
User manual
Type(s) of equipment:
Models:
210, 230, 235, 295, 410, 430, 438, 630, 635, 695, 830





Conventions
Various precautions:
Precautionary Statements 6

CAUTION – POSSIBLE RISK OF INJURY The power cord shall not be cut, distorted, pinched or squeezed. In addition, no heavy objects may be placed on it. Do not expose the cable to wear or other stress. Do not clamp the power cord between objects such as B. furniture or walls. If one of these hazards is present, there is a danger of fire and electric shock. Check the power cord regularly for these dangers. Unplug the power plug from the socket before checking the power cord.
CAUTION – ELECTRIC SHOCK HAZARD: If you want to access the control board after setting up the printer or install optional hardware or storage media, first turn off the printers and unplug the power cord from the outlet to avoid the risk of an electric shock. If there are other devices connected to the printer, turn them off as well and unplug all cables on the printers.
Precautionary Statement 7

This device and its associated components have been designed and tested for use in compliance with global safety requirements. The safety-relevant functions of the components and options are not always obvious. If parts are used that do not originate from the manufacturer, he assumes no responsibility or liability for this product.
Have all maintenance and repair work not described in the user documentation done exclusively by a customer service representative.
This product uses a printing process in which the print media are heated. This warming can lead to emissions from the printing media. It is therefore important that you read carefully in the user manual the section dealing with selecting suitable print media and follow the guidelines listed therein to prevent harmful emissions.
This product may produce small amounts of ozone in normal operation and can be equipped with a filter that reduces the concentration of ozoan to well below recommended exposure limits. To avoid high ozone concentrations during intensive use, you should place this product in a well-ventilated environment and replace the ozonate and exhaust filters according to product maintenance instructions. If the product maintenance instructions do not contain any information about filters, this product does not have filters that need to be replaced.
KEEP THESE INSTRUCTIONS.
Precautionary Statements 8

Information about the printer 9
Determining Printer Information

Information about the printer 10

When selecting a printer location, make sure there is enough space to open paper trays, covers and flaps as well as install hardware options.

Information about the printer 11
– away from the direct air draft of air conditioners, heaters or fans. – away from direct sunlight and extreme humidity. • Keep the recommended temperatures and avoid any fluctuations in temperature:

You can configure your printer with additional optional 250, 550 or 2100 sheet compartments. For more information, see "Insert Print Media in 250-Sheet or 550-Sleaf compartment" on page 199 or "Install the 2100-Slate compartment" at page 200.

Information about the printer 12



Information about the printer 13
2 Optional 2100-sheet compartment No
4 Optional 550-sheet compartment
The stapler/locker finisher must not be combined with other output options.
In a configuration with two or more optional finishers:
When using optional compartments:
Hardware option Alternative hardware option · 3 Rolling stock No

Information about the printer 14

1 Power cord socket Connect the printer to an electric outlet.
2 USB printer port Connect the printer to a computer.
3 Ethernet port to connect the printer to a network
4 USB port Connect a keyboard or compatible option.
Component description

Using the control panel 15
Printer Lexmark B2865, MS725, MS821, MS823 and MS825

4 Number block Enter numbers or symbols into an input field.
5 Power Switch Turn the printer on or off.
6 Re-key Move the cursor back and delete a character in an input field.
Stop the current task.
8 Check the printer status.
9 Return button return to the previous screen.
10 Home button Return to the home screen.
Designation: · 2 Select (button) · 7 Stop or break button

Using the control panel 16


3 Number block Enter numbers or symbols into an input field.
4 Power Switch Turn the printer on or off.

The printer is switched off or in sleep mode.
Blue The printer is ready or processing data.
Red The printer is waiting for an action from the user.
The printer is out, ready or processes data.

Setting up and using the Start Screen Applications 17

2 Order queue View all current print jobs.
3 Change language change the language on display.
4 Settings Access to the printer menus.
5 Savings settings Manage the energy consumption, noise and toner and paper usage settings.
6 Stop jobs display print jobs in the printer's memory.
7 USB drive to print photos and documents from a flash drive.
Symbol description

Setting up and using the start screen applications 18
8 Manage a contact list that other applications on the printer can access.
1 Open a web browser and enter the printer’s IP address in the address field.
2 Click on it Settlements > Equipment > Symbols on Start Screen.
3 Select the icons that you want to display on the Home screen.
4 Apply the changes.
Before using the application, perform the following steps:
1 In the appropriate section for screensavers and slideshow, you can add, edit or delete images.
2 Apply the changes.
1 Touch on the home screen Change background image.
2 Select an image to use.
3 Apply the changes.
Symbol description

Setting up and using the Start Screen Applications 19
1 Connect a flash drive to the USB port.
2 Touch on the home screen Slideshow.
The images are now listed in alphabetical order.
1 Touch on the home screen Savings settings.
2 Configure the Eco mode or plan for energy modes.
3 Apply the changes.
We recommend that you log in to the printer before creating a profile. For more information about how to activate the login, see Embedded Web Server - Security Admin Guide.
1 Touch on the home screen Cloud Connector.
2 Select a cloud service provider.
3 Touch them Creating a profile or .
4 Enter a unique profile name.
5 If applicable, please provide: a PIN.
6 Touch them Create, and then write down the authorization code.
7 Open a web browser and enter the following: http://lexmark.cloud-connect.co.
8 Click on it Further, and agree to the Terms of Use.
9 Enter the authorization code, and then click on Connecting.
10 Sign in for your account with your cloud service provider.
To access the application, you may need administrator rights.
1 Open a web browser and enter the printer’s IP address in the address field.
11 Granting of permissions

Setting up and using the Start Screen Applications 20
2 Click on it Apps > Equipment quotas > Configuration.
3 In the section "User Accounts" add a user or Edit existing users and then set user quotas.
4 Apply the changes.
To access the application, you may need administrator rights.
1 Open a web browser and enter the printer’s IP address in the address field.
2 Click on it Apps > QR code generator > Configuration.
4 Apply the changes.
1 Tap on the home screen Customer support.
2 Print information or send it by email.

Setting up and using the start screen applications 21
Use bookmarks to print commonly used documents stored on servers or the Internet.
1 Open a web browser and enter the printer’s IP address in the address field.
2 Click on it Bookmarking device > Add bookmarks, and enter a unique name for the bookmark.
To restrict access to the bookmark, enter a PIN.
4 Click on it Storage.
1 Open a web browser and enter the printer’s IP address in the address field.

Setting up and using the start screen applications 22
2 Click on it Bookmarking device > Adding folders Then, enter a unique name for the folder.
3 Click on it Storage.
1 Open a web browser and enter the printer’s IP address in the address field.
2 Click on it Address book.
3 Select from the "Contacts" section, Add contact.
4 If applicable, provide a method for logging in and allow the application to access it.
5 Apply the changes.
1 Open a web browser and enter the printer’s IP address in the address field.
2 Click on it Address book.

Setting up and using the start screen applications 23
3 Select the "Contact Groups" section and add a group name.
4 Apply the changes.
1 Open a web browser and enter the printer’s IP address in the address field.
2 Click on it Address book.
4 Apply the changes.
1 Open a web browser and enter the printer’s IP address in the address field.
2 Click on it Address book.

Setting up and using the accessibility functions 24
1 Hold the button 5 Press until a voice message is heard.
2 Select OK.
1 Hold the button 5 Press until a voice message is heard.
2 Press Tabto navigate the image focus cursor to the OK button, and then press Enter.
Double-Tap an option or select an item on the screen.
Triple type enlarge or shrink text and images.
Swipe right or down to the next element on screen.
Swipe left or up to switch to the previous item on screen.
Pan access to parts of the zoomed image that the screen otherwise does not display.
Swipe up and then left to quit an application and return back to home screen.
Gesture function

Setting up and using the accessibility functions 25
Swipe down and then left
Move up and then down
Repeat a spoken command.
1 Hold the button on the control panel 5 Press until a voice message is heard.
2 Choose the Magnification mode Off.
3 Select OK.
For more information about navigation on an enlarged screen, see "Navigating the screen with gestures" on page 24.
1 On the Home screen, press on the option Settlements > Equipment > Access > Speaking speed.
2 Select the speaking speed.
Perform one or more of the following methods:
1 On the Home screen, press on the option Settlements > Equipment > Access > Passwords/PINs.
2 Activate the setting.
Gesture function

Insertion of paper and special printing media 26
Setting of paper size and grade
1 Navigate to the control panel:
Settlements > Paper > Subject configuration > Paper size/grade > Select a paper feeder
For printer models without a touchscreen, press to navigate through the settings.
2 Set the paper size and type of paper.
1 Navigate to the control panel:
Settlements > Paper > Media configuration > Universal
For printer models without a touchscreen, press to navigate through the settings.
2 Configure the settings.
1 Pull the tray out.

2 Adjust the guides so that they match the format of the inserted paper.

Insertion of paper and special printing media 27

3 Before inserting, bend the paper in both directions, fan it up and level out the edges.

4 Place the stack of paper with its side to be printed on upwards, and subsequently make sure that the lateral guides are in close contact with the paper.


Insertion of paper and special printing media 28

Without an optional staple finisher with an optional stitching clamp finisher




Single-sided pressure Two-side pressure



Insertion of paper and special printing media 29

5 Push the tray into the printer.
6 Set the paper size and type of paper on the control panel according to the inserted paper.
1 Pull the tray out.
2 Adjust the guides.
a Raise the width guide and slide it into position for A5 format.


Insertion of paper and special printing media 30
b Press the length guide together, and slide into position for A5 format until it
audibly engaged.

c Take the A5 length guide out of the bracket.

d Place the guide in the intended shot and press it until it is heard
latched.


Insertion of paper and special printing media 31
a Raise the width guide and slide it into the correct position for what is to be inserted
paper format.

b If the A5 length guide is still attached, remove it. If the A5 track is not
Continue with step d on page 32.

c Insert the A5 length guide into its holder.


Insertion of paper and special printing media 32
d Press the length guide together, and slide the guide into the correct position for
the paper format to be inserted.

3 Before inserting, bend the paper in both directions, fan it up and level out the edges.
4 Place the stack of paper with the page to be printed down. • Insert sheets depending on whether an optional staple finisher is installed.
Without an optional staple finisher with an optional stitching clamp finisher


One-sided pressure · Single-side pressure

Insertion of paper and special printing media 33
Without an optional staple finisher with an optional stitching clamp finisher


Single-sided pressure Two-side pressure


5 Push the tray into the printer.

6 Set the paper size and type of paper on the control panel according to the inserted paper.
Two-sided pressure · Two- sided pressure

Insertion of paper and special printing media 34
1 Open the universal feeder.

2 Adjust the guide so that it matches the format of the inserted paper.

3 Before inserting, bend the paper in both directions, fan it up and level out the edges.
4 Place paper with the print side up. • Insert sheets depending on whether an optional staple finisher is installed.
Without an optional staple finisher with an optional stitching clamp finisher


One-sided pressure · Single-side pressure

Insertion of paper and special printing media 35
Without an optional staple finisher with an optional stitching clamp finisher


Single-sided pressure Two-side pressure


5 Set the paper size and type of paper on the control panel according to the inserted paper.
1 Open a web browser and enter the printer’s IP address in the address field.
2 Click on it Settlements > Paper > Subject configuration
3 For the compartments you connect, set the same paper fomat and type of paper.
4 Save the settings.
5 Click on it Settlements > Equipment > Maintenance > Configuration menu > Subject configuration.
6 Set up the function for connecting compartments Cargo.
7 Save the settings.
To release the tray connection, make sure that no trays have the same settings for paper size or type of paper.
Two-sided pressure · Two- sided pressure

Insertion of paper and special printing media 36

Supported paper formats

JIS B5 182 x 257 mm (7,2 x 10,1 Zoll) X
Statement 140 x 216 mm (5,5 x 8,5 inches) X
Legal legal 216 x 356 mm (8.5 x 14 inches)
105 x 148 mm (4.1 x 5.8 inches) to 216 x 356 mm (8.5 x 14 inches).
1 Long edge (LEF) A5 formats are recommended, none short edge (SEF).
2 envelopes with a width above 101.6 mm (4.5 inches) may be able to wrinkle. This type of paper must be tested for acceptability.
Paper support 37


98.4 x 162 mm (3.9 x 6.4 inches) to 176 x 250 mm (6.9 × 9.8 inches).
1 Long edge (LEF) A5 formats are recommended, none short edge (SEF).
2 envelopes with a width above 101.6 mm (4.5 inches) may be able to wrinkle. This type of paper must be tested for acceptability.

A4 210 x 297 mm (8,3 x 11,7 Zoll)
A5 SEF 148 x 210 mm (5.8 x 8.3 inches) X X X
Oficio (Mexico) 216 x 340 mm (8,5 x 13,4 Zoll)
Paper support 38


Letters 216 x 279 mm (8.5 x 11 inches)
Universal 105 x 148 mm (4.1 x 5.8 inches) to 216 x 356 mm (8.5 x 14 inches).
9 Envelope 98 x 225 mm (3.9 x 8.9 inches) X
C5 Envelope 162 x 229 mm (6.4 x 9 inches) X
98.4 x 162 mm (3.9 x 6.4 inches) to 176 x 250 mm (6.9 × 9.8 inches).

