > Quality c Print the document.
Is the print dark?
Go to step 4. The problem is solved.
a Specify the paper type in Print Preferences or
in the Print dialog, depending on your operating system.
Is the print dark?

Go to step 5. Go to step 6.
Check whether the paper has structure or rough finish.
Do you print on paper with structure or rough finish?
Go to step 6. The problem is solved.
a Replace paper with structure by normal paper. b Print the document.
Is the print dark?
Go to step 7. The problem is solved.
a Replace the paper. Use paper from a new suit.
Is the print dark?
Go to step 8. The problem is solved.
a Remove the image processing unit and then place it
Again.
Is the print dark?
Contact Customer support.
The problem is solved.
a Replace the image processing unit. b Print the document.
Is the print dark?


print quality. For printer models without touchscreen, press to navigate through the settings.
Go to step 2. The problem is solved.
a Check if the printer has an original and supported Lexmark-
toner cartridge used.
Are accurate details not printed correctly?
Contact Customer support.
The problem is solved.
a Adjust the print quality settings.
1 Browse the control panel to:
Institutions > Print > Quality > Pixel reinforcement > Fonts 2 Set toner intensity to 7. Browse the control panel to:
Institutions > Print > Quality b Print the document.
Are accurate details not printed correctly?

print quality. For printer models without touchscreen, press to navigate through the settings.

Go to step 2. The problem is solved.
a Check if the printer has an original and supported Lexmark-
toner cartridge used.
Is the paper folded or wrinkled?
Go to step 3. The problem is solved.
a Replace the paper. Use paper from a new suit.
Is the paper folded or wrinkled?
Contact Customer support.
The problem is solved.
a Specify the paper type in Print Preferences or
in the Print dialog, depending on your operating system.
Is the paper folded or wrinkled?

print quality. For printer models without touchscreen, press to navigate through the settings.

Go to step 2. The problem is solved.
a Turn off the printer, wait about 10 seconds and switch on
printer back in. b Adjust toner intensity.
Browse the control panel to: Institutions > Print > Quality c Print the document.
Do printing contain a grey background?
Go to step 3. The problem is solved.
a Check if the printer has an original and supported Lexmark-
toner cartridge used.
Do printing contain a grey background?
Go to step 4. The problem is solved.
a Specify the paper type in Print Preferences or
in the Print dialog, depending on your operating system.
Do printing contain a grey background?
Step 4. Check the toner cartridge status and replace it if necessary.
Go to step 5. The problem is solved.
a Browse the control panel to:
Status/Supplies > Supplies b Print the document.
Do printing contain a grey background?

Go to step 6. The problem is solved.
a Remove the image processing unit.
Image processing unit.

Do printing contain a grey background?
Contact Customer support.
The problem is solved.
a Replace the image processing unit. b Print the document.
Do printing contain a grey background?

print quality. For printer models without touchscreen, press to navigate through the settings.

a Check if the printer has an original and supported Lexmark-
Contact Customer support.
The problem is solved.
toner cartridge used.
Do printing contain horizontal light stripes?

The problem is solved.
Go to step 2.
a Move the guides into the right position for the relevant
paper format. b Print the document.
Are the margins correct?
The problem is solved.
Contact Customer support.
a Specify the paper format via the Preference Settings dialog
print or print dialog depending on the operating system.
Are the margins correct?


print quality. For printer models without touchscreen, press to navigate through the settings.
Go to step 2. The problem is solved.
a Check if the printer has an original and supported Lexmark-
toner cartridge used.
Is the print light?
Go to step 3. The problem is solved.
a Disable the printer and then switch off the printer
About 10 seconds back in. b Adjust toner intensity. Browse the control panel to:
Institutions > Print > Quality c Print the document.
Is the print light?
Go to step 4. The problem is solved.
a Specify the paper type in Print Preferences or
in the Print dialog, depending on your operating system.
Is the print light?

Go to step 5. The problem is solved.
Check the toner cartridge status and replace it if necessary.
a Browse the control panel to:
Status/Supplies > Supplies b Print the document.
Is the print light?
Go to step 6. The problem is solved.
a Remove the toner cartridge and then remove the image processing device
Unit.
The king unit is sitting, to check that it is pressed and returns to the place.
NOTE: HOT SURFACE: The inside of the printer can be hot. To avoid injury, you should cool a hot surface before touching it. c If the transfer role is not pressed and returned to its
The Commission has already made a number of proposals.
1 Pull up one end of the transfer roller and press it down until it clicks. 2 Repeat the step for the other end if necessary. d Shake the image processing unit so that toner becomes equal
divided and put it back. e Place the toner cartridge.
f Turn off the printer, wait about 10 seconds and switch on
printer back in. g Print the document.
Is the print light?
Go to step 7. The problem is solved.
a If the problem arises after installing a new one
Maintenance kit, then check that the transfer roller included in the kit is installed.
Is the print light?

