
User Manual
Machine type(s):
Models:
630, 670, 675


Safety information 7
Conventions
LET OP: Note indicates a potentially dangerous situation that can cause personal injury.
Examples of such warnings are:
PLEASE NOTE: RISK OF INJURY: Danger of injury.
NOTE: DANGER OF ELECTRIC SHOCKS: Risk of electric shock.
NOTE: HOT SURFACE: Risk of burning in contact.
NOTE: TILT RISK: - Smell danger.
PLEASE NOTE: RISK OF INJURY: To avoid the risk of electric shocks or fire, you need to connect the power cord directly to a grounded outlet close to the product and which is easily accessible.
PLEASE NOTE: RISK OF INJURY: You must not use this product with extension cords, plug boxes, distributors or UPS devices. The power capacity of this type of accessories can easily be exceeded by a laser printer, which can lead to poor printer performance, property damage or fire.
NOTE: DANGER OF ELECTRIC SHOCKS: To avoid the risk of electric shocks, do not place or use this product near water or damp locations.
PLEASE NOTE: RISK OF INJURY: This product uses a laser. The use of other modes, methods or procedures than those mentioned in the User's Manual may result in exposure to hazardous radiation.
This product uses a printing process that heats the print material. The heat can cause the printing material to release certain substances. Study the section in the operating instructions that discuss guidelines for selecting printing materials to prevent harmful emissions.
PLEASE NOTE: RISK OF INJURY: The lithium battery in this product should not be replaced. If the lithium battery is not properly replaced, there is an explosion risk. A lithium battery shall not be recharged, disassembled or incinerated. Dispose of used lithium batteries as instructed by the manufacturer and keep in mind local regulations.
NOTE: HOT SURFACE: The inside of the printer can be hot. To avoid injury, you should cool a hot surface before touching it.
PLEASE NOTE: RISK OF INJURY: The printer weighs more than 18 kg and must be lifted by two or more trained staff.

Safety information 8
PLEASE NOTE: RISK OF INJURY: Use only the power cord supplied with this product or a replacement component approved by the manufacturer to prevent fire or electric shocks.
PLEASE NOTE: RISK OF INJURY: Use to reduce the risk of fire only a telecommunication cord (RJ-11) of 26 AWG or more if you connect this product to the public fixed telephone network. For users in Australia, the cord should be approved by the Australian communication and media authority.
NOTE: DANGER OF ELECTRIC SHOCKS: If you want to access the controller card or install optional hardware or memory devices after setting up the printer, turn off the printer and pull the plug before continuing. If you have other devices connected to the printer, turn it off and unplug the cables from the printer.
NOTE: DANGER OF ELECTRIC SHOCKS: To avoid the risk of electric shocks, make sure that all external connections (such as Ethernet and telephone system connections) are correctly placed in marked ports.
This product has been developed, tested and approved together with specific components of the manufacturer according to strict safety standards applicable worldwide. The safety features of certain components are not always clearly visible. The manufacturer shall not be responsible for the use of other replacement parts.
PLEASE NOTE: RISK OF INJURY: You should not cut, rotate, tie, pinch or place heavy objects on the cord. Make sure that no abrasions can occur on the power cord or pressure is placed on the cable. Make sure the power cord doesn't get entangled between two objects, like a piece of furniture and a wall. If any of these things happen, there's a chance of fire or electric shocks. Check the power cord regularly for such problems. Pull the power cord plug out of the socket before checking the power cable.
Have maintenance and repair operations not described in the user documentation carried out by a service representative.

Safety information 9
NOTE: TILT RISK: For configurations on the ground, additional components are needed to promote stability. If you are using multiple input options, use a printer default or a printer base. You may also need additional parts for a multifunctional printer (MFP) that allows you to scan, copy and fax. See www.lexmark.com/multifunctionprinters for more information.
PLEASE NOTE: RISK OF INJURY: Make sure to place paper separately in each tray to prevent equipment instability. Keep all other drawers closed until you need them.
NOTE: DANGER OF ELECTRIC SHOCKS: To avoid the risk of electric shocks, you should not turn this product on during thunderstorm and do not connect electrical cables or power lines such as a fax cord, mains cable or telephone cable.
NOTE: DANGER OF ELECTRIC SHOCKS: Do not use the fax function during thunderstorms to prevent electric shock.
NOTE: DANGER OF ELECTRIC SHOCKS: To avoid the risk of electric shocks, pull the power cord plug out and unplug all cables connected to the printer before cleaning the outside of the printer.
KEEP THESE INSTRUCTIONS.

Dealing with the printer 10
Find information about the printer

Dealing with the printer 11
Guarantee Statement Guarantee information varies by country or region:
PLEASE NOTE: RISK OF INJURY: The printer weighs more than 18 kg and must be lifted by two or more trained staff.
When placing the printer, take into account space for opening drawers, valves and panels. If you plan to install optional parts, you should also keep sufficient space for this. The following is important:
Information requested Source

Dealing with the printer 12

PLEASE NOTE: RISK OF INJURY: Make sure to place paper separately in each tray to prevent equipment instability. Keep all other drawers closed until you need them.
NOTE: TILT RISK: For configurations on the ground, additional components are needed to promote stability. If you are using multiple input options, use a printer default or a printer base. You may also need additional parts for a multifunctional printer (MFP) that allows you to scan, copy and fax. See www.lexmark.com/multifunctionprinters for more information.

Dealing with the printer 13

2 Automatic document input (ADI)
7 Standard drawer for 550 sheets

Dealing with the printer 14


1 Optional tray for 250 sheets
2 Optional tray for 550 sheets
If the printer is installed on a network, you can use the Embedded Web Server for the following:
You can open the Embedded Web Server for your printer as follows:
– An IP address consists of four sets with numbers separated by points, for example
123.123.123.123.
3 Optional Non-Device

Dealing with the printer 15
– If you are using a proxy server, temporarily disable it so that the web page is correct
can be loaded.
2 Open a web browser and type the printer IP address in the address bar.
3 Press Enter.
The page of the Embedded Web Server is displayed.
Automatic Document Input (ADI) Glass Plate


Use the ADI for multi-page documents, including double-sided documents.
Use the glass plate for single page documents, book pages, small items (such as postcards or photographs), trans-parants, photo paper or thin objects (suchas cuttings from magazines).
Use the ADF:

Dealing with the printer 16
If you use the glass plate, proceed as follows:

Information about the control panel 17
Use the printer's control panel

2 Start screen (button) Go to the start screen.
3 Enable sleep (button) Sleep or slumber mode. The sleep mode is switched off with the following actions:
4 Enter Keypad Numbers, letters or symbols.
5 Check the printer status.
6 Start (button) Starting a task depending on the selected mode.
7 Cancel (button) This stops any activity of the printer.
8 Clear/Reset All (button)
Restore default settings from a function, such as printing, copying or e-mailing.
The colors of the sleep button and indicator lights indicate a certain printer status or state.
The printer is disabled or the printer's slumber mode is active.
Blinking green The printer is warming up, processing data or printing.
Brandt green The printer is on, but not active.
Function component · Indication lamp Printer status

Information about the control panel 18

Blinking red The printer requires intervention by the user.
The printer is disabled, not active or ready to go.
Brandt orange The printer is in sleep mode.
Flick orange The slumber mode of the printer is switched on or off.
Flashes orange according to a slow pattern where the button burns for 0.1 seconds and goes out 1.9 seconds.
If the printer is enabled, a base screen will be displayed on the display. This is called the start screen. Touch the buttons and icons in the start screen if you want to perform an action such as copy, fax, scan, open the menu screen or replying messages.

1 Change language Allows you to display the change language pop-up window, which allows you to modify the printer's main language.
5 FTP Open the FTP menus (File Transfer Protocol) and scan documents directly to an FTP server.

Information about the control panel 19
9 Bookmarks Allows you to create, classify and save a bookmarked collection (URL) in a structure view with folders and file links.
10 USB drive Allows you to view, select, print, scan or email photos and documents from a flash drive.
11 Waiting tasks This will display all current tasks in the waiting mode.
13 Tips Open context-dependent help information dialog box.
14 Search for tasks in the hold position
Search for one or more of the following items:
A path is displayed in each menu screen. The function displays the path to the current menu You can touch any underlined word to go back to the corresponding menu. Number of copies is not underlined, because this is the active screen. If you touch an underlined word on the screen Number of copies before setting and saving the number of copies, the selection will not be saved and it will not become the default.
For example: Menus > Settings > Copy settings > Number of copies
If an intervention message affects a function, this icon is displayed and the red light starts to flash.
Touch Result · Function Description · Menupad

Information about the control panel 20
IP address printer E.g.:
You will find the IP address of your network printer in the upper left corner of the home screen. The address consists of four numbers separated by points. You can use the IP address to access the Embedded Web Server, so you can view and configure remote printer settings. So you do not have to physically stand at the printer.
123.123.123.123

1 Show arrows A list of options.
2 Copy a copy of it.
3 Advanced Options Select a Copy option.
4 Homepage Go to the home screen.
5 Select a higher value.
6 Select lower value.
7 Tips Open the context-dependent Help information dialog box.
Function Description · Touch Result

Information about the control panel 21
Save an setting.
Restore values on the screen.

Set and use applications from the home screen 22
1 Type cmd in the Run dialog box to open the command prompt.
2 Type ipconfig And find the IP address.
1 Select Network via System Preferences in the Apple menu.
2 Select your connection type and then click Advanced > TCP/IP.
3 Look for the IP address.
This way you will find the IP address of your printer:
The Embedded Web Server is the printer's web page that allows you to view and configure remote printer settings when you are not near the printer.

Set and use applications from the home screen 23
2 Open a web browser and type the printer IP address in the address bar.
3 Press Enter.
1 Open a web browser and type the printer IP address in the address bar.
2 Perform one or more of the following actions: • Show or hide icons of the basic printer functions. a Click on Institutions > General Settings > Change Startscreen. b To select which icons are on the start screen, enable checkboxes
The Commission has also proposed a new approach to the problem of fraud.
Copying only Scan a pass and print both sides on one page. See Set Pass Copy on page 25 for more information.
Fax Scan a document and send it to a fax number. See 'Faxen' on page 108 for more information.
Find frequently used online forms and print them from the printer's start screen. See 'Configure Forms and Favorites' on page 24 for more information.
Scan a document and send it to multiple destinations at once. See Set up multiple items on page 26 for more information.
My shortcut Create shortcuts on the printer's home screen. See 'Use my shortcut' on page 26 for more information.
Scan for Mail Scan a document and send it to an e-mail address. See 'E-mail' on page 101 for more information.
Scan to Computer Scan a document and save it to a predefined folder on a host computer. See 'Configure Scan to PC' on page 134 for more information.
Option Result · Forms and favorites · Send Multiple Items

Set and use applications from the home screen 24
Scan for FTP Scan documents directly to an FTP server (File Transfer Protocol). See 'Scan for an FTP address' on page 131 for more information.
Scan to Network Scan a document and send it to a shared network folder. See 'Configure Scan through a Network' on page 27 for more information.
Your printer has already installed startup screens on delivery. Before you can use these applications, you need to activate and configure them using the Embedded Web Server. For more information about the use of the Embedded Web Server, please refer to 'Open The Embeded We B Server' on page 22.
For more information about configuring and using the applications in the home screen, do the following:
1 Go http://support.lexmark.com.
3 Click on the tab Manuals and select the application document in the start screen.

Streamline work processes by quickly finding and printing frequently used online forms from the printer's start screen.
1 Open a web browser and type the printer IP address in the address bar.
2 Click on Institutions > Applications > Application management > Forms and Favourites.
3 Click on Add and then adjust the settings.
Option Result · Select Function

Set and use applications from the home screen 25
4 Click on Apply.
If you want to use the application, hit Forms and Favourites on the printer's start screen and then navigate through form categories. You can also search forms based on form number, name or description.

Quickly and easily copy bank card size passes, such as your ID card and insurance pass.
You can print both sides of a card on one page, saving paper and displaying the information in a more convenient way.
1 Open a web browser and type the printer IP address in the address bar.
2 Click on Institutions > Applications > Application management > Copying only.
– When you scan a pass, make sure that the scanning resolution for color does not exceed 200 dpi
is and for black and white not more than 400 dpi.
Select Function

Set and use applications of the home screen 26
– When you scan multiple steps, make sure that the scanning resolution for color is no longer
is 150 dpi and for black and white not more than 300 dpi. • Page Borders. Select the checkbox to print the scanned image with an edge around it.
4 Click on Apply.
If you want to use the application, hit Copying only on the start screen and follow the directions.

Create shortcuts on the printer home page, setting up 25 commonly used copy, fax or email tasks.
To use this application click on My, and follow the instructions on the printer display.
Scan a document and send it to multiple destinations at once.

1 Open a web browser and type the printer IP address in the address bar.
2 Click on Institutions > Applications > Application management > Send Multiple Items.
3 Click on Add in the Profiles section and change the settings.
Select Function · Select Function

Set and use applications of the home screen 27
4 Click on Apply.
If you want to use the application, hit Send Multiple Items in the start screen on and follow the instructions on the printer display.

Scan a document and send it to a shared network folder. You can define up to 30 unique target folders.
1 Open a web browser and type the printer IP address in the address bar.
3 Define the destination folders and then adjust the settings.
4 Click on Apply.
If you want to use the application, hit Scan to Network in the start screen on and follow the instructions on the printer display.
Select Function

Set and use applications of the home screen 28
This application allows you to control the printer's operating panel even if you are not near the network printer. You can view printer status from your computer, release tasks on hold, bookmark and perform other printing related tasks.
1 Open a web browser and type the printer IP address in the address bar.
2 Click on Institutions > Settings External Control Panel.
3 Toggle the checkbox Enabled adjust and adapt the settings.
4 Click on Send.
Click on External Control Panel > Start VNC applet to use the application.
You can export configuration settings to a text file and import this file then apply the settings on other printers.
1 Open a web browser and type the printer IP address in the address bar.
2 To export or import a configuration for one application, perform the following actions: a Click on Institutions > Applications > Application management. b In the list of installed applications, click on the name of the application you want to configure.
c Click on Configure and carry out any of the following:
– When saving the configuration file you can enter a unique file name or
Use default name. – If the error "JVM Insufficient memory" occurs, repeat export operation until
the configuration file is saved. • To import a configuration from a file, click Import and browse to the saved configuration file exported from a previously configured printer.
– Before importing the configuration file, you have a choice to view it first or
Load directly. – If a time-out occurs and an empty screen appears, you will renew the
web browser and then click Apply.

Set and use applications from the home screen 29
3 To export or import a multi-application configuration, perform the following operations:
a Click on Institutions > Import/export. b Perform any of the following actions:

Setup additional printer 30
Install Internal Options
NOTE: DANGER OF ELECTRIC SHOCKS: If you want to access the controller card or install optional hardware or memory devices after setting up the printer, turn off the printer and pull the plug before continuing. If you have other devices connected to the printer, turn it off and unplug the cables from the printer.

Configure Extra Printer 31
NOTE: DANGER OF ELECTRIC SHOCKS: If you want to access the controller card or install optional hardware or memory devices after setting up the printer, turn off the printer and pull the plug before continuing. If you have connected other devices to the printer, disable them and unplug the cables from the printer.
1 Open the access valve of the controller card.

2 Open the controller card with the green lever.


3 Use the following illustration to find the right connection.

Setup additional printer 32

1 Connector for Memory Card
2 Optional Card Connector
3 Connector for printer hard drive
4 Connection for Lexmark Internal Solutions Port
4 Close the cover and then close the access valve.


NOTE: DANGER OF ELECTRIC SHOCKS: If you want to access the controller card or install optional hardware or memory devices after setting up the printer, turn off the printer and pull the plug before continuing. If you have connected other devices to the printer, disable them and unplug the cables from the printer.
1 Open the controller card access panel.
See 'Get access to the controller card' on page 31 for more information.
2 Remove the memory card from the package.

Setup additional printer 33
3 Make the recess (1) on memory card to line with the ridge (2) on connector.

4 Press the memory card into the connector and press the card towards the wall of controller card until it clicks in place.

5 Close the controller card cover and then close the control card access valve.

Configure Extra Printer 34
NOTE: DANGER OF ELECTRIC SHOCKS: If you want to access the controller card or install optional hardware or memory devices after setting up the printer, turn off the printer and pull the plug before continuing. If you have connected other devices to the printer, disable them and unplug the cables from the printer.
1 Open the controller card access panel.
See 'Get access to the controller card' on page 31 for more information.
2 Remove the optional card from the package.
3 Hold the card at the sides and place pins (1) on the bottom equally with the recesses (2) in the controller card.



Setup additional printer 35
4 Press the card firmly in place.

The controller card supports one optional Lexmark Internal Solutions Port (ISP).
NOTE: DANGER OF ELECTRIC SHOCKS: If you want to access the controller card or install optional hardware or memory devices after setting up the printer, turn off the printer and pull the plug before continuing. If you have other devices connected to the printer, turn it off and unplug the cables from the printer.

Setup additional printer 36
1 Open the access valve of the controller card.
2 Press the stopper slightly on the left side of the access valve and slide the valve aside to remove it.



3 Remove the ISP kit from the packaging.

Setup additional printer 37

2 Screw for attachment of the ISP to bracket
4 Screws for fixing the ISP metal bracket to printer housing
4 Place the plastic bracket in the external ISP enclosure until it clicks on.


5 Slide and press the ISP solution into plastic bracket.



Configure Extra Printer 38
6 Attach the ISP solution to the plastic bracket with the long screw.


7 Turn the two screws at the end of the ISP solution.



Configure Extra Printer 39
8 Place the white plug of the interface cable of the ISP solution in the white connection to the IPS.


9 Attach the external ISP housing at an angle by first placing the left hinges.


Setup additional printer 40
10 Lower the rest of the housing and then move the enclosure to the right.

11 Pull the ISP cable through the controller card cover.


Configure Extra Printer 41
12 Open the cap with the green lever.

13 Place the blue plug of the interface cable of the ISP solution in the blue connection to the IPS.


Setup additional printer 42
14 Close the cover.

15 Close the external ISP enclosure.
NOTE: DANGER OF ELECTRIC SHOCKS: If you want to access the controller card or install optional hardware or memory devices after setting up the printer, turn off the printer and pull the plug before continuing. If you have other devices connected to the printer, turn it off and unplug the cables from the printer.
1 Access to the controller card.
See 'Get access to the controller card' on page 31 for more information.
2 Remove the hard drive from the printer.
3 Install the printer's hard drive on the controller card.

Configure Extra Printer 43
a Unscrew the screws with a screwdriver with flat head.


b Place the plug of the hard disk interface cable in the connection to the controller card.


Configure Extra Printer 44
c Bring the screws of the printer's hard disk to line with the slots of the
controller card brackets and slide the hard drive into the bracket.

d Turn the two screws on.


4 Close the controller card cover and then close the control card access valve.

Setup additional printer 45
1 Access to the controller card.
See 'Get access to the controller card' on page 31 for more information.
2 Unscrew the screws that attach the printer's hard drive to the controller card bracket.

3 Remove the interface cable from the printer's hard drive from its connection to the controller card, but make sure you do not disconnect the cable from your hard disk. If you want to unplug the cable, first squeeze the paddle on the plug of the interface cable to release the lock before pulling out the cable.
4 Hold the printer's hard drive on its sides and remove it from the printer.
5 Close the controller card cover and then close the access valve.

Configure Extra Printer 46
PLEASE NOTE: RISK OF INJURY: The printer weighs more than 18 kg and must be lifted by two or more trained staff.
NOTE: DANGER OF ELECTRIC SHOCKS: If you want to access the controller card or install optional hardware or memory devices after setting up the printer, turn off the printer and pull the plug before continuing. If you have other devices connected to the printer, turn it off and unplug the cables from the printer.
NOTE: TILT RISK: For configurations on the ground, additional components are needed to promote stability. If you are using multiple input options, use a printer default or a printer base. You may also need additional parts for a multifunctional printer (MFP) that allows you to scan, copy and fax. See www.lexmark.com/multifunctionprinters for more information.
Install the printer and any hardware options you have purchased in the following order:
For more information on installing a printer standard, an optional tray for 250 or 550 sheets or padding plate see the installation manual provided with the option.
PLEASE NOTE: RISK OF INJURY: The printer weighs more than 18 kg and must be lifted by two or more trained staff.
NOTE: DANGER OF ELECTRIC SHOCKS: If you want to access the controller card or install optional hardware or memory devices after setting up the printer, turn off the printer and pull the plug before continuing. If you have other devices connected to the printer, turn it off and unplug the cables from the printer.
NOTE: TILT RISK: For configurations on the ground, additional components are needed to promote stability. If you are using multiple input options, use a printer default or a printer base. You may also need additional parts for a multifunctional printer (MFP) that allows you to scan, copy and fax. See www.lexmark.com/multifunctionprinters for more information.
1 Turn off the printer with the switch on/off and pull the plug out of the socket.

Setup additional printer 47


2 Unpack the drawer and remove all packaging material.
3 Pull the drawer out of base unit.

4 Take the packaging material out of the drawer.
5 Move the drawer into base unit.
6 Place the drawer near the printer.
7 Line the printer with the drawer and slowly lower the printer in place.

Configure Extra Printer 48

8 Connect the power cord to the printer, plug it into a grounded outlet and switch on the current.




Configure Extra Printer 49
NOTE: DANGER OF ELECTRIC SHOCKS: Do not turn this product on during thunderstorm or make electrical or wired connections, such as faxes, power cords or telephone cables, to prevent electric shocks.
PLEASE NOTE: RISK OF INJURY: To avoid the risk of electric shocks or fire, you need to connect the power cord directly to a grounded outlet close to the product and which is easily accessible.
PLEASE NOTE: RISK OF INJURY: Use only the power cord supplied with this product or a replacement component approved by the manufacturer to prevent fire or electric shocks.
PLEASE NOTE: RISK OF INJURY: Use to reduce the risk of fire only a telecommunication cord (RJ-11) of 26 AWG or more if you connect this product to the public fixed telephone network. For users in Australia, the cord should be approved by the Australian communication and media authority.

1 Connection for power cord
Connect the printer to a well grounded outlet.
2 On-off switch Turn on or off the printer.
3 Ethernet port Connect the printer to an Etherenet network.
Front Component

Configure Extra Printer 50
4 EXT port Extra devices (phone or answering machine) connect to the printer and telephone line. Use this port if you do not have a separate fax line for the printer and if this connection method is supported in your country or region.
5 LINE port Connect the printer to an active phone line via a standard wall connection (RJ-11), DSL filter, VoIP adapter or another adapter that allows you to send and receive faxes.
6 USB port Connect a keyboard or compatible option.
7 USB printer port Connect the printer to your computer.
8 Safety lock Attach a lock to hold the printer in place.
2 Run the installer and follow the instructions on the computer display.
3 For Macintosh users: add the printer.
1 Open the printer folder.
3 Navigate to the Configuration tab and then select Update now - Printer questions.
4 Apply the changes.
1 Navigate via System Preferences in the Apple menu to your printer and then select Options and supplies.
2 Navigate to the list of hardware options and then add any installed options.
3 Apply the changes.
Front Component

Configure additional printer 51
If you want to configure the printer for an Ethernet network, you need to collect the following data before starting:
You need an Ethernet cable to connect the printer to the network and a available network port that will physically connect the printr to the Network. Use a new network cable to prevent problems with damaged cables.
Make sure you have the following data at hand before configuring your printer for a wireless network:
Some ad hoc networks also require the Auto setting. If you are not sure about the channel to select, consult your system administrator.

Configure Extra Printer 52
If your network uses multiple WEP keys, you can specify up to four keys in the appropriate locations. Select the key currently used on the network by selecting the default WEP transmission key. – Pre-shared key/password for WPA/WPA2
WPA contains encryption as an additional security level. You can choose from AES or TKIP. Encryption must be set on the router and printer for the same type otherwise the printer cannot communicate on the network. – 802.1X3ADDITIVES
If you install the printer on an 802.1X network, you may need the following data:
If your wireless network does not use security, you will have no security information.
– If you do not know the SSID of the network to which the computer is connected, start the utility
for the wireless network adapter of the computer and search for its network name. Please refer to the documentation at the access point or contact your system administrator if you cannot find SSID or security information from your network. – Please refer to the documentation or Embedded Web Server of the access point or contact us
with the system administrator to find out the pre-shared key or password for WPA/WPA2 for the wireless network.
Check the following before you start:
> Network/Ports > Active NIC > Auto > Send
1 Browse the printer's control panel to:
> Network/Ports > Network [x] > Configure Network [x] > Wireless > Set Wireless Connection
2 Select a wireless connection setting method.

Configure Extra Printer 53
Find Networks Show available wireless connections.
Enter Network Name Manually enter the SSID.
Wi‑Fi Protected Setup Connecting printer to a wireless network via Wi-Fi Protected Setup (WPS).
3 Follow the instructions on the display.
Check the following before you start:
1 Browse the printer's control panel to:
> Network/Ports > Network [x] > Configure Network [x] > Wireless > Set Wireless Connection > Wi‑Fi Protected Setup > Start a push-button method
2 Follow the instructions on the display.
1 Browse the printer's control panel to:
> Network/Ports > Network [x] > Configure Network [x] > Wireless > Set Wireless Connection > Wi‑Fi Protected Setup > Start PIN method
2 Copy the eight-digit WPS PIN.
3 Open a web browser and type the IP address of the access point in the address bar.
4 Open the WPS settings. Please refer to the documentation at your access point for more information.
5 Enter the eight-digit PIN and save the setting.
Option Function

Setup additional printer 54
Check the following before you start:
1 Open a web browser and type the printer IP address in the address bar.
2 Click on Institutions > Network/Ports > Wireless.
3 Change the settings to match your access point (wireless router).
4 Click on Send.
5 Disable the printer and unplug Ethernet cable. Then wait at least five seconds before you turn the printer back on.
6 You can check if the printer is connected to a network by printing a page with network settings. Then check the Network Map [x] section to see if the status is connected.
1 Open the printer folder.
2 In the printer's quick menu with the new ISP, open Printer Properties.
3 Configure the port in the list.
4 Update the IP address.
5 Apply the changes.

Setup additional printer 55
1 Via System Preferences in the Apple menu, navigate to the list of printers and then select + > IP.
2 Type the printer's IP address in the address bar.
3 Apply the changes.
1 Set the parameters on the printer. a You can navigate to the port settings menu via the control panel. b Find the serial port settings menu and adjust the settings if necessary.
c Apply the changes.
2 Open the Printers folder on your computer and then select your printer.
3 Open the printer properties and select the COM port from the list.
4 Set the COM port parameters in Device Manager.
If all hardware and software options are installed and the printer is enabled, check that the printer has been set correctly by printing:
In the start screen, browse for:
> Reports > Page Menu Settings

Configure Extra Printer 56
If the printer is connected to a network, you can check your network connection by printing a network configuration page. This page also contains information that is important in the configuration of printing over a network.
1 In the start screen, browse for:
> Reports > Network Configuration Page
2 Check the first part of the page with network settings to see if Status indicates that the printer is connected.
If Status indicates that the printer not connected, it is possible that the LAN connection point is not active or that the network cable is not functioning properly. Ask the system administrator to resolve this problem and then print another page with network settings.