1 Print a maximum of 20 pages to prevent foils from sticking together. Print the following pages after three minutes.
Paper support 39


1 Print a maximum of 20 pages to prevent foils from sticking together. Print the following pages after three minutes.

Paper support 40



1 For paper weighing more than 176 g/m2 (47 lb), the horizontal fibre direction is recommended.
2 Pressure sensitive area must first be drawn into the printer
3 For envelopes weighing 105 g/m2, the cotton content is limited to 25 %.
Paper support 41


1 For paper weighing more than 176 g/m2 (47 lb), the horizontal fibre direction is recommended.
2 Pressure sensitive area must first be drawn into the printer
3 For envelopes weighing 105 g/m2, the cotton content is limited to 25 %.

180 g/m² X
Paper support 42

paper grade and weight of deposit extension, or
Stitching stacks of stitches
140–175 g/m² X
75–135 g/m² X
60–105 g/m² X

Printing from a computer
1 In the document you want to print, open the Print dialog box.
2 Adjust the settings as needed.
3 Print the document.
With Mobile Print, you can send documents and images directly to a supported Lexmark device.
1 First open the document, and then send it to Lexmark Mobile Print or share it with Lex mark Mobile Print.
2 Select a printer.
3 Print the document.
Google Cloud PrintTM is a print service that allows you to print on any Google Cloud print-enabled printer.
At the beginning, make sure you are:
1 On your mobile device, open a document or select a document from the File Manager.
2 Tap them
> Printing.
3 Select the bookmark, and tap on it.
The Mopria® Printing Service is a mobile printing solution for mobile devices running AndroidTM version 4.4 or higher. This allows you to print directly on any Mopria certified printer.
Printing 44

1 Launch a compatible application from the home screen of your mobile device.
2 Tap them PrintingAnd select the printer.
3 Send the print job.
AirPrint is a mobile printing solution that allows you to print directly from Apple devices on an airprint certified printer.
1 Launch a compatible application from the home screen of your mobile device.
2 Select the item to print, and then tap on the share icon.
3 Tap them PrintingAnd select a printer.
4 Print the document.
1 Install the flash drive.

2 On the display, touch the document you want to print.
If necessary, configure the pressure settings.
3 Send the print job.
Print 45

To print another document, touch USB drive.

– The printer supports high-speed USB flash drives with full speed standard. – USB flash drives must support the FAT file system (File Allocation Tables).
Print 46 · Documents

1 Navigate to the control panel:
Settlements > Security > Settings for confidential printing.
For printer models without a touchscreen, press to navigate through the settings.
2 Configure the settings.
Max. Invalid PINs Limit the number of invalid PINE inputs.
Expiry date for confidential contracts
Set the expiration period for confidential printing.
Set the expiration period for a repeat print job.
Expiry date for contracts to be reviewed
Set the expiration period so that the printer will print a copy before printing any remaining copies.
Expiry date for reserved printing
Set the time limit for storing print jobs in the printer.
Requirement to hold all orders
Set the printer to stop all printing jobs.
1 Click on an open document File > Printing.
2 Click on it Characteristics, Preset settings, Options or Establishment.
3 Click on it Printing and retention.
4 Select Printing and retention Then, assign a username.
5 Select the print job type (confidential, repeated, reserved or confirmed).
If the print job is confidential, enter a four-digit PIN.
Printing 47 · Function description · Expiry date for print repetition

6 Click on it OK or Printing.
1 Select when the document is open File > Printing Off.
If necessary, click the triangle to display more options.
2 Select the option in the dialog box with print options or in the "Copies & Pages" menu Order routing.
3 Select the print job type (confidential, repeated, reserved or confirmed).
If the print job is confidential, assign a username and four-digit PIN.
4 Click on it OK or Printing.
1 Touch on the home screen Cloud Connector.
2 Select a cloud service provider, and then select a profile.
3 Select a file.
4 Change if necessary. the settings.
5 Tap them Printing.
Printing 48

1 Navigate to the control panel:
Settlements > Reports > Printing > Printing typefaces
For printer models without a touchscreen, press to navigate through the settings.
2 Select a font example.
Navigate to the control panel:
Settlements > Reports > Printing > Printing directory
For printer models without a touchscreen, press to navigate through the settings.
Printing 49

Menu allocation
Error correction • Print pages for the quality test
Printer menus 50

Specifies in which language the text is displayed on the display.
Identify the country or region in which in which the printer has been configured for operation.
[List of countries or regions]
Executing the configuration assistant.
Select a language as the keyboard type.
Select the information to display on the Home screen.
Display text 1 [IP address*] Display text 2 [date/time*] Custom text 1 User-defined text 2
Configure printer date and time.
Current date/time Date & time manually set date format [MM-DDYYY*] Time format [12 hours AM/PM*]Time zone [GMT*]
Configure the settings for Network Time Protocol (NTP).
Network Time Protocol (NTP)
NTP actively activate [A*] NTP server authentication.
Specifies the unit of measurement for paper formats.
U.S.* Metrics
20-100% (100*) Adjust the display brightness.

Access to the flash drive
Allow access to the flash drive.
Enable audio feedback for keystrokes, control panel interactions, paper insert prompts and error notifications.
Adjust the volume for the printer's speakers.
5-300 (60*) Set the inactive time of the printer within seconds, which must pass before the display shows the home screen or the printers automatically log out from a user account.
Connect an external Virtual Network Computing (VNC) client to the remote control panel.
Set the authentication type when accessing the VNC client server.
Set the tell-tale to light up when a printer error occurs.
Specify how often the warning signal will sound when the printer requires user intervention.

Displays the estimated status of consumables.
Show estimates*Do not show estimation
Set the unit by which the printer estimates material usage and triggers user notifications when it is necessary for a user intervention.
Specify how often the warning signal will sound when toner standing in the toner cassette is low.
Configure the notification settings if user intervention is required.
Custom material notifications.
Enter the primary SMTP gateway or hostname of the primary email-shipping SMPT server.
Enter the connection number of the primary SMTP server.
Enter the server IP address or hostname of your secondary or backup SMTP server.
Enter the connection number of your secondary or backup SMTP server.
Set the time before the printer's time limit expires if the SMTP server does not respond.
In the e-mail, provide a reply address.

Send an email via an encrypted link.
Request a trusted certificate when accessing the SMTP server.
Set the authentication type for SMTP server.
No authentication required* Registration/Normal NTLM CRAM‐MD5 Digest–MD5 Kerberos 5
Set whether device-initiated emails require authentication information.
Device-initiated email
No * SMTP data (device) used.
Set whether authentication information is required for user initiated email.
User-initiated email
No SMTP data (device) was used. Use the session user ID and password. Use email address and password* Request users
Enable user login information and group names to connect with the SMTP server.
Notification The Active Directory.

Enter the user ID for connection to SMTP server.
Enter the password for connecting to SMTP server.
Enter the range for Kerberos 5 authentication protocol.
Enter the domain name for the NTLM security protocol.
Deactivate the display of an error message for SMTP setup on the display.
Error "SMTP Server not set up" deactivate
Set the printer to automatically output blank pages or partially printed pages once a jammed page has been removed.
Have the printer continue to process or print jobs automatically after certain printer conditions requiring user intervention have been fixed automatically.
From One* (5 seconds)
Set the printer to restart when an error occurs.
Start again when inactive Always restart* Never restart
Set the number of automatic restarts that the printer can perform.
Set the number of seconds that must pass before the printer performs an automatic restart.
Window for automatic restarts
Display the read-only status of the restart counter.
Automatic restart counters

Reset the automatic restart counter
Autom. Restart counter back.
Set the printer to display a message if there is an error "Paper is too short".
Display error "Paper too short"
Set the printer to slide the entire page into memory before printing it.
Set the printer to reprint jammed pages.
Allow printing with the advertisement turned off.
Print with the display off
Allow display to be switched on when printing (Allow for print with the display off)*
Sets the idle time before the printer switches to energy-efficient mode.
1-120 Min. (15*)
Sets the time period before the printer goes to sleep.
Deactivated 1 hour 2 hours 3 hours 6 hours 1 day 2 days 3 days* 1 week 2 weeks 1 month

Specifies that the printer will go to sleep even if there is an active Ethernet connection.
Connection sleep time lock
Sleep mode Not to change to sleep*
Minimizes the consumption of energy, paper or specialty printing media.
From * Energy energy / paper paper
Plan to activate the energy-saving or sleep mode for the printer.
Info sent to Lexmark
Send printer consumption and printer performance information to Lexmark.
Consumption and page use (anonymous) Device performance (an anonymously) None of the o. a. Information
Anonymous session – only for info* Session information with generic user information
0-5 (0*) Set the time interval in seconds where the device ignores duplicate key input on a connected keyboard.

0.25-5 (1*) Set the original delay time in seconds before a repeat button starts to replay.
0.5-30 (30*) Adjust the number of touches per second for a repeat button.
Allow the user to stay in the same place and reset the display time lock when it expires instead of returning to the home screen.
1-10 (5*) Adjust the headphone volume.
Activate the voice control with headphones connected
Activate voice control when headphones are connected to the printer.
Set the printer to read passwords or personal identification numbers out loud.
Adjust the speech speed for voice control.
Very Slowly Slow Normal* Fast Something faster Quickly Fastest Fastest
Restore the printer's factory specifications.
Restore all settings printeronce. Reset networking inst. Reset App Once. Reset

Configuration menu
Change the USB driver mode of your printer to improve its compatibility with a PC.
Set the USB port to work with full speed and disable its Hi-Speed function.
Set up the printer to recognize the paper inserted into the paper tray.
Set up the printer to connect compartments with the same paper grade and size settings.
Set the printer to message 'Introduction' indicating.
From Only for Unknown Sizes* Always
Provide the page orientation for infeeding paper in A5 format.
K. Edge Long edge*
Set the paper feeder that the user fills when asked to insert paper.
Auto* Universal feed manual
Set the paper feeder that the user fills when asked to insert envelopes.
Auto* Universal feed envelope manually

Set up the printer to provide prompts related to paper or The cover is to be changed.
Ask users to continue using current
Print reports on the printer's menu settings, printing events and event logs.
Menu settings Event log Incident summary Statistics Condition check
Delete the Consumable Print Page Counter or have it display the total number of printed pages.
Delete the history of consumable
Set up the printer to detect and use PPDS data stream.
Set a maximum value for the point size of text under which high-frequency screens are used when printing font data. For example, if you set the value 24, all point sized fonts or less will use high-frequency screens.
Adjust the toner density when printing or copying documents.
Selects the fixing station to be used.
Compress.*
Set the printer to work in silent mode.
Allow access to the menus of the control panel.

Assign space for copy jobs.
Set up the printer for operation in a special mode where it continues to try and offer as many functions as possible despite known problems.
For example, if you selected One and the duplex motor is not operational, the printer will do one-sided printing of documents even when two-sides were ordered.
Delete custom strings for standardized or alternative user-defined messages.
Deletes messages that have been installed remotely from the printer.
Delete all remotely installed messages
Display existing error messages on the display after the printer is inactive on the home screen for a time equivalent to that of the Display Time Lock setting.
Activate the parallel connection.
Activate the optional parallel connection
Activate the Lexmark Embedded Solutions (LES) applications.
View information at the time of last cleanup of printer memory or hard drive.
Last cleaned memory Last cleansed hard disk

Delete all settings and applications that are stored in the printer memory or on disk.
Clean up all information in the permanent storage
All printer and networking sites. Delete All Apps and App-Once. Delete Clean Up All Disk Information
Status/Material Order queue language change address bookmark stopped orders USB app profiles Adjustment Saving settings
Set which icons should be displayed on the Home screen.
Inventory label Displays the printer serial number.
Location of the printer Identifies the printer location. The maximum length is 63 characters.
Contact them. Personalize the printer name. The maximum length is 63 characters.
Export configuration file in USB Exports configuration files to a flash drive.
Compr. Logdat. to USB export. Exports compressed log files to a flash drive.
Indicate whether the paper is to be printed on one or both sides.

Determines which side of the paper (long edge or short edge) is bound when printed on both sides.
Long edge* Short edge
Print blank pages into a print job.
Maintain the order of pages in a print job, especially when printing multiple copies of a print task.
Aus [1,1,1,2,2,2]* Ein [1,2,1,2,1,2]
When printing, insert several empty separators.
No * Between Copies between Orders Between Pages
Determines from which paper feed the separating side is supplied.
Manufacture from materials of any heading
Print multipage images on a sheet of paper.
From* 2 sheets per page 3 leaves per side 4 sheetsper page 6 sheetsPer page 9 sheets Per page 12 sheets/page 16 sheets
Pages per page (arrangement)
When multipage printing, set the position of page images if you use "Pages per Page".
Horizontal* Reverse horizontally vertically
Pages per page (orientation)
When multipage printing, set the orientation of documents when you use "Pages per page".
Pages per page (edge)
Print a frame around each page image when using "Pages per Page".
1-9999 (1*) Specify the number of copies for each print job.

Set the printable area on a sheet of paper.
Normal* Adjust to side Full page
Set the printer language.
Withhold print jobs that use certain consumables so that orders that don’t use the missing cons of materials can be printed.
Detain time lock for order
Specify how many seconds the printer waits for user intervention before orders are stopped due to unavailable resources and then other orders from the print queue are printed.
Specify where all permanent resources (e.g., B. fonts and macros that have been downloaded to the printer.
Set how the printer should handle loaded resources (e.g., B. fonts and macros) when a print job is received for which the available memory is not sufficient.
Sets the order in which confidential and paused print jobs are printed if the "Print Total Order" option has been selected.
Alphabetical * Last First Elder first

Set the resolution for text and images on print output.
300 dpi 600 dpi* 1200 dpi 1200 image quality 2400
For a clearer print image, allow more pixels to be printed in groups for better text and images quality.
From * Writings Horizontal Vertical Both directions
1 to 10 (8*) Determine the brightness or Darkness of text images.
Improves the print output with softer lines with sharper edge.
Adjusts the brightness of the print output.
–6 bis 6 (0*)
0 to 5 (0*) Adjusts the contrast of the print output.
Setting the contrast adjustment for images.
Set the printer to create a log of received printing jobs.
Set how often the printer should create a log file.