Go to step 8. Contact Customer support.
This allows you to check the status of the image processing unit. Browse the control panel to: Status/Supplies > Supplies
Is the image processing unit almost worn out?
Contact Customer support.
The problem is solved.
a Replace the image processing unit. b Print the document.
Is the print light?

print quality. For printer models without touchscreen, press to navigate through the settings.
Go to step 2. The problem is solved.
a Check if the printer has an original and supported Lexmark-
toner cartridge used.
Go to step 4. Go to step 3.
Check the printer for leakage of toners.
Isn't there a leak of toners in the printer?
Go to step 4. The problem is solved.
a Replace the toner cartridge. b Print the document.

Go to step 5. Contact Customer support.
This allows you to check the status of the image processing unit. Browse the control panel to: Status/Supplies > Supplies
Is the image processing unit almost worn out?
Contact Customer support.
The problem is solved.
a Replace the image processing unit. b Print the document.

print quality. For printer models without touchscreen, press to navigate through the settings.
Go to step 2. The problem is solved.
a Check if the printer has an original and supported Lexmark-
toner cartridge used.
Is the paper curled over?
Go to step 3. The problem is solved.
a Slide the guides in the drawer to the right position for paper
In the drawer. b Print the document.
Is the paper curled over?

Go to step 4. The problem is solved.
a Specify the paper type and format settings in the dialog-
Preferred Print or Printing Settings window, depending on the operating system.
Is the paper curled over?
Go to step 5. The problem is solved.
a Remove the paper from the drawer and turn it around. b Print the document.
Is the paper curled over?
Go to step 6. The problem is solved.
a Replace the paper. Use paper from a new suit.
Is the paper curled over?
Contact Customer support.
The problem is solved.
a Check that the paper entered is supported.
Is the paper curled over?


print quality. For printer models without touchscreen, press to navigate through the settings.
Go to step 2. The problem is solved.
a Slide the guides in the drawer to the right position for paper
In the drawer. b Print the document.
Is the print oblique or crooked?
Go to step 3. The problem is solved.
a Check that the paper entered is supported.
Is the print oblique or crooked?
Contact Customer support.
The problem is solved.
a Check the dial in the input tray for damage and replace
This one if necessary. b Print the document.
Is the print oblique or crooked?

print quality. For printer models without touchscreen, press to navigate through the settings.

Step 1 Using the print quality test pages, you can check whether the distance between recurring failures is equal to one of the following:
Go to step 2. Note the distance and contact Customer support.
Does the distance between recurring failures correspond to any of the dimensions?
Contact Customer support.
The problem is solved.
a Replace the image processing unit. b Print the document.
Do printing contain repeated malfunctions?

print quality. For printer models without touchscreen, press to navigate through the settings.
Go to step 2. The problem is solved.
a Check if the printer has an original and supported Lexmark-
toner cartridge used.
Is the printer printing plain black pages?

Go to step 3. The problem is solved.
a Remove the image processing unit and then place it
Again.
Is the printer printing plain black pages?
Go to step 4. The problem is solved.
a Remove the image processing unit.
Image processing unit.
Is the printer printing plain black pages?
Contact Customer support.
Go to step 5.
Check the image processing unit for damage.
Isn't the image processing unit damaged?
Contact Customer support.
The problem is solved.
a Replace the image processing unit. b Print the document.
Is the printer printing plain black pages?


print quality. For printer models without touchscreen, press to navigate through the settings.
Go to step 2. The problem is solved.
a Check if the printer has an original and supported Lexmark-
toner cartridge used.
Are text or images cut off?
Go to step 3. The problem is solved.
a Remove the image processing unit and then place it
Again.
Are text or images cut off?

Go to step 4. The problem is solved.
a Remove the image processing unit.
Image processing unit.
Are text or images cut off?
Contact Customer support.
The problem is solved.
a Replace the image processing unit. b Print the document.
Are text or images cut off?

print quality. For printer models without touchscreen, press to navigate through the settings.

Go to step 2. The problem is solved.
a Check if the printer has an original and supported Lexmark-
toner cartridge used.
Easy to let go of the toner?
Contact Customer support.
The problem is solved.
a Specify the paper type in Print Preferences or
in the Print dialog, depending on your operating system.
Easy to let go of the toner?

print quality. For printer models without touchscreen, press to navigate through the settings.
Go to step 2. The problem is solved.
a Check if the printer has an original and supported Lexmark-
toner cartridge used.
Are prints still containing vertical dark stripes?

Go to step 3. The problem is solved.
a Remove the toner cartridge and then remove the image processing device
Unit.
c Print the document.
Are prints still containing vertical dark stripes?
Go to step 4. The problem is solved.
a Remove the image processing unit.
Image processing unit.
Are prints still containing vertical dark stripes?
Contact Customer support.
The problem is solved.
a Check if bright light enters the right side of the printer
and move the printer if necessary. b Print the document.
Are prints still containing vertical dark stripes?