Paper and special printing material places 57
The choice and processing of paper and special printing material can influence the reliability of the printing. See 'Prevention of paper failures' on page 244 and 'Save Paper' on Page 76 for more information.
In the start screen, browse for:
> Paper Menu > Paper Size/Species > select a drawer > select paper size or type > Send
The universal paper format is a user-defined setting that allows you to print on paper formats that are not preset in the printer menus.
1 In the start screen, browse for:
> Paper Menu > Universal Settings > Units of measurement > select the unit of measurement >
2 Touch Width standing or Height standing On.
3 Select the width or height and hit
On.
PLEASE NOTE: RISK OF INJURY: Make sure to place paper separately in each tray to prevent equipment instability. Keep all other drawers closed until you need them.
1 Pull the drawer out completely.

Paper and special printing material places 58

2 Press the width guide and slide it to the right position for the size of paper you place in the drawer



Paper and special printing material placing 59
3 Press the length guide and slide it to the right position for the size of paper you place in the drawer.


EXEC
B5 A5 A6
LTR
A 4
B5
EX EC
A 5

Paper and special printing material 60


4 Bend the sheets a few times and fan them out. Do not fold or wrinkle the paper. Straighten the pile on a flat surface.

5 Place the paper stack with the print side down in the printer.


Paper and special printing material places 61
Without optional nonfinisher With optional non finisher






Paper and special printing material places 62
6 Place the drawer.

7 Specify the type and size of paper in the tray from the Paper menu on the printer control panel.
Use the universal charger when printing on different paper sizes and types or special printing materials, such as cardboard, transparencies, paper labels and envelopes. You can also use the universal charger for single-sided printing tasks on letterhead paper.
1 Open the universal charger.



Paper and special printing material
a Remove the extension of the universal charger.

b Gently pull the extension until the universal loader is fully pulled out and opened.


Paper and special printing material
2 Press the tab on the left width guide and move the conductors to the right position for the size paper you place in the drawer

3 Prepare the paper or special printing material to place it. • Bend the sheets a few times to untie them and then fan them out. Do not fold or wrinkle the paper. Straighten the pile on a flat surface.


Paper and special printing material
4 Place the paper or special material.




Paper and special printing material 66




Paper and special printing material

5 In the Paper menu on the printer control panel, specify the paper size and type corresponding to the paper or special printing material in the universal loader.
The standard drawer can contain up to 150 sheets of 75g/m2 paper. Prints are delivered with the print side down. The standard drawer contains a paper stopper that prevents paper from slipping out of the front of the drawer when stacked.
If you want to open the paperstop, pull on the papertop so that it folds forward.


Paper and special printing material places 68
The printer connects loading when the specified paper size and the given type of paper are the same. If one of the connected drawers becomes empty, then the next linked drawer will be automatically used. If you do not want loading to be linked, give the type of paper a unique name.
1 Open a web browser and type the printer IP address in the address bar.
2 Click on Institutions > Paper Menu.
4 Click on Send.
1 Open a web browser and type the printer IP address in the address bar.
2 Click on Institutions > Paper Menu > Custom Names.
3 Select a custom name and then type a custom paper type name.

Paper and special printing material places 69
4 Click on Send.
5 Click on Custom species and check that the modified name has been replaced by the new custom paper type name.
1 In the start screen, browse for:
> Paper Menu > Custom Names
2 Select a custom name and then type a custom paper type name.
On.
4 Touch Custom Name to check that the new type of paper name has replaced the custom name.
Assign a custom type of paper name to a drawer when linking or unplugging loading.
1 Open a web browser and type the printer IP address in the address bar.
2 Click on Institutions > Paper Menu > Custom species.
3 Select a custom paper type name and then select a paper type
4 Click on Send.
1 In the start screen, browse for:
> Paper Menu > Custom species
2 Select a custom paper type name and then select a paper type
On.
3 Hit · 3 Touch

Place paper and special printing material 70
1 Open a web browser and type the printer IP address in the address bar.
2 Click on Institutions > Paper Menu > Custom species.
3 Select a custom name you want to configure, select a paper type or special material type and click Send.
1 In the start screen, browse for:
> Paper Menu > Custom species
2 Select the custom name you want to configure and hit
On.

Manual for paper and special printing material 71
Use special printing material
– 'Fill Loads' on page 57 – Filling the Universal Charger on page 62
First, make some proofs before purchasing large quantities of envelopes.
– easy curling; – sticking together or damaged;

Manual for paper and special printing material 72
– contain windows, holes, perforations, cut-outs or relief; – containing metal clips, bows or folding clamps; – are folded together; – containing stamps; – have a (partially) uncovered adhesive strip when the valve side is closed or pasted; – have curved angles; – have a rough, folded or laminated finish. • Adjust the width guides so that they match the width of the envelopes.
Before purchasing large quantities of labels, make some proofs.
Please refer to the Card Stock & Label Guide on http://support.lexmark.com for more information on printing, labelling characteristics and design.
When printing labels, note the following:
– Labels can be at 230°C temperatures and stick not, curling or wrinkling
do not and do not release dangerous substances at these temperatures. – Label adhesive, front (printable material) and coating withstand 25-psi (172-kPa) pressure

Manual for paper and special printing material 73
Cardboard is a heavy, single layer special printing material. Many variable characteristics, such as moisture content, thickness and structure, can significantly influence the print quality. Before purchasing large quantities of cardboard, make some test prints.
If you select the right paper or special printing material, the number of printing problems will decrease. For optimal print quality, it is best to first make a sample on the paper or special printing material you want to use before purchasing large quantities of this.
The following paper properties affect the printing quality and reliability of the printer. Please take these characteristics into account when considering a new type of paper.
The standard printer drawers can automatically enter paper weighing up to 90 g/m2 with the length-long fiber. Optional printer drawers can automatically enter paper weighing up to 120 g/m2 with the length-long fiber. The universal charger can automatically enter paper weighing up to 163 g/m2 with the length-long fiber. Paper lighter than 60 g/m2
is not possible to be correctly imported, allowing paper failures. The best result is with 75 g/m2 paper and the length-long fiber. For paper smaller than 182 x 257 mm (7.2 x 10.1 inches) it is best to use 90 g/m2 or more.
Curlying is the tendency of paper to bend at the edges. This can cause input problems. Paper can curl up after it has been passed through the printer and is exposed to high temperatures. If you keep paper outside the packaging or in its drawers under hot, damp, cold or dry conditions, it may curl over before printing. This can cause input problems.

Manual for paper and special printing material 74
The smoothness of paper directly affects the printing quality. If paper is too rough, toner is not fixed properly. Too smooth paper can cause input problems or print quality issues. Use paper with a smoothness between 100 and 300 Sheffield points. A smoothness between 150 and 250 Sheffield points gives the best print quality.
The amount of moisture in paper affects the printing quality and also determines whether it can be passed through the printer. Leave the paper in the original package until you start using it. The paper is not then exposed to the negative influence of changes in humidity.
Allow the paper to acclimatise for 24 to 48 hours before printing in its original packaging and in the same environment as the printer. Extend this period by a few days if the storage or transport environment is very different from the printer environment. Thick paper may need a longer acclimatisation period.
The direction of fibre refers to the alignment of paper fibres in a sheet of paper. Fibres are either longitudinally oriented or in the direction of latitude.
For a weight of 60-90 g/m2, it is best to use paper with the length-long fiber.
High quality xerographic paper is usually made up of 100% chemically treated wood pulp. This wood pulp content provides a high degree of stability to the paper, reducing import problems and improving print quality. If paper contains other fibres, for example cotton, this can lead to problems in processing.
The use of the following paper types in the printer is not recommended:

Manual for paper and special printing material 75
Using the right paper prevents malfunctions and ensures that you can print without any problems.
You can prevent paper failures and poor printing quality as follows:
Please follow the following guidelines when choosing preprinted forms and letterhead paper:
Use paper printed with heat resistant ink that is suitable for copiers. The ink must be resistant to temperatures of 230 C without melting or releasing harmful substances. Do not use ink that is affected by the resin in the toner. Water or oil-based ink should meet these requirements. However, Latex ink could cause problems. If in doubt, please contact your paper supplier.
Preprinted paper, such as letterhead paper, must be resistant to temperatures up to 225 °C without melting or releasing dangerous substances.
Lexmark is an environmentally conscious company and encourages the use of business recycled paper that has been specially produced for use in (electrophotographic) laser printers. In 1998, Lexmark presented a study to the US government which showed that recycled paper produced by large paper mills in America can be imported as well by printer as ordinary paper. However, no absolute guarantee can be given that all types of recycled paper are correctly imported.
Lexmark constantly tests its printers with recycled paper (made from 20 to 100% re-used material) and various types of test paper from all over the world. For this purpose, Lexmark uses climate chambers (test rooms) to test at different temperatures and humidity levels. Lexmark has found no reason to advise against the use of modern business recycled paper, but normally the following directives apply to recycled paper.

Manual for paper and special printing material 76
Wristprint paper, light paper (
Keep the following paper storage guidelines to ensure regular printing quality and prevent any paper failures.

A6 105 x 148 mm (4,13 x 5,83 inch)
1 Paper is only supported if the paper size setting is set to Universal.
2 Paper is only supported in dual-sided (duplex) printing mode if the paper has a width of 210 mm (8.27 inches) and a length of 279.4 mm (11 inches). The smallest supported format for Universal can only be placed in the universal charger.

Manual for paper and special printing material 77

Folio 215,9 x 330,2 mm (8,5 x 13 inch)
76.2 x 127 mm (3 x 5 inches) to 215.9 x 359.92 mm (8.5 x 14.17 inches).
C5 Envelope 162 x 229 mm (6,38 x 9,01 inch)
1 Paper is only supported if the paper size setting is set to Universal.
2 Paper is only supported in dual-sided (duplex) printing mode if the paper has a width of 210 mm (8.27 inches) and a length of 279.4 mm (11 inches). The smallest supported format for Universal can only be placed in the universal charger.

Manual for paper and special printing material 78

Other Envelope 85.7 x 165 mm to 215.9 x 355,6 mm to 8.5 x 14 inches)
1 Paper is only supported if the paper size setting is set to Universal.
2 Paper is only supported in dual-sided (duplex) printing mode if the paper has a width of 210 mm (8.27 inches) and a length of 279.4 mm (11 inches). The smallest supported format for Universal can only be placed in the universal charger.

Paper Type Standard drawer for 550 sheet Tray for 250 or 550 sheets
1 Transparants are only supported in the 250 sheet tray.
2 Use envelopes that are flat when placed separately with the print side down on a table.

Manual for paper and special printing material 79

A4 210 x 297 mm (8,3 x 11,7 inch) X
A5 148 x 210 mm (5,8 x 8.3 inches) X
A6 105 x 148 mm (4.7 x 5.8 inches) X
JIS B5 182 x 257 mm (7,2 x 10,1 inch) X
Letter 216 x 279 mm (8,5 x 11 inches)
Legal 216 x 356 mm (8,5 x 14 inches)
Executive 184 x 267 mm (7,3 x 10,5 inch) X
Oficio (Mexico) 216 x 340 mm (8,5 x 13,4 inch)
Folio 216 x 330 mm (8,5 x 13 inches)
Statement 140 x 216 mm (5,5 x 8.5 inches) X
Universal 105 x 216 mm to 216 x 356 mm (4.13 x 8.5 inches to 8.5 x 14 inches) X
Envelope 7 3/4 (Monarch) 98 x 191 mm (3.9 x 7.5 inches) X
9-envelope 98 x 225 mm (3.9 x 8.9 inches) X
10-Envelope 105 x 241 mm (4.1 x 9.5 inches) X
Envelope DL 110 x 220 mm (4.3 x 8.7 inches) X
C5 Envelope 162 x 229 mm (6,38 x 9,01 inch) X
B5 Envelope 176 x 250 mm (6,93 x 9,84 inch) X
Other Envelope 98 x 162 mm (3.9 x 6.4 inches) to 176 x 250 mm (6.9 x 9.8 inches). X


Manual for paper and special printing material 80

Print a document
You can use the Forms and Favorites application (Formula and Favourites) to quickly and easily access frequently used forms or other information that is printed regularly. Before you can use the application, you must first configure it on the printer. See 'Configure Forms and Favorites' on page 24 for more information.
1 In the start screen, browse for:
Forms and Favourites > select a form in the list > specify the number of copies > specify other settings
2 Apply the changes.
1 Open the Print dialog from the document you want to print.
2 Adjust the settings if necessary.
3 Send the print job.
1 Open a web browser and type the printer IP address in the address bar.
2 Click on Institutions > Print Settings > Quality Menu > Toner intensity.
3 Adjust toner intensity and click Submit.
1 In the start screen, browse for:
> Institutions > Print Settings > Quality Menu > Toner intensity
2 Adjust the settings and touch Submit On.
Print 81

Mopria® Print Service is a mobile printing solution, designed for mobile devices with Android 4.4 or later. You can directly print on any printer that is compatible with Mopra.
1 Launch a compatible application from the home screen of your mobile device.
2 Tap Print and select the printer.
3 Send the print job.
Google Cloud PrintTM is a mobile printing solution that allows you to print on printers compatible with Googo Cloud printer using enabled applications on mobile devices.
1 Launch a enabled application from the home screen of your mobile device.
2 Tap Print and select the printer.
3 Send the print job.
AirPrint is a mobile printing solution that allows you to print directly from Apple devices on printers compatible with AirPrint.
1 Launch a compatible application from the home screen of your mobile device.
2 Select an item to print and then tap the Share icon.
3 Tap Print and select a printer.
4 Print the document.
Print 82

Lexmark Mobile Print allows you to send documents and images directly to a supported Lex Mark printer.
1 Open the document and send or share it to Lexmark Mobile Print.
2 Select a printer.
3 Print the document.
1 Place a flash drive in the USB port.

Print 83


2 On the printer's control panel, touch the document you want to print.
3 Touch the arrows for an example of the document.
to specify the number of copies you want to make and hit Print On.
Print 84 · 4 Use · or

Documents:
1 Browse the printer's control panel to:
> Security > Secure Printing > and select the type of job to print
Max. invalid PIN Limit the number of times that an invalid Pin code can be entered.
False time secure task Allows you to hold print jobs on the computer until you enter the PIN on the control panel.
Rejecting and saving the printed jobs in printer memory.
Checking decay task Allows you to print one copy of a job while the printer holds on to remaining copies. This allows you to check that the quality of the first copy is as desired. Once all copies are printed, the print job is automatically removed from printer memory.
Falsely reserved task Allows you to save print jobs so that you can print them at a later time.
Print 85 · Recommended Flash Drives File Type · Option To

2 Touch Submit On.
1 Open the Print dialog from the document you want to print.
3 Select the type of job to print.
4 Assign a username, if necessary.
5 Send the print job.
6 Hit on the printer's home screen Tasks pending On.
7 Send the print job.
1 Open a web browser and type the printer IP address in the address bar.
2 Click on Institutions > Security > Settings Secure Print.
4 Click on Submit to save the modified settings.
Print 86 · Option To

1 In the start screen, browse for:
> Reports > Print fonts
2 Touch PCL fonts or PostScript Fonts On.
A directory list is an overview of all sources stored in flash memory or on the printer's hard drive.
In the start screen, browse for:
> Reports > Print Directory
1 Touch Cancel Task on the printer control panel or press
on the keypad.
2 Touch the job you want to cancel and then touch Delete selected tasks On.
press the keypad, you must Resume press to return to the start screen.
2 Select the job you want to cancel.
Print 87

Automatic Document Input (ADI) Glass Plate
Use the ADI for multi-page documents.
Use the glass plate for loose pages, small objects (such as postcards or photographs), transparencies, photo paper or thin material (suchas cuttings from magazines).
1 Place an original document with the printed side facing up and the short side first in the ADF tray or with the imprinted side facing down on the glass plate.
2 If you insert a document into the ADF drawer, you need to adjust the paper guides.
3 Press the control panel.
1 Place an original document with the printed side facing up and the short side first in the ADF drawer.
Copy 88

2 Adjust the paper guides.
3 In the start screen, browse for:
Copy > Specify the copying settings > Copy
1 Place the original document with the printed side down in the top left corner of the glass plate.
2 In the start screen, browse for:
Copy > Specify the copying settings > Copy
Place the following document on the glass plate and touch Scan Next Page if you want to scan any more pages.
3 Touch Complete Task On.
1 Place a photo with the print side down in the top left corner of the glass plate.
2 In the start screen, browse for:
Copy > Contents > Photo >
3 In the Content Source menu, select the setting that best describes the source of content in the original photo.
5 Touch Complete Task On.
1 Place an original document with the printed side facing up and the short side first in the ADF tray or with the imprinted side facing down on the glass plate.
2 In the start screen, browse for:
Copy > Copying > select the format of original document >
Copy 89 · 4 Hit · > Copy to

3 Go to:
Copy To > select the drawer with the transparencies > Copy
If there are no drawers with transparents, go to:
> select the format of the transparencies >
4 Place transparencies in the universal charger and hit Copy On.
1 Place an original document with the printed side facing up and the short side first in the ADF tray or with the imprinted side facing down on the glass plate.
2 If you insert a document into the ADF drawer, you need to adjust the paper guides.
3 In the start screen, browse for:
Copy > Copying > select the format of original document >
4 Go to:
Copy To > select the drawer with the letterhead > Copy
5 If there are no drawers supporting letterheads, navigate to:
Manual input > Select the size of the letterhead > Letterhead
6 Enter letterhead paper with the top of it first into the universal charger and then touch Copy On.
1 Place an original document with the printed side facing up and the short side first in the ADF tray or with the imprinted side facing down on the glass plate.
2 If you insert a document into the ADF drawer, you need to adjust the paper guides.
Copy 90 · Manual input > · > Transparents >

3 In the start screen, browse for:
Copy > Copying > select the format of original document >
4 Go to:
Copy To > select a new format for the copy >
1 Place an original document with the printed side facing up and the short side first in the ADF tray or with the imprinted side facing down on the glass plate.
2 If you insert a document into the ADF drawer, you need to adjust the paper guides.
3 In the start screen, browse for:
Copy > Copying > select the format of original document >
4 Go to:
Copy To > Select the tray with the type of paper you want to use >
5 Touch Copy On.
Use the ADI to copy original documents with different paper sizes. Depending on the paper formats placed in the drawers and settings "Copy to" and "Copie to," each copy is printed on different paper sizes (example 1) or made suitable for one size of paper (example 2).
1 Place an original document with the printed side facing up and the short side first in the ADF tray or with the imprinted side facing down on the glass plate.
2 If you insert a document into the ADF drawer, you need to adjust the paper guides.
Copy 91 · > Copy

3 In the start screen, browse for:
Copy > Copying > Combined formats >
4 Go to:
Copy To > Auto Format Adjustment >
The scanner recognizes the different paper sizes while they are scanned. Copies are printed on different paper sizes, identical to the paper formats of the original document.
1 Place an original document with the printed side facing up and the short side first in the ADF tray or with the imprinted side facing down on the glass plate.
2 If you insert a document into the ADF drawer, you need to adjust the paper guides.
3 In the start screen, browse for:
Copy > Copying > Combined formats >
4 Go to:
Copy > Letter >
The scanner recognizes the different paper formats while they are scanned and makes pages of mixed sizes that fit into the selected paper format.
1 Place an original document with the printed side facing up and the short side first in the ADF tray or with the imprinted side facing down on the glass plate.
2 If you insert a document into the ADF drawer, you need to adjust the paper guides.
3 In the start screen, browse for:
Copy > Silk (Duplex) > select the desired duplex method
> Copy On.

Copies can be scaled up to 25% or 400% of the original format.
1 Place an original document with the printed side facing up and the short side first in the ADF tray or with the imprinted side facing down on the glass plate.
2 If you insert a document into the ADF drawer, you need to adjust the paper guides.
3 Hit in the home screen Copy On.
4 Hit in Scales
to reduce or increase the value by 1 %.
If you touch "Copy to" or "Copie of" after manually setting Scales, the value will be reset to Autom.
5 Touch Copy On.
1 Place an original document with the printed side facing up and the short side first in the ADF tray or with the imprinted side facing down on the glass plate.
2 If you insert a document into the ADF drawer, you need to adjust the paper guides.
3 In the start screen, browse for:
On.

> Copy On.
If you print multiple copies of a document, you can choose to print them as a set (sorted) or print the copies as groups from the same pages (not sorted).
1 Place an original document with the printed side facing up and the short side first in the ADF tray or with the imprinted side facing down on the glass plate.
2 If you insert a document into the ADF drawer, you need to adjust the paper guides.
3 In the start screen, browse for:
Copy > Enter the number of copies > Sort > select the order of pages >
1 Place an original document with the printed side facing up and the short side first in the ADF tray or with the imprinted side facing down on the glass plate.
2 If you insert a document into the ADF drawer, you need to adjust the paper guides.

3 In the start screen, browse for:
Copy > Advanced Options > Separation sheets
> Copy On.
To save paper, you can copy two or four consecutive pages of a multi-page document on one sheet of paper.
1 Place an original document with the printed side facing up and the short side first in the ADF tray or with the imprinted side facing down on the glass plate.
2 If you insert a document into the ADF drawer, you need to adjust the paper guides.
3 In the start screen, browse for:
Copy > Advanced Options > Paper saving > select the output you want >
You use a custom copy job or task to compose one copy job from one or more sets of originals. Each set can be scanned according to different task parameters. If a copy job is sent while Custom task is enabled, the first original set will be scanned according to specified settings. The next set is scanned according to the same or other settings.
The definition of a set depends on the scan source:
Copy 95 · 5 Hit · > Copy

Example:
1 Place an original document with the printed side facing up and the short side first in the ADF tray or with the imprinted side facing down on the glass plate.
2 If you insert a document into the ADF drawer, you need to adjust the paper guides.
3 In the start screen, browse for:
Copy > Advanced Options > Custom Task > To >
4 Insert the following document with the printed side facing upwards and the short side facing forward into the ADF tray or with the imprinted side facing downwards onto the glass plate. Hit Next Scan from the automatic document input or Scanning via flatbed On.
5 Repeat the previous step if you want to scan another document. Hit different Complete Task On.
1 Place an original document with the printed side facing up and the short side first in the ADF tray or with the imprinted side facing down on the glass plate.
2 If you place a document in the automatic document input, you need to adjust the paper guides.
3 In the start screen, browse for:
Copy > Advanced Options > Header/Footer > Select where to put the header or footer > select the type of header/footer you want to use.
4 Enter the required data depending on the header or footer you selected and hit Done On.
press and then push.
Copy 96 · > Copy · 5 Touch

At the top of each page, an overlay message can be placed. You have the choice of Urgent, Confidential, Copy, Custom and Concept.
1 Place an original document with the printed side facing up and the short side first in the ADF tray or with the imprinted side facing down on the glass plate.
2 If you insert a document into the ADF drawer, you need to adjust the paper guides.
3 In the start screen, browse for:
Copy > Advanced Options > Overlay > select the overlay message > Done > Copy
When the ADF starts processing a document, you hit Cancel Task on the printer control panel.
Touch Cancel Task On the start screen.
On the display is Cancel The Commission has also proposed a new approach to the problem of fraud. When the task is cancelled, the copy screen will be displayed.
1 Touch Cancel Task on the printer control panel or press
on the keypad.
2 Touch the task you want to cancel and touch Delete selected tasks On.
press the keypad, you can return to the start screen by Resume touch.
Copy 97

This option opens a screen where you can select the paper size of the original document.
This option opens a screen in which you can enter the paper size and type of paper on which the copies are printed.
With this option you can scale the document from 25% to 400% of its original document size. You can also set up automatic scales.
on the printer's control panel to reduce or increase the value by one percent. If you want to increase or decrease the value continuously, hold down the button for two or more seconds.
This option allows you to indicate how much lighter or darker the copies should be compared with the original document.
This option allows you to make single or double-sided copies of single or dual-sided original documents.
Copy 98 · or

Automatic Document Input (ADI) Glass Plate
Use the ADI for multi-page documents.
Use the glass plate for loose pages, small objects (such as postcards or photographs), transparencies, photo paper or thin material (suchas cuttings from magazines).
You can use the printer in different ways to send scanned documents via email to one or more recipients. You can type the email address or use a shortcut number or the address book.
1 Open a web browser and type the printer IP address in the address bar.
2 Click on Institutions > Settings e-mail/ FTP > Email Settings.
3 Enter the correct data and click Send.
1 Open a web browser and type the printer IP address in the address bar.
Email 101

2 Click on Institutions > Settings e-mail/ FTP > Email Settings.
3 Enter the correct data and click Send.
1 Open a web browser and type the printer IP address in the address bar.
2 Click on Institutions.
3 Click on Other settings Manage shortcuts > Settings for mail shortcut.
4 Enter a unique name for the recipient of the email and then enter the e-mail address. If you enter multiple addresses, separate the individual addresses with a comma.
5 Click on Add.
1 In the start screen, browse for:
Email > Recipient > type an email address
If you want to create a group of recipients, hit the option for next address and specify the email address of the next recipient.
2 Touch Subject to, type the subject of the email and touch Done On.
3 Touch Message on, type your message and touch Done On.
4 Adjust the email settings.
On.
6 Type a unique name for the shortcut and hit it afterwards Done On.
7 Check if the name of the shortcut is correct and then hit OK On.
If the name is not correct, you will be hit Cancel enter the data again.
Email 102 · 5 Touch

You can use the printer to email scanned documents to one or more recipients in different ways. You can type the email address or use a shortcut number or the address book. You can also use the Multi Send or MyShortcut application from the printer's start screen. See "Activate Applications in the Start screen" on page 24 for more information.
1 Place an original document with the printed side facing up and the short side first in the ADF tray or with the imprinted side facing down on the glass plate.
2 If you insert a document into the ADF drawer, you need to adjust the paper guides.
3 In the start screen, browse for:
4 Enter the email address or press the keypad # and enter the quick-link number.
5 Touch Done > Send On.
1 Place an original document with the printed side facing up and the short side first in the ADF tray or with the imprinted side facing down on the glass plate.
2 If you insert a document into the ADF drawer, you need to adjust the paper guides.
Email 103 · Email > Recipients

3 Press #, enter the shortcut number with the keypad and hit
On.
4 Touch Send On.
1 Place an original document with the printed side facing up and the short side first in the ADF tray or with the imprinted side facing down on the glass plate.
2 If you insert a document into the ADF drawer, you need to adjust the paper guides.
3 In the start screen, browse for:
Email > Recipients >
> Specify the recipient name Search
4 Touch the recipient's name.
5 Touch Done On.
1 Place an original document with the printed side facing up and the short side first in the ADF tray or with the imprinted side facing down on the glass plate.
2 If you insert a document into the ADF drawer, you need to adjust the paper guides.
3 In the start screen, browse for:
Email > Recipients > type the e-mail address > Done
4 Touch Subject to, type the subject of the email and touch Done On.
5 Touch Message on, type your message and touch Done On.
Email 104

1 Place an original document in the ADF drawer or on the glass plate.
2 In the start screen, browse for:
Email > Recipients > type the email address > Done > Send As
3 Select the file type you want to send.
> Send.
This option allows you to specify the recipient of your email message. You can enter multiple email addresses.
This option allows you to add a subject line to your email.
This option will enter a message sent with the scanned attachment.
This option allows you to change the filename of the email attachment.
This sets the paper format for the documents you will send by email. If you set Original format to Combination formats, you can scan an original document containing different paper sizes (pages of the Letter and Legal format).
E-mail 105 · 4 Press

This option allows you to change the following settings:
This option allows you to view the first page of the image before it is included in the email attachment. When the first page is scanned, a short pause follows and then the preview is displayed.
Choose from the following settings:
Email 107

Automatic Document Input (ADI) Glass Plate
Use the ADI for documents with multiple pages, but also double-sided printed pages.
Use the glass plate for separate pages or book pages, small items (such as postcards or photographs), transparents, photo paper or thin objects (suchas cuttings from magazines).
In many countries and regions, it is mandatory that outgoing faxes contain the following information at or above each page sent, or on the first page of the shipment: fax name (identification of sender: a company or other entity, or a person) and fax number (phone number of the sending fax machine, business or other entities, or any person). See 'Regulation notices on terminal equipment for telecommunications' at page 332 for more information.
Enter this fax configuration data using the printer's control panel or use a web browser to go to the Embedded Web Server and open the Settings menu.
When you first enable the printer, some configuration screens will be displayed. If the printer has a fax function, the screens will display Fax name and Fax number.
1 If the Fax name screen is displayed, do the following: a Enter the name printed on all outgoing faxes. b Enter the fax name and touch Send On.
2 If the screen Fax number appears, enter the fax number and hit you Send On.
1 Open a web browser and type the printer IP address in the address bar.
Fax 108

2 Click on Institutions > Fax Settings > Analog Fax Settings.
3 In the Fax name field, specify the name to be printed on all outgoing faxes.
4 In the Fax number field, enter the printer's fax number.
5 Click on Send.
NOTE: DANGER OF ELECTRIC SHOCKS: Do not turn this product on during thunderstorm or make electrical or wired connections, such as faxes, power cords or telephone cables, to prevent electric shocks.
NOTE: DANGER OF ELECTRIC SHOCKS: Do not use the fax function during thunderstorms to prevent electric shock.
PLEASE NOTE: RISK OF INJURY: Use to reduce the risk of fire only a telecommunication cord (RJ-11) of 26 AWG or more if you connect this product to the public fixed telephone network. For users in Australia, the cord should be approved by the Australian communication and media authority.
Fax: 109



1 Connect one end of the phone cable to the printer's line port.
2 Connect the other end of the cable to a working analogue wall socket.
Fax 110

Connected to the same wall connection for telephones

1 Connect one end of the phone cable to the printer's line port.
2 Connect the other end of the cable to a working analogue wall socket.
3 Connect the answering machine to the printer's phone port.
Fax 111

Connected to various wall connections

1 Connect one end of the phone cable to the printer's line port.
2 Connect the other end of the cable to a working analogue wall socket.
Fax 112


1 Connect one end of the phone cable to the printer's line port.
2 Connect the other end of the cable to a working analogue wall socket.
3 Connect the phone to the printer's telephone port.
NOTE: DANGER OF ELECTRIC SHOCKS: Do not turn this product on during thunderstorm or make electrical or wired connections, such as faxes, power cords or telephone cables, to prevent electric shocks.
Fax 113

NOTE: DANGER OF ELECTRIC SHOCKS: Do not use the fax function during thunderstorms to prevent electric shock.
PLEASE NOTE: RISK OF INJURY: Use to reduce the risk of fire only a telecommunication cord (RJ-11) of 26 AWG or more if you connect this product to the public fixed telephone network. For users in Australia, the cord should be approved by the Australian communication and media authority.