Log action at the end of interval
Specify how the printer should react when the interval threshold is exceeded.
Do not * Send current protocol by email Send and delete current protocol on website Set up and deleted current protocol
Specifies the maximum size of the log file before the scanner performs the protocol action "almost full".
Set how the printer should react when your hard drive is almost full.
Do not * Send current protocol by email Send and delete Current protocol by e-mail Send & delete Oldest protocol by Email Send And delete Updated protocol on website Set Up Current log On site and deletion Place oldest protocol on web page Delete Elder protocol on site Put Down and delase Current protocol Delete All except current protocol Deleted all protocols
Specify how the printer should react when disk utilization reaches its maximum value (100 MB).
Do not * Send and delete current protocol by email Send & delete Current protocol by e-mail Put Up Current log on website and Delete Oldest protocol on site Setup and deletion Postal Protocol On Website Delete Current log Delete Elder protocol Delete All except current protocol Delase all protocol Delist
URL to the protocol Specify where the printer should place order billing logs.
Email address for sending protocols Specifies the email address to which the printer sends order billing logs.
Protocol file prefix Specify the desired prefix for the log file name.

Print a test page that contains information about the errors as well as XML labeling errors.
1-30 (2*) Set the minimum stroke width for all orders printed in 1200 dpi.
Scales the page content to the selected paper format.
Specify whether annotations should be printed in the PDF file.
Print a page with the definition of PostScript error.
1–30 (2*) Set the minimum line width.
Deactivate the PostScript SysStart file.
Specifies that the printer waits for further data to be received before cancelling a job.

Select the source that contains the default font selection.
Resident* Flash Data Carrier All
Select a font from the specified font source.
[List of available fonts] (Courier*)
Determine the character set for each typeface name.
[List of available symbol set] (10U PC-8*)
0,08-100 (10*) Specify the division of fixed or uniform fonts.
Set the orientation of text and graphics on the page.
1-255 Set the number of lines of text for each page printed through PCL® data stream.
1-30 (2*) Set the original minimum line width.
Set the width of the logical page for A4 format.
198 mm* 203 mm
Auto WR to ZV
Set the printer to automatically perform a cart return after a line feed control command.

Auto ZV to WR
Set the printer to automatically perform a line feed after a control command for the cart return.
Configure the printer to work with another print driver or custom application that uses other feed and paper tray assignments.
Uni.Infeed assignment Subject [x] Assignment Manual Paper assignments Manual envelope allocation
The following options are available to you:
0-199—Choose a numeric value to assign a customized value to a paper feeder. 200—The printer uses the factory settings for paper feed assignments. 201—The paper feeder ignores the command “Select Paper Feeder”.
Display the factory default values for each paper feeder.
Reset the specialist reversal values to factory specifications.
Set the printer to finish a printing job after it has been idle for the specified time (in seconds).
Set the font for HTML documents.
[List of Fonts] (Times*)
1–400% (100*) Scale HTML documents.
Sets the page orientation for HTML documents.
8-255 mm (19*) Sets the page edge for HTML documents.
Print background information or graphics for HTML documents.

Autom. Adapted
Select the best available paper format and desired orientation for an image.
Inverts black and white images.
Adjust the image optimally to the print area.
Top left anchor Best Adjustment* Center Anchor Height/Adapt width adjust height
Set the orientation of text and graphics on the page.
Portrait* Reverse portrait/Reverse portaint
Set the paper feeder for all print jobs.
Box [x] (1*) Universal paper feed manual envelope manual
Specify the paper size or type of paper that will be inserted into the relevant source.
Box [x] Universal paper feed manual envelope manual

Set the printer to replace one specified paper format with another if the requested paper size is not inserted in any of the paper feeders.
Specify when the printer should pull in the paper inserted into the universal feed.
Universal equipment
Enter the unit of measurement for the paper format "Universal".
Adjusting the portrait width of the paper format "Universal".
3 bis 14,17 Zoll (8,50*) 76-359,91 mm (216*)
Adjusting the portrait height of the paper format "Universal".
3 bis 14,17 Zoll (14*) 76-359,91 mm (356*)
Set the printer to pull in paper over either the short edge or long edge.
Short edge* Long edge

Normal card foil recycled paper labels Vinyl label fine postal paper envelope Letter envelope rough letter sheet Pre-printed Colour Paper Light Paper Heavy Paper Rough/Cotton User variety [x]
Indicate the structure, weight and orientation of the inserted paper.
1-9999 (1*) Specify the copy number.
Enter the paper feed for the print job.
Box [x] (1*) Universal paper feed manual envelope manual
Print multiple copies in a row.
Indicate whether the paper is to be printed on one or both sides.
Determines which side of the paper (long edge or short edge) is bound when printed on both sides.
Long edge* Short edge

Print multipage images on a sheet of paper.
From* [n] pages per page
Pages per page (arrangement)
When multipage printing, set the position of page images if you use "Pages per Page".
Horizontal* Reverse horizontally Inverted vertically
Pages per page (orientation)
When multipage printing, set the orientation of documents when you use "Pages per page".
Pages per page (edge)
Print a frame around each page image when using "Pages per Page".
Set whether to insert empty separators.
From* Between Copies between Orders Between Pages
Determines from which paper feed the separating side is supplied.
Manufacture from materials of any heading
Specify whether blank pages should be printed into a print job.
Indication of the type of network connection.
Network status Displaying the connection status of the printer network.
Displaying the network status on the printer
Display the network status on display.

Speed, duplex Display the speed of the currently active network card.
IPv4 Displaying the IPv4 address.
All IPv6 addresses View all IPv6 addresses.
Resetting the Print Server Reset all active network connections on the printer.
Set the time period before the printer cancels a network printing job.
From On (90 seconds)
Printing a cover page.
Installation with mobile app Configure the Wi-Fi connection with Lexmark Mobile Assistant.
Configure the Wi-Fi connection via the control panel.
Select network Add Wi-Fi network
Deactivated* WEP WPA2/WPA - Personal WPA2 - Personnel 802.1x - RADIUS
Wid‑Fi Protected Setup
Set up a Wi-Fi network and enable Network Security.
Start the keystroke method PIN-Method

Set the network mode.
Activate Wi-Fi Direct compatible devices to connect them directly with the printer.
Specify the default setting for the Wi-Fi network.
802.11b/g/n (2.4 GHz)* 80211a/b/ g/n/ac (2.4 GHz/5 GHz)
Select Security Mode to connect the printer with Wi-Fi devices.
Deactivated* WEP WPA2/WPA personnel WPA2-Person 802.1x - RADIUS
Set the Wireless Encryption Protocol (WEP) type of printer.
Determine WFP keys Set a WEP password for a secure Wi-Fi connection.
Enable Wi-Fi security using the Wi-FI Protected Access (WPA).
Setting pre-shared keys Set the password for a secure Wi-Fi connection.
Enable Wi-Fi security using WPA2.
802.1x encryption mode WPA+ WPA2*
Enable Wi-Fi security with the default 802.1x option.
Activate the Dynamic Host Configuration Protocol (DHCP) and configure the static IP address.
Setting up a* from Static IP address

Activate and configure the IPv6 settings in the printer.
Activate a* from DHCPv6
An off* stateless address autoconfiguration
An IPv6 address manually assigned from DNS server address Manually allocated to IPv8 router address prefix All IPv7 addresses All IPvi2 router
Displays the network addresses.
Configure the printer to automatically switch to PCL emulation regardless of the standard language used by the printers if a printing job requires it.
Configure the printer to automatically switch to PS emulation regardless of the default language of the printers if a printing job requires it.
Temporarily saves print jobs on the hard drive of the printer before printing orders.
Configures the printer for processing binary Macintosh PostScript printing jobs.

Network speed Have the speed of an active Wi-Fi adapter displayed.
Dynamic Host Configuration Protocol (DHCP).
Enter the static IP address of the printer.
Activates IPv6 in the printer.
Activates DHCPv6 in the printer.
Using this option, set the network adapter to accept the automatic IPv6 address configuration entries provided by a router.
Enter the DNS server address.
Assign the IPv6 address.
Assign the IPv6 address.
Enter the address code.
View all IPv6 addresses.
Allow all IPv6 router addresses to be displayed.
Have the printer's Media Access Control (MAC) addresses displayed: The Locally Administered Address, LAA and Universally Administrated Address (UAA).

Configure the printer to automatically switch to PCL emulation regardless of the standard language used by the printers if a printing job requires it.
Configure the printer to automatically switch to PS emulation regardless of the default language of the printers if a printing job requires it.
Temporarily saves print jobs on the hard drive of the printer before printing orders.
Configures the printer for processing binary Macintosh PostScript printing jobs.
Reduce power consumption if the printer does not receive data from the Ethernet network.
Setting up hostnames Set the current TCP/IP hostname.
Domain axes Set the domain name.
Allow NTP server to be updated by DHCP/BOOTP
Allow DHCP/BOOTP customers to update the printer’s NTP settings.
Configuration-free name Enter a service name for the Zeroconf network.

Automatically assign an IP address.
DNS server address Enter the server address of the current domain name system (DNS).
Replacement DNS address Specify the backup of DNS server addresses.
Domain search sequence Enter a list of domain names to find the printer and its resources that are in different domains on the network.
Update the dynamic DNS settings.
300-31536000 (3600*) Specify the current DDNS settings.
5‑254 (254*)
300‑31536000 (604800*)
Update the multicast DNS settings.
WINS address Enter a server address for the Windows Internet Name Service (WINS).
Have the BOOTP assign a printer IP address.
Limited server list Enter an IP address for the TCP connections.
Options for the restricted server list
Set how the IP addresses in the list can access the printer function.
Lock all connections* Only Print lock only Print and HTTP block
256-1500 (1500*) Set a Maximum Transmission Unit (MTU) parameter for TCP connections.
1-65535 (9100*) Enter a RAW port number for printers on a network.

Outbound traffic – maximum speed
Activate the maximum transfer rate of the printer.
Activate the SSLv2 protocol.
Activate the SSLv3 protocol.
Activate TLSv1.0
Activate the TLSv1.0 protocol.
Activate TLSv1.1
Activate the TLSv1.1 protocol.
SSL digit list Set the encryption algorithms that you want to use for SSL or TLS connections.
SNMP versions 1 and 2c
Configure versions 1 and 2c of the Simple Network Management Protocol (SNMP) for installing printer drivers and applications.
Allow from on* SNMP setting
Activate from an AÜP-MIB

Configure version 3 of the SNMP to install and update printer security.
Set from One* login information with read/write protected
Username Password Set login information with read access
No authentication, no data protection authentication and no privacy authentication*
Activate the IP Security Protocol (IPSec).
Set up the IPSec basic configuration.
Set the IPSec encryption.
modp2048 (14)* modp3072 (15) modp4096 (16) modp6144 (17)

Specify the encryption and authentication methods to establish a secure connection.
Duration IKE SA (hours)
Set the waiting time until a new authentication key is generated.
1 2 4 8 24*
Duration IPSec SA (hours)
1 2 4 8* 24
IPSec Device Certificate Provide an IPSec certificate.
Intermediate common key authenticated links
Configure the authenticated connections of the printer.
Certificate-Authenticated Connections
Allow the printer to connect to networks that require authentication before access.

0-65535 seconds (90*) Set an automatic shutdown value so that the LPD program does not wait for unlimited time on hanging or invalid print jobs.
Print out a cover page for all LPD print jobs.
Print a following page for all LPD print jobs.
Activate "Wagon Return Conversion".
Access the embedded web server to monitor and manage the printer.
Configure the settings for HyperText Transfer Protocol Secure (HTTPS) protocol.
Set the printer to use HTTPS connections.
Send emails with FTP.
Local domains Enter domain names for HTTP and FTP servers.

IP address - HTTP proxy Configure the HTTP and FTP server settings.
1-299 (30*) Set the time period before the server stops connection.
Set the number of dial-up attempts on the HTTP/FTP server.
Print with ThinPrint.
4000-4999 (4000*) Set the port number for ThinPrint server.
Bandwidth (bit/second)
100-1000000 (0*) Set the speed at which data is transferred in a ThinPrint environment.
0-64000 (0*) Set the packet size for data transmission.
Configures the printer to switch to PCL emulation regardless of the standard language of the printers when a printing job received via USB port requires it.

Configures the printer to switch to PS emulation regardless of the standard language of the printers when a printing job received via USB port requires it.
Temporarily saves print jobs on the hard drive of the printer before printing orders.
Configures the printer for processing binary Macintosh PostScript printing jobs.
Activate standard USB port.
Register the printer on Google Cloud Print Server.
Print directly from your Google account.
Google Cloud Print Activation
Allow the registered user and other users on the same subnet to locally send print jobs to the printer.
Check the authenticity of your peer certificate for a connection to your Google account.