Go to step 3. Go to step 2.
a Browse the control panel to:
Institutions > Troubleshooting > Clean the scanner b Print the document.
Do vertical dark lines or stripes appear in prints?
Contact Customer support.
The problem is solved.
a Wipe the scanner with a damp, soft, lint-free cloth.
See Clean the scanner on page 144 for more information. b Copy the document with the ADF.
Do vertical dark lines or stripes appear in prints?
Go to step 4. The problem is solved.
a Check if the printer has an original and supported Lexmark-
toner cartridge used.
Do vertical dark lines or stripes appear in prints?
Go to step 5. The problem is solved.
a Remove the image processing unit and then place it
Again.
Do vertical dark lines or stripes appear in prints?

Contact Customer support.
The problem is solved.
a Replace the image processing unit. b Print the document.
Do vertical dark lines or stripes appear in prints?

print quality. For printer models without touchscreen, press to navigate through the settings.
Go to step 2. The problem is solved.
a Remove the image processing unit.
Image processing unit.
Do printing still contain vertical dark lines and missing images?

Contact Customer support.
The problem is solved.
a Check if the printer has an original and supported Lexmark-
toner cartridge used.
Do printing still contain vertical dark lines and missing images?

print quality. For printer models without touchscreen, press to navigate through the settings.
Contact Customer support.
The problem is solved.
a Check if the printer has an original and supported Lexmark-
toner cartridge used.
Are printing still containing vertical light stripes?


print quality. For printer models without touchscreen, press to navigate through the settings.
Go to step 2. The problem is solved.
a Check if the printer has an original and supported Lexmark-
toner cartridge used.
Do printing contain vertical white lines?
Contact Customer support.
The problem is solved.
a Specify the paper type in Print Preferences or
in the Print dialog, depending on your operating system.
Do printing contain vertical white lines?
The problem is solved.
Go to step 2.
a Check the control panel or documents in the list
display with waiting tasks.
Are the documents printed?

The problem is solved.
Go to step 3.
The print job may contain a formatting error or invalid data.
Are the documents printed?
Step 3. If you print from the internet, it may be that the printer reads multiple job names as duplicates.
The problem is solved.
Go to step 4.
a Open the Print Preferences dialog. b Select Keep duplicate documents in the Print-
and waiting duties. c Enter a PIN. d Send the print job again.
a Save each task separately and give it a unique name. b Send the task separately.
Are the documents printed?
The problem is solved.
Go to step 5.
a Remove some tasks in queue to free printer memory
The Commission has already taken a decision on this matter. b Send the print job again.
Are the documents printed?
The problem is solved.
Contact Customer support.
a Add printer memory. b Send the print job again.
Are the documents printed?
Go to step 2. The problem is solved.
a Make sure the printer is not in Ecomode or Silent Mode
The first step is to reduce the risk of infection. b Print the document.
Is the printer still that slow with prints?

Go to step 3. The problem is solved.
a Specify the paper type in Print Preferences or
in the Print dialog, depending on your operating system.
Is the printer still that slow with prints?
Go to step 4. The problem is solved.
a Reduce the number of pages to print. b Print the document.
Is the printer still that slow with prints?
Go to step 5. The problem is solved.
a Connect the printer cable firmly to the printer and computer,
print server, option or other network device. b Print the document.
Is the printer still that slow with prints?
Go to step 6. The problem is solved.
a Set the print resolution to 600 dpi in the Quality menu on the
Control panel. b Print the document.
Is the printer still that slow with prints?
Go to step 7. The problem is solved.
a Check that the printer does not overheat.
Is the printer still that slow with prints?
Contact Customer support.
The problem is solved.
a Add more printer memory. b Print the document.
Is the printer still that slow with prints?

The problem is solved.
Go to step 2.
a Open the dialog from the document you want to print
Print and check that you have selected the correct printer. b Print the document.
Is the document printed?
The problem is solved.
Go to step 3.
a Check that the printer is enabled. b Fix the error messages that appear on the display.
c Print the document.
Is the document printed?
The problem is solved.
Go to step 4.
a Check that the gates are working and that the cables are securely mounted.
Locks on the computer and printer.
For more information, please refer to the printer installation documentation provided. b Print the document.
Is the document printed?
The problem is solved.
Go to step 5.
a Disable the printer and then switch off the printer
About 10 seconds back in. b Print the document.
Is the document printed?
The problem is solved.
Contact Customer support.
a Remove the printer driver and reinstall it. b Print the document.
Is the document printed?
1 From the start screen, go to Institutions > Print > Quality.
2 Adjust the toner intensity.
3 Apply the changes.