A Digital Subscriber Line (DSL) splits a regular telephone line into two channels: voice calls and the Internet. Telephone and fax signals are both transmitted via the voice channel, while Internet signals are sent through the other channel.
To minimise interference between the two channels, you can request a DSL filter from your DSL provider.
1 Connect the LINE port of the DSL filter to the wall socket.
2 Connect one end of the phone cable to the printer's line port.
3 Connect the other end of the cable to the telephone port on the DSL filter.
Fax 114

NOTE: DANGER OF ELECTRIC SHOCKS: Do not turn this product on during thunderstorm or make electrical or wired connections, such as faxes, power cords or telephone cables, to prevent electric shocks.
NOTE: DANGER OF ELECTRIC SHOCKS: Do not use the fax function during thunderstorms to prevent electric shock.
PLEASE NOTE: RISK OF INJURY: Use to reduce the risk of fire only a telecommunication cord (RJ-11) of 26 AWG or more if you connect this product to the public fixed telephone network. For users in Australia, the cord should be approved by the Australian communication and media authority.


1 Connect one end of the phone cable to the printer's line port.
2 Connect the other end of the cable to the gate with the label Phone Line 1 (Phone line 1) or Phone Port (phone port) on the VoIP adapter.
3 Connect the phone to the printer's telephone port.
Fax 115

NOTE: DANGER OF ELECTRIC SHOCKS: Do not turn this product on during thunderstorm or make electrical or wired connections, such as faxes, power cords or telephone cables, to prevent electric shocks.
NOTE: DANGER OF ELECTRIC SHOCKS: Do not use the fax function during thunderstorms to prevent electric shock.
PLEASE NOTE: RISK OF INJURY: Use to reduce the risk of fire only a telecommunication cord (RJ-11) of 26 AWG or more if you connect this product to the public fixed telephone network. For users in Australia, the cord should be approved by the Australian communication and media authority.

Fax 116

1 Connect one end of the phone cable to the printer's line port.
2 Connect the other end of the cable to the gate with the label Phone Line 1 (Phone line 1) or Phone Port (phone gate) on the cable modem.
3 Connect your analogue phone to the printer's telephone port.
Configuration 2: The printer is connected to a wall connection; cable modem is located somewhere else in the building


1 Connect one end of the phone cable to the printer's line port.
2 Connect the other end of the cable to a working analogue wall connection for telephones.
3 Connect your analogue phone to the printer's telephone port.
Faxes 117

Setting up the fax in countries or regions with different telephone wall sockets and plugs
NOTE: DANGER OF ELECTRIC SHOCKS: Do not turn this product on during thunderstorm or make electrical or wired connections, such as faxes, power cords or telephone cables, to prevent electric shocks.
NOTE: DANGER OF ELECTRIC SHOCKS: Do not use the fax function during thunderstorms to prevent electric shock.
PLEASE NOTE: RISK OF INJURY: Use to reduce the risk of fire only a telecommunication cord (RJ-11) of 26 AWG or more if you connect this product to the public fixed telephone network. For users in Australia, the cord should be approved by the Australian communication and media authority.
The standard wall connection in most countries is RJ11. When the wall socket or equipment in your building is not compatible with this type of connection, you use a telephone adapter. If no adapter is supplied to the printer in your country or region, you can purchase it separately.
An adapter plug may be installed in the printer's telephone port. Do not remove the adapter plug from the printer's phone port if you connect to a serial or cascade-switched telephone system.
Faxes 118 · Article name Article number · Lexmark adapter plug 40X8519


1 Connect one end of the phone cable to the printer's line port.
2 Connect the other end of the cable to the RJ11 adapter and then connect the adapter to the wall connection.
3 If you want to connect another device with a non-RJ11 connection to this wall socket, you need to connect it directly to the phone adapter.
Fax 119

The German wall connection has two types of gates. The N-ports are for fax machines, modems and answering devices. The F-port is for phones. Connect the printer to one of the N ports.

1 Connect one end of the phone cable to the printer's line port.
2 Connect the other end of the cable to the RJ11 adapter and then connect the adapter to an N-port.
3 If you want to connect a phone and an answering machine to the same wall connection, you need to plug in your devices as indicated.
A specific call signal allows you to use multiple phone numbers on one telephone line. Each phone number has been assigned a different call signal.
1 Hit in the home screen Institutions > Fax > Analog Fax Settings > Fax reception settings > Admin controls > Reply After On.
2 Select the bell signal.
3 Apply the changes.
Fax 120

1 Open a web browser and type the printer IP address in the address bar.
2 Click on Institutions > Fax Settings > Analog Fax Settings.
3 In the Fax name field, specify the name to be printed on all outgoing faxes.
4 In the Fax number field, enter the printer's fax number.
5 Click on Send.
You can set the date and time so that every fax you send will print out the date, time and date.
1 Open a web browser and type the printer IP address in the address bar.
2 Click on Security > Set date and time.
3 Specify the current date and time in the Set Date and Time field manually.
4 Click on Send.
The printer can be set so that it automatically adjusts the time to summertime:
1 Open a web browser and type the printer IP address in the address bar.
2 Click on Security > Set date and time.
3 Toggle the checkbox Automatically use summer time enter and specify in the Custom setting time zone the start and end dates for summer time.
4 Click on Send.
Fax 121

You can use the printer in different ways to send faxes to one or more recipients. You can type the email address or use a shortcut number or the address book. You can also use the Multi Send or MyShortcut application from the printer's start screen. See "Activate Applications in the Start screen" on page 24 for more information.
1 Place an original document with the printed side facing up and the short side first in the ADF tray or with the imprinted side facing down on the glass plate.
2 If you insert a document into the ADF drawer, you need to adjust the paper guides.
3 Touch Faxes On in the start screen.
4 Enter the fax number or a shortcut.
5 Touch Faxes On.
1 Open the Print dialog from the document you want to fax.
2 Select the printer and then click Properties, Preferences, Options or Set.
3 Click on Fax > Enable Fax and then enter the fax number/fax numbers of the recipient.
4 Configure the other fax settings if necessary.
5 Apply the changes and then send the fax job.
1 Open the document you want and click Archive > Print.
2 Select the printer.
Fax 122

3 Enter the fax number of the recipient and then configure other fax settings if necessary.
4 Send the fax job.
Fax shortcuts work like the numbers on a telephone or fax machine under speed dials. A quick coupler number (1 .a. .999) may contain one or more receivers.
1 Insert an original document with the printed side facing upwards and the short side first into the automatic document input or with the imprinted side down on the glass plate.
2 If you insert a document into the ADF drawer, you need to adjust the paper guides.
3 Press the printer's control panel # and enter the shortcut number with the keypad.
4 Touch Faxes On.
You can search the address book for bookmarks and network directory servers. For more information about enabling the address book function, please contact the system support department.
1 Place an original document with the printed side facing up and the short side first in the ADF tray or with the imprinted side facing down on the glass plate.
2 If you insert a document into the ADF drawer, you need to adjust the paper guides.
3 In the start screen, browse for:
> Specify the recipient name Search
4 Touch the recipient's name and touch it Faxes On.
1 Place an original document with the printed side facing up and the short side first in the ADF tray or with the imprinted side facing down on the glass plate.
Fax 123 · Faxes >

2 If you insert a document into the ADF drawer, you need to adjust the paper guides.
3 In the start screen, browse for:
Faxes > Enter fax number > Send delayed
4 Specify the time you want to send the fax and hit
On.
The time is increased or reduced by 30 minutes.
5 Touch Faxes On.
You can assign a shortcut to one fax number or group with fax numbers.
1 Open a web browser and type the printer IP address in the address bar.
2 Click on Institutions > Manage shortcuts > Fax Quick Link Settings.
3 Type a name for the shortcut and enter the fax number.
Fax 124

4 Please assign a shortcut number.
5 Click on Add.
1 Hit in the home screen Fax and enter the fax number.
On.
3 Type a unique name for the shortcut and hit it afterwards Done On.
4 Check if the name of the shortcut is correct and then hit OK On.
1 Place an original document with the printed side facing up and the short side first in the ADF tray or with the imprinted side facing down on the glass plate.
2 If you insert a document into the ADF drawer, you need to adjust the paper guides.
3 In the start screen, browse for:
Fax > Enter the fax number > Options
4 In the Resolution section, touch arrows to set the desired resolution.
5 Touch Faxes On.
1 Place an original document with the printed side facing up and the short side first in the ADF tray or with the imprinted side facing down on the glass plate.
Faxes 125 · 2 Touch

2 If you insert a document into the ADF drawer, you need to adjust the paper guides.
3 In the start screen, browse for:
Fax > Enter the fax number > Options
4 Adjust the intensity of the fax and press Faxes.
1 Open a web browser and type the printer IP address in the address bar.
2 Click on Institutions > Reports.
3 Click on Fax Task Log or on Choose Log Fax Numbers.
1 Open a web browser and type the printer IP address in the address bar.
2 Click on Institutions > Fax Settings > Analog Fax Settings > Block Fax Unnamed.
Faxes 126

1 Touch Cancel Tasks On the start screen.
The canceling tasks screen is displayed.
2 Touch the task or tasks you want to cancel.
Only three tasks are displayed on the screen. Touch the arrow down until the task you want is displayed and then touch the task that you want to cancel.
3 Touch Delete selected tasks On.
The Selected Tasks screen will be deleted and the selected tasks will be removed. The start screen is then displayed.
This option allows you to queue received faxes so that they are not printed until you give permission. You can manually pull faxes from the queue or at a scheduled date or time.
1 Open a web browser and type the printer IP address in the address bar.
2 Click on Institutions > Fax Settings > Analog Fax Settings > Fax queue.
Faxes 127

Choose from the following content sources:
This option allows you to adjust the quality of the fax executed. A higher image resolution increases the file size and takes longer to scan your original document. By lowering the image resolution, the file becomes smaller.
Select one of the following options:
This option allows you to indicate how much lighter or darker the faxes should be compared with the original document.
This option allows you to send a fax at a later date or on a later day.
This option allows you to change the following settings:
This option allows you to view the first page of the image before it is included in the fax. When the first page is scanned, a short pause follows and then the preview is displayed.
Faxes 129

Choose from the following settings:
Faxes 130

You can use the printer to send a file to an FTP address. You can type the email address or use a shortcut number or the address book. You can also use the Multi Send or MyShortcut application from the printer's start screen. See "Activate Applications in the Start screen" on page 24 for more information.
Scan to network allows you to scan documents for network locations specified by your system administrator. After the destinations (shared network folders) are set up on the network, the application must be installed and configured to the respective printer(s) with the Embedded Web Server. See 'Configure Scan through a Network' on page 27 for more information.
You can create a permanent FTP destination and assign a shortcut number to it so that you do not have to enter the full address of the FTP site on the printer's control panel every time you want to send a document to an FTP server. You can create shortcut numbers in two ways: with the Embedded Web Server and with the printer's control panel.
1 Open a web browser and type the printer IP address in the address bar.
2 Go to:
Institutions > area Other institutions > Manage shortcuts > Settings FTP Shortcut
3 Enter the correct data.
4 Enter a shortcut number.
5 Click on Add.
Scan 131

1 In the start screen, browse for:
FTP > FTP > type the FTP address >
> Enter a name for shortcut > Done
2 Check if the name of the shortcut is correct and then hit OK On.
1 Place an original document with the printed side facing up and the short side first in the ADF tray or with the imprinted side facing down on the glass plate.
2 If you insert a document into the ADF drawer, you need to adjust the paper guides.
3 Browse the printer's control panel to:
FTP > FTP > type the FTP address > Done > Send
1 Place an original document with the printed side facing up and the short side first in the ADF tray or with the imprinted side facing down on the glass plate.
2 If you insert a document into the ADF drawer, you need to adjust the paper guides.
3 Press the printer's control panel keypad # and enter the FTP shortcut number.
> Send.
1 Place an original document with the printed side facing up and the short side first in the ADF tray or with the imprinted side facing down on the glass plate.
Scan 132 · 4 Press

2 If you insert a document into the ADF drawer, you need to adjust the paper guides.
3 In the start screen, browse for:
> Specify the recipient name Search
4 Touch the recipient's name.
> Send.
You can use the printer to send a scanned file. You can also use Scan to network, send multiple items and my shortcut from the printer's start screen. See "Activate Applications in the Start screen" on page 24 for more information.
Use the ADI for multi-page documents.
Use the glass plate for one page, small objects (such as postcards or photographs), transparents, photo paper or thin material (suchas cuttings from magazines).
The scanner allows you to scan documents directly to a computer or to a flash drive. The computer does not need to be directly connected to the printer in order to receive images via Scanning to PC. You can scan the document via network to your computer by creating a scanning profile on your computer and then downloading it onto the printer.
1 Open a web browser and type the printer IP address in the address bar.
Scan 133 · 5 Press · ADI Glass plate

2 Click on Scan Profile > Create Scan Profile.
3 Select the scan settings and click Next.
4 Select a location on your computer where you want to save the scanned image.
5 Type a scan name and username.
6 Click on Send.
7 View the instructions on the Scan Profile screen. a Place an original document with the printed side facing up and the short side first in the ADF-
drawer or with the printed side facing down on the glass plate.
c Perform any of the following actions:
8 View the file on the computer.
1 Open the Printers folder, then select your printer.
2 Open the printer properties and adjust settings if necessary.
Scan 134

3 Hit the control panel Scan to Computer to > select the appropriate scan settings > Send.
1 Place an original document with the printed side facing up and the short side first in the ADF tray or with the imprinted side facing down on the glass plate.
2 If you insert a document into the ADF drawer, you need to adjust the paper guides.
3 Place the flash drive in the USB port at the front of the printer.
4 Select the destination folder and hit Scan to USB drive On.
5 Adjust the scan settings and then click Scan.
You can use the Lexmark ScanBackTM utility instead of Embedded Web Server to create profiles for scanning into a computer. You can download the ScanBack utility from Lexmark's support website http://support.lexmark.com.
1 Set a profile for scanning to a computer: a Open the ScanBack utility. b Select the printer.
If no printers are displayed, contact your system administrator or click Set to manually search for an IP address or host name. c Follow the instructions on your screen to indicate which type of document is scanned and what type
output you want to make. d Enter a file name for the scan profile and select a location on your computer. e Click on Complete.
A dialog box will be displayed with your scan profile information and the status of the images received.
2 Scan your original documents: a Place all pages in the ADI or on the glass plate. b Browse the printer's control panel to:
Waiting tasks > Profiles and apps > select your scan profile
Scan 135

This option allows you to enter the IP address for the FTP destination.
This option allows you to enter the file name for the scan image.
This option allows you to save the current settings as shortcut by assigning a number.
This sets the paper format for the documents you are going to scan. If you set Original format to Combination formats, you can scan an original document containing different paper sizes (pages of the Letter and Legal format).
This option allows you to indicate how much lighter or darker the scanned documents should be compared with the original document.
This option allows you to customize the output quality of your file. A higher image resolution increases the file size and takes longer to scan your original document. By lowering the image resolution, the file becomes smaller.
This option allows you to set the type of output for the scan image.
Select one of the following options:
Scan 136

Choose from the following settings:
Scan 138

Printer Menu Information 139
Menu Overview
Paper Menu Reports Network/ports Security
Edit Security Settings Various security settings
U-loader configuration Different format
Clear Temporary Data Files Menu
Network Settings Page1
Parallel [x] Serial [x ]
Network Instell.pag.
Log File Security Checker Set date and time
Shortcut list Fax joblog Choose fax numbers
Paper Settings Custom Types
Custom Names Custom Scan Formats
FTP Shortcuts Profile List Print fonts
Settings Help Manage Shortcuts Menu Option Card3
A list of installed DLEs (downloademu-lators) is displayed.
Copy Manual Mailing Manual
Email Settings FTP settings Menu Flash drive
Fax manual Manual FTP Print failure manual
1 Depending on the printer configuration, this menu item is displayed as a Network Configuration page or Network Settings Page [x].
2 Depending on the printer settings, this menu is displayed as a default network or Network [x].
3 This menu is only displayed if one or more DLEs are installed.

Information about the printer menus 140
Set a default paper source for all printing tasks.
Tray [x] Multifunction input Manual paper- input Manual envelope- input
Specify the size of the paper in each tray.
A4 A5 A6 JIS-B5 Letter Legal Executive Oficio (Mexico) Folio Statement Universal 7 3/4 -envelope 9-envelop DL -enfold C5-enfold B5-Envelop Other envelope

Printer Menu Information 141
Specify the type of paper in each tray.
Normal Paper Cardboard Transparent Circuit Labels Vinyl Labels Bank Post Envelope Raw Envelopes Letterhead Preprinted Coloured Paper Light Paper Heavy Paper Crude/cotton Custom Type [x]
Specify the paper format in multifunctional input.
A4 A5 A6 JIS B5 Letter Legal Executive Oficio (Mexico) Folio Statement Universal 7 3/4 -envelope 9-envelop DL -enfold C5 envelope B5 envelope Other envelope
Select Function · Type of tray [x] · Universal charger format

Printer Menu Information 142
Specify the paper format in multifunctional input.
Normal Paper Cardboard Transparent Circuit Labels Vinyl Labels Bank Post Envelope Raw Envelopes Letterhead Preprinted Coloured Paper Light Paper Heavy Paper Crude/cotton Custom Type [x]
Paper size handm. import
Specify the size of the paper you manually place.
A4 A5 A6 JIS B5 Letter Legal Executive Oficio (Mexico) Folio Statement Universal
Paper type handm. import
Specify the type of paper to be placed manually.
Normal Paper Cardboard Transparent Circuit Labels Vinyl Labels Bank post Letterhead Preprinted Coloured paper Light Paper Heavy Paper Raw/cotton Customized kind [x]
Select Function · Universal Charger Type

Printer Menu Information 143
Envelope size handm. import
Specify the envelope format you are manually placing.
7 3/4 -Envelope 9-envelope 10-enfold DL -Enfold C5-enpack B5-Envelopes Other Envelope
Envelope type of handm. import
Specify the type of envelope you need to be placed manually.
Envelope Raw envelope Custom type [x]
Determine when the printer must select paper that is placed in the universal loader.
Replace a specified paper format if the desired paper size is not available.
From Statement/A5 Letter/A4 All in List
Specify the relative structure of the placed normal paper.

Printer Menu Information 144
Specify the relative structure of the placed cardboard.
Specify the relative structure of the placed transparents.
Strick. kollen. pap.
Specify the relative structure of the placed recycled paper.
Specify the relative structure of the labels placed.
Specify the relative structure of the placed bank note.
Specify the relative structure of the envelopes placed.
Specify the relative structure of raw envelopes.
Specify the relative structure of the letterhead paper placed.
Specify the relative structure of the preprinted paper placed.
Specify the relative structure of the placed coloured paper.
Specify the relative structure of the paper placed.

Printer Menu Information 145
Specify the relative structure of the paper placed.
Specify the relative structure of the cotton paper placed.
Specify the relative structure of the attached paper.
Specify the relative weight of the normal paper placed.
Specify the relative weight of the cardboard placed.
Specify the relative weight of the placed transparencies.
Weight kringl.dap.
Specify the relative weight of the recycled paper placed.
Specify the relative weight of the labels placed.
Specify the relative weight of the bank note issued.
Specify the relative weight of the envelopes placed.

Printer Menu Information 146
Specify the relative weight of the rough envelopes placed.
Specify the relative weight of the letterhead paper placed.
Specify the relative weight of the preprinted paper placed.
Specify the relative weight of the coloured paper placed.
Specify that the relative weight of the paper placed is low.
Indicate that the relative weight of the paper placed is high.
This gives you the relative weight of the cotton paper or raw paper placed.
Specify the relative weight of the adjusted paper placed.
Kringl.dap. places
Determine and set that all printing tasks are printed in double-sided form using Kringlooppaper.

Printer Menu Information 147
Determine and set that all printing tasks are printed in two-sided form with Bankpost as paper type.
Determine and set that all printing tasks are printed double-sided with Letterhead as paper type.
Determine and set that all printing tasks are printed double-sided with Pre-printed paper.
Determine and set that all printing tasks are printed in double-sided form with Colored paper.
Determine and set that all printing tasks are printed with Light as paper type double-sided.
Determine and set that all printing tasks are printed double-sidedly with Heavy paper.
Determine and set that all printing tasks are printed double-sided using Custom [x] as a paper type.
Linking a paper type or special material to a standard name or custom name created by a user using the Embedded Web Server or with MarkVisionTM Professional.
Paper Cardboard Transparency Raw/cotton Labels Envelope

Printer Menu Information 148
Please indicate a type of paper when selected in other menus.
Paper Cardboard Transparency Raw/cotton Labels Envelope
Custom Name [x] Please specify a custom name for a paper type. This name replaces the Custom Name
type [x] in the printer menus.
Specify a name, format and print mode for the custom scan format.
Scan Size Width Height Print Mode 2 scans per side Off
Give up the unit of measurement.

Information about the printer menus 149
Set the width of the upright direction.
Set the height of the upright direction.
Specify the input direction if paper can be loaded in both directions.
Short Side Long Side
Print a report with the current printer menu settings. The report also contains information on the supply status and a list of installed hardware options.
Device statistics Print a report with printer statistics, such as data on supplies and the number of pages printed.
Test non-device Print a report to check that the nonfinisher is working correctly.
Pag. Network setup. This will print a report containing information about the printer's network settings.
Network <x>Instell.pag.
This will print a report containing information about the printer's network settings.
Print a report with information about configured shortcuts.

Printer Menu Information 150
Fax Task Log Print a report with information on the last 200 faxes.
Choose Log Fax Numbers Print a report with information on the last 100 attempts to place a call, the received calls and the blocked calls.
Print a report with information about copy shortcuts.
Print a report with information about email shortcuts.
Fax Shortcuts Print a report with information on fax shortcuts.
FTP Shortcuts Print a report with information about FTP shortcuts.
Profile List A list of profiles prints stored on this printer.
Print a report of all available fonts for the printer language currently set in the printer.
Print Directory This will print a list of all sources stored on an optional flashgeheu card or hard drive.
Assets report Print a report with asset data, including the serial number and printer model name. The report contains text and UPC indent codes that can be scanned in a quality database.
This will print out an overview of recorded events.
Automatically [list of available network cards]
![Page 151 of the Lexmark MX617 user manual — Default Network or Network Menu [x]](/cdn/reader/61/6184d65d718c5884ad89ad8cf74e45a0886e1933c90ecb13e88bf34df57e7d35/images/page-151.webp?w=400)
Printer Menu Information 151
This limits power consumption if the printer does not receive data from the Ethernet network.
This configures the printer to automatically switch to PCL emulation if required by a printing job, regardless of default printer language.
This configures the printer to automatically switch to PS emulation if required by a printing job, regardless of default printer language.
Set whether the printer should perform the special processing for bidirectional communication, as defined in the specifications of the NPA protocol.
Set the size of the network input buffer.
Automatically 3 KB to [maximum allowed size]
Temporaryly save print jobs to the printer's hard drive before printing. This menu will only be displayed if a formatted hard drive is installed.

Printer Menu Information 152
Set printer to process binary PostScript printing tasks for Macintosh.
Set default network setting or Network [x]
Display and configure the printer's network settings.
Reports Network Card TCP/IP IPv6 Wireless AppleTalk
You can open the menu as follows:
Printer setting page Print a report with information about the network printer's settings, such as
TCP/IP address.
Browse the menu in one of the following ways:
Display the connection status of the wireless network adapter.
Show map speed Display the speed of an active wireless network adapter.
Show the network addresses.
Set after how many seconds a print job specified over the network can be cancelled.