Set the printer to process PDF files as an image so that it will print faster.
Always print as a picture
SSID Enter the service set identifier (SSID) of the Wi‐Fi network.
Setting pre-shared keys For the pre-shared key, set authentication and validation of users over a Wi-Fi connection.
PSK a. Installations NB
Display the pre-shared key on a network configuration page.
IP address of the group owner Enter the IP address of the group owner.
Pressing button requirements autom. Best.
Accept requests to automatically connect to the network.
Permissions are used.
Control access to the printer functions.
Edit Address Bookbook Create Profiles Manage bookmark printing from flash drive access to. Print jobs User profiles Cancel orders on device language change Internet printing protocol (IPP) S/W print

Control access to printer menus.
Menu "Security" Menu “Network/connections” Menu menu "Paper" Menus "Reports" Menues "Function configuration" Menum "Consumption material" Menim Option Card SE-Menum Menu
Control access to the printer’s management options.
Remote management Firmware updates Configuration of the applications Operator console lock All import/export settings Delete from operation
Control access to the printer applications.
New apps slideshow background image change Bildsch.sch. Energy-saving settings
Groups/Rights.
Control the access of groups or users to printer functions, applications and security settings.
Access controls import.
Function access Management menus Device management apps All users
Access controls import.
Function access Management menus Device management Apps Admin

Create local accounts to manage access to the printer functions.
Username/password username password PIN
Accounts with Ben.name/Password
Set the default login method to access the control panel.
Username/password username password PIN
Set the default login method for accessing the browser.
Username/password username password PIN
Schedule access to the USB port.
Record the events in security monitoring log and remote syslog.

Send monitoring protocols to a remote server.
Remote Syslog Server Enter the remote syslog server.
1-65535 (514*) Enter the remote syslog port.
Specify a syslog method for transmitting logged events to a remote server.
Enter a setup code that the printer uses when sending logged events to a remote server.
0 – Kernel messages 1 – User level 2 notifications 3 – Mail system 3 – System daemons 4 – Security/authorisation messages 5 – Messages generated internally by syslogs 6 – Line Printer subsystem 7 – Network messaging subsystem 8 – UUCP subsystem 9 – Time daemon 10 – Security / Authorisation message 11 – FTP daemo 12 – NTP subsystem 13 – Protocol monitoring 14 – Clocking 15 – Times daem 16 – Local use 0 (local0) 17 – Local usage 1 (locally1) 18 – Local uses 2 (loca) 20 – Local Use 4 (locAL4) 21 – Localuse 5 (locat5) 22 – Local utilisation 6 (locals6) 23 – Local used 7 (locale7)
Severity of events to be recorded
Specify the shutdown priority level for logging messages and events.

Remote Syslog n. Prot. Events
Send all events, regardless of severity, to the remote server.
Administrator e-mail address Send an email notification of logged events to the administrator.
Send an email notification to the administrator when a log entry is deleted.
Send an email notification to the administrator when the log is full and starts overwriting the oldest entries.
Behaviour if full protocol
Fix the log memory issues if the storage allocated to the protocol is full.
Overwrite Oldest Entries* Send and Delete Log by Email
E‑Mail warning at % full
Send an email notification to the administrator when the memory allocated for the protocol is full.
% full – Warning level
Send an email notification to the administrator when a log entry is exported.
Send an email notification to the administrator when Enable monitoring is set.
Set how the log file closes the end of each line.
ZV (\n)* WR (\r)WRZV (&r\n).
Attach a digital signature to each exported log file.
Delete the protocol Delete all monitoring protocols.
Export the security protocol to a flash drive.
Syslog (RFC 5424) SysLog (RFc 3164) CSV

Notification document
1-10 (3*) Set the number of failed login attempts before blocking the user.
1-60 min. (5*) Set the time period between failed login attempts before the user is locked.
1-60 min. (5*) Set the duration of the block.
1-120 min. (10*) Set the delay for remote login before automatically logging out of the user.
Max. Invalid PINs
Expiry date for confidential contracts
Set the expiration period for confidential printing.
1 hour 4 hours 24 hours 1 week
Set the expiration period for a print job that you want to repeat.
1 hour 4 hours 24 hours 1 week
Expiry date for contracts to be reviewed
Set the expiration period so that the printer will print a copy for the user to check quality before printing any remaining copies.
1 hour 4 hours 24 hours 1 week

Expiry date for reserved printing
Set the time limit for storing print jobs that can only be printed later.
1 hour 4 hours 24 hours 1 week
Requirement to hold all orders
Set the printer to stop all printing jobs.
Set the printer to print other documents with the same name without overwriting printing jobs.
In onboard memory sp.
Delete all files in the printer memory.
Search the different servers in the domain for the logged-in user account.
Enable the verification of LDAP certificates.
Determine whether disk encryption is enabled.

Prevent the loss of confidential data in case that the printer or its hard drive should be stolen once.
Activate AirPrint printing.
Show all functions protected by Function Access Control (FAC), regardless of the user’s security credential.
Ensure that the user must log in before printing.
Set the default application for print permission.
Set the behavior of the security hardware jumper.
Enable guest access* No impact
0-32 (0*) Enter the minimum number of characters allowed for a password.

Menu settings page Print a report that describes the print settings, settings and configurations
contains.
Device information Print a report that contains information about the printer.
Equipment statistics Print a report that contains information about the use of the printer and consumable status.
Profile list Print a list of profiles stored in the printer.
Stock report Print a report with inventory information such as the printer serial number and model name.
printing patterns and font information available in any printer language.
Printing directory Print the resources stored on flash drive or printer hard disk
are.
Print a page showing the printer options and supported solutions.
Print a page that shows the configured network and Wi-Fi settings on the printer.

Print all instructions Prints all instructions
Printing media instructions Contains information about insertion of paper and specialty print media
Print Quality Question Guidance Contains information to resolve print quality issues
Instructions for setting the black and white quality
Contains information about print quality settings for black and white jobs.
Information Guide Contains additional sources of information about the printer
Connection Guide Contains information about connecting the printer as a local (USB) or network printer
Implementation instructions Contains information about moving, finding or transporting the printer
Consumable instructions Provides information on ordering accessories
Test pages for print quality Print test pages to identify and fix print quality defects.
Navigate to the control panel:
Settlements > Reports > Menu settings page
For printer models without a touchscreen, press to navigate through the settings.
Printer menus 95 · Menu Entry Description · Menu Entry Description

securing the printer 96
The printer has a safety lock function. The printer can be secured at its location with a common security lock suitable for laptops (place of attachment see figure).

To delete volatile memory or cached data in your printer, turn the printer off.
To delete non-volatile memory or individual settings, device and network settings and security settings as well as embedded solutions, do the following:
1 Navigate to the control panel:
Settlements > Equipment > Maintenance > Unloading from operation > Clean up all information in the permanent storage
For printer models without a touchscreen, press to navigate through the settings.
2 Select depending on the printer model DELETE or Continuation Off.
3 Follow the instructions on display.
1 Navigate to the control panel:
Settlements > Equipment > Maintenance > Unloading from operation > Clean up all disk information
For printer models without a touchscreen, press to navigate through the settings.
2 Select depending on the printer model DELETE or Continuation Off.
3 Follow the instructions on display.

securing the printer 97
This process deletes the entire content of the hard drive. If necessary, back up important data from the printer before you start encrypting it.
1 Navigate to the control panel:
Settlements > Security > Data carrier encryption > Starting with encryption
For printer models without a touchscreen, press to navigate through the settings.
2 Follow the instructions on display.
1 Navigate to the control panel:
Settlements > Equipment > Restore default settings
For printer models without a touchscreen, press to navigate through the settings.
2 In the "Restore Settings" menu, select the settings you want to restore.
3 Select RESTORE Off.
4 Follow the instructions on display.
The printer uses a standard random access memory (RAM) to temporarily store user data for simple printing and copy jobs.
The printer can use two types of non-volatile memory: EEPROM and NAND
(flash memory). Both types are used to store the operating system, printer settings, network information, scanner and bookmark settings and embedded solutions.
Hard disk space Some printers may have a hard drive installed. The printer hard disk is designed for printer-specific functions. The hard drive allows the printer to retain cached user data from complex printing jobs as well as form and font data.
Memory type Description

securing the printer 98
In the following circumstances, the contents of the installed printer memory should be deleted:

Maintenance of the printer 99
1 Navigate to the control panel:
Settlements > Equipment > Preset settings > Audiofeedback
2 Adjust the volume.
1 Navigate to the control panel:
Settlements > Equipment > Access
2 Adjust the headphone volume.

Maintenance of the printer 100
1 Navigate from the home screen to:
Settlements > Network/connections > Wireless
For printer models without a touchscreen, press to navigate through the settings.
2 Select Installation on DruckerbedienfeldThen follow the instructions on display.
1 Depending on your mobile device, download the Lexmark Mobile Assistant application from either Google Play Store or online app store.
2 Navigate from the control panel to:
Settlements > Network/connections > Wireless > Installation with mobile app > Continue to the printer ID
For printer models without a touchscreen, press to navigate through the settings.
3 Start the application from your mobile device and accept the terms of use.
4 Granting of authorisations
5 Tap them Starting the WLAN installationAnd select the printer.
6 Select a Wi-Fi network and enter your login information.
7 Tap them Completing the WLAN device.
At the beginning, make sure you are:

Maintenance of the printer 101
1 Navigate to the control panel:
Settlements > Network/connections > Wireless > Wid‑Fi Protected Setup > Start the keystroke method
2 Follow the instructions on display.
1 Navigate to the control panel:
Settlements > Network/connections > Wireless > Wid‑Fi Protected Setup > Starting the PIN method
2 Copy the eight-digit WPS PIN.
3 Open a web browser and enter the IP address of your access point in the address field.
4 Go to the WPS settings. More information can be found in the manual for the access point.
5 Enter the eight-digit PIN and save the change.
1 Switch to the printer control panel:
Settlements > Network/connections > Network overview > Active adapter > Standard network connection
For printer models without a touchscreen, press to navigate through the settings.
2 Follow the instructions on display.

Maintenance of the printer 102
1 Open the printer folder.
2 Open the printer properties in the context menu of the printers with the new ISP.
3 Configure the port from the list.
4 Update the IP address.
5 Apply the changes.
1 In the System Settings in Apple's menu, navigate to the printer list and select + > IP.
2 Enter the IP address in the address field.
3 Apply the changes.
1 Turn off the printer and unplug the power cord from the socket.
2 Remove the paper from the standard filing and universal feeder.
3 Remove dust, lint and paper pieces on the printer with a soft brush or vacuum cleaner.
4 Wipe the outside of the printer with a damp, soft, floss-free cloth.

Maintenance of the printer 103
5 Connect the power cord to the socket and turn on the printer.
In the United States, you can find information about authorized Lexmark consumable and parts dealers in your area at 1-800-539-6275. Information for other countries or regions can be found under www.lexmark.com Or, contact the dealer from whom you purchased the printer.
1 Navigate to the control panel:
Settlements > Reports > Equipment > Equipment statistics
For printer models without a touchscreen, press to navigate through the settings.
2 In the "Materials Info" section of printed pages, check for part and consumable status.
Optimal operation of your Lexmark printer can only be guaranteed with original parts and consumable materials from Lex mark. The use of consumables or third-party parts could affect the performance, reliability or lifetime of the printer and its image components. In addition, the guarantee cover is affected. Damage caused by the use of consumable materials or third party parts will not be covered by the warranty. All lifetime indicators are designed to use Lexmark consumables and parts. Using consumables or third-party parts can lead to unpredictable results. If image components are used longer than intended, the Lexmark printer or corresponding components can be damaged as a result.

Maintenance of the printer 104

1 Available only for contract-bound printers. For more information, contact your Lexmark customer service representative or system administrator.
2 Only supported by Lexmark printer models MS725, MS823, MS 825 and MS826.


Maintenance of the printer 105


1 Only supported by Lexmark printer models MS821 and MS822.
3 Only supported by Lexmark printer models MS725, MS823, MS 825 and MS826.
Very little coverage over a longer period of time can cause parts of the exposure unit to fail before the toner is used up.

*This exposure unit is only available for contract-based printers. You can obtain more information from your Lexmark representative or system administrator.
Ordering a maintenance kit
Open flap A and remove the toner cassette and exposure unit to identify the type of fixation station. The two-digit fixing station type can be found on the front side of the fixing station, e.g. B. 00 or 01.
Parts Description Parts Staple cassette 35S8500

Maintenance of the printer 106
Fixing station maintenance kit type Part number
Fixing station maintenance kit type Part number

Maintenance of the printer 107
1 Open a web browser and enter the printer’s IP address in the address field.
2 Click Settlements > Equipment > Notifications.
3 From the menu "Material" on Custom material notifications Click.
4 Select a notification for each consumable.
5 Apply the changes.
1 Open the door A.


Maintenance of the printer 108
2 Remove the used toner cassette.

3 Take the new toner cassette out of its packaging, and shake it to distribute the toner.

4 Insert the new toner cassette.

5 Close the door.
1 Open the door A.

Maintenance of the printer 109
2 Take out the toner cassette.

3 Remove the used exposure unit.


Maintenance of the printer 110
4 Take the new exposure unit out of its packaging, and shake it to distribute the toner.


5 Remove the packaging material.
6 Install the new exposure unit.


Maintenance of the printer 111
7 Insert the toner cassette.
8 Close the door.
1 Open the C flap.


Maintenance of the printer 112
2 Unlock the fixation station.

3 Remove the used fixation station.

4 Take the new fixation station out of the packaging.
5 Install the new fixation station so that it latches audibly.


Maintenance of the printer 113
6 Lock the fixing station.

7 Close the door.
1 Remove the standard shelf cover.

2 Open the C flap.

Maintenance of the printer 114
3 Unlock the Hot Roll fixer.

4 Remove the used hot roll fixer.

5 Take the new Hot Roll fixer out of its packaging.

Maintenance of the printer 115
6 Insert the new Hot Roll fixer so that it latches audibly.