Step 1 Check that the power cord is connected to the socket.
The problem is solved.
Go to step 2.
PLEASE NOTE: RISK OF INJURY: To avoid the risk of electric shocks or fire, you need to connect the power cord directly to a grounded outlet close to the product and which is easily accessible.
Step 2 Check that the power outlet is switched off using a switch or circuit breaker.
Turn on the switch or reset the circuit breaker.
Go to step 3.
Is the power outlet switched off using a switch or circuit breaker?
Go to step 4. Turn on the printer.
Check that the printer is enabled.
- Is the printer enabled?
Press the On/Off button to turn on the printer.
Go to step 5.
Check that the printer is in sleep or slumber mode.
Is the printer in sleep or slumber mode?
Step 5. Check that the cables with which the printer is connected are in correct ports.
Go to step 6. Place the cables in the correct ports.
Are the cables in the correct ports?
Step 6. Turn off the printer, install hardware options and turn on the printer.
The problem is solved.
Go to step 7.
Please refer to the documentation provided by the printer for more information.
Step 7. Install the correct printer driver.
The problem is solved.
Go to step 8.
Step 8 Turn off the printer and then turn on the printer after about 10 seconds.
The problem is solved.
Contact Customer support.

Go to step 2. Place the right paper size and type of paper.
a Check that you print on the right paper. b Print the document.
Is the document printed on the right paper?
The problem is solved.
Go to step 3.
a Specify the paper type and format settings in the dialog-
Preferred Print or Printing Settings window, depending on the operating system.
Institutions > Paper > Load Configuration > Paper Size/Type b Make sure the settings match the paper that is
Placed. c Print the document.
Is the document printed on the right paper?
The problem is solved.
Contact Customer support.
a Check that the drawers are connected.
See 'Link Loading' on page 30 for more information. b Print the document.
Is the document printed from the correct drawer?
Step 1 Fix the error messages that appear on the display.
The problem is solved.
Go to step 2.
Can you send or receive a fax?
Step 2 Check that the cables of the following devices are well connected:
The problem is solved.
Go to step 3.
Can you send or receive a fax?

Go to step 5. Go to step 4.
Listen to me, if you hear a dial tone.
Do you hear a dial tone?
Step 4. Check the phone connection in the wall.
The problem is solved.
Go to step 5.
a Connect the analogue phone directly to the wall socket
On. b Listen to me, if you hear a dial tone.
c If you do not hear a dial tone, use another telephone cable. d If you still don't hear a dial tone, close the analogue phone
on another wall socket. e If you hear a dial tone, close the printer on that wall socket
On.
Can you send or receive a fax?
Step 5. Check if the printer is connected to an analogue telephone service or to the correct digital connector.
The problem is solved.
Go to step 6.
Can you send or receive a fax?
Step 6. Disconnect other equipment temporarily and disable other telephone services.
The problem is solved.
Go to step 7.
a Unplug other devices (such as answering machines,
computers, modems or telephone line splitters) between the printer and the phone line. b Disable the call switch and voicemail. Contact
with your phone company for more information.
Can you send or receive a fax?
Solution problems 221 · Action Yes No · Step 3.

The problem is solved.
Contact Customer support.
Scan the original document page for page.
a Choose the fax number. b Scan the document.
Can you send or receive a fax?
The problem is solved.
Go to step 2.
Place the original document correctly in the ADF drawer or on the glass plate.
Can you send faxes?
The problem is solved.
Contact Customer support.
Set the shortcut number correctly.
Can you send faxes?
Step 1 Make sure the drawer or universal charger is not empty.
The problem is solved.
Go to step 2.
Can you get faxes?
Step 2 Check the settings for maximum number of call signals.
The problem is solved.
Go to step 3.
a Hit in the home screen Institutions > Fax > Analog Fax Setting-up
lings > Fax reception settings > Number of call signals On. b Adjust the setting if necessary.
Can you get faxes?
Step 3. Replace the toner cartridge.
The problem is solved.
Contact Customer support.
Please refer to the instructions in the supply for more information.
Can you get faxes?

Step 1 Improve print quality.
The problem is solved.
Go to step 2.
a Hit in the home screen Institutions > Print > Quality On. b Adjust the settings.
Is the fax print quality okay?
The problem is solved.
Go to step 3.
Lower the fax transmission rate for incoming faxes.
a Hit in the home screen Institutions > Fax > Analog Fax Setting-up
Lings > Fax reception institutions > Admin controls > Max. speed On. b Select a lower transfer rate.
Is the fax print quality okay?
The problem is solved.
Contact Customer support.
Replace the toner cartridge. Please refer to the instructions in the supply for more information.
Is the fax print quality okay?
The problem is solved.
Go to step 2.
a Disable printer and turn off printer after about ten
seconds back in. b Send the scan job again.
Can you send the scan job?
The problem is solved.
Contact Customer support.
a Make sure the cables between printer and print server are correct
have been confirmed. For more information, please refer to the printer installation documentation provided. b Send the scan job again.
Can you send the scan job?


a Make sure the document or picture with the printed side
is placed down in the upper left corner of the glass plate. b Copy the document or photo.
a Make sure the paper size setting matches the
paper placed in the drawer. b Copy the document or photo.

a Clean the glass plate and ADF glass plate with a damp, soft
Fluff-free cloth. If your printer has a second ADF glass plate in the ADF, you should also clean that glass plate.
See Clean the scanner on page 144 for more information. b Make sure the document or picture with the printed side
is placed down in the upper left corner of the glass plate. c Copy the document or photo.
a Check the quality of the original document or photo. b Adjust the scanning quality settings.
ABCDE ABBCTE AB CDE
Troubleshooting 224 · Leading edge · Trailing edge