Printer Menu Information 153
Print a banner page with the printer.
Browse the menu in one of the following ways:
Set host name Set the current TCP/IP hostname.
IP Address View or modify the current TCP/IP address.
Netmask View or modify the current TCP/IP netmask.
Gateway View or modify the current TCP/IP gateway.
Specify the DHCP address and parameter allocation.
Specify the RARP address allocation setting.
Specify the setting for allocation of the BOOTP address.
Specify the network zero configuration setting.
Enable the built-in FTP server, which allows you to send files to the printer via file transfer protocol.
Enable the built-in web server (Embedded Web Server). If enabled, the printer can be remotely checked and managed via a web browser.
WINS Server Address View or change the current WINS server address.
View or modify the current DDNS setting.

Printer Menu Information 154
View or modify the current mDNS setting.
DNS Server Address View or modify the current DNS server address.
Backup DNS server address View or modify the backup DNS server address.
View or modify the current HTTPS setting.
To open the menu, proceed as follows:
Enable IPv6 on the printer.
Autom. configuration
Set whether the network adapter accepts IPv6 addresses automatically configured by a router.
Set host name Set the host name.
Enable DHCPv6 on the printer.
You can open the menu as follows:

Printer Menu Information 155
Wi‑Fi Protected Setup (WPS)
Set up a wireless network connection and enable network security.
Start a push button method Starting PIN
Automatically determine which connection method uses an access point with WPS: Start a pushbutton or start a PIN.
Specify network mode.
Specify the wireless network usage standard for the wireless.
802.11b/g 802.11b/g/n
Choose Network Select a available network for the printer.
Display signal strength Display the quality of wireless connection.
Display the wireless network encryption method.
You can open the menu as follows:
Toggle support for AppleTalk.
Show Name Display the assigned AppleTalk name.
Show Address Display the assigned AppleTalk address.

Printer Menu Information 156
Display a list of AppleTalk zones available on the network.
[list of zones available on the network]
Set the printer to automatically switch to PCL emulation if required by a print job on the USB port, regardless of default printer language.
Set the printer to automatically switch to PS emulation if required by a print job on the USB port, regardless of default printer language.
Set whether the printer should perform the special processing for bidirectional communication, as defined in the specifications of the NPA protocol.
Set the size of the USB input buffer.
Disabled Automatic 3 KB to [maximum allowed size]
![Page 157 of the Lexmark MX617 user manual — Parallel Menu [x]](/cdn/reader/61/6184d65d718c5884ad89ad8cf74e45a0886e1933c90ecb13e88bf34df57e7d35/images/page-157.webp?w=400)
Printer Menus Information 157
Temporaryly save print jobs to the printer's hard drive before printing.
Set printer to process binary PostScript printing tasks for Macintosh.
Set up network address data for an external print server.
yyy.yyy, yy, yo
Set up network mask data for an external print server.
yyy.yyy, yy, yo
Set up gateway data for an external print server.
yyy.yyy, yy, yo
Set printer to automatically switch to PCL emulation if required by a printing job on a serial port, regardless of the default printer language.
Set printer to automatically switch to PS emulation if required by a printing job on a serial port, regardless of the default printer language.
![Page 158 of the Lexmark MX617 user manual — Parallel Menu [x]](/cdn/reader/61/6184d65d718c5884ad89ad8cf74e45a0886e1933c90ecb13e88bf34df57e7d35/images/page-158.webp?w=400)
Printer Menu Information 158
Set whether the printer should perform the special processing for bidirectional communication, as defined in the specifications of the NPA protocol.
Set the parallel input buffer size.
Disabled Automatic 3 KB to [maximum allowed size]
Temporaryly save print jobs to the printer's hard drive before printing.
Enable bidirectional communication through the parallel port.
Set protocol for the parallel port.
![Page 159 of the Lexmark MX617 user manual — Serial Menu [x]](/cdn/reader/61/6184d65d718c5884ad89ad8cf74e45a0886e1933c90ecb13e88bf34df57e7d35/images/page-159.webp?w=400)
Printer Menu Information 159
Determine whether the printer honours printer hardware initialization requests from the computer.
Determine how the parallel port data is sampled at the front or back of the strobe.
Set printer to process binary PostScript printing tasks for Macintosh.
Set up network address data for an external print server.
yyy.yyy, yy, yo
Set up network mask data for an external print server.
yyy.yyy, yy, yo
Set up gateway data for an external print server.
yyy.yyy, yy, yo
Set printer to automatically switch to PCL emulation if required by a printing job on a serial port, regardless of the default printer language.
![Page 160 of the Lexmark MX617 user manual — Serial Menu [x]](/cdn/reader/61/6184d65d718c5884ad89ad8cf74e45a0886e1933c90ecb13e88bf34df57e7d35/images/page-160.webp?w=400)
Printer Menu Information 160
Set printer to automatically switch to PS emulation if required by a printing job on a serial port, regardless of the default printer language.
Set whether the printer should perform the special processing for bidirectional communication, as defined in the specifications of the NPA protocol.
Set the size of serial input buffer.
Disabled Automatic 3 KB to [maximum allowed stan size]

Printer Menu Information 161
Temporaryly save print jobs to the printer's hard drive before printing.
The hardware and software handshaking settings for the serial port select.
Determining whether the printer's availability is reported to the computer.
Set the speed at which data can be received via serial port.
1200 2400 4800 9600 19200 38400 57600 115200 138200 172800 230400 345600
Set how many databits are sent per transmission frame.

Information about the printer menus 162
Set the parity for serial input and output frames.
Odd No Ignore
Determine whether or not the printer uses the DSR signal.
Primary SMTP gateway Specify data for the SMTP server gateway and port.
5.7.330 Specify after how many seconds the server ends an attempt to send email.
Answer Address Specify a reply address of up to 128 characters in email messages sent by the printer.
Set printer to use SSL for additional security when connecting to the SMTP server.
Specify which type of user authentication is required for email scanning.
No verification required Login/Plain (NORMAL) CRAM-MD5 Digest-MD 5 NTLM Kerberos 5

Printer Menu Information 163
E-mail initiated by the device
Specify which references are used when communicating with the SMTP server.
Do not use SMTP device references
User initiated e-mail
Do not use SMTP device references Username and session password Use email address and session wait-word
Create a spare password.
Customize settings for internal accounts, NTLM, simple Kerberos, Kerberas, Active Directory, LDAP, password and PIN.
Internal accounts NTLM Configuration Kerberos (easy) Kerberas settings Active Directory LDAP LDAp+GSSAPI Password Pincode

Printer Menu Information 164
Add or edit a security template.
[list of available templates]
Manage access to the printer menu folders, firmware updates, waiting tasks and other access points.
Manager Menus Access to Functions Management Solutions Cancel tasks on the device
Limit the number and time frame of failed login attempts from the printer's control panel before all users are blocked.
Failed login Time frame for failed attempts Lockout time time out to sign in via bedi-ning panel Timeout for external login
Jumper for reset security
Adjust the security settings.
No effect Access management = "No security" Restore standard factory settings

Printer Menu Information 165
Allow users to request a server certificate.
Require Try Never Allow
1.1.416 Limit the number of digits in the PIN.
Max. invalid PIN
Limit the number of times an invalid PIN code can be entered.
Set a time limit for keeping confidential printing tasks.
From 1 hour 4 hours 24 hours 1 week
Set a time limit for keeping confidential printing tasks.
From 1 hour 4 hours 24 hours 1 week

Printer Menu Information 166
Set a time limit for the storage of confidential printing tasks requiring verification.
From 1 hour 4 hours 24 hours 1 week
Set a time limit for saving print jobs that are printed at a later date.
From 1 hour 4 hours 24 hours 1 week
With temporary data files you only erase print data on the printer's hard drive that are currently not used by the file system of the printer hard disk. All permanent data from the printer's hard drive, such as downloaded fonts, macros and queued tasks, will be retained.
Specify mode for deleting temporary databases.
Mark all disk space used by a previous print job. This method does not allow the file system to re-use that space before it is cleaned up.
One passage Multiple transits

Printer Menu Information 167
Export Log Set up a competent user to exploit the security log file.
Specify or delete control logs.
Specify how control logs are configured.
Yes No Enable external system log
No Yes External system log server
[series of 256 characters] External system log port
Normal UDP Tunnel External system log
0.0.20023 Behaviour at log full
Replace oldest items Log by email and then delete all items

Printer Menu Information 168
Specify how control logs are configured.
Administrator's Email Address
[series of 256 characters] Sign export digitally
Out To Ernst of events to log in
0-7 External system log for unconfirmed events
No Yes Notification level % vol
No Yes Rule ends log
LF (\n) CR (\r) CRLF (\R\n).
Current date and time Display the current printer date and time settings.
Manual Date & Time Set Give the date and time.
Option To · Configure Log (continued) · Option Result

Printer Menu Information 169
Time zone Select the time zone.
Set the printer to use the appropriate start and end time of summer time according to the printer's time zone setting.
Allow user to set the time zone.
First week summer time First day summer time first month summer time start time summer time last week summertime last day summertime final moon summer time end time summertime shift
Enable the network time protocol, which synchronizes devices' clocks in a network.
NTP Server Display the NTP server address.
Enable or disable the verification setting.

Printer Menu Information 170
Select the language of the text on the display.
English Francais Deutsch Italiano Espanol Dansk Norsk Dutch Swedish Portuguese Suomi Russian Polski Greek Magyar Turkce Cesky Simplified Chinese Traditional Chinese Korean Japanese
Estimates of the supplies on the control panel, Embedded Web Server, display menu settings and statistics reports from the device.
Show estimates Do not show estimates
Minimize the use of energy, paper or special printing material.
From Energy Energy/paper Paper
Enable a beep for ADF when placing paper.
Limit the sound of the printer.
Run the installation wizard.

Printer Menu Information 171
Specify a language and information for the custom key on the keyboard in the display.
English Francais Francais Canadien Deutsch Italiano Espanol Greek Dansk Norsk Dutch Swedish Suomi Portuguese Russian Polski Swiss-French Korean Magyar Turkce Cesky Simplified Chinese Traditional Chinese Japanese Customized key [x]
This will specify the size units for paper formats.
VS. Metric
Scan to PC Port Range
Specify a valid port range for printers behind a firewall that blocks ports.

Printer Menu Information 172
Specify what information is displayed in the top corners of the start screen.
Choose from the following settings:
No IP address Hostname Contact person Location Date/Time mDNS/DDNS service name Name configurationless program Custom text [x] Model name
Adjust the text displayed in the top corners of the start screen.
Specify the displayed information for black toner. Choose from the following settings:
Do not display Display Messages to be displayed

Printer Menu Information 173
This allows you to change the displayed information for certain menus.
Paper fixed Place paper Errors requiring maintenance
Choose from the following settings:
Yes No Messages to be displayed
Change the icons displayed in the start screen. Choose from the following settings:
Change language Copy shortcuts Faxes Fax Shortcuts Email Mail shortcut FTP FTP shortcut search Wait tasks USB drive Profiles and apps Bookmarks Tasks by user Forms and favorites Copy pass Scan to network My shortcut
This sets the notation of the printer date.
MM‑DD‑JJJJ DD‑MM‑JJJJ JJJJ‑MM‑DD
This sets the notation of the prince time.
12-hour clock 24-hour clock
20.0.100 Adjust the brightness of the display.

Printer Menu Information 174
Copy of one page
Set that one page may be copied at a time via the glass plate.
Set the volume of the button and feedback.
Set up or bookmarks will appear in the waiting task section.
Specify whether to delete an image in the background.
This scans multiple tasks to one file.
Specify how a scanned task should be reloaded if there is a paper failure in the ADI.
30.10.300 Set the time before the Embedded Web Server is renewed.
Contact Enter a contact for the printer.
Location Specify the location of the printer.
This sets an alarm signal that is played when the user has to intervene.
Choose from the following settings:
From One Time Continuous
Set after how much time to be inactive the printer switches on standby mode.

Printer Menu Information 175
Set after how much time to be inactive the printer switches to sleep mode.
Print a task while the display is disabled.
Print while the display is off
Print while the display is off Allow Display to be displayed during printing
This will set up the printer after how much time it switches to slumber mode.
Disabled 20 minutes 1 hour 2 hours 3 hours 6 hours 1 day 2 days 3 days 1 week 2 weeks 1 month
Snooze timeout on connection
Set the printer to slumber mode even if there is an active Ethernet connection.
Do not enable sleep mode slumber
Set after how much time to be inactive the printer returns to work mode Done.
Set the printer to stop a print job after it is inactive for a certain time.
Set how long the printer waits for further data before the print job is cancelled.

Printer Menu Information 176
Set how long the printer waits for an action from the user before the printer sets tasks that require non-available sources.
Set the printer to restart if an error occurs.
Restart at inactive mode Always restart Never restart
Set the number of times auto restarting that the printer can run.
Auto Restart Limit
This will give the printer an automatic print order if certain offline situations are not resolved within the specified time frame.
Specify whether to reprint the printer's blocked pages.
Set the printer to automatically check if paper is stuck.
Set the printer to print the correct output for a page.
Stay at the same location and reset the screen timeout instead of returning to the home screen.

Printer Menu Information 177
Adjust the speech rate of spoken guidance.
Very Slow Slow Normal Fast Fast Very Fast Superfast Extremely fast Fastest
Set the volume of headphones.
Determine how the printer reacts in inactive mode when briefly pressing the sleep button.
Do nothing Sleeping Sleep
Determine how the printer reacts in inactive mode when pressing a long sleep button.
Do nothing Sleeping Sleep
Restore the printer's default settings.
Do Not Restore Now Recover
Export configuration files to a flash drive.
Specify the contents of the original document.
Text Illustrations Text/photo Photo

Printer Menu Information 178
Specify how the original document was produced.
Black and white laser Color Laser Inkjet Photo/film Magazine Newspaper Print Other
Specify whether an original document is printed in two sides or one sided and then set if it needs to be copied on a double side or single side.
One-sided to one-sided 1-sided 2-sided to two-sided 2-sided
Copy two or four sheets of a document on one page.
From 2 per sheet, standing 4 per sheet , standing 2 per sheets, lying 4 per skin, lying
Page border print.
Set whether you want to print page borders.
Keep the pages of a print job in order when printing multiple copies.
(1,1,1) (2,2,2) (1,2,3) (1,2,3)
This will enable the nonfinisher.

Printer Menu Information 179
Specify the format of the original document.
Letter Legal Executive Folio Statement Oficio (Mexico) Universal Format Automatically Fix Combined Formats A4 A5 A6 JIS B5 Custom Scan Size [x] Book Original Business Cards 3 x 5 inch 4 x 6 in Identity Card
Specify the copy job paper source.
Tray [x] Automatic Format Adjustment Universe Reader
Place a sheet of paper between transparents.
Place a sheet of paper between pages, copies or tasks.
Out Between copies Between tasks Between pages
Specify the source of paper for the separation sheet.
1.1.19 Make printing lighter or darker.
1-9999 Specify the number of copies for the copying task.

Printer Menu Information 180
Specify the header or footer data and location of this information on the page.
From Date/Time Page Number Custom Text Print on
Choose from the following location options:
All Pages First Page Only Anything but first page Custom Text
Specify the overlay text that is printed on each page of the copy job.
Confidential Copy Concept Urgent Custom Out
Custom Overlay Specify a custom overlay text.
Allow priority copies
Allow printing job to be interrupted for copying a page or document.
Scan a document with different paper formats using one copy job.
Allow save as shortcut
Save the custom copy settings as shortcuts.
Set how much of the background is visible on a copy.
4 to 4
Automatically center the content on the page.

Printer Menu Information 181
Specify which color is filtered out and adjust in the filter setting for each colour threshold.
No Red Green Blue Default threshold red
Specify the contrast for the copy job.
0-5 Best content setting
Create a mirror image of the original document.
Create a negative image of the original document.
Adjust the visibility of shadow details to a copy.
4 to 4
Adjust Lack of Items in ADI
Correct some of the items in the scanned image.
Scan Border to Edge
This allows you to set that the original document is scanned from edge to border.
1-5 Set the sharpness of a copy.
Create an example copy of the original document.
In the Analog Fax Settings mode, fax tasks are sent via a telephone line.

Printer Menu Information 182
Reset Factory Settings Restore factory settings for all fax settings.
Optimize Fax Compatibility Optimize fax compatibility with other fax machines.
Fax Name Specify the name of the fax machine in the printer.
Fax number This specifies the number assigned to the fax.
Specify how the fax is indicated.
Set the printer to be faxed manually via a telephone line splitter and a phone.
Define the allocation of the relative amount of non-volatile memory used for sending and receiving fax tasks.
Receive All Usually Receive Same Send Mainly Send All
Specify whether to cancel fax orders.
Specify which type of track view is used.
Specify which side numbers are hidden in a number for an outgoing fax.
From left From right
0.0.158 Specify the number of digits hidden in an outgoing fax number.

Printer Menu Information 183
Configure the fax cover.
Default Off Default Enable Never Use Always Show To Field
Show To From From Field
Show to Out of Message field
To Record Out Message Logo
Record to Out of Footer [x]
On Out of Footer [x]
Specify the quality in dpi (dots per inch). A higher resolution offers better print quality, but also leads to longer shipping time for outgoing faxes.
Standard Fine 200 dpi Superfine 300 dpi Ultrafine 600 dpi

Printer Menu Information 184
Specify the format of the original document.
Letter Legal Executive Tabloid Folio Statement Oficio (Mexico) Universal Format Automatically Fix Combined formats A3 A4 A5 A6 JIS B4 JISB5 Custom Scan Size [x] Book Original Business Cards 3 x 5 inch 4 x 6 inch
Specify the print mode for original documents loaded into automatic document input for double-sided scanning.
From Long Side Short Side
Specify the contents of the original document.
Text Illustrations Text/photo Photo
Specify how the original document was produced.
Black and white laser Color Laser Inkjet Photo/film Magazine Newspaper Print Other
1.1.19 Make printing lighter or darker.
Choose Prefix Enter a prefix, for example 99. There's a numerical input field.
Set a line for the prefix.

Printer Menus Information 185
0.7.19 Specify how often the printer should try to send a fax to the given number.
Reset number
1 January 2000 Specify the number of minutes between each dialing attempt.
Toggle the dialling without dialing.
Toggle the error correction mode for fax tasks.
File faxes scanned with the printer.
Allow faxing tasks to be sent through the printer driver.
Allow save as shortcut
Save fax numbers as a shortcut on the printer.
This will specify a dial sound.
Max. speed
Specify the maximum speed in Baud with which faxes are sent.
2400 4800 9600 14400 33600
Scan a document with different paper formats to one file.
Specify whether to display an example on the display when scanning tasks are displayed.
Set how much of the background is visible on a scanned image.
4 to 4

Printer Menus Information 186
Enable color balance for the colors in the scanned image.
Cyan - Red Magenta - Green Yellow - Blue
Specify which color is filtered out during scanning and adjust the filter in-store for each colour threshold.
No Red Green Blue Default threshold red
Specify the contrast of the scanned image.
0-5 Best content setting
Create a mirror image of the original document.
Create a negative image of the original document.
Adjust the visibility of shadow details.
4 to 4
Adjust Lack of Items in ADI
Correct slightly crooked items in the scanned image.
Scan Border to Edge
Specify whether the original document is scanned from edge to border before faxing.
1-5 Set the focus of a fax.
Specify poorer or cooler output. Cool output contains more blue than standard output and warm output contains greater red than the default output.
4 to 4

Printer Menu Information 187
Enable color faxes.
Default Off Default Enabled Never Use Always Use
Automatically convert color faxes to black and white
Convert all outgoing faxes to black and white.
As per the printer, faxing tasks can be received.
Show the number that sends in the incoming fax job.
Remove print jobs from queue if there are no available resources for the task.
No Toner Toner and supplies
1.1.725 Specify the number of call signals played before answering an incoming fax job.
Get the printer to answer an incoming fax job.
0.47.9 Enter a code on the telephone's numerical keypad to start receiving a fax.
Adjust the scale of an incoming fax job so that the fax on the paper fits in the specified input tray.
This will specify the paper source for printing incoming fax tasks.
Automatic Tray [x] Universe charger
Enable double-sided printing for incoming fax jobs.

Printer Menu Information 188
Enable that separation pages can be inserted into incoming fax tasks.
Out For task After job
Specify the source of paper for the separation sheet.
Specify an output tray for faxes received.
Print the transmission information at the bottom of each page from a received fax.
Max. speed
Specify the maximum speed in Baud with which faxes are received.
2400 4800 9600 14400 33600
Enable forwarding of received faxes to another recipient.
Print Print and Forward Forward
Specify the type of recipient to which faxes are sent.
Fax number E-mail FTP LDSS eSF
Forward to Shortcut Enter a shortcut number corresponding to the type of recipient (Fax, Email, FTP, LDSS or eSF).
Block Fax Unnamed
Block incoming faxes sent from a device without drive ID or fax ID.
List of blocked fax numbers
Enable the list of blocked fax numbers stored on the printer.
Set that the printer can queue received faxes so they are not printed until you give permission. You can manually pull faxes from the queue or at a scheduled date or time.
The Fax mode in queue
From Always to Manual Scheduled Waiting schedule Fax

Printer Menu Information 189
Specify whether prints should be enjoyed.
From 1 staple 2 staples 4 staples
This will set the printer to print color faxes with greyscale.
Set that a transmission log file is printed after each fax job.
Log Printing Do not print Log Printing Only in case of errors
Set a bug log file to be printed.
Never print Print on errors
Set that fax log files are printed automatically.
Specify the paper source for printing log files.
Specify whether the selected number or return drive or fax name is displayed on printed log files.
Remote station name Selected number
Enable access to the log file for fax tasks.
Enable access to the log file for selected fax numbers.
This specifies the drawer for the printed fax log.

Printer Menu Information 190
Specify the mode of speaker.
Always Off To Connection Always On
Set the loudspeaker volume to high or low.
Enable or disable the ringtone volume.
All bell signals Only one bell signal Only two bell signs Only three bells Only one or two bel signals Only two or three bel signs
Specify the call patterns used when the printer is calling.
In fax mode, the fax job is sent to a fax server for transmission.
By Classification Enter specific fax information.
Settings SMTP Specify SMTP data.
Primary SMTP gateway Specify data for the SMTP server port.
Specify the format for the image.
PDF (.pdf) XPS (.xps) TIFF (.tif)
Specify the contents of the original document.
Text Illustrations Text/photo Photo

Printer Menu Information 191
Specify how the content was originally produced.
Black and white laser Color Laser Inkjet Photo/film Magazine Newspaper Print Other
Specify the quality in dpi (dots per inch).
Standard Fine 200 dpi Superfine 300 dpi Ultrafine 600 dpi
1.1.19 Make printing lighter or darker.
Specify the print position of the scanned image.
Specify the format of the original document.
Letter Legal Executive Folio Statement Oficio (Mexico) Universal Format Automatically Fix Combined Formats A4 A5 A6 JIS B5 Custom Scan Size [x] Book Original Business Cards 3 x 5 inch 4 x 6 inch
Set that users can choose between TIFF files with one page or more pages. With a multiple-page scan to fax job, one TIFF file can be created that contains all the pages of the task or several TIFf files may be created each containing one page of the scanning task.
Enable receiving analogue faxes.

Printer Menu Information 192
Specify the data of the email server.
Send a copy of an email message to the sender.
Send me a copy
Never Showing Default Off Default Always On
Specify the maximum size for an email message.
Max. Email Size
Send a message when an email message exceeds the configured limit.
Wrsch at max file size.
Specify a domain name, such as the domain name of a company and limit email-to-domain votes to that domain.
Define the settings for web links of the mail server.
Webkopp. set
Server Login Password Path Filename Web Link
Specify the file format.
PDF (.pdf) TIFF (.tif) JPEG (.jpg) XPS (.xps) RTF ( .rtf) TXT (.txt)

Printer Menu Information 193
Configure the PDF settings.
1.2.
Normal High Secure PDF
Out To PDF Searchable
Specify the contents of the original document.
Text Illustrations Text/photo Photo
Specify how the original document was produced.
Black and white laser Color Laser Inkjet Photo/film Magazine Newspaper Print Other
Determine whether the printer captures and sends content in color.
Specify the resolution of the scan in dpi (dots per inch).
75 dpi 150 dpi 200 dpi 300 dpi 400 dpi 600 dpi
1.1.19 Make printing lighter or darker.
Specify the print position of the scanned image.

Printer Menu Information 194
Specify the format of the original document.
Letter Legal Executive Folio Statement Oficio (Mexico) Universal Format Automatically Fix Combined Formats A4 A5 A6 JIS B5 Custom Scan Size [x] Book Original Business Cards 3 x 5 inch 4 x 6 in
This will specify the print mode for original documents loaded into automatic document input for double-sided scanning.
From Long Side Short Side
Set the quality of a JPEG image for a photo based on the file size and quality of the image.
Best Content Setting 5.10.1990
5.10.290 Set the quality of an image with text based on the file size and quality of the image.
5.10.290 Set the quality of an image with text or a photo based on the file size and quality of the image.
5.10.290 Set the quality of a photo based on the file size and image quality.
Specify how images are sent.

Printer Menu Information 195
Set that users can choose between TIFF files with one page or more pages. When you scan multiple pages for an email job, you can create one TIFF file that contains all the pages of the task. You can also create multiple TIFF files that each contain one page of the task.
Specify the format used to compress TIFF files.
Set that a transmission log file is printed after each email job.
Log Printing Do not print Log Printing Only in case of errors
Specify the paper source for printing email log files.
Tray [x] Multifunction input
Enable Text/Photo mode for smaller files that are used with 1-bit imagers when Color is set to Off.
1 bit 8 bit
Copying a document containing different paper formats.
Specify whether to display an example on the display when scanning tasks are displayed.
Allow save as shortcut
Save email addresses as shortcuts.
Set how much of the background is visible on a scanned image.
4 to 4
Enable color balance for output.
Cyan - Red Magenta - Green Yellow - Blue

Printer Menu Information 196
Specify which color is filtered out and adjust in the filter setting for each colour threshold.
No Red Green Blue Default threshold red
Specify the contrast for output.
0-5 Best content setting
Create a mirror image of the original document.
Create a negative image of the original document.
Set how much shadow is visible on a scanned image.
4 to 4
Adjust Lack of Items in ADI
Correct slightly crooked items in the scanned image.
Scan Border to Edge
Set whether to scan the original document from edge to border.
1-5 Set the focus of a scanned image.
Specify poorer or cooler output. Cool output contains more blue than standard output and hot output contains greater red than the default output.
4 to 4
Cc:/bcc: use
Enable use of fields cc and bcc.

Information about the printer menus 197
Specify the file format.
PDF (.pdf) TIFF (.tif) JPEG (.jpg) XPS (.xps) RTF ( .rtf) TXT (.txt)
Configure the PDF settings.
1.2.
Normal High Secure PDF
Out To PDF Searchable
Specify the contents of the original document.
Text Illustrations Text/photo Photo
Specify how the original document was produced.
Black and white laser Color Laser Inkjet Photo/film Magazine Newspaper Print Other
Determine whether the printer captures and sends content in color.