7 Lock the Hot Roll fixer.

8 Close the door.
9 Install the standard shelf cover.

1 Open the door A.

Maintenance of the printer 116
2 Take out the toner cassette.
3 Remove the exposure unit.

4 Remove the used transfer role.

Maintenance of the printer 117

5 Take the new transfer roll out of packaging.
6 Use the new transfer role until it snaps in with one click.


Maintenance of the printer 118
7 Insert the exposure unit.
8 Insert the toner cassette.
9 Close the door.
1 Pull the tray out.

Maintenance of the printer 119
2 Take out the used draw-in roller.

3 Take the new feed roll out of the packaging.
4 Use the new pull-in role.

5 Push the tray into the printer.
1 Open the universal feeder.

Maintenance of the printer 120

2 Take out the used draw-in roller.

3 Take the new feed roll out of the packaging.

Maintenance of the printer 121
4 Use the new pull-in role.

5 Close the universal feeder.

Maintenance of the printer 122
1 Open the door F.

2 Remove the holder of the staple cassette.

3 Take out the empty staple cassette.


Maintenance of the printer 123
4 Insert the new staple cassette.

5 Insert the holder of the staple cassette.
6 Close the door.
1 Depending on the staple cassette to be replaced, open flap F or G.


Maintenance of the printer 124
2 Remove the holder of the staple cassette.
3 Take out the empty staple cassette.
4 Insert the new staple cassette.
5 Insert the holder of the staple cassette.
6 Close the door.

Maintenance of the printer 125
Instructions for transport can be found at http://support.lexmark.com, or contact the responsible customer service.

Maintenance of the printer 126
For printer models without a touchscreen, press to navigate through the settings.
1 Navigate to the control panel:
Settlements > Equipment > Energy management > Savings mode
2 Select a setting.
1 Navigate to the control panel:
Settlements > Equipment > Energy management > Time-barriers > Energy saving mode
2 Select a time period that the printer should wait until energy-saving mode is activated.
1 Navigate to the control panel:
Settlements > Equipment > Energy management > Time-barriers > Sleep mode time-off
2 Select a time period that the printer should wait until activation of sleep mode.
1 Navigate to the control panel:
Settlements > Equipment > Preset settings
For printer models without a touchscreen, press to navigate through the settings.
2 In the menu "Screen Brightness" adjust the setting.

Maintenance of the printer 127
How to return products for recycling to Lexmark:
1 Visit www.lexmark.com/recycle.
2 Select the device you want to dispose of.
Lexmark’s goal is to minimize packaging. Less packaging means that Lexmark printers are transported in the most effective and environmentally friendly way possible, with less packaging to be disposed of. This leads to a reduction in the greenhouse effect, greater energy savings and protection of natural resources. Lexmark also offers recycling of packaging components in some countries or regions. For more information, call www.lexmark.com/recycle Then select your country or region. Information on available packaging recycling programmes is included in the product recycling information.
Wherever there are facilities for recycling corrugated board, the cartons used by Lexmark can be fully recycled. These facilities may not exist in your area.
Wherever facilities are available for recycling foam, foam is used in the packaging used by Lexmark. These facilities may not exist in your area.
If you return a cassette to Lexmark, you can use the packaging in which it was delivered. Lexmark also recycles the packaging.
With the Lexmark Printed Cassette Return Program, you can return used cassades to LexMark for reuse or recycling free of charge. All empty cassettes returned to Lexmark are either reused or dismantled for recycling. The packaging for returning the cassette is also recycled.
To return Lexmark cassette for reuse or recycling, proceed as follows:
1 Visit www.lexmark.com/recycle.
2 Select the device you want to dispose of.

Remove traffic jams 128
Avoiding paper jams
Properly insert paper Wrongly inserting paper




Remove traffic jams 129
Make sure that the paper is properly drafted into the optional mailbox filings.

– If the lengthening of the shelf is shorter than the paper format, then the paper will cause a jam
in the mailbox. For example, if you print on a paper in the Legal format and your filing is set to Letter format renewal, there will be a jam of paper. – If the lengthening of the shelf is longer than the paper format, the edges are bent and
The paper is not stacked properly. For example, if you print on a paper in the Letter format and renewing the filing is set to Legal format, it will not stack the paper properly. • If the paper needs to be returned to the mailbox shelf, place it under the shelf arm and then press it all the way back.


Removing traffic jams 130

Removal of traffic jams 131

1 Finisher or storage of the output option
6 Finisher or rear flap of the option paper shelf
8 Access flap for staple cassette

Removal of traffic jams 132
1 Pull the tray out.

2 Remove the jammed paper.

3 Push the tray into the printer.
1 Open the door A.

Removing traffic jams 133
2 Take out the toner cassette.
3 Remove the exposure unit.


Remove traffic jams 134
4 Pull out the duplex unit.

5 Remove the jammed paper.

6 Insert the duplex unit.
7 Insert the exposure unit.

Remove traffic jams 135
8 Insert the toner cassette.
9 Close the door.
1 Open the C flap.
2 Remove the jammed paper from one of the following areas:

Removal of traffic jams 136



3 Close the door.
Remove the jammed paper.

Remove traffic jams 137

1 Take the paper from the universal feeder.

2 Remove the jammed paper.
3 Before inserting, bend the paper in both directions, fan it up and level out the edges.
4 Re-introduction of paper.


Removing traffic jams 138
1 Open the door K.

2 Remove the jammed paper.

3 Close the door.
1 Open the flap L.

2 Remove the jammed paper.

Removing traffic jams 139

3 Close the door.
1 Open the door N.

2 Remove the jammed paper.


Removing traffic jams 140
3 Close the door.
Remove the jammed paper.

1 Open the H-flap.

2 Remove the jammed paper.

Removing traffic jams 141

3 Close the door.
Remove the jammed paper.

1 Open the door P.

2 Remove the jammed paper.

Removal of traffic jams 142

3 Close the door.
Remove the jammed paper.

1 Open the door F.

Removal of traffic jams 143
2 Remove the holder of the staple cassette.
3 Remove the loose staples.


Remove from traffic jams 144
4 Press the staples against the metal holder.


5 inserting the holder of the staple cassette until it latches audibly.

6 Close the door.

Remove traffic jams 145
1 Open flap F or G, depending on where the staple jam occurred.
2 Remove the holder of the staple cassette.

Removal of traffic jams 146
3 Remove the loose staples.
4 Press the staples against the metal holder.

Removal of traffic jams 147
5 inserting the holder of the staple cassette until it latches audibly.
6 Close the door.

Problems with network connection
Go to step 2.
Turn on the printer.
Check if the printer is on.
Is the printer on?
Go to step 3.
Enter the correct IP address of the printer in the address field.
Make sure the printer’s IP address is correct.
Find the printer’s IP address:
Is the printer's IP address correct?
Step 3 Check if you have a supported browser:
Go to step 4.
Install a supported browser.
Is your browser supported?
Go to step 5.
Contact the system administrator.
The network connection must be active.
Is the network connection active?
Go to step 6.
Check the cable connections.
Make sure that the cable connections to the printer and printing server are properly connected. Further information can be found in the documentation for your printer.
Are the cables permanently connected?

Go to step 7.
Contact the system administrator.
Check if the web proxy servers are disabled.
Are the Webproxyservers deactivated?
The problem has been resolved.
Contact them. Customer service.
Access the embedded web server.
Is access to the Embedded Web Server successful?
Go to step 2.
Wait until the printer has finished the other job.
Check that the printer is not currently performing another printing, copying, scanning or fax job.
Is the printer ready?
Step 2 Check if the flash drive has been connected to the front USB port.
Go to step 3.
Connect the flash drive to the correct port.
Is the flash drive connected to the correct port?
Step 3 Check if the flash drive is supported. For more information, see "Supported Flash Drives and File Types" on page 46.
Go to step 4.
Connect a supported flash drive.
Is the flash drive supported?
The problem has been resolved.
Contact them. Customer service.
a Check if the USB port is activated. Other
For information, see "Activate the USB port" on page 149. b Remove the flash drive and reconnect it.
Does the printer recognize the flash drive?
Navigate to the control panel:
Settlements > Network/connections > USB > Activate USB port
For printer models without a touchscreen, press to navigate through the settings.

1 Print the network configuration page.
Navigate to the control panel:
Settlements > Reports > Network > Network configuration side
For printer models without a touchscreen, press to navigate through the settings.
2 In the first section of the page, check if there is a status called "Connected".
If the status is “Not Connected”, the LAN drop may not be active or the network cable may not plugged in or it might be faulty. Contact the administrator to resolve the issue.
The problem has been resolved.
Go to step 2.
Turn the printer off, wait for about 10 seconds and then turn it back on.
Does the internal option work properly?
Step 2 Print a menu settings page and check that the internal option is listed in the list of installed functions.
Continue with step 4.
Go to step 3.
Is the internal option listed on the menu settings page?
Step 3 Check that the internal option is installed correctly on the controller board.
The problem has been resolved.
Go to step 4.
a Turn off the printer and unplug the power cord
the socket. b Make sure that the internal option is in suitable
connection is inserted on the control circuit board. c Connect the power cord to the socket and turn it on
the printer.
Does the internal option work properly?
Troubleshooting 150 · Action Yes No · Step 1

The problem has been resolved.
Contact them. Customer service.
a Check if the internal option is available in printer driver
is.
Does the internal option work properly?
Try one or more of the following methods:
Try one or more of the following methods:
Try one or more of the following methods:
Error Fixing 151 · Action Yes No · Step 4

Buy a cassette with the region matching your printer area or buy a worldwide valid casing to fix this problem.
Worldwide or undefined region 0
North America (USA, Canada) 1
European Economic Area, Western Europe, Nordic Countries, Switzerland 2
Asia and Pacific 3
Rest of Europe, Middle East and Africa 5
The printer has determined that consumable materials or parts are used which do not come from Lexmark.
Your Lexmark printer works best when using original consumable materials and original parts from LexMark. The use of consumables or third-party parts could affect the performance, reliability or lifetime of the printer and its image components.
All lifetime indicators are designed to use Lexmark consumables and parts. Using consumables or third-party parts can lead to unpredictable results. If image components are used longer than intended, the Lexmark printer or corresponding components can be damaged as a result.

If you accept these risks individually and in total, and with the use of consumable materials or parts, at which if it is not the original for which printer wants to continue, press buttons on the control panel at the same time X and # FIG. X
and hold them for 15 seconds.
If you do not wish to accept these risks, remove consumables or third-party parts from the printer and place them on your computer. use original consumable materials or Lexmark parts. For more information, see "Using Lexmark Original Accessories and Consumption Materials" on page 103.
If the printer is not printing after simultaneously pressing the buttons X and # FIG. X and pressed, and held for 15 seconds, reset the consumable meter.
1 Navigate to the control panel:
Settlements > Equipment > Maintenance > Configuration menu > Consumable and meters
For printer models without a touchscreen, press to navigate through the settings.
2 Select the part or the consumable, which is or Then you want to reset it, and then choose Start.
3 Read the warning message and select Continuation.
4 Press at the same time X and # FIG. X and , and hold it for 15 seconds to delete the message.
Go to step 2.
The problem has been resolved.
a Use an envelope that is in a dry environment
was stored.
Do the envelopes stick to each other when printing?
Error Fixing 153 · Action Yes No · Step 1

Contact them. Customer service.
The problem has been resolved.
a Make sure that the option "Paper grade" to "Envelope"
is set. Navigate to the control panel:
Settlements > Paper > Subject configuration > Paper size/grade
For printer models without a touchscreen, press to navigate through the settings. b Send the print job.
Do the envelopes stick to each other when printing?
The problem has been resolved.
Go to step 2.
a Switch to the printer control panel:
Settlements > Pressure > Layout > Sorting
For printer models without a touchscreen, press to navigate through the settings. b Put "Sort" on One.
c Print the document.
The pages sorted correctly printed?
The problem has been resolved.
Go to step 3.
a In the document you want to print, open the dialog box
Sorting Off. b Print the document.
The pages sorted correctly printed?
The problem has been resolved.
Contact them. Customer service.
a Reduce the number of pages to print. b Print the document.
The pages sorted correctly printed?

The problem has been resolved.
Go to step 2.
a Check if the trays are of the same paper format and
paper grade. b Check that the paper guides are positioned correctly.
c Print the document.
Are the subjects connected correctly?
The problem has been resolved.
Go to step 3.
a Navigate to the control panel:
Settlements > Paper > Subject configuration > Paper size/variety
For printer models without a touchscreen, press to navigate through the settings. b Make sure that the settings "Paper format" and
"Category of paper" correspond to the associated compartment. c Print the document.
Are the subjects connected correctly?
The problem has been resolved.
Contact them. Customer service.
a Make sure that the option "Fachverbindung" is set up
"Automatic" is set. For more information, see "Connecting compartments" on page 35. b Print the document.
Are the subjects connected correctly?
Paper jams are often involved.
Go to step 2.
The problem has been resolved.
a Pull the tray out. b Check that the paper is inserted correctly.
Do paper jams often occur?

Go to step 3.
The problem has been resolved.
a Navigate to the control panel:
Settlements > Paper > Subject configuration > Paper size/variety
For printer models without a touchscreen, press to navigate through the settings. b Set the appropriate paper format and type of paper.
c Print the document.
Do paper jams often occur?
Contact them. Customer service.
The problem has been resolved.
a Insert paper from a new package.
Do paper jams often occur?
a Navigate to the control panel:
The problem has been resolved.
Contact them. Customer service.
Settlements > Equipment > Notifications > Stowage contents-Recreation.
For printer models without a touchscreen, press to navigate through the settings. b Select One or CargoThen apply the changes.
an. c Print the document.
Are the jammed pages reprinted?