Go to step 2. The problem is solved.
a Open the valve of the scanner. b Wipe the glass of ADI with a damp, soft, lint-free cloth
and the white underside of the impact of the ADI clean. c Close the scanner valve.
Are vertical stripes still appearing on scanned documents?
Contact Customer support.
The problem is solved.
a Open valve C. b Wipe the glass of ADI with a damp, soft, lint-free cloth
and the white underside of the impact of the ADI clean. c Close the valve.
Are vertical stripes still appearing on scanned documents?
The problem is solved.
Go to step 2.
Check the cable connection.
a Make sure the Ethernet or USB cable is properly installed on your computer
and is connected to the printer. b Send the scan job again.
Did the scan job pass?
The problem is solved.
Go to step 3.
Check the file you want to print.
a Make sure that the filename is not already used in
destination directory. b Make sure that the document or photo you want to scan is not in
another application has been opened. c Send the scan job again.
Did the scan job pass?
The problem is solved.
Contact Customer support.
a Make sure that Add Timestamp or Overwrite existing
file is selected in the destination configuration settings. b Send the scan job again.
Did the scan job pass?

Remove any blockage that will keep the scanner unit open.
The problem is solved.
Contact Customer support.
Is the scanner unit well closed?
Close all applications that disrupt the scan.
Contact Customer support.
The problem is solved.
Is scanning too long or is the computer jammed?
The problem is solved.
Go to step 2.
a Check that the power cord is correctly on the printer and socket
is connected.
PLEASE NOTE: RISK OF INJURY: To avoid the risk of electric shocks or fire, you need to connect the power cord directly to a grounded outlet close to the product and which is easily accessible. b Copy or scan the document.
The problem is solved.
Go to step 3.
a Check that the printer is enabled. b Fix the error messages that appear on the display.
c Copy or scan the document.
The problem is solved.
Contact Customer support.
a Disable printer and turn off printer after about ten
seconds in. b Copy or scan the document.
1 From the start screen, go to Institutions > Device > Maintenance > Configuration Menu > Scanner Configuration > Manual scanner registration.
2 Press Start in the Quick Printtest menu.

3 Place the test page on the glass plate and hit Flatbed Registration On.
4 Press Start in the Quick Copy Test menu.
5 Compare the copy test page with the original document.
6 Repeat step 4 and step 5 to the margins of the copy test page as close as match the original document.
1 From the start screen, go to Institutions > Device > Maintenance > Configuration Menu > Scanner Configuration > Manual scanner registration.
2 Press Start in the Quick Printtest menu.
3 Place the printed test page on the ADF drawer.
4 Touch Registration ADF front or Registration ADF rear On.
5 Press Start in the Quick Copy Test menu.
6 Compare the copy test page with the original document.
7 Repeat step 5 and step 6 to the margins of the copy test page as close as match the original document.
Before contacting customer support, make sure you have the following information:
Go http://support.lexmark.com for support by email or via chat, or browse the library of manuals, supporting documentation, drivers and other downloads.
Technical support via the phone is also available. In the US or Canada, call 1-800-539-6275. Go to other countries or regions http://support.lexmark.com.
Solving problems 227

Upgrade and migrate 228
Hardware
Access the controller card.
NOTE: DANGER OF ELECTRIC SHOCKS: If you want access to the controller card or install optional hardware or memory devices after setting up the printer, turn off the printer and pull the plug before continuing in order to avoid risk of electric shocks. If you have connected other devices to the printer, disable them and unplug the cables from the printer.
1 Turn off the printer.
2 Pull the plug from the power cord and remove the power cable from the printer.
3 Open the controller card access valve using a flat-head screwdriver.

Upgrade and migrate 229

4 Close the access valve.
5 Connect the power cord to the printer and then connect it to an outlet.
PLEASE NOTE: RISK OF INJURY: Connect the power cord to a grounded outlet close to the product and easily accessible to prevent fire or electric shocks.
6 Turn on the printer.

Upgrade and Migrate 230
NOTE: DANGER OF ELECTRIC SHOCKS: If you want access to the controller card or install optional hardware or memory devices after setting up the printer, turn off the printer and pull the plug before continuing in order to avoid risk of electric shocks. If you have connected other devices to the printer, disable them and unplug the cables from the printer.
1 Turn off the printer.
2 Pull the plug from the power cord and remove the power cable from the printer.
3 Open the access valve of the controller card.

Upgrade and migrate 231
4 Remove the memory card from the package.
5 Place the memory card until it clicks.