Information about the printer menus 198
Specify the resolution of the scan in dpi (dots per inch).
75 dpi 150 dpi 200 dpi 300 dpi 400 dpi 600 dpi
1.1.19 Make printing lighter or darker.
Specify the print position of the scanned image.
Specify the format of the original document.
Letter Legal Executive Folio Statement Oficio (Mexico) Universal Format Automatically Fix Combined Formats A4 A5 A6 JIS B5 Custom Scan Size [x] Book Original Business Cards 3 x 5 inch 4 x 6 inch
This will specify the print mode for original documents loaded into automatic document input for double-sided scanning.
From Long Side Short Side
Set the quality of a JPEG image for photo based on the file size and quality of the image.
Best Content Setting 5.10.1990

Information about the printer menus 199
5.10.290 Set the quality of the text based on the file size and image quality.
5.10.290 Set the quality of an image with text or a photo based on its file size and image quality.
5.10.290 Set the quality of a photo based on the file size and image quality.
Set that users can choose between TIFF files with one page or more pages. When scanning multiple pages for an FTP task, one TIFF file can be created that contains all the pages of the job or several TIFf files may be created each containing one page of the task.
Specify the format used to compress TIFF files.
Specify whether you want to print the transmission log.
Log Printing Do not print Log Printing Only in case of errors
Specify a paper source for printing FTP log files.
Tray [x] Multifunction input
Enable Text/Photo mode for smaller files using 1-bit imagery.
1 bit 8 bit
File Name Specify a base file name.
Scanning custom task
Copy a document with different paper formats using one scan job.
Specify whether to display an example on the display when scanning tasks are displayed.
Allow save as shortcut
Setup that shortcuts can be created for FTP addresses.
Set how much of the background is visible on a copy.
4 to 4

Printer Menu Information 200
Enable color balance for output.
Cyan - Red Magenta - Green Yellow - Blue
Specify which color is filtered out and adjust in the filter setting for each colour threshold.
No Red Green Blue Default threshold red
Specify the contrast for output.
0-5 Best content setting
Create a mirror image of the original document.
Create a negative image of the original document.
Set how much shadow is visible on a scanned image.
4 to 4
Adjust Lack of Items in ADI
Correct some of the items in the scanned image.
Scan Border to Edge
Set whether to scan the original document from edge to border.
1-5 Adjust the focus of the scanned image.
Set that users can warmer or cooler the output color temperature. Cool output contains more blue than standard output and hot output contains greater red than the default output.
4 to 4

Printer Menu Information 201
Specify the file format.
PDF (.pdf) TIFF (.tif) JPEG (.jpg) XPS (.xps) RTF ( .rtf) TXT (.txt)
Configure the PDF settings.
1.2.
Normal High Secure PDF
Out To PDF Searchable
Specify the contents of the original document.
Text Illustrations Text/photo Photo
Specify how the original document was produced.
Black and white laser Color Laser Inkjet Photo/film Magazine Newspaper Print Other
Determine whether the printer captures and sends content in color.

Printer Menu Information 202
Specify the resolution of the scan in dpi (dots per inch).
75 dpi 150 dpi 200 dpi 300 dpi 400 dpi 600 dpi
1.1.19 Make printing lighter or darker.
Specify the print position of the scanned image.
Specify the format of the original document.
Letter Legal Executive Folio Statement Oficio (Mexico) Universal Format Automatically Fix Combined Formats A4 A5 A6 JIS B5 Custom Scan Size [x] Book Original Business Cards 3 x 5 inch 4 x 6 inch
This will specify the print mode for original documents loaded into automatic document input for double-sided scanning.
From Long Side Short Side
Set the quality of a JPEG image for a photo based on file size.
Best Content Setting 5.10.1990

Printer Menu Information 203
5.10.290 Set the quality of the text based on the file size and image quality.
5.10.290 Set the quality of an image with text or a photo based on its file size and quality.
5.10.290 Set the quality of a photo based on the file size and image quality.
Set that users can choose between TIFF files with one page or more pages. When scanning multiple pages for an FTP task, one TIFF file can be created that contains all the pages of the job or multiple TIFf files may be created with a single file for each page.
Enable Text/Photo mode to create smaller file sizes by using 1 bit images.
1 bit 8 bit
File Name Specify a base file name.
Scanning custom task
Copying a document containing different paper formats.
Specify whether to display an example on the display when scanning tasks are displayed.
Set how much of the background is visible on a copy.
4 to 4
Enable color balance for output.
Cyan - Red Magenta - Green Yellow - Blue
Specify which color is filtered out and adjust in the filter setting for each colour threshold.
No Red Green Blue Default threshold red

Printer Menu Information 204
Specify the contrast of the scanned image.
0-5 Best content setting
Create a mirror image of the original document.
Create a negative image of the original document.
Set how much shadow is visible on a scanned image.
4 to 4
Adjust Lack of Items in ADI
Correct some of the items in the scanned image.
Scan Border to Edge
Set whether to scan the original document from edge to border.
1-5 Set the focus of a scanned image.
Specify poorer or cooler output. Cool output contains more blue than standard output and hot output contains greater red than the default output.
4 to 4
1-999 Specify a standard number of copies for each job.
Set a default paper source for all printing tasks.
Loader [x] Universe charger Manual paper input Manual envelope entry
Keep the pages of a print job in order when printing multiple copies.
(1,1,1) (2,2,2) (1,2,3) (1,2,3)
Determine whether to print on one side or both sides of the page.
Specify whether prints should be enjoyed.

Printer Menu Information 205
Enter for double-sided pages based on the print mode of the page.
Long Side Short side
Set that multiple page images should be printed on one side of a sheet of paper.
From 2 per sheet 3 per sheet 4 per sheet 6 per sheet 9 per sheet 12 per sheet 16 per sheet
Specify the position for multiple page images.
Horizontal Reverse horizon. Vertical Reverse
Set a multi-page document to print.
Print a border around every page.
Set whether empty separation sheets are entered.
Out Between copies Between tasks Between pages
Specify the source of paper for the separation sheets.
Set whether to insert empty pages into a print job.

Printer Menu Information 206
Rotate automatically scanned documents in the right direction.
Remove slices from a scanned image.
To recognize and edit the white text on a black background.
Automatically adjust contrast to improve OCR quality.
Set up the language or languages that OCR can recognize. Choose the following options for each language:
English French German Spanish Italian Portuguese Danish Dutch Norwegian Swedish Finnish Hungarian Polish
Configure the printer language.

Printer Menu Information 207
Specify that printing tasks are removed from the print queue if they require non-available print rop-r options or custom settings.
Print jobs removed from the print queue are stored in a separate printing queue, so that other printing tasks can be printed normally. When the unbreakable data or options are available, the saved tasks will be printed.
Set the logical and physical printable area.
Set the storage location for downloads.
Specify what the printer should do with temporary downloads, such as fonts and macros stored in RAM, if the printer receives a task larger than the available memory.
Print order for everything
Specify the order in which held and confidential tasks are printed when All Prints is selected.
Alphabetical Oldest task as first Newest task to be the first

Printer Menu Information 208
Configure or double-sided printing is used for all print jobs by default.
1 -sided 2 -sided
Set up how double-sided printed pages are bound and printed.
Long Side Short side
1-999 Specify a standard number of copies for each job.
Set whether to insert empty pages into a print job.
Keep the pages of a print job in order when printing multiple copies.
(1,1,1) (2,2,2) (1,2,3) (1,2,3)
Set whether empty separation sheets are entered.
Out Between copies Between tasks Between pages
Specify the source of paper for the separation sheets.
This prints images of multiple page PCB on one side of the paper.
From 2 per sheet 3 per sheet 4 per sheet 6 per sheet 9 per sheet 12 per sheet 16 per sheet

Printer Menu Information 209
Specify the positioning of multiple page images when using Paper Saving.
Horizontal Reverse horizon. Vertical Reverse
Set a multi-page document to print.
This will print a border when using Paper Saving.
Give up or prints will be enjoyed.
Do not perform a test Print a report to check that the nonfinisher is working correctly.
Specify the quality of the scan in dpi (dots per inch).
300 dpi 600 dpi 1200 dpi Image quality 1200 Image quality 2400
This allows more pixels to print in clusters for better brightness, to improve images horizontally or vertically or to enhance fonts.
From Fonts Horizontal Vertical Both directions
1-10 Make printing lighter or darker.

Printer Menu Information 210
Enable a printing mode specially designed for files with precise details, such as architectural drawings, maps, circuit diagrams and flow meters.
Automatically adjust the contrast enhancement applied to the printed images.
This makes printing lighter or darker. You can save toner by making lighter prints.
‐6 to 6
0-5 This adjusts the contrast of the printed objects.
Set whether the printer creates a log file for the received print tasks.
Task administration tools Print log files and delete or export them to a flash drive.
Set how often a log file is created.
Action log file at end of frequency
Set how the printer reacts at the end of the specified frequency.
No Current Log File Emailing and Delete Current Log file E-mailing and deleting Place current log file Post and delete current logfile
Log level almost full
Specify how large the log file can be before running action at Actionlog at almost full.

Printer Menu Information 211
Action log at almost full
Determine and set how the printer reacts when the hard drive of the printer is almost full.
No Current Log File Emails Current Log file email and delete Oldest log file email & remove Place current log file Place current Log file and delete oldest logfile Place and delete deleted existing log file Delete oldest logs file Delete all log files Delete everything except present log file
Set how the printer reacts when maximum disk usage (100 MB) is reached.
No Current Log File Email and Remove Oldest log file email and delete Place and Delete Current Log file Post and remove Oldest Log File Delete Oldestlog file Delete All Log Files Delete All Except Current Logfile
URL for place log files Set where the log files are placed by the printer.
Email address for sending log files Enter the email address to which the task admin log files are sent.
Prefix logfile Specify the desired prefix for the name of the log file.
Watch tasks dilated.
Remove confidential tasks and waiting tasks from the printer's hard drive.
Confidential Waiting Not restored All
Option To · Action log at full · Option Function

Printer Menu Information 212
Format the flash memory.
Remove Downloads on Disk
Remove downloads from the printer's hard drive, including all waiting tasks, buffered tasks and parked tasks.
Remove Now Do not Deviate
Find the cause of a printing problem.
Estimate the coverage rate for toner on a page. The estimate is printed on a separate page at the end of each print job.
Print a page with error information, including XML markup errors.
Customize page contents to the size of the selected paper.

Printer Menu Information 213
Print notes in a PDF file.
Print a page containing the PostScript error.
Disable the SysStart file.
Set the order in which the printer searches fonts.
Set the font set used in the Font Name menu item.
Internal Disk Download Flash Everything
Identify specific font and indicate where it was stored.

Printer Menu Information 214
Display the symbol set for each font name.
Setl. PCL emulation
Change the point size of scalable, typographic fonts.
1.00–1008.00
Setl. PCL emulation
Set font pitch for scalable fixed-tread fonts (monospaced).
0.08–100.00
Setl. PCL emulation
Set the print position of text and images on the page.
Setl. PCL emulation
Specify the number of lines printed on each page.
Setl. PCL emulation
Set the printer to A4 paper format.
198 mm 203 mm

Printer Menus Information 215
Setl. PCL emulation
Specify whether the printer should automatically give a hard return (CR) after command to go to a new line (LF).
Automatic Enter character after new line
Setl. PCL emulation
Specify whether the printer should automatically go to a new line (LF) after a hard return command (CR).
Automatic Enter character after new line
Tray No modify
Configure printer for use with printer software or applications that have defined other loading as a paper source.
From No 0.0.2001 Value tray [x]
Out of No 0.0.2001 Value handm. import
From No 0.0.2001 Value envelope (handm.)
Tray No modify
Display default setting for each drawer, charger or input.
Factory instinct. Again.
U-loader standard inst. = 8 T1 Std. inst. = 1 T2 Std. inst. = 4 T3 Std. inst. = 5 Std. Inst. T4 = 20 T5 Std. inst. = 21 Std. inst. env. = 6 Std. inst. hnd. inv. = 2 Std. inst. env.inv. = 3
Tray No modify
All settings for drawer, charger and input are restored to default.

Printer Menu Information 216
Joanna MT Letter Gothic Lubalin Graph Marigold MonaLisa Recut Monaco New CenturySbk New York Optima Oxford Palatino Stamp Garamond Taffy TimesNewRoman Univers Zapf Chancery NewSansMTCS NewSansMTCT New SansMTJA NewSensMTKO
Set the default font for HTML documents.
Albertus MT Antique Olive Apple Chancery Arial MT Avant Garde Bodoni Bookman Chicago Clarendon Cooper Black Copperplate Coronet Courier Eurostile Garamond Geneva Gill Sans Goudy Helvetica Hoefler Text Intl CG Times Intl Courier Intl Univers
1.1.7255 pt Set the default font size for HTML documents.
1.1.7400% Adjust the default font for HTML documents.
Set the print mode for HTML documents.
8.10.255 mm Set the page margin for HTML documents.

Printer Menu Information 217
Configure or print backgrounds in HTML documents.
Autom. change.
Select optimal values for paper size, scale and print mode.
Turn two-colored black and white images.
Adjust the image size to fit the selected paper format.
Anchor Left Top corner Most Similar Center Anchors Height/width Match Adjust height Adjust width
Set image print position.
Standing facing standing facing facing facing face facing facing
This will print all (help) guides and manuals.
Copy Manual Contains information about making copies and configuring the settings
Email Manual Contains information about sending emails and configuring the settings
Fax Manual Contains information on sending faxes and configuring the settings
Manual FTP Contains information about document scanning and configuring the settings
Provides a template for determining the cause of repeated deviations in print quality and provides an overview of settings that can be used to set print quality
Information Provides help in searching for additional information.
Help with supplies Provides information about ordering supplies

Saving money and helping the environment 218
Lexmark strives for sustainability and is constantly developing printers in such a way that the environmental burden of the printers is reduced. We design with the environment in mind and we devise packaging that requires as little raw materials as possible, and we offer collection and recycling programmes. For more information, see:
You can probably further limit the environmental burden of your printer when choosing your printer's settings and tasks. This chapter summarises the institutions and tasks that can bring a greater environmental benefit.
Research has shown that up to 80% of a printer's carbon footprint is related to paper consumption. You can significantly reduce CO2 emissions with recycled paper and by applying the following print suggestions, such as double-sided printing and multi-page printing on one sheet of paper.
See Using Ecomode on page 218 for more information about how to quickly save paper and energy with one printer setting.
Lexmark is an environmentally conscious company and stimulates the use of business recycled paper that has been specially produced for laser or LED printers. See "Use paper on the loop and other office papers" page 75 for more information about recycled paper that you can use in your printer.
1 Open a web browser and type the printer IP address in the address bar.

Saving money and helping the environment 219
2 Click on Institutions > General Settings > Ecomode > select an setting
Use Ecomode settings from Default values for all settings. The Setting Out supports the performance specifications for your printer.
Limit current Energy consumption, especially when the printer is inactive.
Energy/paper Use all energy and paper saving settings.
3 Click on Send.
Turn on the silent mode to reduce printer sound.
1 Open a web browser and type the printer IP address in the address bar.
2 Click on Institutions > General Settings > Silent Mode > select an setting
From Limit the sound of the printer.
To use Default Settings.
3 Click on Send.
Option Function · Option To

Saving money and helping the environment 220
1 In the start screen, browse for:
> Institutions > General Settings > Time-outs > Sleep Mode
2 In the Sleep Mode field, select the number of minutes that the printer must wait before switching to sleep mode.
3 Apply the changes.
In the dormancy mode, the printer uses almost no power.
1 In the start screen, browse for:
> Institutions > General Settings
2 Select Sleep Mode in dropdown list Press Sleep button or Sleep button and hold down Send On.
With the time-out for slumber mode, you can set after how many minutes the save mode is enabled after a print job has been processed.
1 Open a web browser and type the printer IP address in the address bar.
2 Click on Institutions > General Settings > Time-outs.
3 In the Time-out slumber mode menu, select the number of hours, days, weeks or months that the printer has to wait before switching to saving mode.
4 Click on Send.

Saving money and helping the environment 221
1 Browse the printer's control panel to:
> Institutions > General Settings > Time-outs > Time-out slumber mode
2 Select the time when the printer waits after a print job is processed before setting slumber mode.
On.
Planning power mode allows you to set when the printer switches to a savings position or to the Ready Position.
1 Open a web browser and type the printer IP address in the address bar.
2 Click on Institutions > General Settings > Planning current mode.
3 Select the current mode from the Action menu.
4 Select the time from the Time menu.
5 Select the day or days from the Day menu.
6 Click on Add.
If you want to save energy or cannot read the display correctly, adjust the brightness settings.
1 Open a web browser and type the printer IP address in the address bar.
2 Click on Institutions > General Settings.
3 Touch

Saving money and helping the environment 222
3 In the Brightness box, specify the desired percentage for display.
4 Click on Send.
Lexmark provides collection programme service and progressive, sustainable recycling approaches. For more information, see:
You return Lexmark products for reuse as follows:
1 Go www.lexmark.com/recycle.
2 Find the product type you want to recycle and then select your country or region from the list.
3 Follow the instructions on the screen.
Lexmark is constantly aiming at minimising the packaging material. Using less packaging material guarantees that Lexmark printers are transported as efficiently and environmentally friendly as possible, and fewer packing materials need to be discarded. These efficiencys lead to fewer greenhouse gases and the saving of energy and natural resources.
Lexmark boxes are 100% recyclable in places where corrugated board recycling facilities are available. Such facilities may not be present in your area.
The foam used in Lexmark packaging material is recyclable at places where foam recycling facilities are present. Such facilities may not be present in your area.
If you send a cartridge back to Lexmark, use the carton in which the cartridge is delivered. Lexmark will recycle the box.
With the Lexmark Cartridge Collection Program, you can return used cartridges to Lex Mark for free for reuse or recycling. One hundred percent of empty cartridges returned to Lexmark are reused or processed for recycling. The boxes used to return the cartridges are also recycled.

Saving money and helping the environment 223
Lexmark cartridges can be returned for reuse or recycling as follows:
1 Go www.lexmark.com/recycle.
2 Select the product you want to recycle.

Notification of flight
The printer contains different types of memory that can store device and network settings and user data.
The printer uses standard RAM (Random Access Memory) to buffer user data during simple printing and copying tasks.
The printer may use two types of non-volatile memory: EEPROM and NAND (flash-remember). Both types are used for the storage of operating system, device settings, network information, scanner and bookmarking settings and embedded solutions.
Hard drive In some printers a hard disk is installed. The printer's hard drive is designed for device-specific functions. It can contain buffered user data for complex scan, print, copy and fax tasks as well as form and font data.
In the following cases, you must delete the contents of your printer memory:
In environments where highly sensitive information is used, additional measures may need to be taken to ensure that confidential data on the printer's hard drive are not accessible after the printer or hard disk has been removed from its respective business location.
A power source is needed to store information in the printer's volatile memory (RAM). Disable the printer if you want to delete the buffered data.

1 Turn off the printer.
2 Hold 2 and 6 press while turning on the printer. Do not release the buttons until the screen is displayed with the progress bar.
The printer executes the boot cycle, after which the Configuration menu is displayed. Once the printer is fully enabled, a list of functions must be displayed on the touch screen instead of default icons from the start screen.
3 Touch Clear All Settings On.
During this process, the printer will be restarted several times.
4 Touch Prev > Close Configuration Menu.
The printer will be switched off and turned on again and returns to normal operating mode.
1 Turn off the printer.
2 Hold 2 and 6 press while turning on the printer. Do not release the buttons until the screen is displayed with the progress bar.
The printer executes the boot cycle, after which the Configuration menu is displayed. When the printer is fully enabled, a list of functions must be displayed on the touch screen.
4 Touch Yes to continue erasing the disk.
Secure Printer 225

5 Touch Prev > Close Configuration Menu Tool.
The printer will be switched off and turned on again and returns to normal operating mode.
Enable hard drive encryption to prevent you from losing sensitive data if your printer or the hard drive is stolen.
1 Open a web browser and type the printer IP address in the address bar.
2 Click on Institutions > Security > Disc Encoding.
3 Select Enable in the Disk Encoding menu.
4 Click on Send.
1 Turn off the printer.
2 Hold 2 and 6 press while turning on the printer. Do not release the buttons until the screen is displayed with the progress bar.
The printer executes the boot cycle, after which the Configuration menu is displayed. When the printer is fully heated, a list of functions appears on the printer display.
3 Touch Disc Encoding > Enable On.
4 Touch Yes to continue erasing the disk.
Secure printer 226

5 Touch Prev > Quit Configuration Menu On.
The printer will be switched off and turned on again and returns to normal operating mode.
In environments where highly sensitive information is used, additional measures may need to be taken to ensure that confidential data on the printer's hard drive are not accessible to unauthorized persons. For more information, please visit the Lexmark security web page or consult the administrator's manual Embedded Web Server, security on http://support.lexmark.com
Secure Printer 227

NOTE: DANGER OF ELECTRIC SHOCKS: To avoid the risk of electric shocks, pull the power cord plug out and unplug all cables connected to the printer before cleaning the outside of the printer.
1 Turn off the printer and pull the plug on the power cord of the printer from the socket.
2 Remove all the paper from the standard tray and multifunctional input.
3 Clean the printer with a soft brush or vacuum cleaner to remove dust, ink ribbon and pieces of paper in and around the printer.
4 Wipe the outside of the printer with a damp, soft, lint-free cloth.
5 Connect the power cord plug to the socket and turn on the printer.
PLEASE NOTE: RISK OF INJURY: To avoid the risk of electric shocks or fire, you need to connect the power cord directly to a grounded outlet close to the product and which is easily accessible.
Maintaining printer 228

Clean the glass plate if there are problems with printing quality, for example when stripes appear on copied or scanned images.
1 Make a soft, lint-free cloth or paper cloth slightly moist with water.
2 Open the valve of the scanner.

3 Clean the indicated areas and let them dry.

1 White bottom of the scanner valve
4 White bottom of ADI valve
4 Close the scanner valve.
Maintaining printer 229 · 2 Glass plate · 3 ADF glass plate

Check the status of parts and supplies on the printer's control panel
Hit in the home screen Status/Supplies > Show supplies On.
1 Open a web browser and type the printer IP address in the address bar.
2 Click on Device status > More details.
The estimated number of pages remaining is based on the printer's recent print history. The accuracy of the data can vary considerably and depends on many factors, such as actual document content, print quality settings and other printer settings.
The accuracy of the estimated number of pages remaining may decrease when actual printing consumption differs from past print consumption. Please take this variable accuracy level into account before purchasing or replacing supplies based on the estimate. Until adequate print history is obtained, the first estimates assume that supplies are consumed based on International Organization for Standardisation* test methods and page content.
* Displayed average cartridge efficiency (black) according to ISO/IEC 19752.
Printer maintenance 230

In the U.S. Please call to order supplies +1800-539-6275 for information about authorised dealers of Lexmark supplies in your area. In other countries or regions you will go to www.lexmark.com or contact the store where you bought the printer.
Your Lexmark printer works best with original Lex Mark supplies and parts. Using supplies or components from manufacturers other than Lexmark may have a negative impact on the performance, reliability or lifetime of the printer and image processing parts of the device. The use of supplies or parts from other manufacturers may affect your warranty. Damage caused by the use of supplies or parts from other manufacturers is not covered by the warranty. All life indicators are designed to function with the supplies and parts Lexmark. If you use supplies or parts from other manufacturers, this may lead to unpredictable results. The use of image processing components longer than the intended life span can damage your Lexmark printer or its parts.
Item United States and Canada
European Economic Area (EEA+)
Rest of Europe, Middle East and Africa (RoEMEA)
Distribution in Latin America (LAD)
Rest of Asia Pacific (RoAP)
Australia and New Zealand (ANZ)
Toner cartridge 60F1000 60F2000 60F5000 60F4000 60F3000 60F 3000
High-efficiency toner cartridge
Extra high-efficiency toner cartridge
Go www.lexmark.com/regions for more information on countries in the individual regions.
Toner cartridge with extra high efficiency 60F0XA0
Go www.lexmark.com/regions for more information on countries in the individual regions.
Maintaining printer 231 · Item Whole World


Go www.lexmark.com/regions for more information on countries in the individual regions.

Go www.lexmark.com/regions for more information on countries in the individual regions.
Extremely low print coverage over a longer period can cause parts of the image processing unit to break before the toner is run out in the tone cartridge.
Please refer to the instructions at the supply for more information about replacing the image processing unit.
Article name Lexmark return programme for toner cartridges Normal
Ordering a maintenance kit

100-V maintenance kit* 40X9147
110-V maintenance kit 40X9137
220-V maintenance kit 40X9138
* This is only available in Japan.
Order an ADI separator when the ADI does not take paper or takes multiple sheets at once.
Refer to the instructions in section for further information on replacing ADI separator.
Store supplies in a cool, clean room. Supplies should always be stored upright in the original package until they are used.
Do not expose the printer's uploads to:

1 Press the button on the right side of the printer and open the front valve.


2 Pull the toner cartridge out of the handle.

3 Unpack the toner cartridge and remove all packaging material.
4 Shake the new cartridge to distribute the toner evenly.

Maintaining printer 234

5 Install the toner cartridge in the printer by aligning arrows on the side of the cartridge with arrows placed on the rails inside the printer.


6 Close the front valve.
1 Press the button on the right side of the printer and open the front valve.
Maintaining printer 235

2 Pull the toner cartridge out of the handle.
3 Lift the green handle and pull out the image processing unit.

4 Unpack the new image processing unit and shake it.

5 Remove all packaging material from the image processing unit.
Maintaining printer 236


6 Install the image processing unit in the printer by aligning the arrows on the side of the image handling unit with the arrow on the rails inside the printer.

7 Install the toner cartridge in the printer by aligning arrows on the side of the cartridge with arrows placed on the rails inside the printer.