Empty or white sides

Printer models without touchscreen to navigate through the settings.
Go to step 2.
The problem has been resolved.
a Check if the printer is Lexmark-owned and
supported toner cassette is used.
Does the printer output blank or white pages?
Error Fixing 157 · Action Yes No · Step 1

Go to step 3.
The problem has been resolved.
a Remove all packaging material from the
Exposure unit.
1 Take out the toner cassette first and then take out the photoconductor.
Does the printer output blank or white pages?
Go to step 5.
Go to step 4.
Check that the transfer role is installed correctly.
Is the transmission role correctly installed?
Go to step 5.
The problem has been resolved.
a Remove the transfer role and put it back in. b Print the document.
Does the printer output blank or white pages?
Contact them. Customer service.
The problem has been resolved.
a Replace the photo conductor. b Print the document.
Does the printer output blank or white pages?


Printer models without touchscreen to navigate through the settings.
Go to step 2.
The problem has been resolved.
a Check if the printer is Lexmark-owned and
supported toner cassette is used.
Is the expression dark?
Go to step 3.
The problem has been resolved.
a Turn off the printer, wait for about 10 seconds
Then turn the printer back on. b Reduce the toner application. Navigate to the control panel:
Settlements > Printing > Quality c Print the document.
Is the expression dark?
Go to step 4.
The problem has been resolved.
a Enter the paper type depending on operating system in the dialog box
"Printing Presets" or "Print".
Is the expression dark?
Step 4 Check if the paper has a textured or rough surface.
Go to step 5.
Continue with step 6.
Do you print on structured or rough paper?
Go to step 6.
The problem has been resolved.
a Replace the structured paper with regular paper. b Print the document.
Is the expression dark?

Go to step 7.
The problem has been resolved.
a Insert paper from a new package.
Is the expression dark?
Go to step 8.
The problem has been resolved.
a Take out the exposure unit and place it
again.
Is the expression dark?
Contact them. Customer service.
The problem has been resolved.
a Replace the photo conductor. b Print the document.
Is the expression dark?

Printer models without touchscreen to navigate through the settings.

Go to step 2.
The problem has been resolved.
a Check if the printer is Lexmark-owned and
supported toner cassette is used.
Are fine lines printed correctly?
Contact them. Customer service.
The problem has been resolved.
a Adjust the print quality settings.
1 Navigate to the control panel:
Settlements > Printing > Quality > Pixel elevation > Font 2 Increase the toner order to 7. Navigate to the control panel:
Settlements > Printing > Quality b Print the document.
Are fine lines printed correctly?

Printer models without touchscreen to navigate through the settings.
Go to step 2.
The problem has been resolved.
a Check if the printer is Lexmark-owned and
supported toner cassette is used.
Is the paper folded or creased?

Go to step 3.
The problem has been resolved.
a Insert paper from a new package.
Is the paper folded or creased?
Contact them. Customer service.
The problem has been resolved.
a Enter the paper type depending on operating system in the dialog box
"Printing Presets" or "Print".
Is the paper folded or creased?

Printer models without touchscreen to navigate through the settings.
Go to step 2.
The problem has been resolved.
a Turn off the printer, wait for 10 seconds and
Then turn the printer back on. b Reduce the toner application.
Navigate to the control panel:
Settlements > Pressure > Quality C Print the document.
Is there a gray background on the printouts?

Go to step 3.
The problem has been resolved.
a Check if the printer is Lexmark-owned and
supported toner cassette is used.
Is there a gray background on the printouts?
Go to step 4.
The problem has been resolved.
a Enter the paper type depending on operating system in the dialog box
"Printing Settings" or "Print".
Is there a gray background on the printouts?

Go to step 5.
The problem has been resolved.
a Remove the exposure unit.
Exposure unit.

Is there a gray background on the printouts?
Contact them. Customer service.
The problem has been resolved.
a Replace the photo conductor. b Print the document.
Is there a gray background on the printouts?


The problem has been resolved.
Go to step 2.
a Slide the paper guides into the one for the inserted paper
intended position. b Print the document.
Are the edges right?
The problem has been resolved.
Contact them. Customer service.
a Enter the paper size depending on operating system in the dialog box
"Printing Settings" or "Print".
Are the edges right?

Printer models without touchscreen to navigate through the settings.

Go to step 2.
The problem has been resolved.
a Check if the printer is Lexmark-owned and
supported toner cassette is used.
Is the expression pale?
Go to step 3.
The problem has been resolved.
a Turn off the printer, wait for about 10 seconds
Then turn the printer back on. b Increase the toner order. Navigate from the control panel to:
Settlements > Pressure > Quality C Print the document.
Is the expression pale?
Go to step 4.
The problem has been resolved.
a Enter the paper type depending on operating system in the dialog box
"Printing Settings" or "Print".
Is the expression pale?
Step 4 Check that the print resolution is set to 600 dpi.
Go to step 5.
The problem has been resolved.
a Navigate from the control panel to:
Settlements > Printing > Quality > Pressure resolution b Print the document.
Is the expression pale?

Go to step 6.
The problem has been resolved.
a Take the toner cassette first, and then take the photoconductor.
out.
Exposure unit. c Shake the exposure unit to re-engage the toner
Then distribute and use them. d Insert the toner cassette. e Turn off the printer, wait for 10 seconds and
Then turn the printer back on. f Print the document.
Is the expression pale?
Go to step 7.
The problem has been resolved.
a If the problem arises after installing a new maintenance kit
If the kit occurs, check that the transfer role included in the Kit is installed.
Is the expression pale?
Step 7 Check the status of the exposure unit. Navigate from the control panel to:
Go to step 8.
Contact them. Customer service.
Is the exposure unit almost consumed?
Contact them. Customer service.
The problem has been resolved.
a Replace the photo conductor. b Print the document.
Is the expression pale?


Printer models without touchscreen to navigate through the settings.
Go to step 2.
The problem has been resolved.
a Check if the printer is Lexmark-owned and
supported toner cassette is used.
Is the expression blotchy?
Go to step 3.
Contact them. Customer service.
Check the printer for leaked toner contamination.
Is the printer free of leaked toner?
Step 3 Check the status of the exposure unit. Navigate to the control panel:
Go to step 4.
Contact them. Customer service.
Is the exposure unit almost consumed?
Contact them. Customer service.
The problem has been resolved.
a Replace the photo conductor. b Print the document.
Is the expression blotchy?


Printer models without touchscreen to navigate through the settings.
Go to step 2.
The problem has been resolved.
a Check if the printer is Lexmark-owned and
supported toner cassette is used.
Is the paper corrugated?
Go to step 3.
The problem has been resolved.
a Bring the guides in the tray for the inserted paper into
The correct position. b Print the document.
Is the paper corrugated?
Go to step 4.
The problem has been resolved.
a Enter paper format and type of paper depending on the operating system
in the "Print Presettings" or "Printing" dialog box.
Is the paper corrugated?
Go to step 5.
The problem has been resolved.
a Take the paper out of the tray and turn it around. b Print the document.
Is the paper corrugated?

Go to step 6.
The problem has been resolved.
a Insert paper from a new package.
Is the paper corrugated?
Contact them. Customer service.
The problem has been resolved.
a Check if the inserted paper is supported.
Is the paper corrugated?

Printer models without touchscreen to navigate through the settings.
Go to step 2.
The problem has been resolved.
a Bring the guides in the tray for the inserted paper into
The correct position. b Print the document.
Is the expression skewed or distorted?
Go to step 3.
The problem has been resolved.
a Check if the inserted paper is supported.
Is the expression skewed or distorted?

Contact them. Customer service.
The problem has been resolved.
a Check the recording wheel in the compartment for damage and
Contaminants and replace them if necessary. b Print the document.
Is the expression skewed or distorted?

Printer models without touchscreen to navigate through the settings.
Go to step 2.
The problem has been resolved.
a Check if the printer is Lexmark-owned and
supported toner cassette is used.
Does the printer print completely black pages?
Go to step 3.
The problem has been resolved.
a Take out the exposure unit and place it
again.
Does the printer print completely black pages?

Go to step 4.
The problem has been resolved.
a Remove the exposure unit.
Exposure unit.
Does the printer print completely black pages?
Step 4 Check the image unit for damage.
Contact them. Customer service.
Go to step 5.
Is the exposure unit undamaged?
Contact them. Customer service.
The problem has been resolved.
a Replace the photo conductor. b Print the document.
Does the printer print completely black pages?


Printer models without touchscreen to navigate through the settings.
Go to step 2.
The problem has been resolved.
a Check if the printer is Lexmark-owned and
supported toner cassette is used.
Are text or pictures cut off?
Go to step 3.
The problem has been resolved.
a Take out the exposure unit and place it
again.
Are text or pictures cut off?

Go to step 4.
The problem has been resolved.
a Remove the exposure unit.
Exposure unit.
Are text or pictures cut off?
Contact them. Customer service.
The problem has been resolved.
a Replace the photo conductor. b Print the document.
Are text or pictures cut off?


For printer models without a touchscreen, press to navigate through the settings.
Go to step 2.
The problem has been resolved.
a Check if the printer is Lexmark-owned and
supported toner cassette is used.
Does the toner rub off easily?
Go to step 3.
The problem has been resolved.
a Enter the paper type depending on operating system in the dialog box
"Printing Settings" or "Print".
Does the toner rub off easily?
Contact them. Customer service.
The problem has been resolved.
a Remove the fixation station and reconnect it. b Print the document.
Does the toner rub off easily?


Printer models without touchscreen to navigate through the settings.
Go to step 2.
The problem has been resolved.
a Check if the printer is Lexmark-owned and
supported toner cassette is used.
Does the expression have horizontal, bright stripes?
Contact them. Customer service.
The problem has been resolved.
a Turn off the printer, wait for about 10 seconds
Then turn the printer back on. b Print the document.
Does the expression have horizontal, bright stripes?

Printer models without touchscreen to navigate through the settings.

a Check if the printer is Lexmark-owned and
Contact them. Customer service.
The problem has been resolved.
supported toner cassette is used.
Does the expression have vertical, bright stripes?

Printer models without touchscreen to navigate through the settings.
Go to step 2.
The problem has been resolved.
a Check if the printer is Lexmark-owned and
supported toner cassette is used.
Does the expression have vertical white lines?
Go to step 3.
The problem has been resolved.
Fix problems with slow printing. For more information, see "Slow Printing" on page 184.
Does the expression have vertical white lines?
Contact them. Customer service.
The problem has been resolved.
a Replace the photo conductor. b Print the document.
Does the expression have vertical white lines?


Printer models without touchscreen to navigate through the settings.
Go to step 2.
The problem has been resolved.
a Check if the printer is Lexmark-owned and
supported toner cassette is used.
Does the expression have vertical, dark stripes?
Go to step 3.
The problem has been resolved.
a Take the toner cassette first, and then take the photoconductor.
out.
c Print the document.
Does the expression have vertical, dark stripes?

Go to step 4.
The problem has been resolved.
a Remove the exposure unit.
Exposure unit.
Does the expression have vertical, dark stripes?
Contact them. Customer service.
The problem has been resolved.
a Check if there is a strong pressure on the right side of the printer.
Predominant light incidence, and move the printer if necessary. b Print the document.
Does the expression have vertical, dark stripes?


Printer models without touchscreen to navigate through the settings.
Go to step 2.
The problem has been resolved.
a Check if the printer is Lexmark-owned and
supported toner cassette is used.
Do vertical, dark lines or stripes appear on the printouts?
Go to step 3.
The problem has been resolved.
a Take out the photo conductor and put it back in.
Do vertical, dark lines or stripes appear on the printouts?
Contact them. Customer service.
The problem has been resolved.
a Replace the photo conductor. b Print the document.
Do vertical, dark lines or stripes appear on the printouts?


Printer models without touchscreen to navigate through the settings.
Go to step 2.
The problem has been resolved.
a Remove the exposure unit.
Exposure unit.
Does the expression have vertical, dark lines and missing images?
Error Resolving 181 · Action Yes No · Step 1

Contact them. Customer service.
The problem has been resolved.
a Check if the printer is Lexmark-owned and
supported toner cassette is used.
Does the expression have vertical, dark lines and missing images?

For printer models without a touchscreen, press to navigate through the settings.
Go to step 2.
Measure the distance, and contact them. Customer service.
Use the Print Quality Testing pages to check if repetitive irregularities occur at any of the following intervals:
Is the distance of repeating irregularities identical to one of the dimensions?
Contact them. Customer service.
The problem has been resolved.
a Replace the photo conductor. b Print the document.
Do the repetitive irregularities occur?

The problem has been resolved.
Go to step 2.
a Check on the operator console whether the documents in the list
the orders suspended are listed.
Are the documents printed?
The problem has been resolved.
Go to step 3.
The print job may contain a formatting error or invalid data.
Are the documents printed?
Step 3 When printing over the Internet, the printer may interpret several order titles as duplicates.
The problem has been resolved.
Go to step 4.
a Open the "Print Settings" dialog box. b In the "Print and Retain" section, select the option
Keeping duplicate documents. c Enter a PIN. d Send the print job again.
a Save and name each printer job
different. b Send the order individually.
Are the documents printed?
The problem has been resolved.
Go to step 5.
a Delete some stopped jobs to printer memory
release. b Send the print job again.
Are the documents printed?
The problem has been resolved.
Contact them. Customer service.
a Upgrade the printer memory. b Send the print job again.
Are the documents printed?