6 Close the access valve to the controller card.
7 Connect the power cord to the printer and then connect it to an outlet.
PLEASE NOTE: RISK OF INJURY: Connect the power cord to a grounded outlet close to the product and easily accessible to prevent fire or electric shocks.
8 Turn on the printer.
NOTE: DANGER OF ELECTRIC SHOCKS: If you want access to the controller card or install optional hardware or memory devices after setting up the printer, turn off the printer and pull the plug before continuing in order to avoid risk of electric shocks. If you have connected other devices to the printer, disable them and unplug the cables from the printer.
1 Turn off the printer.
2 Pull the plug from the power cord and remove the power cable from the printer.
3 Open the access valve of the controller card.

Upgrade and migrate 232
4 Remove the optional card from the package.

Upgrade and migrate 233
5 Press the card firmly in place.

6 Close the access valve.
7 Connect the power cord to the printer and then connect it to an outlet.
PLEASE NOTE: RISK OF INJURY: Connect the power cord to a grounded outlet close to the product and easily accessible to prevent fire or electric shocks.
8 Turn on the printer.
NOTE: DANGER OF ELECTRIC SHOCKS: If you want access to the controller card or install optional hardware or memory devices after setting up the printer, turn off the printer and pull the plug before continuing in order to avoid risk of electric shocks. If you have connected other devices to the printer, disable them and unplug the cables from the printer.
1 Turn off the printer.
2 Pull the plug from the power cord and remove the power cable from the printer.
3 Open the access valve of the controller card.

Upgrade and migrate 234
4 Remove the hard drive from the package.
5 Confirm hard disk on the controller card.

Upgrade and migrate 235

6 Connect the hard drive interface cable to the controller card.

7 Close the access valve.
8 Connect the power cord to the printer and then connect it to an outlet.
PLEASE NOTE: RISK OF INJURY: Connect the power cord to a grounded outlet close to the product and easily accessible to prevent fire or electric shocks.
9 Turn on the printer.
NOTE: DANGER OF ELECTRIC SHOCKS: If you want access to the controller card or install optional hardware or memory devices after setting up the printer, turn off the printer and pull the plug before continuing in order to avoid risk of electric shocks. If you have connected other devices to the printer, disable them and unplug the cables from the printer.
1 Turn off the printer.
2 Pull the plug from the power cord and remove the power cable from the printer.
3 Unpack the internal solutions port (ISP) kit.

Upgrade and migrate 236

4 Install the ISP in the enclosure.

5 Attach the ISP and insert the IPS extension cable.


Upgrade and migrate 237
6 Open and remove the access valve from the controller card.

7 Attach the ISP kit to the printer.


Upgrade and migrate 238
If a hard drive is installed, delete the hard drive before installing the ISP.
a Unplug the hard drive interface cable from system card.


Upgrade and migrate 239
b Connect the ISP extension cable to the IPS connection.


Upgrade and migrate 240
c Install the hard drive.


Upgrade and migrate 241
8 Close the access valve.
9 Connect the power cord to the printer and then connect it to an outlet.
PLEASE NOTE: RISK OF INJURY: Connect the power cord to a grounded outlet close to the product and easily accessible to prevent fire or electric shocks.
10 Turn on the printer.
NOTE: DANGER OF ELECTRIC SHOCKS: If you want access to the controller card or install optional hardware or memory devices after setting up the printer, turn off the printer and pull the plug before continuing in order to avoid risk of electric shocks. If you have connected other devices to the printer, disable them and unplug the cables from the printer.
1 Turn off the printer.
2 Pull the plug from the power cord and remove the power cable from the printer.
3 Unpack the optional tray and remove all packaging material.
4 Adjust the printer with the optional tray and lower the printer until it clicks.
PLEASE NOTE: RISK OF INJURY: If the printer weighs more than 18 kg (40 lb), it must be moved by two or more trained staff.
5 Connect the power cord to the printer and then connect it to an outlet.
PLEASE NOTE: RISK OF INJURY: To avoid the risk of electric shocks or fire, you need to connect the power cord directly to a grounded outlet close to the product and which is easily accessible.
6 Turn on the printer.

Upgrade and migrate 242
Add the drawer to the printer driver to make it available for printing tasks. See 'Add available options of the printer driver' on page 242 for more information.
2 Run the installer and follow the instructions on the computer display.
3 For Macintosh users: add the printer.
For Windows users
1 Open the printer folder.
3 Navigate to the Configuration tab and then select Update now - Printer questions.
4 Apply the changes.
1 Navigate via System Preferences in the Apple menu to your printer and then select Options and supplies.
2 Navigate to the list of hardware options and then add any installed options.
3 Apply the changes.
You can export the configuration settings of your printer to a text file and then import this file to apply the settings on other printers.
1 Open a web browser and type the printer IP address in the address bar.

Upgrade and migrate 243
2 Export or import a configuration file for one or more applications.
a Click on the Embedded Web Server Apps > the application you want > Configure. b Click on Export or Import.
a Click on Embedded Web Server Export Configuration or Import Configuration. b Follow the on-screen instructions.
Some applications require a minimum level of device firmware to make the device work properly.
Contact your Lexmark supplier for more information about updating the device firmware.
1 Click on the Embedded Web Server Institutions > Device > Update firmware.
2 Browse for the desired flash file.
3 Apply the changes.