8 Close the front valve.
Maintaining printer 237

1 Open the valve of the stapler.

2 Pull the non-cassette out of the finisher.


3 Grab both sides of the empty non-cassette, pull out the cassette and lift the cassette from the holder.


Maintaining printer 238

4 Remove the spare cassette from the holder.

5 Place the spare cassette in the cassette holder.


6 Push the non-cassette into the finisher until it clicks.


7 Purchase a new spare cassette for future use.
8 Close the valve of the stapler.


Printer maintenance 239

PLEASE NOTE: RISK OF INJURY: The printer weighs more than 18 kg (40 lb) and must be lifted by two or more trained staff.
PLEASE NOTE: RISK OF INJURY: Use only the power cord supplied with this product or a replacement component approved by the manufacturer to prevent fire or electric shocks.
If you want to transport the printer, use the original packaging or call the store where you bought the printer for the required packing materials.
Maintaining printer 240

Display advanced network information and admin information
This chapter describes general support management tasks carried out with the Embedded Web Server. For information on advanced system support tasks in Lexmark's Support Website, please see the Network Manual on CD Software and Documentation or Admin Guide for Embedded Web Server. http://support.lexmark.com.
1 Open a web browser and type the printer IP address in the address bar.
2 Check that the virtual display is displayed in the upper left corner of the screen.
The virtual display works just like a real display on the printer's control panel.
You can set that the printer sends an email message when supplies run out or when the paper needs to be replaced or added, or when paper has crashed.
1 Open a web browser and type the printer IP address in the address bar.
2 Click on Institutions.
3 In the Other Settings menu click on Settings for mail notifications.
4 Select where you want notifications from and then enter the email addresses.
5 Click on Send.
Manage Printer 241

You can view a number of reports from the Embedded Web Server. These reports are useful for determining the status of the printer, network and supplies.
1 Open a web browser and type the printer IP address in the address bar.
2 Click on Reports and then click on the type of report you want to view.
You can specify how to receive notifications when supplies are almost empty, empty or very empty, or when the end of supply life is reached. To do this, set the selectable notifications.
1 Open a web browser and type the printer IP address in the address bar.
2 Click on Institutions > Print Settings > Supplies notifications.
3 In the dropdown menu for each supply, select one of the following notification options:
The normal printer behaviour for all supplies takes place.
Email only The printer generates an email when the supply status is reached. The status of the supply is displayed on the menu page and status page.
Manage printer 242 · Messages Description

Stop possible resumption1 When supply status is reached, the printer stops processing tasks and the user can press a button to continue printing.
Stop without a possible resumption1,2 When supply status is reached, the printer stops processing
tasks. The supply must be replaced before the user can continue printing.
1 The printer generates an email about the supply status when notifications of supplies are enabled.
2 When some supplies are empty, the printer stops to prevent damage.
4 Click on Send.
If you want to keep a list of the current menu settings for reference purposes, print out a page with menu configuration before restoring factory settings. For more information, see 'Print page with menu settings' on page 55.
If you want a more extensive method of restoring the default factory settings, run the Clear All Settings option. See 'Unvolatile Memory Erasing' on page 225 for more information.
Warning: Possible damage: If default settings are restored, most printer settings will be returned to the original values as set in the factory. Exceptions are: the display language, custom formats and messages and settings for the Network/Port menus. All downloads in the RAM will be deleted. Downloads stored in flash memory or on the hard drive of the printer are not deleted.
In the start screen, browse for:
> Institutions > General Settings > Factory Settings > Recover Now >
Manage printer 243 · Messages Description

Preventing paper failures
Paper is correctly placed Paper is not correctly placed

Resolve paper failures 244




Resolving Paper Failures 245

8 Finisher tailgate
1 Remove all original documents from the ADF drawer.
2 Open the valve of the ADF.

3 Remove the stuck paper.
4 Close the ADF valve.
Remove the stuck paper.


1 Open the tailgate.
NOTE: HOT SURFACE: The inside of the printer can be hot. To avoid injury, you should cool a hot surface before touching it.

2 Remove the stuck paper.
3 Close the tailgate.
Resolving paper failures 247

NOTE: HOT SURFACE: The inside of the printer can be hot. To avoid injury, you should cool a hot surface before touching it.
1 Open the front door.
2 Remove the toner cartridge.
Resolve Paper Failures 248

3 Remove the image processing unit.
4 Remove the stuck paper.


5 Place the image processing unit.
Resolving paper failures 249

6 Place the toner cartridge.
7 Close the front valve.
1 Remove the drawer.

Paper failures remedy 250

2 Remove the stuck paper.


3 Place the drawer.
1 Remove the paper from multifunctional input.
2 Remove the stuck paper.

3 Bend the paper, fan it out and align the edges before inserting it into the printer.

Resolve paper failures 251

4 Reload paper and then adjust the paper guide.

1 Remove the drawer.
2 Remove the stuck paper.

Resolve Paper Failures 252

3 Put the drawer back.
1 Remove the paper from the standard tray.

2 Remove the stuck paper.

Resolve paper failures 253

1 Open the finisher's tailgate.

2 Remove the stuck paper.
3 Open the narrow valve of the finisher and remove any pieces of paper.


4 Close the narrow valve and tailgate.
Resolve paper failures 254

1 Open the door of the stapler.
2 Remove the non-cassette holder.
3 Lift the non-cap and remove the loose staples.

Resolve paper failures 255

4 Close the non-protector.
5 Place the non-cassette holder.


6 Close the door of the stapler.
Paper failures remedy 256
![Page 257 of the Lexmark MX617 user manual — Change [paper source] to [adapted series] places [print mode]](/cdn/reader/61/6184d65d718c5884ad89ad8cf74e45a0886e1933c90ecb13e88bf34df57e7d35/images/page-257.webp?w=400)
Explanation about printer messages
You may need to order a new toner cartridge. Touch if necessary Continue on the printer's control panel to continue printing.
Use only a supported toner cartridge and image processing unit.
Touch if necessary Continue on the printer's control panel to erase the message and continue printing.
You may need to replace marked toner cartridge very soon. Please refer to the . . replace Supplies section in the User's Manual for more information.
Touch if necessary Continue on the printer's control panel to continue printing.
Try one or more of the solutions:
Try one or more of the solutions:
Troubleshooting 257
![Page 258 of the Lexmark MX617 user manual — Check connection tray [x]](/cdn/reader/61/6184d65d718c5884ad89ad8cf74e45a0886e1933c90ecb13e88bf34df57e7d35/images/page-258.webp?w=400)
Try one or more of the solutions:
Try one or more of the solutions:
Try one or more of the following solutions:
If the error occurs a second time:
1 Turn off the printer. 2 Pull the plug off the power cord from the socket. 3 Remove the marked drawer. 4 Put the drawer back. 5 Plug the power cord into a well grounded outlet. 6 Turn the printer back on.
If the error recurs:
1 Turn off the printer. 2 Pull the plug off the power cord from the socket. 3 Remove the drawer. 4 Contact customer support. • Touch Continue on the printer's control panel to delete the message and resume the task.
Solving problems 258
![Page 259 of the Lexmark MX617 user manual — Configuration changed, some tasks on hold have not been recovered [57]](/cdn/reader/61/6184d65d718c5884ad89ad8cf74e45a0886e1933c90ecb13e88bf34df57e7d35/images/page-259.webp?w=400)
Close the back of the printer.
Close the finisher's tailgate.
Close the front valve of the printer.
Close the flatbed valve and place originals when restarting task [2yy.xx]
Try one or more of the following solutions:
Try one or more of the following solutions:
Queue tasks are invalid due to the following possible changes on printer:
Touch Continue on the printer's control panel to erase the message.
Solving problems 259

Try one or more of the following solutions:
Try one or more of the following solutions:
Touch Formatting Disc on the printer's control panel to reformat the printer hard drive and delete the message.
Almost full disk. Clear disk space.
Try one or more of the following solutions:
Error reading from USB drive. Remove USB.
An unsupported USB device has been installed. Remove the USB device and then insert a supported device.
Error reading USB hub. Remove hub.
An unsupported USB hub has been installed. Remove the USB hub and install a supported device.
Troubleshooting 260
![Page 261 of the Lexmark MX617 user manual — Image processing unit almost empty [84.xy]](/cdn/reader/61/6184d65d718c5884ad89ad8cf74e45a0886e1933c90ecb13e88bf34df57e7d35/images/page-261.webp?w=400)
1 Touch Continue on the control panel to delete the message and cancel the fax job.
3 Send the fax job.
Fax partition is not working. Consult the system administrator.
Try one or more of the following solutions:
Fax server 'According to format' is not set. Consult the system administrator.
Try one or more of the following solutions:
Fax station name not set. Consult the system administrator.
Perform any of the following actions:
Fax station number not set. Consult the system administrator.
Try one or more of the following solutions:
You may need to order a new image processing unit. Select if necessary Continue on the printer's control panel to close the message and continue printing.
Troubleshooting 261
![Page 262 of the Lexmark MX617 user manual — Insufficient memory for sorting [35]](/cdn/reader/61/6184d65d718c5884ad89ad8cf74e45a0886e1933c90ecb13e88bf34df57e7d35/images/page-262.webp?w=400)
Touch if necessary Continue on the printer's control panel to continue printing.
You may need to replace the image processing unit very soon. Please refer to the . . replace Supplies section in the User's Manual for more information.
Touch if necessary Continue on the printer's control panel to continue printing.
Try one or more of the following solutions:
Try one or more of the following solutions:
Place the indicated drawer in the printer.
Try one or more of the following solutions:
Troubleshooting 262
![Page 263 of the Lexmark MX617 user manual — Place [adapted string] [paperprint position] in [paper source]](/cdn/reader/61/6184d65d718c5884ad89ad8cf74e45a0886e1933c90ecb13e88bf34df57e7d35/images/page-263.webp?w=400)
Touch Continue on the printer's control panel to erase the message.
Try one or more of the following solutions:
Install additional printer memory or touch Continue to disable source storage, close the message and continue printing.
Try one or more of the following solutions:
Try one or more of the following solutions:
Troubleshooting 263
![Page 264 of the Lexmark MX617 user manual — Insert [adapted string] [paper print mode] into multifunction input](/cdn/reader/61/6184d65d718c5884ad89ad8cf74e45a0886e1933c90ecb13e88bf34df57e7d35/images/page-264.webp?w=400)
Try one or more of the following solutions:
Try one or more of the following solutions:
Note: If the printer finds a drawer or input with paper of appropriate size and type, then it will be used from that tray or entry. If the printer cannot find a drawer or input with paper of the right size and type, then the task is printed on the paper from the standard paper source. • Cancel the current task.
Try one or more of the solutions:
Try one or more of the solutions:
Solving problems 264
![Page 265 of the Lexmark MX617 user manual — Maintenance kit almost empty. Estimated number of pages remaining is [x] [80.xy]](/cdn/reader/61/6184d65d718c5884ad89ad8cf74e45a0886e1933c90ecb13e88bf34df57e7d35/images/page-265.webp?w=400)
Try one or more of the solutions:
Try one or more of the solutions:
You may need to order a maintenance kit. For more information, visit Lexmark's support website on http://support.lexmark.com or contact your service representative and pass on the message.
Touch if necessary Continue to close the message and continue printing.
For more information, visit Lexmark's support website on http://support.lexmark.com or contact your service representative and pass on the message.
Touch if necessary Continue to close the message and continue printing.
You may need to replace the indicated maintenance kit very soon. For more information, visit Lexmark's support website on http://support.lexmark.com or contact your service representative and pass on the message.
Touch if necessary Continue to close the message and continue printing.
Solving problems 265
![Page 266 of the Lexmark MX617 user manual — None [supplytype] of Lexmark, see User's Manual [33.xy]](/cdn/reader/61/6184d65d718c5884ad89ad8cf74e45a0886e1933c90ecb13e88bf34df57e7d35/images/page-266.webp?w=400)
Try one or more of the following solutions:
Do the following on the control panel:
Try one or more of the solutions:
No analogue phone line connected to the modem, fax is disabled.
Connect the printer to an analogue phone line.
The printer has detected that a supply or part of a brand other than Lexmark is installed in the printer.
Your Lexmark printer works best with original Lex Mark supplies and parts. When you use supplies or parts of other manufacturers, this may have a negative impact on the performance, reliability or lifetime of the printer and image processing components of the device. See 'Use Official Lexmark parts and supplies' on page 231 for more information.
All life indicators are designed to function with the supplies and parts Lexmark. If you use supplies or parts from other manufacturers, this may lead to unpredictable results. The use of image processing components longer than the intended lifetime can damage your Lexmark printer or its parts.
If you want to accept these risks and continue using non-original supplies or
parts in your printer, then keep and the button # Pressed on the control panel for 15 seconds.
Troubleshooting 266
![Page 267 of the Lexmark MX617 user manual — Remove defective disk [61]](/cdn/reader/61/6184d65d718c5884ad89ad8cf74e45a0886e1933c90ecb13e88bf34df57e7d35/images/page-267.webp?w=400)
If you do not want to accept these risks, remove the supply or component of other manufacturers from your printer and replace it with an original supply or part of Lexmark.
Try one or more of the following solutions:
Try one or more of the following solutions:
Try one or more of the following solutions:
Network/Ports > parallel [x] > parallel buffer > Automatic
The printer had to be restarted. The last task may not be completed.
Hit the printer's control panel Continue to delete the message and continue printing.
For more information, please visit http://support.lexmark.com or contact customer support.
Remove and replace the failed hard drive from printer.
Troubleshooting 267
![Page 268 of the Lexmark MX617 user manual — Replace image processing unit. Estimated number of remaining pages is 0 [84.xy]](/cdn/reader/61/6184d65d718c5884ad89ad8cf74e45a0886e1933c90ecb13e88bf34df57e7d35/images/page-268.webp?w=400)
Remove the paper stack from the standard tray.
Replace all originals when restarting the task.
Try one or more of the following solutions:
Replace the toner cartridge to clear the message and continue printing. For more information, please refer to the instructions provided with the supply or replace the . .
Replace the defective image processing unit to delete the message. Please refer to the instructions in the supply for more information.
Replace the image processing unit to delete the message and continue printing. For more information, please refer to the instructions provided with the supply or replace the . .
Troubleshooting 268
![Page 269 of the Lexmark MX617 user manual — Replace unsupported cartridge [32.xy]](/cdn/reader/61/6184d65d718c5884ad89ad8cf74e45a0886e1933c90ecb13e88bf34df57e7d35/images/page-269.webp?w=400)
Place frozen origin. back to opn. start task.
Try one or more of the following solutions:
The printer requires maintenance. For more information, please visit http://support.lexmark.com. Or contact your service representative and report the problem.
Install the missing image processing unit. Please refer to the instructions in the supply for more information.
Try one or more of the solutions:
For more information about installing the toner cartridge, see the 'Replace supplies' section. • If the toner cartridge is installed, remove it and install the non-reactive toner cartridges again.
Replace the toner cartridge and install a supported copy to delete the message and continue printing. Please refer to the instructions in the supply for more information.
This error can also be caused by installing an official Lexmark cartridge, such as a high-efficiency cartridge that is not intended for this product.
The following error codes indicate that a non-original Lexmark toner cartridge is installed:
32.13 32.16 32.19 32.22
Solving problems 269

32.25 32.28 32.31 32.34 32.37
See 'Use Official Lexmark parts and supplies' on page 231 for more information.
Replace the image processing unit and install a supported copy to delete the message and continue printing. Please refer to the instructions in the supply for more information.
This error can also be caused by the installation of an original Lexmark image processing unit, such as a MICR unit, which is not intended for this product.
The following error codes indicate that a non-original Lexmark image processing unit is installed:
32.14 32.17 32.20 32.23 32.26 32.29 32.32 32.35 32.38
See 'Use Official Lexmark parts and supplies' on page 231 for more information.
Try one or more of the following solutions:
Close the ADI valve.
Troubleshooting 270

Print without the scanner or contact the system administrator.
Scanner down. If the problem continues to occur, contact the system administrator. [840.02]
Try one or more of the following solutions:
Remove the stuck paper from the scanner.
Remove the stuck paper from the scanner.
Try one or more of the following solutions:
SMTP server is not set. Consult the system administrator.
Touch Continue on the printer's control panel to erase the message.
Touch Continue on the printer's control panel to clear the specified task.
Troubleshooting 271
![Page 272 of the Lexmark MX617 user manual — Too many loads connected [58]](/cdn/reader/61/6184d65d718c5884ad89ad8cf74e45a0886e1933c90ecb13e88bf34df57e7d35/images/page-272.webp?w=400)
Try one or more of the solutions:
Try one or more of the following solutions:
Network/Ports > USB Buffer > Automatic
Perform any of the following actions:
The device is in safe mode. Some print options may be disabled or deliver unexpected results.
Touch Continue on to delete the message.
1 Turn off the printer.
2 Pull the plug off the power cord from the socket.
3 Remove the extra flash memory.
4 Plug the power cord into a well grounded outlet.
5 Turn the printer back on.
1 Turn off the printer.
2 Pull the plug off the power cord from the socket.
3 Remove the extra drawers.
Troubleshooting 272

4 Plug the power cord into a well grounded outlet.
5 Turn the printer back on.
Try one or more of the following solutions:
Remove the unsupported hard drive from the printer and insert a copy that is supported.
1 Turn off the printer.
2 Pull the plug off the power cord from the socket.
3 Remove the unsupported optional card from the printer controller card and replace it with a supported card.
4 Plug the power cord into a well grounded outlet.
5 Turn the printer back on.
Touch Continue on the printer's control panel to erase the message.
Web link server not set. Consult the system administrator.
Touch Continue on the printer's control panel to erase the message.
Troubleshooting 273

Go to step 2. Turn on the printer.
Check that the printer is on.
- Is the printer enabled?
Press the sleep button to disable sleep or slumber mode.
Go to step 3.
Check that the printer is in sleep or slumber mode.
Is the printer in sleep or slumber mode?
Go to step 4. Connect one end of the power cord to the printer and another end to a grounded outlet.
Check that one end of the power cord is connected to the printer and another end on a grounded socket.
Is the power cord connected to the printer and a grounded outlet?
Disconnect the other electrical equipment and switch on the printer. If the printer does not work, reconnect the other electrical equipment.
Go to step 5.
Check the other electrical equipment connected to the power outlet.
Does the other electrical equipment work?
Go to step 6. Make sure the following items match:
Check that the cables with which the printer is connected are in correct ports.
Are the cables in the correct ports?
Step 6. Make sure the power outlet is not switched off using a switch or circuit breaker.
Turn on the switch or reset the circuit breaker.
Go to step 7.
Is the power outlet switched off using a switch or circuit breaker?

Connect the mains cord of the printer directly to a grounded outlet.
Go to step 8.
Check if the printer is connected to an overvoltage device, a UPS or an extension cord.
Is the printer connected to an overvoltage protection, a UPS or an extension cord?
Step 8 Check that one end of the printer cable is connected to a port of the printers and another end on the computer, print server, option or other network device.
Go to step 9. Connect the printer cable firmly to the printer and on computer, print server, option or other networkap- ready.
Is the printer cable securely connected to the printer and computer, print server, option or other network device?
Go to step 10. Turn off the printer, remove all packaging material, reinstall hardware options and turn on the printer again.
Make sure all hardware options are properly installed and remove packaging material.
Are all hardware options well installed and has all packaging material been removed?
Go to step 11. Use the correct settings in the printer driver.
Check that you have selected the correct port settings in the printer driver.
Are the port settings correct?
Step 11 Check the installed printer driver.
Go to step 12. Install the correct printer steering program.
Is the correct printer driver installed?
Step 12 Disable the printer and turn on the printer after about 10 seconds.
The problem is solved.
Contact Customer supportif you want to scan any more pages.

The problem is solved.
Go to step 2.
Press the sleep button on the printer's control panel.
Appears Done On the printer display?
The problem is solved.
Turn off the printer and contact Customer supportif you want to scan any more pages.
Disable the printer and turn on the printer after about ten seconds.
Appear Please wait and Done On the printer display?
Step 1 Disable the printer and turn on the printer after about ten seconds.
The problem is solved.
Go to step 2.
Is the internal option working correctly?
Step 2 Check for internal option is correctly installed in the control-ler card.
Go to step 3. Connect the internal option to the controller card.
a Turn off the printer with the on-off switch and pull the plug
Out of the socket. b Check if the internal option is installed in the correct one
connector on the controller card. c Connect the power cord to the printer, plug it into a grounded
power supply and switch on the current.
Is the internal option correctly installed in the controller card?
Go to step 4. Reinstall the internal option.
Print a page with menu settings to check if the internal option is listed in the list of installed functions.
Is the internal option mentioned on the menu settings page?

The problem is solved.
Contact Customer support.
a Check if the internal option is selected.
You may need to add the option manually in the printer's tool to make it available for printing tasks. See 'Add the printer driver options available' on page 50 for more information. b Send the print job again.
Is the internal option working correctly?
The problem is solved.
Go to step 2.
a Pull the drawer out and perform one of the following steps:
The problem is solved.
Go to step 3.
a Disable printer and turn off printer after about ten
seconds back in. b Send the print job again.
Step 3. Check that the drawer is installed and recognized by the printer.
Go to step 4. Put the paper tray back. For more information, please refer to the included drawer installation documentation.
Print a page with menu settings and check that the tray is listed in the list of installed functions.
Is the drawer on the menu settings page?

The problem is solved.
Contact Customer supportif you want to scan any more pages.
Check that the drawer is available in the printer driver.
Is the drawer available in the printer driver?
Check that the memory card is installed.
The problem is solved.
Contact Customer support.
a Install the memory card. See Installing a Memory Card
page 32 for more information.
card is listed in the list of installed options.
Is the map listed in the list of installed options?
Step 1 Check that the Internal Solutions Port (ISP) is installed.
Go to step 2. Check if you have a supported ISP.
a Install the ISP. See 'Install Internal Solutions Port' on
page 35 for more information. b Print a page with menu settings and check if the ISP
is listed in the installed functions list.
Is the ISP in the list of installed functions?
Step 2 Check the cable and ISP connection.
The problem is solved.
Contact Customer supportif you want to scan any more pages.
a Use the right cable and make sure it is securely connected to
locks on the ISP. b Check that the interface cable of the ISP solution is secure
connected to the controller card connection.
Is the Internal Solutions Port working correctly?

Go to step 2. Check if you have a supported USB or parallel interface card.
Check that the USB or parallel interface card is installed.
a Install the USB or parallel interface card. See 'Internal
Install Solutions Port' on page 35 for more information. b Print a page with menu settings and check if the USB
or parallel interface card is listed in the list of installed functions.
Is the USB or parallel interface card listed in the installed functions list?
The problem is solved.
Contact Customer supportif you want to scan any more pages.
Check the cable and connection of the USB or parallel interface card.
Use the right cable and make sure it is securely connected to the USB or parallel interface card.
Is the USB or parallel interface card working properly?
Go to step 2. The problem is solved.
a Pull the drawer out and perform one of the following steps:
If repair is enabled after failure, the print jobs will be automatically reprinted.
Are paper failures still regular?

Go to step 3. The problem is solved.
a Replace the paper. Use paper from a new suit.
Are paper failures still regular?
Contact Customer supportif you want to scan any more pages.
The problem is solved.
a Read the tips on avoiding malfunctions. See 'Prevention of
paper failures' on page 244 for more information. b Follow the recommendations and send the print job
Again.
Are paper failures still regular?
Check the entire paper track for stuck paper.
Contact Customer supportif you want to scan any more pages.
The problem is solved.
a Remove stuck paper. b Touch Continue on the printer control panel to
delete the message.
Isn't the message about the paper that got stuck disappearing?
Turn on recovery after failure.
The problem is solved.
Contact Customer supportif you want to scan any more pages.
a In the start screen, browse for:
> Institutions > General Settings > Pressure recovery b In the Recovery menu, after malfunction, touch the arrows to To or
Automatic to be paed. c Touch Submit On.
Are there pages printed again after the malfunction?

The problem is solved.
Go to step 2.
a Check the control panel or documents in the list
display with waiting tasks.
Are the documents printed?
The problem is solved.
Go to step 3.
The print job may contain a formatting error or invalid data.
Are the documents printed?
The problem is solved.
Go to step 4.
If you print from the internet, it may be that the printer reads multiple job names as duplicates.
a Open the Print Preferences dialog. b Select Keep duplicate documents in the Print-
and waiting duties. c Enter a PIN. d Send the print job again.
a Save each task separately and give it a unique name. b Send the task separately.
Are the documents printed?
The problem is solved.
Go to step 5.
a Remove some tasks in queue to free printer memory
The Commission has already taken a decision on this matter. b Send the print job again.
Are the documents printed?

The problem is solved.
Contact Customer support.
a Add printer memory. b Send the print job again.
Are the documents printed?
Step 1 Check that the flash drive is in front USB port.
Go to step 2. Place the flash drive in the front USB port.
Is the flash drive in front USB port?
Step 2 Check that the indicator light on the printer's control panel is green.
Wait until the printer is finished, then view the waiting tasks list and print out the documents.
Go to step 3.
Is the green indicator light flashing?
Go to step 4. The problem is solved.
a Check if an error message is displayed on the display-
• b Clear the message.
Is the error message still displayed?
Go to step 5. The problem is solved.
Check that the flash drive is supported.
See "Supported flash drives and file types" on page 84 for more information about tested and approved USB flash drive.
Is the error message still displayed?
Contact Customer supportif you want to scan any more pages.
The problem is solved.
Check that the USB port is disabled by the system controller.
Is the error message still displayed?

Deactivate Hex Trace mode.
Go to step 2.
Make sure the printer is not in Hex Trace mode.
Is the printer in Hex Trace mode?
Contact Customer supportif you want to scan any more pages.
The problem is solved.
a Select the option on the printer's control panel
Standard network or Network [x] And turn on SmartSwitch. b Send the print job again.
Are there wrong characters printed?
The problem is solved.
Go to step 2.
a Check if you print on paper supported by the
Tray. b Send the print job again.
Is the task printed from the right drawer or on the correct paper?
The problem is solved.
Go to step 3.
a Set the printer's control panel in the Paper menu
paper size and type settings in such a way that they correspond to the paper placed in the drawer. b Send the print job again.
Is the task printed from the right drawer or on the correct paper?
The problem is solved.
Go to step 4.
a Depending on your operating system, open the dialog
Print or Print Preferences and specify the type of paper. b Send the print job again.
Is the task printed from the right drawer or on the correct paper?
The problem is solved.
Contact Customer supportif you want to scan any more pages.
a Check that the drawers are not connected. b Send the print job again.
Is the task printed from the right drawer or on the correct paper?

The problem is solved.
Go to step 2.
a Set the printer's control panel in the Finish menu
the Sort option by (1,2,3) (1,2,3). b Send the print job again.
Is the task correctly printed and sorted?
The problem is solved.
Go to step 3.
a In the printer software, set the Sort option to (1,2,3) (1,2,3).
Is the task correctly printed and sorted?
Step 3. Make the task less complex by reducing the number of different letter types and font sizes, limiting the number and use easier images or having fewer pages printed at once.
The problem is solved.
Contact Customer support.
Is the task correctly printed and sorted?
The problem is solved.
Go to step 2.
a Check that the print options for PDF output are such
set to include all fonts.
Please refer to the documentation provided by Adobe Acrobat. b Generate a new PDF file and send the print job
Again.
Are the files printed?
The problem is solved.
Contact Customer supportif you want to scan any more pages.
a Open the document you want to print in Adobe Acrobat. b Click on Stock > Print > Advanced > Print As
image > OK > OK.
Are the files printed?

The problem is solved.
Go to step 2.
a Make sure the size of the paper that is placed in the drawer,
corresponds to the type of heating station.
- Is the print speed increasing?
The problem is solved.
Contact Customer supportif you want to scan any more pages.
a Replace the heating station. Please refer to the instructions at the time of your visit.
for more information on the installation of the hot-water station. b Send the print job again.
- Is the print speed increasing?
The problem is solved.
Go to step 2.
a Open the print dialog from the document that
you want to print and check that you have selected the correct printer.
Are the tasks printed?
The problem is solved.
Go to step 3.
a Check that the printer plug is in the socket properly,
whether the printer is enabled, or Done is displayed on the printer display. b Send the print job again.
Are the tasks printed?

The problem is solved.
Go to step 4.
If an error message appears on the printer display, you will delete the message.
Are the tasks printed?
The problem is solved.
Go to step 5.
a Check that the ports (USB, serial or Ethernet) are working and whether
the cables are firmly connected to the computer and printer.
Are the tasks printed?
The problem is solved.
Go to step 6.
a Disable printer and turn off printer after about ten
seconds back in. b Send the print job again.
Are the tasks printed?
The problem is solved.
Contact Customer support.
a Remove the printer software and reinstall it. See 'The
install printer software on page 50 for more information.
Are the tasks printed?
The problem is solved.
Go to step 2.
Change the settings for the printer's energy use.
a Browse the printer's control panel to:
Institutions > General Settings b Select Eco Mode or Silent Mode and select Off.
Is the document printed?