Step 1 Make sure the printer cable is securely connected to the printers and computer, printing servers, options or other networking device.
Go to step 2.
The problem has been resolved.
Does the printer print slowly?
Go to step 3.
The problem has been resolved.
a Make sure the printer is not in savings mode or
silent mode.
Settlements > Equipment > Maintenance > Configuration menu > Equipment operation > Quiet mode
For printer models without a touchscreen, press to navigate through the settings. b Print the document.
Does the printer print slowly?
Go to step 4.
The problem has been resolved.
a Enter the print resolution depending on the operating system in
The "Print Settings" or "Printing" dialog box. b Set the resolution to 600 dpi.
c Print the document.
Does the printer print slowly?
Go to step 5.
The problem has been resolved.
a Navigate from the control panel to:
Settlements > Printing > Quality > Pressure resolution
For printer models without a touchscreen, press to navigate through the settings. b Set the resolution to 600 dpi.
c Print the document.
Does the printer print slowly?

Go to step 6.
The problem has been resolved.
a Enter the paper type depending on operating system in the dialog box
"Printing Settings" or "Print".
Does the printer print slowly?
Go to step 7.
The problem has been resolved.
a Make sure that the printer settings for paper structure
and weight matches the properties of the loaded paper.
Does the printer print slowly?
Step 7 Remove stopped orders.
Go to step 8.
The problem has been resolved.
Does the printer print slowly?
Go to step 9.
The problem has been resolved.
a Make sure the printer is not overheating.
Does the printer print slowly?
Contact them. Customer service.
The problem has been resolved.
a Extend the printer memory. b Print the document.
Does the printer print slowly?

The problem has been resolved.
Go to step 2.
a Select the dialog window in the document to be printed
"Printing" and check if you have selected the correct printer. b Print the document.
Is the document printed?
The problem has been resolved.
Go to step 3.
a Check if the printer is on. b Fix any error messages that appear on the display
will become. c Print the document.
Is the document printed?
The problem has been resolved.
Go to step 4.
a Check if the connections are working and whether the cables
are properly connected to the computer and printer.
Further information can be found in the installation manual included with the printer. b Print the document.
Is the document printed?
The problem has been resolved.
Go to step 5.
a Turn off the printer, wait for about 10 seconds
Then turn the printer back on. b Print the document.
Is the document printed?
The problem has been resolved.
Contact them. Customer service.
a Remove the printer driver and reinstall it. b Print the document.
Is the document printed?

Step 1 Check if the power cable is connected to the source of electricity.
The problem has been resolved.
Go to step 2.
Step 2 Check if the power supply is interrupted by a circuit breaker or another switch.
Turn on the power button or reset the circuit breaker.
Go to step 3.
Is the power supply interrupted by a circuit breaker or another switch?
Go to step 4.
Turn on the printer.
Check if the printer is on.
Is the printer on?
Press the power button to turn on the printer again.
Go to step 5.
Check if the printer is in sleep or energy-saving mode.
Is the printer in sleep or energy-saving mode?
Step 5 Check that the cables connecting the printer and computer are plugged into the correct ports.
Go to step 6.
Plug the cables into the right connections.
Are the cables plugged into the right connections?
Step 6 Turn off the printer, install hardware options and turn it back on afterwards.
The problem has been resolved.
Go to step 7.
For more information, see the installation manual included with the option.
Step 7 Install the correct printer driver.
The problem has been resolved.
Go to step 8.
Step 8 Turn the printer off, wait for about 10 seconds and then turn it back on.
The problem has been resolved.
Contact them. Customer service.

1 Navigate to the control panel:
Settlements > Printing > Quality > Toner deposition
For printer models without a touchscreen, press to navigate through the settings.
2 Adjust the setting.
3 Apply the changes.
Go to step 2.
Insert the right paper size and type of paper.
a Check that you are using the correct paper. b Print the document.
Is the document printed on the correct paper?
The problem has been resolved.
Go to step 3.
a Enter paper format and type of paper depending on the operating system
in the "Print Settings" or "Printing" dialog box.
For printer models without a touchscreen, press to navigate through the settings. b Make sure that the settings are set in the box
paper correspond. c Print the document.
Is the document printed on the correct paper?
The problem has been resolved.
Contact them. Customer service.
a Check if the compartments are connected.
For more information, see "Connecting compartments" on page 35. b Print the document.
Is the document about correct delivery printed?
Before contacting Customer Service, make sure you have the following information:

Go to http://support.lexmark.com For support by email or chat, or search the library for a solution with manuals, support documentation, drivers and other downloads.
Technical customer service over the phone is also available. In the U.S.A. or Canada, contact customer service at 1-800-539-6275. In other countries or regions, you can go to http://support.lexmark.com.
Error Fixing 189

Update and Migrate 190
Hardware
CAUTION – ELECTRIC SHOCK HAZARD: If you want to access the control board after setting up the printer or install optional hardware or storage media, first turn off the printers and unplug the power cord from the outlet to avoid the risk of an electric shock. If other devices are connected to the printer, turn them off too and unplug all cables from the printers.
1 Turn off the printer.
2 Remove the power cord from the socket and subsequently from the printer.
3 Use a flat screwdriver, and open the cover of the control board.

Update and Migrate 191

4 Install all supported internal options. For more information, see the installation manual included with the option.
5 Close the cover.
6 Connect the power cord to the printer and then connect it to a socket.
7 Turn on the printer.
CAUTION – ELECTRIC SHOCK HAZARD: If you want to access the control board after setting up the printer or install optional hardware or storage media, first turn off the printers and unplug the power cord from the outlet to avoid the risk of an electric shock. If other devices are connected to the printer, turn them off too and unplug all cables from the printers.
1 Turn off the printer.
2 Remove the power cord from the socket and subsequently from the printer.
3 Use a flat screwdriver, and open the cover of the control board.

Update and Migrate 192
4 Take the memory card out of its packaging.
5 Insert the memory card so that it latches audibly.

6 Close the cover.
7 Connect the power cord to the printer and then connect it to a socket.
8 Turn on the printer.

Update and Migrate 193
CAUTION – ELECTRIC SHOCK HAZARD: If you want to access the control board after setting up the printer or install optional hardware or storage media, first turn off the printers and unplug the power cord from the outlet to avoid the risk of an electric shock. If other devices are connected to the printer, turn them off too and unplug all cables from the printers.
1 Turn off the printer.
2 Remove the power cord from the socket and subsequently from the printer.
3 Use a flat screwdriver, and open the cover of the control board.
4 Take the option card out of its packaging.
5 Slide the card in.


Update and Migrate 194
6 Close the cover.
7 Connect the power cord to the printer and then connect it to a socket.
8 Turn on the printer.
CAUTION – ELECTRIC SHOCK HAZARD: If you want to access the control board after setting up the printer or install optional hardware or storage media, first turn off the printers and unplug the power cord from the outlet to avoid the risk of an electric shock. If other devices are connected to the printer, turn them off too and unplug all cables from the printers.
1 Turn off the printer.
2 Remove the power cord from the socket and subsequently from the printer.
3 Use a flat screwdriver, and open the cover of the control board.
4 Take the printer hard drive out of the packaging.

Update and Migrate 195
5 Attach the hard drive and connect the disk cable to the control board.

6 Close the cover.
7 Connect the power cord to the printer and then connect it to a socket.
8 Turn on the printer.
CAUTION – ELECTRIC SHOCK HAZARD: If you want to access the control board after setting up the printer or install optional hardware or storage media, first turn off the printers and unplug the power cord from the outlet to avoid the risk of an electric shock. If other devices are connected to the printer, turn them off too and unplug all cables from the printers.
1 Turn off the printer and unplug the power cord from the socket.
2 Use a flat screwdriver, and open the cover of the control board.

Update and Migrate 196
3 Unpack the Internal Solutions Port (ISP) kit.

4 If necessary, remove the printer's hard drive.
2 Holding system 3 Cut-out screws

Update and Migrate 197
5 Then, put the mount into the board until it is audibly engaged.

6 Insert the ISP into the bracket.


Update and Migrate 198
7 If necessary, attach the hard drive to the ISP. a Remove the hard disk holder.

b Install the hard drive on the ISP.


Update and Migrate 199
8 Close the cover.
9 Connect the power cord to the socket and turn on the printer.
CAUTION – ELECTRIC SHOCK HAZARD: If you want to access the control board after setting up the printer or install optional hardware or storage media, first turn off the printers and unplug the power cord from the outlet to avoid the risk of an electric shock. If other devices are connected to the printer, turn them off too and unplug all cables from the printers.
1 Turn off the printer.
2 Remove the power cord from the socket and subsequently from the printer.
3 Take the optional compartment out of packaging and remove all packaging material.
4 Align the printer to the optional tray, and insert the printers with audible click.

5 Connect the power cord to the printer and then connect it to a socket.
6 Turn on the printer.

Update and Migrate 200
Add the tray in the printer driver to make it available for printing jobs. For more information, see "Add available options in the printer driver" on page 216.
CAUTION – ELECTRIC SHOCK HAZARD: If you want to access the control board after setting up the printer or install optional hardware or storage media, first turn off the printers and unplug the power cord from the outlet to avoid the risk of an electric shock. If other devices are connected to the printer, turn them off too and unplug all cables from the printers.
1 Turn off the printer.
2 Remove the power cord from the socket and subsequently from the printer.
3 Take the tray out of packaging and remove all packaging material.
4 Put the tray on the rolling shelf.

5 Align the printer on the tray, and insert the printers with audible click.

Update and Migrate 201

6 Connect the power cord to the printer and then connect it to a socket.
7 Turn on the printer.
Add the tray in the printer driver to make it available for printing jobs. For more information, see "Add available options in the printer driver" on page 216.

Update and Migrate 202
1 Turn off the printer.
2 Remove the power cord from the socket and subsequently from the printer.
3 Take the mailbox out of its packaging.
4 Install the guide bar on the mailbox.
a Put the mailbox on the side.


Update and Migrate 203
b Insert the guide bar fasteners into the mailbox.

c Then move the guide to the right until it is audibly engaged.


Update and Migrate 204
5 Remove the cover on top of the printer.

6 Insert the mailbox into the printer.


Update and Migrate 205
7 Connect the power cord to the printer and then connect it to a socket.
8 Turn on the printer.
Add the mailbox in the printer driver to make it available for printing jobs. For more information, see "Add available options in the printer driver" on page 216.
1 Turn off the printer.
2 Remove the power cord from the socket and subsequently from the printer.
3 Take the shelf extension or high-capacity shelf expansion out of packaging.
4 Install the guide bar on the output extension or high-capacity output extension.
a Put the output extension on the side.


Update and Migrate 206
b Insert the guide strip fasteners in the output extension.


Update and Migrate 207
c Then move the guide to the right until it is audibly engaged.

5 Remove the cover on top of the printer.

Update and Migrate 208
6 Install the output extension on the printer.

In a configuration with two or more hardware options:
7 Connect the power cord to the printer and then connect it to a socket.
8 Turn on the printer.
Add the output extension in the printer driver to make it available for printing jobs. For more information, see "Add available options in the printer driver" on page 216.

Update and Migrate 209
1 Turn off the printer.
2 Remove the power cord from the socket and subsequently from the printer.
3 Take the stapler finisher out of the packaging.
4 Install the guide bar on the stapler finisher.
a Put the stapler finisher on the side.


Update and Migrate 210
b Insert the fastening elements of the guide strip in the stapler finisher.

c Then move the guide to the right until it is audibly engaged.


Update and Migrate 211
5 Remove the cover on top of the printer.
6 Install the stapler finisher on the printer.

For two or more options, the stapler finisher must always be on top.

Update and Migrate 212
7 Connect the power cord to the printer and then connect it to a socket.
8 Turn on the printer.
Add the stapler finisher in the print driver to make it available for printing jobs. For more information, see "Add available options in the printer driver" on page 216.
1 Turn off the printer.
2 Remove the power cord from the socket and subsequently from the printer.
3 Take the stitcher/locker finisher out of your packaging.
4 Attach the guide bar to the stapler/locking finisher.
a Put the stitcher/locker finisher on the side.


Update and Migrate 213
b Insert the guide strip fasteners in the stapler/hole finisher.

c Then move the guide to the right until it is audibly engaged.


Update and Migrate 214
5 Remove the cover on top of the printer.
6 Install the finisher on the printer.

The finisher must not be combined with other options.

Update and Migrate 215
7 Connect the power cord to the printer and then connect it to a socket.
8 Turn on the printer.
Add the finisher in the print driver to make it available for printing jobs. For more information, see "Add available options in the printer driver" on page 216.
With the software CD you can install printer software on the following operating systems:

Update and Migrate 216
2 Run the installer and follow the instructions on your computer screen.
3 Add the printer for Macintosh users.
For Windows users
1 Open the printer folder.
3 Navigate to the "Configuration" tab, and select Update now – ask printers.
4 Apply the changes.
1 Use the System Settings in Apple's menu to navigate your printer, and select Options and consumables.
2 Navigate to the list of hardware options, and then add all installed options.
3 Apply the changes.
You can export your printer’s configuration settings to a text file, which can then be imported to apply the settings on other printers.
1 Open a web browser and enter the printer’s IP address in the address field.