Product information
Product name:
Lexmark MB2650ade, Lexmarket MB265ADwe; Lex Mark MX622ade,Lexmark MX622adhe; Lxmark XM3250 MFPs
Device type:
Models:
676, 678, 679, 686
The following paragraph shall not apply to countries where the conditions are contrary to national law: LEXMARK INTERNATIONAL, INC., THIS PUBLICATION AS SUCH PROVIDES WITHOUT ANY FORM OF GUARANTEE, NEITHER IMPLIED NOR EXPLICIT, INCLUDING BUT NOT LIMITED TO THE IMPLICIT GUARANTEES OF MERCHANTABILITY OR SUITABILITY FOR A PARTICULAR PURPOSE. In some jurisdictions, rejection of explicit or implied guarantees is not permitted in certain transactions, so this statement may not apply to you.
This publication may contain technical inaccuracies or typographical errors. The information contained in this publication is regularly reviewed, changes will be included in subsequent expenditure. The products or programmes described may be improved or modified at any time.
References in this publication to products, programmes or services do not imply that the manufacturer intends to place these products on the market in all countries where the manufacturer is active. A reference to a product, program or service does not mean that only that product, programme or service can be used. Instead, all functionally equivalent products, programmes or services, which do not infringe existing intellectual property rights, may be used. The user shall be responsible for the evaluation and control of operation in conjunction with other products, programmes or services, except those products, programs or services specified by the manufacturer.
Go http://support.lexmark.com for technical support of Lexmark.
Go www.lexmark.com for information on supplies and downloads.
© 2018 Lexmark International, Inc.
All rights reserved.
Lexmark and the Lex mark logo are trademarks of Lex Mark International, Inc., filed in the United States and/or other countries.
Notifications 244 · September 2018

Google Cloud Print and Googel Chrome are trademarks of Goobook Inc. Android and Google Play are trademarks of Goobook LLC.
Macintosh, Mac App Store and Safari are trademarks of Apple Inc. AirPrint and the AirPrint logo are trademarks of Apple, Inc.
Microsoft, Windows and Internet Explorer are registered trademarks or trademarks of the Microsoft business group in the United States and other countries.
Mopria®, the Mopria® logo and the Mopri® Alliance logo are registered trademarks and service marks of Mopria Alliance, Inc. in the United States and other countries. Unauthorized use is strictly prohibited.
PCL® is a registered trademark of Hewlett-Packard Company. PCL is an indication of Hewlett- Packard Company for a collection of printer assignments (printer language) and functions in its products. This printer is designed to support the PCL language. The printer recognizes PCL commands used in various applications and emulates the functions corresponding to these commands.
PostScript is a registered trademark of Adobe Systems Incorporated in the United States and other countries.
Other trademarks are the property of their respective owners.
AirPrint and the logo of AirPrint are trademarks of Apple, Inc.
You can read all license notifications associated with this product from the CD:\KNOWINGS directory of the installation software CD.
The following measurements are made in accordance with ISO 7779 and reported according to ISO 9296.
Noise pressure on average 1 m, dBA
Scanning 56
Copying 56
Values can be changed. Go www.lexmark.com for current values.
Notifications 245 · Completed 14

The WEEE logo indicates that there are specific recycling programmes and procedures for electronic products in the countries of the European Union. We ask you to recycle our products.
If you have further questions about recycling options, please visit Lexmark's website at www.lexmark.com for the phone number of your local supplier.
Do not throw away the printer or components with household waste. Contact your municipality for disposal and recycling options.
This symbol indicates components sensitive to static electricity discharge. Touch parts in the areas listed below only after touching a metal surface outside of the area with the symbol.
To prevent damage by electrostatic discharge when performing maintenance tasks such as solving paper failures or replacing supplies, touch a exposed metal frame of the printer before doing anything with the inside of the Printer even if there is no symbol.
All Lexmark products with the ENERGY STAR logo on the product or on a home screen are certified in accordance with EPA's ENERGY STAR requirements, if the configuration set by Lex Mark still applies.
Notifications 246

Ambient temperature 10 to 32°C
Temperature for transport -20 to 40 °C
Temperature for storage and relative humidity 0 to 40 °C
8 to 80% RH
The printer is certified in the United States as a product that meets the requirements of DHHS 21 CFR Chapter 1, Subpart J for Class I (1) laser products. Elsewhere, the printer is certified as a class I laser product that meets the requirements of IEC 60825-1: 2014.
Class I laser products shall be considered as not presenting any danger. The printer contains an internal class IIIb laser (3b) AlGaInP with a rated power of 15 milliwatts in a wavelength range of 650-670 nanometers in a non-usable print head unit. The laser system and printer are designed to ensure that users never experience laser radiation higher than the permitted level for Class I devices, during normal use, maintenance work by the user or prescribed service activities.
The following table describes the printer's energy consumption characteristics.
Mode Description Power consumption (Watt)
Printing
Paper copies of electronic imports shall be made with the product.
670 Single-sided; 410 (double-sided)
Copying Paper copies of paper originals are made with the product.
Scan Paper originals are scanned with the product. 23.5
Ready The product is waiting for a printing job. 16.5
Sleep Mode The normal device save mode is activated. 2.5
Snooze mode The optimal energy savings of the device is activated. 0.1
The product is connected to an outlet, but the device is switched off.
The energy consumption levels shown in the previous table indicate measurements of average times. Immediate energy reductions can be substantially higher than the average.
Values can be changed. Go www.lexmark.com for current values.
Notifications 247 · 0.1