The problem is solved.
Go to step 3.
Use fewer fonts and smaller font sizes, limit the number of images and use simple images and reduce the number to print pages in the task and send the task again.
Is the document printed?
The problem is solved.
Go to step 4.
a Remove tasks held in printer memory. b Send the print job again.
Is the document printed?
The problem is solved.
Go to step 5.
a Disable the Page Protection feature.
Browse the printer's control panel to: Institutions > General Settings > Reset print > Page Security >From b Send the print job again.
Is the document printed?
The problem is solved.
Go to step 6.
a Check the cable connections to printer and print server
well confirmed. For more information, please refer to the included installation document of the printer. b Send the print job again.
Is the document printed?
Step 6. Install additional printer memory and send the print job again.
The problem is solved.
Contact Customer supportif you want to scan any more pages.
Is the document printed?

The problem is solved.
Go to step 2.
a Open the loading and check that all paper is the same format
and of the same type.
Are the drawers properly coupled?
The problem is solved.
Contact Customer supportif you want to scan any more pages.
a Enter the type and size of the paper in the drawers you want
mount it in the Paper menu on the printer's control panel.
Are the drawers properly coupled?
Increase the print timeout.
The problem is solved.
Check if there are manual page endings in the original file.
a In the start screen, browse for:
> Institutions > General Settings > Time-outs b Enlarge the Print Time-Out setting and hit Send On.
c Send the print job again.
Is the file printed correctly?
Signs have fragrant or uneven edges.

Go to step 2. The problem is solved.
a The list of font examples is finished to check that the
used fonts are supported by the printer.
1 Browse the printer's control panel to:
> Reports > Print fonts 2 Touch PCL fonts or PostScript Fonts On. b Use a font supported by the printer or
install the font you want to use. Please contact your system administrator for more information. c Send the print job again.
Are prints still marked with serrated or uneven edges?
Contact Customer supportif you want to scan any more pages.
The problem is solved.
a Use a font supported by the printer or
install the font you want to use on your computer. Please contact your system administrator for more information. b Send the print job again.
Are prints still marked with serrated or uneven edges?


Go to step 2. The problem is solved.
a Check that all packaging material has been removed from the image-
processing unit.
1 Remove the toner cartridge and then remove the image unit. 2 Check that the packaging material has been correctly removed from the image processing unit.
Is the printer still printing empty pages?
Go to step 3. The problem is solved.
a Distribute the toner evenly across the image processing unit.
1 Remove the toner cartridge and then remove the image unit. 2 Shake the image processing unit well back and forth.
Is the printer still printing empty pages?
Step 3. Replace the image processing unit and re-send the print job.
Contact Customer support.
The problem is solved.
Is the printer still printing empty pages?
ABCDE ABBCTE AB CDE

Go to step 2. The problem is solved.
a Move the width and length guides in the drawer to the right
position for the paper placed in the printer. b Send the print job again.
Is the page or image not fully printed?
Step 2 Specify the type and size of paper in the tray from the Paper menu on the printer control panel.
Go to step 3. Perform one or more of the following operations:
Do the paper size and type of paper correspond to the paper in the drawer?
Go to step 4. The problem is solved.
a Specify the paper format via Preference Settings for
print or the printing dialog, depending on the pollination system. b Send the print job again.
Is the page or image not fully printed?
Contact Customer support.
The problem is solved.
a Replace the image processing unit in the printer.
1 Remove the toner cartridge. 2 Remove the image processing unit.
Is the page or image not fully printed?


Go to step 2. Set the type of paper to Transparent.
Check the printer's control panel to see if the type of paper is set to Transparent.
Step 2 Lower toner intensity and re-send the print job.
Step 3. Check that you are using a recommended type of color transparent and send the print job again.

Go to step 2. Place paper of the correct size and weight in the drawer.
Place paper of the correct size and weight in the drawer.
Does the loader contain paper of the correct size and weight?
Go to step 3. Make sure the paper in the drawer matches the type and weight settings specified by the tray settings.
Specify the paper type and weight settings in the tray from the Paper menu on the printer's control panel.
Is the drawer set to the type and weight of the paper in the drawers?
Troubleshooting 292


a Specify the paper type and weight settings in Preferences-
Print settings or print dialog, depending on your operating system. b Send the print job again.
Step 4. Replace the image processing unit and re-send the print job.

Check that Allowing Delete Background is set to Off.
a Set the Background option in the General Settings menu
allow deletion in on To. b Send the print job again.
Step 2 Change the toner intensity setting into a lighter value.
a In the Quality menu select a lower value to toner-
Troubleshooting 293

The problem is solved.
Go to step 4.
Put the toner cartridge back.
a Remove the cartridge from the printer. b Place the cartridge.
c Send the print job again.
Did the background disappear from the prints?
The problem is solved.
Contact Customer support.
Check that the broken white background is selected.
a Depending on your operating system you can use the broken-white
Set the background for Printer Properties or print dialog. b Send the print job again.
Did the background disappear from the prints?
ABCD ABCD ABCD
The problem is solved.
Go to step 2.
a Move the width and length guides into the right position for
paper placed in the printer. b Send the print job again.
Are the margins correct?

Go to step 3. Perform one or more of the following operations:
Specify the size of the paper in the drawer from the Paper menu on the printer's control panel.
Does the paper size match the paper in the drawer?
The problem is solved.
Contact Customer support.
a Specify the paper format via Preference Settings for
print or the printing dialog, depending on the pollination system. b Send the print job again.
Are the margins correct?
Go to step 2. Adjust the width and length guides.
Set the width and length guides in the drawer to the correct position for the size of the paper placed in the printer.
Are the width and length guides in the correct position?
Go to step 3. In the case of drawer settings, specify the type and weight of paper placed in the tray.
Specify the paper type and weight settings in the tray from the Paper menu on the printer's control panel.
Do paper and weight match the paper in the drawer?
Go to step 4. The problem is solved.
a Specify the paper type and weight settings in Preferences-
Print settings or print dialog, depending on your operating system. b Send the print job again.
Is the paper still curled?


a Remove the stack of paper from the drawer and turn the pile. b Send the print job again.
) ) ABCDE
ABCDE ABCDE
Go to step 2. The problem is solved.
a Adjust the width and length guides in the drawer to correct position
for the size of the paper placed in the drawer. b Send the print job again.
Are prints still containing irregularities?
Step 2 Specify the type and size of paper in the tray from the Paper menu on the printer control panel.
Go to step 3. In the case of drawer settings, specify the type and size of paper placed in the tray.
Do the printer settings for paper type and weight correspond to the paper in the drawer?
Go to step 4. The problem is solved.
a Specify the paper type and weight settings in Preferences-
Print settings or print dialog, depending on your operating system. b Send the print job again.
Are prints still containing irregularities?

Specify the paper structure in the drawer from the Paper menu on the printer's control panel.
Go to step 5.
Check that the paper in the drawer has a structure or rough finish.
Prints on paper with structure or rough finish?
Go to step 6. The problem is solved.
a Load paper out of a new suit.
Are prints still containing irregularities?
Step 6. Replace the image processing unit and re-send the print job.
Contact Customer support on http://support.lexma rk.com or your service representative.
The problem is solved.
Are prints still containing irregularities?
Step 1 Measure the distance between malfunctions.
Go to step 2. 1 Check that the distance between failures is 80 mm (3.15 inches) 2 Note the distance and contact Customer support on http://support.lexmark.com or your service representative.
Check that the distance between failures is equal to:
Is the distance between the failures equal to one of the dimensions mentioned?

Contact Customer support on http://support.lex mark.com or your servi- ce representative.
The problem is solved.
Replace the image processing unit and re-send the print job.
Are prints still contained in repeated malfunctions?
Go to step 2. The problem is solved.
a Specify lower value for toner intensity in the menu
Quality on the printer control panel.
Is the print still too dark?
Go to step 3. Perform one or more of the following operations:
a Enter the paper type, structure and weight settings of
the paper in the drawer on the printer's control panel, in the Paper menu. b Send the print job again.
Is the drawer set to the type, structure and weight of the paper in the drawers?

Go to step 4. The problem is solved.
a Specify the paper type, structure and weight settings
Print or print dialog preference settings depending on your operating system. b Send the print job again.
Is the print still too dark?
Step 4. Check that the paper in the drawer has a structure or rough finish.
In the Paper menu on the printer's deck panel, specify the structure settings that match the paper you print.
Go to step 5.
Prints on paper with structure or rough finish?
Go to step 6. The problem is solved.
a Load paper out of a new suit.
Is the print still too dark?
Contact Customer support.
The problem is solved.
Replace the image processing unit and re-send the print job.
Is the print still too dark?
Go to step 2. The problem is solved.
a Specify a higher value for toner intensity in the menu
Quality on the printer control panel.
Is the print still too light?

Go to step 3. Set the type of paper, paper structure and weight to the paper placed in the drawer.
Specify the paper type, structure and weight settings in the tray from the Paper menu on the printer's control panel.
Is the drawer set to the type, structure and weight of the paper in the drawers?
Go to step 4. The problem is solved.
a Specify the paper type, structure and weight settings
Print or print dialog preference settings depending on your operating system. b Send the print job again.
Is the print still too light?
In the Paper menu on the printer's deck panel, specify the structure settings that match the paper you print.
Go to step 5.
Make sure the paper has no structure or rough finish.
Prints on paper with structure or rough finish?
Go to step 6. The problem is solved.
a Load paper out of a new suit.
Is the print still too light?
Go to step 7. The problem is solved.
a Distribute the toner evenly across the image processing unit.
1 Remove the toner cartridge and then remove the image unit. 2 Shake the image processing unit well back and forth.
Is the print still too light?

Contact Customer support.
The problem is solved.
Replace the image processing unit and re-send the print job.
Is the print still too light?
) ) ABCDE
ABCDE ABCDE
Go to step 2. The problem is solved.
a Adjust the width and length guides in the drawer to correct position
for the size of the paper placed in the printer. b Send the print job again.
His prints still crooked?
Contact Customer support.
The problem is solved.
a Check if you print on paper supported by the
Tray. b Send the print job again.
His prints still crooked?


Go to step 2. The problem is solved.
a Replace the image processing unit in the printer.
1 Remove the toner cartridge and then remove the image unit.
Is the printer printing plain black pages?
Step 2 Replace the image processing unit and re-send the print job.
Contact Customer support.
The problem is solved.
Is the printer printing plain black pages?
Go to step 2. Set the type of paper to Transparent.
Specify the type of paper in the drawer from the Paper menu on the printer control panel.
Is the type of paper for the drawer set to Transparent?
Contact Customer support.
The problem is solved.
a Check that you are using a recommended type for transparency. b Send the print job again.
Is the print quality still bad?
ABCDE ABBCTE AB CDE

Go to step 2. The problem is solved.
a Enter the tray or input in Print Preferences Settings
or the print dialog, depending on the operating system. b Send the print job again.
Do printing contain horizontal stripes?
Go to step 3. Set the type of paper and weight to the paper placed in the drawer.
Specify the paper type and weight settings in the tray from the Paper menu on the printer's control panel.
Do paper and weight match the paper in the drawer?
Go to step 4. The problem is solved.
a Load paper out of a new suit.
Do printing contain horizontal stripes?
Go to step 5. The problem is solved.
a Replace the image processing unit in the printer.
1 Remove the toner cartridge and then remove the image unit.
Do printing contain horizontal stripes?
Step 5. Replace the image processing unit and re-send the print job.
Contact Customer support.
The problem is solved.
Do printing contain horizontal stripes?

ABCDE ABBCTE AB CDE
Go to step 2. The problem is solved.
a Specify the paper type, structure and weight settings
Print or print dialog preference settings depending on your operating system. b Send the print job again.
Do printing contain vertical stripes?
Go to step 3. Perform one or more of the following operations:
Specify the paper structure, type and weight settings in the tray from the Paper menu on the printer's control panel.
Do paper structure, type and weight correspond to the paper in the drawer?
Go to step 4. The problem is solved.
a Load paper out of a new suit.
Do printing contain vertical stripes?


Contact Customer support on http://support.lexma rk.com or your service representative.

a Check that your software uses the correct filling pattern. b Send the print job again.
a Place a recommended paper size in the specified tray or
Troubleshooting 305


1 Remove the toner cartridge and then remove the image unit. 2 Shake the image processing unit well back and forth.
Step 4. Replace the image processing unit and re-send the print job.

a Check that your software uses the correct filling pattern. b Send the print job again.
a Specify the paper type and weight settings
in the drawer on the printer's control panel, in the Paper menu. b Send the print job again.
Troubleshooting 306

Go to step 4. The problem is solved.
Check that you are using a recommended paper type.
a Place a recommended paper size in the specified tray or
import. b Send the print job again.
Do printing contain vertical interruptions?
Go to step 5. The problem is solved.
a Distribute the toner evenly across the image processing unit.
1 Remove the toner cartridge and then remove the image unit. 2 Shake the image processing unit well back and forth.
Do printing contain vertical interruptions?
Step 5. Replace the image processing unit and re-send the print job.
Contact Customer support.
The problem is solved.
Do printing contain vertical interruptions?
Replace the image processing unit and re-send the print job.
Contact Customer support.
The problem is solved.
Did the prints contain toner spots?
ABCDE
ABCDE ABCDE


Step 1 Replace the image processing unit in the printer.
Contact Customer support on http://support.lexma rk.com or your service representative.

Step 1 Check the paper type, texture and weight in the Paper menu on the printer's control panel.
Go to step 2. In the case of drawer settings, specify the type, structure and weight of paper placed in the tray.
Do the settings for paper type, texture and weight correspond to the paper in the drawer?
Solving problems 308

Replace the image processing unit and re-send the print job.
Contact Customer support.
The problem is solved.
Is the printing density uneven?
Clear the error or status message.
Go to step 2.
Check if an error or status message is displayed on the display.
Is an error or status message displayed?
Go to step 3. Connect the power cord to the printer and a grounded outlet.
Check that the power cord is connected to the printer and a grounded socket.
Is the power cord connected to the printer and a grounded outlet?
Step 3. Disable the printer and turn on the printer after about ten seconds.
The problem is solved.
Contact Customer supportif you want to scan any more pages.
Become Self-test is being performed and Done - I'm not sure.
Check for any blockages between the scanner unit and the printer.
The problem is solved.
Contact Customer supportif you want to scan any more pages.
a Lift up the scanner unit. b Remove any blockages that may cause the scanner unit
Hold it open. c Lower the scanner unit.
Is the scanner unit well closed?

Step 1 Check if an error or status message is displayed on the display.
Clear the error or status message.
Go to step 2.
Is an error or status message displayed?
Go to step 3. Increase scan resolution for better export quality.
Check the quality of the original document.
Is the quality of the original okay?
Go to step 4. Consult 'Clean the glass plate' on page 229.
Clean the glass plate and ADF glass plate with a clean, fluff-free and damp cloth if dark spots appear on copies.
Is the glass plate clean?
Go to step 5. See 'Problem with the Print Quality' on page 288.
Send a print job and check if there are any problems with the printing quality.
a Adjust the settings of Eco mode in the General menu
The Commission's proposal is based on the following principles: b Adjust the setting for toner intensity in the Copy menu.
c If the prints remain vague, replace the toner cartridge.
Is the print quality okay?
Step 5. Check that the document or photo is correctly placed.
Go to step 6. Place the document or picture with the print side down in the top-left corner of the glass plate.
Make sure that the document or picture is placed on top of the glass plate, with the printed side facing down.
Is the document or photo correctly entered?
The problem is solved.
Go to step 7.
Increase scan resolution for better export quality.
Has the higher resolution resulted in high quality prints?
Step 7. Check the copying settings.
Go to step 8. Change the configurations for Content Type and Source so that they are correct for the document you want to scan.
Check in the Copy screen to see if the Content Type and Source settings are suitable for the document that needs scanning.
Are the Content Type and Source settings correct for the document you want to scan?

Go to step 9. The problem is solved.
Check the print for cartridges.
a Browse the Copy screen to:
Advanced Options > Advanced image processing > Sharpness > lower the Sharpness setting b Check in the Copy screen whether the function for it
adjustment of the scale is not enabled.
Any patterns on prints?
Step 9. Check if printing is missing text or if it is vague.
Go to step 10. The problem is solved.
a Browse the Copy screen to:
Advanced Options > Advanced image processing b Adjust the settings:
Is there missing text on print or is it vague?
Contact Customer supportif you want to scan any more pages.
The problem is solved.
Check if the print is flets or overlit.
a Browse the Copy screen to:
Advanced Options > Advanced image processing b Adjust the following settings:
Are there copies of flets or over-exposed?
Go to step 2. Place the document or picture with the print side down in the top-left corner of the glass plate.
Check that the document or photo is correctly placed.
Make sure that the document or picture is placed on top of the glass plate, with the printed side facing down.
Is the document or photo correctly entered?

Go to step 3. Change the paper size setting to match the size of the paper placed in the drawer or place paper in the tray corresponding to the paper-size setting.
Check that the paper size setting matches the size of the paper placed in the drawer.
Check the paper size setting in the Paper menu.
Does the paper size setting match the size of the paper in the drawer?
The problem is solved.
Contact Customer supportif you want to scan any more pages.
a Specify the paper size. Specify the paper size via
Print or print dialog preference settings depending on the operating system. b Send the print job again.
Are copies printed properly?

a In the start screen, browse for:
The problem is solved.
Contact Customer supportif you want to scan any more pages.
> Institutions > General Settings > Run initial setup > Yes > Send b Turn off the printer and turn it back on.
The screen 'Select the language you want' is displayed on the printer display.
c Select a language and hit
On. d Select a country or region and press Next. e Select a time zone and then hit Next On.
f Select Fax and E‑mail and hit Next On.
Have the fax and email functions been set?
Track display is not working.
Please contact your telecommunications company to verify that you are subscribed to the Number Display Service.
The problem is solved.
Contact Customer supportif you want to scan any more pages.
Is the caller ID displayed?
Step 1 Check if an error or status message is displayed on the display.
Clear the error or status message.
Go to step 2.
Is a status or error message displayed on the display?
Step 2 Check that the power cord is connected to the printer and a grounded socket.
Go to step 3. Connect the power cord to the printer and a grounded outlet.
Is the power cord connected to the printer and a grounded outlet?

Go to step 4. Turn on the printer and wait until Done is displayed on the display.
Check the power supply.
Check that the printer plug is in the socket properly, whether the printer is enabled and if Done is displayed on the printer display.
Is the printer on and will be there Done Displayed on the display?
Step 4. Check the printer connections.
Go to step 5. Make sure the cables are secure.
If applicable, check that the cables of the following devices are properly connected:
- Are the cables secure?
The problem is solved.
Go to step 6.
a Check the wall connection for phones.
1 Connect the phone to the wall socket. 2 Listen to me, if you hear a dial tone. 3 If you do not hear a dial tone, connect another phone cable to the socket. 4 If you still don't hear a dial tone, then connect the phone cable to another wall socket. 5 If you hear a dial tone, connect the printer to that wall con-tact box. b Try sending or receiving a fax.
Can you send or receive a fax?

Go to step 7. Connect the printer to an analogue telephone service or the right digital connector.
Check that the printer is connected to an analogue telephone service or the correct digital connector.
The fax modem is an analogue device. You can connect certain devices to the printer to use digital telephony services.
Is the printer connected to an analogue telephone service or the right digital connector?
Step 7. Listen to me, if you hear a dial tone.
Did you hear a dial tone?
Step 8 Temporarily disconnect other devices (such as answering machines, modem computers or telephone line splitters) between the printer and phone line and then try to send or receive a fax.
The problem is solved.
Go to step 9.
Can you send or receive a fax?
Troubleshooting 315 · Action Yes No · Step 6.

The problem is solved.
Go to step 10.
a Turn off the call function temporarily. Contact
with the telephone company for the keypad code that allows you to temporarily disable this function. b Try sending or receiving a fax.
Can you send or receive a fax?
The problem is solved.
Go to step 11.
a Temporarily disable voice mail service. Contact your
phone company for more information.
Can you send or receive a fax?
The problem is solved.
Contact Customer supportif you want to scan any more pages.
Scan the original document page for page.
a Choose the fax number. b Scan the document page by page.
Can you send or receive a fax?
Step 1 Check the drawer or charger.
The problem is solved.
Go to step 2.
Place paper in the drawer or charger when empty.
Can you get faxes?

The problem is solved.
Go to step 3.
Check the settings for maximum number of call signals.
a Open a web browser and type the printer's IP address in
address bar.
lings. c Enter the number of call signals in the 'Number of bell signals' field that you use
wants to hear before the printer takes the call. d Click on Send.
Can you get faxes?
Step 3. Replace the toner cartridge. Please refer to the instructions in the supply for more information.
The problem is solved.
Contact Customer supportif you want to scan any more pages.
Can you get faxes?
The problem is solved.
Go to step 2.
Check that the printer is in fax mode.
In the start screen you hit Fax to turn the printer into fax mode, then send the fax.
Can you send faxes?
Step 2 Place the original document correctly on the glass plate.
The problem is solved.
Go to step 3.
Place the document with the side to be sent upwards and the short side forward in the ADF drawer, or on top left of the glass plate with the face to be transmitted downwards.
Can you send faxes?

The problem is solved.
Contact Customer supportif you want to scan any more pages.
Set the shortcut number correctly.
Can you send faxes?
Step 1 Ask the sender of the fax to:
The problem is solved.
Go to step 2.
a Check that the original document is of good quality. b Increase the scan resolution of the fax (if possible).
c Re-send the fax.
Is the fax print quality okay?
Step 2 Lower the fax transmission rate for incoming faxes.
The problem is solved.
Go to step 3.
a Open a web browser and type the printer's IP address in
address bar.
c Click on the Max menu. speed at any of the following:
Is the fax print quality okay?

The problem is solved.
Contact Customer supportif you want to scan any more pages.
Replace the toner cartridge.
When the message Cartridge almost empty [88.xy] If you are showing, replace the cartridge and send the fax again.
Is the fax print quality okay?
Go to step 2. Turn on the printer.
Check that the printer is enabled.
- Is the printer enabled?
Go to step 3. Connect the printer cable firmly to the printer and on computer, print server, option or other networkap- ready.
Check that the printer cable is securely connected to the printer and to the computer, print server, option or other network device.
Is the printer cable securely connected to the printer and computer, print server, option or other network device?
Go to step 4. Connect the power cord to the printer and a grounded outlet.
Check that the power cord is connected to the printer and a grounded socket.
Is the power cord connected to the printer and a grounded outlet?
Step 4. Check that the power outlet is switched off using a switch or circuit breaker.
Turn on the switch or reset the circuit breaker.
Go to step 5.
Is the power outlet switched off using a switch or circuit breaker?

Connect the mains cord of the printer directly to a grounded outlet.
Go to step 6.
Check if the printer is connected to an overvoltage device, a UPS or an extension cord.
Is the printer connected to an overvoltage protection, a UPS or an extension cord?
Step 6. Check the other electrical equipment connected to the power outlet.
Disconnect the other electrical equipment and switch on the printer. If the printer is not working, reconnect other electrical equipment and move to step 6.
Go to step 7.
Does the other electrical equipment work?
The problem is solved.
Contact Customer supportif you want to scan any more pages.
Disable the printer and turn on the printer after about ten seconds.
- Is the printer and scanner working?
Step 1 Check the cable connection.
Go to step 2. Connect the cables properly.
Make sure the Ethernet or USB cable is properly connected to your computer and printer.
- Are the cables well connected?
Change the filename.
Go to step 3.
Check if the filename is already being used.
Is the file name already used?
Close the file you are scanning.
Go to step 4.
Check whether the document or photo you want to scan is open in another application or if it is used by another user.
Is the file you want to scan opened in another application or is it used by another user?

Go to step 5. Select Add Time Temple or Overwrite existing file In the destination Configuration Settings.
Check that Add Timestamp or Overwrite existing file is selected in the destination configuration settings.
Is Add Timestamp or Overwrite existing file Selected in the destination configuration settings?
Step 5. Lower the scan resolution setting in the Flash drive menu and send the scanning task again.
The problem is solved.
Go to step 6.
Is the task being scanned?
The problem is solved.
Change the configurations for Content Type and Source so that they are correct for the document you want to scan.
Check the scan settings.
Check in the Scan screen to see if content type and source settings are suitable for document that needs scanning.
Are the Content Type and Source settings correct for the document you want to scan?
Check for any blockages in the scanner unit.
The problem is solved.
Contact Customer supportif you want to scan any more pages.
a Lift up the scanner unit. b Remove any blockages while keeping the valve open.
c Lower the scanner unit.
Is the scanner unit well closed?
Step 1 Check if there are any other applications that disrupt scan.
Go to step 2. The problem is solved.
Close all applications that are not used.
Is scanning still too long or is the computer jammed?
Contact Customer supportif you want to scan any more pages.
The problem is solved.
Select a lower scan resolution.
Is scanning still too long or is the computer jammed?

Step 1 Check if a status or error message is displayed on the display.
Clear any error.
Go to step 2.
Is an error message displayed on the printer display?
Go to step 3. Increase scan resolution for better export quality.
Check the quality of the original document.
Is the quality of the original okay?
Go to step 4. Consult 'Clean the glass plate' on page 229.
Clean the glass plate and ADF glass plate with a clean dust-free cloth moistened with water.
Is the glass plate clean?
Go to step 5. Place the document or picture with the print side down in the top-left corner of the glass plate.
Check that the document or photo is correctly placed.
Make sure that the document or picture is placed on top of the glass plate, with the printed side facing down.
Is the document or photo correctly entered?
Go to step 6. See 'Problem with the Print Quality' on page 288.
Send a print job and check if there are any problems with the printing quality.
Is the print quality okay?
Step 6. Increase scan resolution for better export quality.
Problem solved. Go to step 7.
Has the higher resolution resulted in high quality prints?
Contact Customer supportif you want to scan any more pages.
Change the configurations for Content Type and Source so that they are correct for the document you want to scan.
Check the scan settings.
Check in the Scan screen to see if content type and source settings are suitable for document that needs scanning.
Are the Content Type and Source settings correct for the document you want to scan?

Check that the document or photo is correctly placed.
Contact Customer supportif you want to scan any more pages.
Place the document or picture with the print side down in the top-left corner of the glass plate.
Make sure that the document or picture is placed on top of the glass plate, with the printed side facing down.
Is the document or photo correctly entered?
Step 1 Check that the printer is enabled and that Done the printer's bedi-ction panel is displayed before scanning.
Go to step 3. Go to step 2.
Appears Done Before you start scanning?
Step 2 Disable the printer and turn on the printer after about ten seconds.
Clear any error.
Go to step 3.
Is an error message displayed on the printer display?
Contact Customer supportif you want to scan any more pages.
Check the cable connections.
Make sure that the cables between the printer and the print server are securely attached.
For more information, please refer to the printer installation documentation provided.
Are the cables between the printer and the print server well attached?