Update and Migrate 217
2 Export or import a configuration file for one or more applications.
a Click on the Embedded Web Server Apps > and the application you are using Want to configure. b Click on it Exporting or Import.
a Click on the Embedded Web Server Exporting configuration or Importing configuration. b Then follow the instructions on screen.
Some applications require a minimum version of the device firmware to function properly.
More information about updating the device firmware can be obtained from your Lexmark merchant.
1 Click on the Embedded Web Server Settlements > Equipment > Firmware Update.
2 Navigate to the required flash file.
3 Apply the changes.

Product information
Product name:
Printer Lexmark B2865dw, Lex mark M5255, LEX mark M 5270, LEx mark MS725dvn; Lex Mark MS821n, Lxmark MS822dn;Lexmark MS822de; L exmark MS 823n, lexmark MS-823dn); LexMark MS825dn
Type of equipment:
Models:
210, 230, 235, 295, 410, 430, 438, 630, 635, 695, 830
The following section does not apply to countries where these provisions are incompatible with the law applicable therein: LEXMARK INTERNATIONAL, INC. PROVIDES THIS PUBLICATION WITHOUT DEFECT AND DOES NOT ASSUME ANY WARRANTY WHATSOEVER, EXPRESSLY OR IMPLICITLY, INCLUDING BUT NOT LIMITED TO THE LEGAL GUARANTEE OF MARKETABILITY OF A PRODUCT OR ITS SUITABILITY FOR ANY PARTICULAR PURPOSE. In some countries, the exclusion of express or tacit guarantees is not permitted in certain transactions. Therefore, this statement may not be valid for you.
This publication may contain technical inaccuracies or typographical errors. The information contained herein is periodically changed; these changes are included in higher versions. Improvements or changes to the described products or programs can be made at any time.
The references to products, programs and services contained in this software documentation do not mean that the manufacturer intends to make them available in all countries where such software documentation is offered. No reference to a product, program or service states or implies that only this product, programme or service may be used. Any product, program or service with the same features that does not violate any intellectual property restrictions may be used instead. When using products, programs and services other than those expressly recommended by the manufacturer, the user is responsible for assessing and testing their functionality.
Technical Support from Lexmark is available at http://support.lexmark.com.
Information about the Lexmark Privacy Policy for using this product can be found at www.lexmark.com/privacy.
Underground www.lexmark.com Get information about accessories and downloads.
© 2018 Lexmark International, Inc.
All rights reserved.
August 2019

Lexmark and the Lex mark logo are trademarks or registered trademark of Lex Mark International, Inc., registered in the United States and/or other countries.
Google Cloud Print and Google Chrome are trademarks of Google Inc. Android and Google Play are trademarks of Google LLC.
Macintosh, Mac, App Store and Safari are trademarks of Apple Inc. AirPrint and the AirPrint logo are trademarks of Apple, Inc.
Microsoft, Windows and Internet Explorer are registered trademarks or marks of the Microsoft group in the United States and other countries.
Mopria®, the Moprian® logo and the MoPria Alliance logo are registered trademarks of Mopriarian Alliance, Inc. in the United States and other countries. Unauthorised use is strictly prohibited.
PCL® is a registered trademark of Hewlett-Packard Company. PCL is the Hewlett-Packard Company's designation for a set of printer commands (language) and functions contained in the Printer Products. This printer was developed with regard to compatibility with the PCL language. The printer thus recognizes PCL commands used in various application programs and emulates the functions corresponding to the commands.
PostScript is a registered trademark of Adobe Systems Incorporated in the United States and/or other countries.
All other brands are the property of their respective owners.
All license notices for this product can be found in the CD:\NOTICES directory of installation software CD.
Modell 210, 230, 235, 295, 410, 430, 438, 630, 635, 695, 830
Postal address Lexmark Deutschland GmbH
Post office 1560 63115 Dietzenbach
Addresse Lexmark Deutschland GmbH Max Planck Street 12 63128 Dietzenbach
Phone 0180 - 564 56 44 (product information)
Telephone 01805- 00 01 15 (Technical customer service)
E-mail [email protected]
The following measurements were carried out in accordance with ISO 7779 and reported according to ISO 9296.
Type of equipment 4064

Average sound pressure level within 1 metre in dBA
Printing 56 (MS725dvn); 57 (B2865dw, M5255, MS821n, MS822dn, M8823n,MS823dn); 58 (M5270),
Ready 28 (MS725dvn); 14 (B2865dw, M5255, M 5270, MS821n, MS822de, MS8823n,MS823dn, M825dn and MS826de)
Change of values reserved. Underground www.lexmark.com Get the current values.
Electronic Waste Regulation
The WEEE logo identifies certain recycling programs and processes for electronic products in countries of the European Union. We promote the recycling of our products.
For questions about recycling opportunities, visit the Lexmark website at www.lexmark.com the telephone number of your local sales office.
Do not dispose of the printer and consumables like normal household waste. Contact local authorities for information on disposal and recycling.
This symbol identifies parts that are sensitive to static charges. Touch the areas around these icons only after you have touched a metal object in a remote area to the symbol.
To avoid damage from electrostatic discharge when performing maintenance work, such as removing paper jams or replacing consumables, touch the exposed metal frame of the printer before accessing or touching the interior area of the printing machine even if it does not display the icon.
MS825dn, MS826de

All Lexmark products with the ENERGY STAR® icon on the product or start screen are certified and meet the Energy STAR requirements of the Environmental Protection Agency (EPA) in their configuration.
Operating temperature and relative humidity 15.3 to 32.2 °C and 8 to 80 % relative hose 1.1 to 35 °C, and 8-80% relative hurdle Maximum lamp temperature at humicity 2: 22.8 °C Non-condensing environment
Long-term storage of printer/cassette/exposure unit1
Short-term shipment of printer/cassette/exposure unit
-40 bis 43,3 °C (-40 bis 110°F)
1 The shelf life of consumable materials is about 2 years. This information is based on storage in a standard office environment at 22 °C and 45 % humidity.
2 The wetting temperature is determined by the air temperature and relative humidity.
The printer is certified in the USA and complies with DHHS 21 CFR Chapter I requirements for Class I (1) laser products, but elsewhere it is certified as a class I laser product that meets the requirements of IEC 60825-1: 2014.
Laser products of Class I are not considered dangerous. The laser system and printer are designed so that under normal operating conditions, user maintenance or prescribed service conditions humans will not be exposed to laser radiation exceeding the values of Class I. The printer has a printing head unit that cannot be maintained and is equipped with a laser of the following specifications.
The following table shows the energy consumption of the product.

Mode Description Power consumption (Watt)
The product generates a printed output based on electronic input.
800 (MS725dvn); 670 (M5255, MS821n, MS821dn); 700 (MS822de); 770 (B2865dw, MS823n, MS823dn); 830 (M5270, MS825dn, MS826de)
The product generates a printed output of original printed documents.
Scanning The product scans printed documents. N/V
Ready The product is waiting for a print job. High power consumption: 95 (MS725dvn); 39 (M5255, MS821n, MS822dn, M822de); 34 (B2865dw, MS8823n, S823dn); 38.5 (M 5270, MS8025dn and MS8626de) Low power consumption 75 (MS7225drn), 21.5 (S5255 and MS811nds, MS222drs); 20 (B2965df, MS8323n and M823ddn); 21 (M5170, S8725drs).
Energy saving mode The product is in a high
1.3 (MS725dvn); 1.4 (M5255, M5270, MS821n, MS822dn, M8825dn and M8626de); 1.6 (B2865dw, M8923n and R8022dn)
Energy saving mode.
Sleep mode The product is in a low energy savings mode.
From The product is connected to a power outlet, but the mains switch is off.
The electricity consumption listed in the previous table represents average time measurements. The spontaneous power consumption can be significantly higher than the average.
Change of values reserved. Underground www.lexmark.com Get the current values.
This product has an energy saving mode called sleeping. In sleep mode, energy is saved by reducing the amount of power consumed during prolonged inactivity. Sleep mode is automatically activated if the product has not been used for a specified period of time, also known as sleep time limit.
Factory sets the product sleep time limit as follows (in minutes): 15
The configuration menus can set the time limit for sleep mode to a value between 1 minute and 120 minutes. Setting the sleep time limit to a low value will reduce energy consumption, but it can increase product response times. At a high value for the time limit, although the reaction time is short, at the same time more energy is consumed.
0,2 · 0,2

This product has a very low power mode called sleep mode. In sleep mode, all other systems and devices are safely switched off.
Sleep mode may be activated by one of the following methods:
Factory sleep time lock for this product in all countries or regions. 3 days
The time the printer waits after an order is printed and before it goes to sleep mode can be set to a period between one hour and one month.
If this printer consumes a small amount of power even when turned off, you will need to unplug the plug from the socket in order to completely eliminate energy consumption.
Sometimes it makes sense to estimate the total energy consumption of the product. Since the energy consumption values are given in the unit of watts, it is necessary to multiply the power consumption by the time spent on each mode. In this way, the total energy consumption can be calculated. The total energy consumption of the printer is the sum of the power consumption values for each mode.
This section contains legal information that applies only to Wi-Fi models.
Information on whether your device is a WLAN model can be found at http://support.lexmark.com.
WLAN models may contain the following modular component(s):
The output current radiation of this device is well below the limits for radio frequency radiation set by FCC and other regulatory authorities. A minimum distance of 20 cm between the antenna and operators shall be maintained to meet FCC and other regulatory requirements for radio frequency radiation.

This printer complies with the protection provisions set out in EC Directive 2014/53/EU on the approximation and harmonisation of Member States’ legislation regarding radio equipment.
The manufacturer of this product is: Lexmark International, Inc., 740 West New Circle Road, Lexington, KY, 40550 USA. The authorised representative is: Lexmark International Technology Hungária Kft., 8 Lechner Ödön fasor, Millennium Tower III, 1095 Budapest, Hungary. A declaration of conformity with the requirements of the Directives shall be provided by an authorised representative or may be made available at: www.lexmark.com /en us/via/Regulatory-compliance/european-union-declaration-of-conformity.html are called up.
Conformity is indicated by the CE mark:
This radio equipment shall be used only indoors. Outdoor use is prohibited. This restriction applies to all countries listed in the table below:

AT BE BG CH CY CZ DE DK EE
EL ES FI FR HR HU IE IS IT
LI LT LU LV MT NL NO PL PT
RO SE SI SK TR United Kingdom
This radio equipment transmits in one of the following frequency ranges: 2,4 GHz (2.412 – 2.472 GHz in the EU) or 5 GHz (5.15 – 5.35 or 5.47 – 5.725 in the Union). The maximum e.i.r.p output power, including antenna gain, is ≤ 20 dBm for both ranges.
(EG)
This product meets the protection requirements of EC Council Directives 2014/30/EU, 2014/35/EU and 2011/65/EU on approximation and harmonisation of Member States’ laws with regard to:

electromagnetic compatibility, the safety of electrical components designed for use in specific voltage ranges and restrictions on the use of certain hazardous substances in electrical and electronic equipment.
The manufacturer of this product is: Lexmark International, Inc., 740 West New Circle Road, Lexington, KY, 40550 USA. The authorised representative is: Lexmark International Technology Hungária Kft., 8 Lechner Ödön fasor, Millennium Tower III, 1095 Budapest, Hungary. A declaration of conformity with the requirements of the Directives shall be provided by an authorised representative or may be made available at: www.lexmark.com /en us/via/Regulatory-compliance/european-union-declaration-of-conformity.html are called up.
This product meets the limits of EN 55022 and EN55032 for Class A equipment, and safety requirements according to EN 60950-1 or EN 62368-1.
This product meets the emission limits of EN55022 and EN5 5032 for Class A equipment, and immunity requirements of standard EN53024. This product must not be used in residential areas.
This is a Class A device. In residential areas, this device can cause interference with radio and television reception. The user must take appropriate measures in this case.


Replace 108 Import configuration file
use 18 documents, print
Recover 97 FCC notes 223 Find additional information about the printer 9 firmware
via a computer 44 from a mobile device 44, 45
Meaning of status 16 Use memory card 191 Install option cards 193 Install options
Printer hard disk 194 Insert the 2100 sheet tray 200 Installing printer software 216 Instruct compartment 199 Internal option not recognized 150 internal options
Configure 19 Edit Contacts 23 Edit User Group 23 Emissions Notice 219, 223 Enable magnification mode 25 activate personal identification numbers 25 activate spoken passwords 25 actuate USB port 149 encryption of printer hard drive 97 envelopes
print under 45 folded paper 161 List of font examples
Firmware Card 190 Flash Memory 190 Font Card 190 Internal Solutions Port 190 Printer Hard Drive 190 In-house Options, Add
add 22 delete 23 edit 23
charge 34 energy-saving setting
Printer driver 216 Internal Solutions Port
Saving mode 126 Sleep mode 126 Energy saving mode 126 Erasing the memory
Printer driver 216 Stopped orders 47
print under Macintosh 47 on Windows Print 47 Sleep Mode
Erase the non-volatile memory 96 erase printer disk memory 96 delete printer memory 96, erase volatile storage 96 Ethernet port 13 export a configuration file
Avoid 128 traffic jams, fix
in the standard shelf 136
18 Use icons to adjust 18 use 17 start screen icon 17 hot roll fixers
L Letters
Replace 113 humidity around the printer 221
load 34, 2100-sheet compartment 29 Lexmark Mobile Print
Server 216 Export log files 62 Export a configuration file 62
use 44 connecting compartments 35 load
display 18 Recognition of paper jam areas 130 exposure unit
2100 sheet tray 29 letters in 2100-sheet




Pages referenced in this manual — manufacturer, support and downloads.
Owners and our team usually reply within a day — and your question helps the next person too.
Be the first to ask — other owners or our team will answer.