This product has an energy-saving mode called sleep mode. In sleep mode, energy is saved by reducing power consumption during longer periods of time when the device is not active. The sleep mode is automatically switched on when the product is not used for a pre-set period (timeout for sleep mode).
Standard setting for the time-out of this product (in minutes): 15
You can set the time-out for sleep mode from configuration menus between 1 minute and 120 minutes. If you set the sleep timeout to a low value, energy consumption will decrease but product response times may increase. When you set the time-out for sleep mode to a high value, the printer reacts quickly but more energy is consumed.
This product has a mode in which it consumes very little energy called slumber mode. If the printer's slumber mode is active, other systems and devices will be switched off safely.
You can use the following methods to enable slumber mode:
The standard slumber mode time-out for this product in all countries or regions 3 days
You can set the time period that the printer waits for before the slumber mode is enabled after a task has been printed between one hour and one month.
If this product has a power-off mode but still consumes a small amount of energy and you want to stop the product's electricity consumption completely, pull the plug on the product from the socket.
It is sometimes useful to calculate the total energy consumption of the product. As the power consumption is indicated in watts, the current consumption should be multiplied by the time that each mode is active on the product. This way you can calculate the energy consumption. The total energy consumption of the product is the sum of the energy consumption for all modes.
This section contains information on the regulatory framework for products with analog fax function:
Lexmark regulated type/model number:
Notifications 248

This section contains information on regulation that applies only to wireless models.
If you have doubts as to whether your model is a wireless model, please go http://support.lexmark.com.
Wireless models contain one of the following modular components:
Lexmark regulated type/model number LEX-M07-001; FCC ID:IYLLEXM07001; Industry Canada IC:2376A- LEXM07001 Lex mark regulated type /model number LEX-M08-001, FCC id:IylLEXM08001; IC:2376A-LEXM080001
To determine which modular components are installed in your specific product, please refer to the labels on the product.
The amount of high frequency energy emitted by this wireless device is well below the limits for high frequency power set by the FCC and other regulatory authorities. There shall be a minimum of 20 cm (8 inch) space between the antenna and any person to meet the requirements for high frequency energy from the FCC and other regulatory authorities.
This product complies with the safety requirements of Council Directive 2014/53/EU on the approximation of Member States' laws relating to radio equipment.
The manufacturer of this product is: Lexmark International, Inc., 740 West New Circle Road, Lexington, KY, 40550, United States. The recognised representative is: Lexmark International Technology Hungária Kft., 8 Lechner Ödön fasor, Millennium Tower III, 1095 Budapest HUNGARY. A declaration of conformity to the requirements of the regulations may be obtained on request from the approved representative or www.lexmark.com/en us/about/regulatory-compliance/european-union-declaration-of-conformity.html.
The CE sign indicates that a device complies with the safety requirements:
radio frequency capability
This radio product emits in the 2.4 GHz (2.412 - 2,472 GHz band) across the EU. The maximum output power of the transmitter, including antenna reinforcement, is ≤ 20 dBm.
Notifications 249

This product complies with the safety requirements of Council Directives 2014/30/EU, 2014/35/EU and 2011/65/EU on harmonisation of Member States' laws relating to electromagnetic compatibility and safety of electrical equipment designed for use within certain voltage limits, energy efficiency of products consuming energy and restriction of the use of certain hazardous substances in electrical and electronic equipment.
The manufacturer of this product is: Lexmark International, Inc., 740 West New Circle Road, Lexington, KY, 40550, United States. The recognised representative is: Lexmark International Technology Hungária Kft., 8 Lechner Ödön fasor, Millennium Tower III, 1095 Budapest HUNGARY. A declaration of conformity to the requirements of the regulations may be obtained on request from the approved representative or www.lexmark.com/en us/about/regulatory-compliance/european-union-declaration-of-conformity.html.
This product meets the requirements of EN55022 and EN55032 with regard to Class A products and safety requirements of either EN 60950-1 or EN 62368-1.
This product meets the emission requirements of EN55022 and EN55032 with respect to Class A products limits and EN55024 immunity requirements. This product is not intended for use in residential environments.
This is a class A product. In a home environment, this product may cause radio interference, in which case the user may need to take appropriate measures.
Notifications 250






Pages referenced in this manual — manufacturer, support and downloads.
Owners and our team usually reply within a day — and your question helps the next person too.
Be the first to ask — other owners or our team will answer.