Step 1 Check the system log file for relevant details.
Go to step 2. Contact Customer supportif you want to scan any more pages.
a Open a web browser and type the printer's IP address in
address bar. If you do not know the printer's IP address, you can:
>tab System > Log. c Select an application status from the Filter menu. d Select an application from the Application menu and click
Send. Is an error message displayed in the log file?
The problem is solved.
Contact Customer supportif you want to scan any more pages.
Fix the mistake.
Is the application working now?
The problem is solved.
Go to step 2.
a Turn on the printer. b Open a web browser and type the printer's IP address.
c Press Enter.
Does the Embedded Web Server open?

The problem is solved.
Go to step 3.
Check that the printer's IP address is correct.
a Display the printer's IP address:
Does the Embedded Web Server open?
The problem is solved.
Go to step 4.
Check that the network is working.
a Print a page with network settings. b Check the first part of the page with network setup-
The printer must be connected to the status.
Note: If status indicates that the printer is not connected, there may be a fault of connection or the network cable is not functioning properly. Contact the system administrator to resolve this problem and then print another page of network settings. c Open a web browser and type the printer's IP address. d Press Enter.
Does the Embedded Web Server open?
Step 4. Check that the cable connections to the printer and print server are securely attached.
The problem is solved.
Go to step 5.
a Connect the cables properly. Please refer to the supplied
printer installation documentation for more information. b Open a web browser and type the printer's IP address.
c Press Enter.
Does the Embedded Web Server open?
Step 5. Disable the web proxy servers temporarily.
The problem is solved.
Contact the system support department.
Proxy servers can ensure that you have no or limited access to certain websites including the Embedded Web Server.
Does the Embedded Web Server open?

Before contacting customer support, make sure you have the following information:
Go http://support.lexmark.com for support by email or via chat, or browse the library of manuals, supporting documentation, drivers and other downloads.
Technical support via the phone is also available. In the US or Canada, call 1-800-539-6275. Go to other countries or regions http://support.lexmark.com.
Troubleshooting 326

Product name:
Lexmark MX610de, MX611de,MX611,dhe,Mx617de
Device type:
Models:
The following paragraph shall not apply to countries where the conditions are contrary to national law: LEXMARK INTERNATIONAL, INC., THIS PUBLICATION AS SUCH PROVIDES WITHOUT ANY FORM OF GUARANTEE, NEITHER IMPLIED NOR EXPLICIT, INCLUDING BUT NOT LIMITED TO THE IMPLICIT GUARANTEES OF MERCHANTABILITY OR SUITABILITY FOR A PARTICULAR PURPOSE. In some jurisdictions, rejection of explicit or implied guarantees is not permitted in certain transactions, so this statement may not apply to you.
This publication may contain technical inaccuracies or typographical errors. The information contained in this publication is regularly reviewed, changes will be included in subsequent expenditure. The products or programmes described may be improved or modified at any time.
References in this publication to products, programmes or services do not imply that the manufacturer intends to place these products on the market in all countries where the manufacturer is active. A reference to a product, program or service does not mean that only that product, programme or service can be used. Instead, all functionally equivalent products, programmes or services, which do not infringe existing intellectual property rights, may be used. The user shall be responsible for the evaluation and control of operation in conjunction with other products, programmes or services, except those products, programs or services specified by the manufacturer.
Go http://support.lexmark.com for technical support of Lexmark.
Go www.lexmark.com for information on supplies and downloads.
© 2017 Lexmark International, Inc.
All rights reserved.
Lexmark, the Lex mark logo, MarkNet, AccuRead and MarkVision are trademarks or registered trademarks of Lex Mark International, Inc. or its subsidiaries, deposited in the United States and/or other countries.
Google Cloud Print is a trademark of Googel Inc.
Notifications 327 · 630, 670, 675 · June 2017

Mac and the Mac logo are trademarks of Apple Inc., filed in the United States and other countries.
Microsoft and Windows are registered trademarks or trademarks of the Microsoft business group in the United States and other countries.
Mopria®, the Mopria® logo and the Mopri® Alliance logo are registered trademarks and service marks of Mopria Alliance, Inc. in the United States and other countries. Unauthorized use is strictly prohibited.
PCL® is a registered trademark of Hewlett-Packard Company. PCL is an indication of Hewlett- Packard Company for a collection of printer assignments (printer language) and functions in its products. This printer is designed to support the PCL language. The printer recognizes PCL commands used in various applications and emulates the functions corresponding to these commands.
PostScript is a registered trademark of Adobe Systems Incorporated in the United States and other countries.
The following terms are trademarks or registered trademarks of these companies:

CG Times Based on Times New Roman licensed by The Monotype Corporation plc, it is a product of the Agfa Corporation
Notifications 328

Times New Roman The Monotype Corporation plc
Univers Linotype-Hell AG and/or subsidiaries
Other trademarks are the property of their respective holders.
AirPrint and the logo of AirPrint are trademarks of Apple, Inc.
The following measurements are made in accordance with ISO 7779 and reported according to ISO 9296.
Noise pressure on average 1 m, dBA
Printing 55 (single side); 54 (double side)
Scanning 55
Copying 56
Ready
Values can be changed. Go www.lexmark.com for current values.
Ambient temperature 15.6 to 32.2 °C
Temperature for transport -40 to 43.3 °C
Temperature for storage and relative humidity 1 to 35 °C
8 to 80% RH
The WEEE logo indicates that there are specific recycling programmes and procedures for electronic products in the countries of the European Union. We ask you to recycle our products.
If you have further questions about recycling options, please visit Lexmark's website at www.lexmark.com for the phone number of your local supplier.
Notifications 329

This product compositions with the India E-Waste (Management and Handling) Rules, 2011, which prohibit use of lead, mercury, hexavalent chromium, polybrominated biphenyls, or polybrominated diphenyl ethers in concentrations exceeding 0.1% by weight and 0.01% by weight for cadmium, except for the exemption set in Schedule II of the Rules.
Do not throw away the printer or components with household waste. Contact your municipality for disposal and recycling options.
This symbol indicates components sensitive to static electricity discharge. First touch the metal frame of the printer before touching anything in areas marked with this symbol.
All Lexmark products with the ENERGY STAR logo on the product or on a home screen are certified in accordance with EPA's ENERGY STAR requirements, if the configuration set by Lex Mark still applies.
The printer is certified in the United States as a product that meets the requirements of DHHS 21 CFR Chapter 1, Subpart J for Class I (1) laser products. Elsewhere, the printer is certified as a class I laser product that meets the requirements of IEC 60825-1: 2014.
Class I laser products shall be considered as not presenting any danger. The printer contains an internal class IIIb (3b) laser, a gallium arsenide laser with a rated power of 12 milliwatts and a wavelength range of 655-675 nanometers. The laser system and printer are designed to ensure that users never experience laser radiation higher than the permitted level for Class I devices, during normal use, maintenance work by the user or prescribed service activities.
Notifications 330

The label containing safety information may be affixed to the printer as follows:
Opasnost - Nevidljivo lasersko zračenje kada su kasete uklonjene i poništena sigurnosna veza. Izbjegavati izlaganje zracima. NEBEZPEČÍ - Když jsou vyjmuty kazety a je odblokována pojistka, zkla ze z. je vysíláno neviditelné laserové záření. Nevystavujte se působení laserového paprsku.
FARE - Usynlig laserstråling, når patroner fjernes, og spærreanordningen er slået fra. Undgå at blive udsat for laserstrålen.
VAARA - Näkymätöntä lasersäteilyä on varottava, kun värikasetit on postettu ja lukitus on auki. Vältä lasersäteelle altistumista. GEFAHR - Uninvitable Laserstrahlung beim Herausnehmen von Druckkassetten und offener Sicherheitssperre. Laserstrahl girls.
ΚΙΝΔΥΝΟΣ - иκλυση αόρατης ακτινοβολίος laser κατά την αφαίρεση των καρετών σηναπασφάλισητης μανδάλωσης. Αποφεύγετε την έκθεση στην ακτινοβολία laser. VESZÉLY . . Nem látható lezersugárzás fordulhat elő a patronok eltávolításakor és a zárószerkezet felbontásalkor. Kerülje a lezersugárnak való kitettséget.
ОПАСНО! Невидимое лазерное излучение при извнеченных картриджах и снятии блокировки. Избегайне воздействия лазерных лучей. Pozor . . Nebezpečenstvo neviditeľného laserového žiarenia pri odobratých kazetách a odblokovanej poistke. Nevystavujte sa lúčom.
. . - ., .
Power consumption
Power consumption of the product
The following table describes the printer's energy consumption characteristics.
Mode Description Power consumption (Watt)
Printing
Paper copies of electronic imports shall be made with the product.
640 (single sided); 460 (double sided)
Copying Paper copies of paper originals are made with the product.
Scan Paper originals are scanned with the product. 35
Ready The product is waiting for a printing job. 20
Sleep Mode The normal device save mode is activated. 3.5
Snooze mode The optimal saving mode of the device is activated. 0.4
The product is connected to an outlet, but the device is switched off.
The energy consumption levels shown in the previous table indicate measurements of average times. Immediate energy reductions can be substantially higher than the average.
Values can be changed. Go www.lexmark.com for current values.
Notifications 331

This product has an energy-saving mode called sleep mode. In sleep mode, energy is saved by reducing power consumption during longer periods of time when the device is not active. The sleep mode is automatically switched on when the product is not used for a pre-set period (timeout for sleep mode).
Default setting for the time-out of this product (in minutes): 20
You can set the time-out for sleep mode from configuration menus between 1 minute and 120 minutes. If you set the sleep timeout to a low value, energy consumption will decrease but product response times may increase. When you set the time-out for sleep mode to a high value, the printer reacts quickly but more energy is consumed.
This product has a mode in which it consumes very little energy called slumber mode. If the printer's slumber mode is active, other systems and devices will be switched off safely.
You can use the following methods to enable slumber mode:
The standard slumber mode time-out for this product in all countries or regions 3 days
You can set the time period that the printer waits for before the slumber mode is enabled after a task has been printed between one hour and one month.
If this product has a state in which it is switched off but still consumes a small amount of energy and you want to stop the power consumption completely, pull the plug on the product from the socket.
It is sometimes useful to calculate the total energy consumption of the product. As the power consumption is indicated in watts, the current consumption should be multiplied by the time that each mode is active on the product. This way you can calculate the energy consumption. The total energy consumption of the product is the sum of the energy consumption for all modes.
This section contains information on the regulatory framework for products containing telecommunications terminal equipment, such as fax machines.
Notifications 332

This product complies with the safety requirements of Directives 2014/30/EU, 2014/35/EU, 2009/125/EC and 2011/65/EU of the Council of the European Community concerning harmonisation of Member States' laws on electromagnetic compatibility and safety of electrical equipment designed for use within certain voltage limits, energy efficiency of products consuming energy and restriction of the use of certain hazardous substances in electrical and electronic equipment.
The manufacturer of this product is: Lexmark International, Inc., 740 West New Circle Road, Lexington, KY, 40550, United States. The recognised representative is: Lexmark International Technology Hungária Kft., 8 Lechner Ödön fasor, Millennium Tower III, 1095 Budapest HUNGARY. A declaration of conformity to the requirements of the regulations may be obtained on request from the approved representative or www.lexmark.com/en us/about/regulatory-compliance/european-union-declaration-of-conformity.html.
This product meets the requirements of EN55022 and EN55032 with regard to Class B products and safety requirements of either EN 60950-1 or EN 62368-1.
The use of this product or service is subject to the reasonable, non-discriminatory terms in the Intellectual Property Rights (IPR) Disclosure of Certicom Corp. at the IETF for Elliptic Curve Cryptography (ECC) Cipher Suites for Transport Layer Security (TLS) implemented in the product or service.
The use of this product or service is subject to the reasonable, non-discriminatory terms in the Intellectual Property Rights (IPR) Disclosure of Certicom Corp. at the IETF for TLS Elliptic Curve Cipher Suites with SHA-256/382 and AES Galois Counter Mode (GCM) implemented in the product or service.
The use of this product or service is subject to the reasonable, non-discriminatory terms in the Intellectual Property Rights (IPR) Disclosure of Certicom Corp. at the IETF for TLS Suite B Profile for Transport Layer Security (TLS) implemented in the product or service.
The use of this product or service is subject to the reasonable, non-discriminatory terms in the Intellectual Property Rights (IPR) Disclosure of Certicom Corp. at the IETF for Addition of the Camellia Cipher Suites to Transport Layer Security (TLS) implemented in the product or service.
The use of certain patents in this product or service is subject to the reasonable, non-discriminationary terms in the Intellectual Property Rights (IPR) Disclosure of Certicom Corp. at the IETF for AES-CCM ECC Cipher Suites for TLS implemented in the product or service.
The use of this product or service is subject to the reasonable, non-discriminatory terms in the Intellectual Property Rights (IPR) Disclosure of Certicom Corp. at the IETF for IKE and IKEv2 Authentication Using the Eliptic Curve Digital Signature Algorithm (ECDSA) implemented in the product or service.
The use of this product or service is subject to the reasonable, non-discriminatory terms in the Intellectual Property Rights (IPR) Disclosure of Certicom Corp. at the IETF for Suite B Cryptographic Suites for IPSec implemented in the product or service.
The use of this product or service is subject to the reasonable, non-discriminatory terms in the Intellectual Property Rights (IPR) Disclosure of Certicom Corp. at the IETF for Algorithms for Internet Key Exchange version 1 (IKEv1) implemented in the product or service.
Notifications 333

Different format, menu 143 answering machine
Security check log, 167 check menu, 85 print jobs
set 109 AppleTalk, menu 155
printer 227 Edit security settings, menu 163 security slot 49 blocking unwanted faxes 126 letterhead
prints from a Macintosh-
computer 86 printing via Windows 86, status of parts and supplies 230 check, virtual display
indicator lamp 17 Sleep button, light of 17 image processing unit
place copy on 90 paper,
with the Embedded Web
order 232 replace 235 Image processing unit almost empty [84.xy] 261, 262 Image processing units nearly empty, estimated number of remaining pages is [x] [84,xy ] 262 Home screen
multifunctional input 62 tips for using 71
C Cartridge almost empty [88.xy] 257 Cartridge almost blank, estimated number of remaining pages is [x] [88!xy ] 257 Cartridge and image processing unit do not match [41.xly] 257 encoding, printer hard disk 226 Complex page, certain data may not be printed [35] 259 Configuration modified, some interrupted tasks have not been recovered [57] 259 Configuation U-loader, menu 143 configuration data
setup 121 Set date/time, menu 168 The printer had to be restarted. The last task may not be completed. Clear the printer's hard drive 225 Digital Subscriber Line (DSL)
customize 23 icons hide 23 icon view 23 admin settings
Embedded Web Server 241 message
email options 105 available, internal options 30 saving settings
Fax settings 113 digital telephone service
Eco Mode 218 Adjust brightness 221 Planning current rate 221 Sleeping position 220 Lullaby stand 220 Loop time-out 220 Silent mode 219 file name
print 87 display, printer control panel 17
Configure wireless network 51
Adjust brightness 221 display problems solve
printer display is empty, printing 276 documents
scan options 136 file type for output
Maintenance kit 242 supply, reports about
from a computer 81 from a mobile
scan, resize image 136 105 file type for output
device 82, 83 wireless network
Configure image processing unit 242, configure email settings 101, conify supplies 242 notifications, port settings 54 contact customer support 326 Check connection input tray [x] 258
configuration data 51 Wireless, menu 154 wireless network installation
order e-mails 105
image processing unit 232 non-cassettes 232 maintenance kit 232 ordering, supplies
with the Embedded Web
Server 54 Push button, configuration method
use 53 DSL filter 113 double sided 92


Flash not formatted [53] 273 flash drive
types installed on the
sent, but cannot be received 316 cannot send faxes or
printer 224 memory of the hard drive of the printer
print from 83 Flash drive, menu 201 flash drives
received 313 faxes may be received, but
Clear 225 Memory full [0] 266 Memory Full: Cannot print faxes 266 memory card 30
failed to send 317 track view working
file types 84 forms print 81 Forms and Favorites
not 313 received fax has a bad
Set 24 Forms and Favorites Use 81 Photos
install 32 problems solve 278 noise levels 329 glass plate
printing quality 318 Faxes, screen
advanced options 130 Fax memory full 261 fax settings
copy 89 Error reading USB hub. Remove hub. 260 Error reading from USB drive. Remove USB. 260 FTP
Copy via 89 Clean 229 Google Cloud Printer
Digital telephone service 116 DSL connection 113 country or region specific
use 82 green settings
Ecomode 218 Planning current level 221 Snoozing position 220 Snooping time-out 220 Silent mode 219
109 VoIP 115 Fax Log
printer control panel 132 FTP address, scan to
view 126 Fax mode (Analog fax settings), menu 181 Fax mode, menu 190 fax name, set 121 fax number, set up 121 fax options
use printer 132 shortcut number
where you can find it 241 add hardware options
use 132 FTP settings, 197 FTP options
printer driver 50 repeated print failures on printing 297 repeated print jobs 85
FTP 136 Advanced Options 138 FTP Window
content source 128 content type 128 intensity 129 page setting 129 resolution 129 scan preview 129 delayed sending 129 Fax partition not working. Consult the system administrator. 261 Fax server 'According to format' is not set. Consult the system administrator. 261 finisher
prints from the Macintosh-
computer 86 printing via Windows 86 The device is in safe mode. Some print options may be disabled or deliver unexpected results. 272 horizontal stripes on print 302 HTML, menu 216 Tool ScanBack
Fax 130 FTP 99 FTP options 138 advanced options, touch screen
email 107 No [supply type] of Lexmark, see User Manual [33.xy] 266 No analogue phone line connected to the modem, fax is disabled. 266
use 135 utility ScanBack 135 Tool Tools, menu 211
paper formats 79 firmware card 30 Flash damaged




icons show on the home screen 23 PIN, method
move 11, 240 transport 240 complete configuration 12 printer prints empty pages 289 printer clean 228 printer transport 240 printer prepare for connection to Ethernet network 51 printer, control panel 17
for front valve 248 in tailgate 247 in automatic
53 Plate [name of modified type] [printing mode paper] in [paper source] 263 Place [adapted string] [paper print position] in the multifunctional input 264 Place [name adapted type] in multifunctional import 264 Place[paper format] [picture mode paper ] in [papier source] 264 Place (paper size] [papier printing mode] in Multifunctional imports 265 Place [paper type][paper size) [print mode paper.] in [ paper source] 244 Place [papier type] (paper format) [paper printing mode ] in the multiple function import 265 Place (signal for adjusted paper] [printed mode paper) in [printable source] 263 Replace all originals when you restart the task. 268 Place input drawer [x] 262 Place missing or non-reactive cartridge back [31.xy] 269 Location stuck origin. back to opn. start task. 269 position for printer to determine 11 Planning current mode
document input 246 in duplex unit 250 load 252 multifunctional import 251 paper labels
multifunction input 62 paper size
Set 57 Paper Size/Speed, 140 paper sizes menu
Recover 243 brightness adjust 221 indicator light 17 Sleep button, light of 17 printer, simple troubleshoot 274 printer, hard drive
supported 76 Paperweight, menu 145 paperweights
supported by printer 78 paper input, troubleshooting
encoding 226 install 42 wipe 225 delete 45 discard 224 printer, hard drive encode 226 printer messages
message remains after malfunction
has been corrected 280 paper type
suitable for which tray (s) 78 supported by printer 78 paper stop, use 67 paper failure fix
empty [84.xy] 261, 262 Image processing unit almost
empty, expected to print [x] pages [84.xy] 262 Cartridge almost empty
avoid 244 paper failures
[88.xy] 257 Cartridge almost empty, estimated
number of remaining pages is [x] [88.xy] 257 Cartridge and
document input 246 in duplex unit 250 in finisher 253 in standard output drawer 246 load 252 multifunction input 251 Paper structure, menu 143 Parallel [x], guy 157 Parallel port [x ] disabled
image processing unit do not match [41.xy] 257 Complex page, certain
use 221 Planning current mode to use 221 port settings
data may not be printed [35] 259 Configuration modified,
configure 54 port settings
some interrupted tasks have not been restored [57] 259 Check connection
Internal Solutions Port 54 PostScript, menu 213 printer
input tray [x] 258 The printer had to be re-
finishing functions 79 base model 12 minimum installation space 11 select, location 11
hide 23 view 23
are being started. The last task may not be completed. 267

Fax memory full 261 Fax partition not working.
Insufficient memory to allow the
to sort a task [35] 262 Insufficient memory for
administrator [840.01] 271 Scanner disabled. Take
Consult the system administrator. 261 Fax server 'According to format' is
Supporting source storage function [35] 263 Insufficient memory,
contact the system administrator if the problem continues to arise. [840.02] 271 Scanner failure: remove all
not set. Consult the system administrator. 261 Flash Damaged [51] 260 Flash Not Formatted
some interrupted tasks are not recovered [35] 263 Insufficient memory,
originals from the scanner [2y.xx] 271 Scanner failure: remove
[53] 273 Error reading USB hub.
some interrupted tasks have been removed [35] 263 Insufficient free space in
Remove hub. 260 Error reading from USB drive.
Stuck originals from the scanner [2y.xx] 271 Disk almost full. Safe
Flash memory for sources [52] 267 Paper should be
Remove USB. 260 None [supply type] of Lexmark,
Clear disk space. 260 Disc should be
See User's Manual [33.xy] 266 No analogue telephone line
replace 267 Parallel port [x]
formatted to use in this device 260 Disk full 62 260 Disc is not
disabled [56] 267 Plate [name of modified type]
Connected to the modem, fax is disabled. 266 Memory full [2] 266 Memories vol: can't fax
[printing paper] in [paper source] 263 Place [adapted string]
supported 273 Serial port [x] disabled
printing 266 The device is in the safe
[paper print mode] in multifunctional input 264 Place [name modified
[56] 271 Close tailgate 259 Close the tailgate of the
mode. Some print options may be disabled or deliver unexpected results. 272 Incompatible tray [x]]] 262 Valve automatic input of
paper type] [paper print mode] in multifunctional input 264 Place [paper format]
finisher 259 Close valve of flatbed and
place originals when restarting task [2yy.xx] 259 Close front valve 259 SMTP server is not set.
[printing position paper] in [paper source] 264 Place [paper format]
scanner is open 270 Fax station name is not
The first step is to reduce the risk of infection. Consult the system administrator. 261 Unsupported option in slot
[paperprinting position] in multifunctional input 265 Place [type of paper]
Consult the system administrator. 271 Software error in
[x] [55] 273 Unsupported USB hub,
[paper size] [printing mode of paper] in [paper source] 264 Place [paper type]
default network [54] 272 Software error network [x]
delete hub 260 Number fax station is not
[54] 266 Some interrupted tasks
[paper format] [paper print mode] in multifunctional input 265 Place [string for
The first step is to reduce the risk of infection. Consult the system administrator. 261 Interrupted tasks
have not recovered 271 Default USB port
disabled [56] 272 Supply required to perform the task
Recover? 270 Maintenance kit almost empty
Customized Paper] [printing paper] in [paper source] 263 Replace all originals when you
complete 272 Too many flash options installed
[80.xy] 265 Maintenance kit almost empty,
The task starts again. 268 Place entry tray [x] 262 Place missing or non-
[58] 272 Overcharged
estimated number of remaining pages [x] [80.xy] 265 Maintenance kit replaced
[58] 272 USB port [x] disabled
Responding cartridge back [31.xy] 269 Place stuck origin. back
[80.xy] 269 Wrong paper format. Open
at opn. start task. 269
Image processing unit.

Estimated number of remaining pages is 0 [84.xy] 268 Replace cartridge. Estimated
there is an application error
324 fax and email functions have not occurred
print 302 empty pages 289 light toner wipe or
number of remaining pages is 0 [88.xy] 268 Replace fault
set 312 cannot Embedded Web Server
background too dark 307 irregularities in
open 324 non-reacting printer
image processing unit [31.xy] 268 Replace unsupported
print 296 page •s or images
check 274 scanner does not respond 319 problems solving, printing
not fully printed 290 printer prints plain black
image processing unit [32.xy] 270 Replace unsupported
printing goes slower 285 job takes longer than
pages off 301 shadow images on
cartridge [32.xy] 269 Replace missing cartridge
Expect 286 unexpected page-
print 292 crooked print 301 characters have jagged
image processing unit [31.xy] 269 Remove defective disk [61] 267 Remove paper
ends for 288 error reading flashstation 282 curled paper 295 large printing tasks are not
edges 288 toner lets go 308 toner spots, on print 307 differences in
output tray 268 Weblink server not set.
sorted 284 load cannot link 287 multilingual PDF files
Consult the system administrator. 273 Change [paper source] to
print density 308 vertical stripes 304 white stripes on a
not printed 284 paper runs regularly
[adapted series] places [printing mode] 257 Change [paper source] in
fixed 279 task is printed on
page 306 troubleshooting, display
wrong paper 283 task is printed from
printer display is empty 276 problems to fix, fax
[adapted species], load [printing mode] 257 Change [paper source] in
wrong drawer 283 tasks are not
sent, but cannot be received 316 cannot send faxes or
[paper format], place [print mode] 258 Change [paper source] in
print 285 pages blocked
not reprinted 280 wrong margins on
received 313 faxes may be received, but
[paper type] [paper format], place [print mode] 258 printer security
print 294 wrong characters become
failed to send 317 track view working
information about 227 printer configurations 12 printer options, troubleshooting
printed 283 confidential and other
not 313 received fax has a bad
interrupted tasks are not printed 281 troubleshooting, printing quality
print quality 318 troubleshooting, color quality
memory card 278 Internal Solutions Port 278 internal option not
print is too dark 298 print is light 299 printing quality on transparencies
color transparants seem dark when projected 292 problems solve, copy
detected 276 drawer problems 277 USB/parallel
is only 302 grey background on
interface card 279 printer software install 50 printer driver
documents or photographs
print 293 repeated print failures on
partially copied 311 valve scanner unit closes
Add hardware options 50 troubleshooting
print 297 horizontal interruptions on
not 309, 321 copy function responds



Replace defective image processing unit [31.xy] 268 Replace unsupported image processing units [32.xY] 270 Replace non-supported cartridge [32,xy ] 269 Replace missing image processing device [31,xY ] 269
Preventing VoIP adapter 115, paper failures 76, 244
Display reports 242, discard faxlog 126, Printer hard disk 224 Change [paper source] in [adjusted series] places [print mode] 257 Change [ paper source] to [adapted type], load [print position] 257 Modify [paper resource] to[paper format], place [printing mode] 258 Change [print source] into [paper type] [paper format ], move [print state] 258, clear memory on the solid drive 225, delete non-volatile memory 225, volatile memory 224 wizard for wireless configuration
image processing unit 235 toner cartridge 234 replaced, non-cassette 238 replaced, supplies
noncassette 238 Remove defective disc [61] 267 Remove paper from output tray 268, hard drive from printer 45 Send as
e-mail options 106 scan options 136 send, email with printer control panel 103 send, fax
with address book 123 with quick links 123 send, fax with printer control panel 122 send, Fax at specified time 123 virtual display, Printer control panel
Z silk (duplex)
with the Embedded Web
Server 241 Virtual Display
Copy options 98 search, IP address of printer 22 summer time, set 121 economical handling supplies 218
Web Server 241 volatile memory 224
Pages referenced in this manual — manufacturer, support and downloads.
Owners and our team usually reply within a day — and your question helps the next person too.
Be the first to ask — other owners or our team will answer.